You are not logged in.

#1 2019-12-10 03:34:53

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 7,146
Website

Lithium test iso available

We now have an iso file available which will install the current testing version of BunsenLabs Lithium. There are still many details to be ironed out, but the basic system seems to be working. Any feedback and bug reports will be most welcome! This iso file is hosted on a Google Drive account, but of course the eventual official release will be available from the BunsenLabs website.

lithium-dev-4-amd64.hybrid.iso:
https://drive.google.com/open?id=1IQGyL … Eds-jL9Uvj
sha256sum:
c5fbb45259fe40d2370f4bc6630db4edc7d96c01b0e51e83b3654392885b1116

NOTES:

1) This testing iso is not yet an official release, and still uses the experimental repository, so should not be considered ready for general use.

2) The BunsenLabs Backports repository is not yet available, so attempts to enable it from the 'bl-welcome' script will result in errors.

3) Similarly, the bunsen-images-extra package is not yet available.

A discussion thread has been started here.

Last edited by johnraff (2019-12-11 02:06:20)


...elevator in the Brain Hotel, broken down but just as well...
( a boring Japan blog (currently paused), idle Twitterings and GitStuff )

Introduction to the Bunsenlabs Lithium Desktop

Offline

#2 2019-12-10 04:16:16

hhh
Meep!
Registered: 2015-09-17
Posts: 10,236
Website

Re: Lithium test iso available

Downloaded, ran the checksum, ran it live and installed it. It runs great, and looks great too, on my hardware. Please post your results, hardware info and feedback in the following development thread for now, we can split bugs off to their own threads as necessary...

https://forums.bunsenlabs.org/viewtopic.php?id=6321

@The Team and especially @John, great job!

Offline

#3 2019-12-10 04:22:21

cog
Cattle Baron
From: New Mexico, USA
Registered: 2015-10-27
Posts: 465
Website

Re: Lithium test iso available

^ Great job guys.  It's running great on a mostly intel ThinkPad over here.

~ > lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-V (rev 21)
01:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)
03:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Mars [Radeon HD 8670A/8670M/8750M] (rev 81)

Last edited by cog (2019-12-10 04:24:25)


Morning, Bunny.  Well, I can see you're in good health.  -George Washington McLintock! (John Wayne, AKA the Duke)

Offline

#4 2019-12-10 04:39:13

linux_user
Member
Registered: 2016-11-04
Posts: 461

Re: Lithium test iso available

Congratulations to all of us and special thanks to the team worked behind this. Rockstars!

I shall be trying it as well and post my feedback.

Last edited by linux_user (2019-12-10 05:21:48)


"Blind faith to authority is the greatest enemy of truth."

Offline

#5 2019-12-10 12:03:23

clusterF
Member
Registered: 2019-05-07
Posts: 539

Re: Lithium test iso available

Nice, will test this out in the next few days. Congrats to all involved.

Offline

#6 2019-12-10 13:05:23

iMBeCil
WAAAT?
From: Edrychwch o'ch cwmpas
Registered: 2015-09-29
Posts: 767

Re: Lithium test iso available

Excellent! Thanks to all devs involved for new version.


Postpone all your duties; if you die, you won't have to do them ..

Offline

#7 2019-12-11 02:07:04

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 7,146
Website

Re: Lithium test iso available

OP updated with a note about the as-yet non-existent BL backports repo and bunsen-images-extra package.


...elevator in the Brain Hotel, broken down but just as well...
( a boring Japan blog (currently paused), idle Twitterings and GitStuff )

Introduction to the Bunsenlabs Lithium Desktop

Offline

#8 2019-12-11 22:55:56

BigBrownHawk
Member
Registered: 2016-02-08
Posts: 41
Website

Re: Lithium test iso available

Looks great! The window animation is very pleasing I must say. Installing in VirtualBox Version 6.0.6 r130049 went smooth. Took me a few steps to get the guest additions installed properly as I had to get dkms, linux-headers, and build-essentials.

sudo apt install dkms linux-headers-$(uname -r) build-essential

inserted the guest additions cd

sudo sh /media/cdrom0/VBoxLinuxAdditions.run

Rebooted, and off to the races.

Tried to install LAMP off the bat with the bunsenlabs welcome script but, as I see in the OP notes this sounds like it's still being worked on.

Cheers!

Last edited by BigBrownHawk (2019-12-16 21:45:45)

Offline

#9 2019-12-12 03:45:00

hhh
Meep!
Registered: 2015-09-17
Posts: 10,236
Website

Re: Lithium test iso available

@BigB-Hawk, nice dkms quick-walk-through. Thanks for the feedback!

Offline

#10 2019-12-12 05:14:57

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 7,146
Website

Re: Lithium test iso available

BigBrownHawk wrote:

Tried to install LAMP off the bat with the bunsenlabs welcome script but, as I see in the OP notes this sounds like it's still being worked on.

Actually, the LAMP install from bl-welcome should work - it doesn't use the backports repo.

If you have time, could you give us some more detail on what went wrong? Thanks!


...elevator in the Brain Hotel, broken down but just as well...
( a boring Japan blog (currently paused), idle Twitterings and GitStuff )

Introduction to the Bunsenlabs Lithium Desktop

Offline

#11 2019-12-12 10:56:57

gennargiu
Member
From: Napoli
Registered: 2019-11-02
Posts: 14
Website

Re: Lithium test iso available

Hi i have a download new image iso lithium for testing in virtualbox on mx linux. Its a wonderful and work perfect smile

gennaro

iozLyGW

Last edited by gennargiu (2019-12-12 11:05:37)


Bunsenlabs Helion 5

Offline

#12 2019-12-12 22:59:41

BigBrownHawk
Member
Registered: 2016-02-08
Posts: 41
Website

Re: Lithium test iso available

johnraff wrote:
BigBrownHawk wrote:

Tried to install LAMP off the bat with the bunsenlabs welcome script but, as I see in the OP notes this sounds like it's still being worked on.

Actually, the LAMP install from bl-welcome should work - it doesn't use the backports repo.

If you have time, could you give us some more detail on what went wrong? Thanks!

Funny enough these were my exact notes that I had in notepad++ :

After installing LAMP had these errors
        I also didn't enable debian backport repository
    Package bunsen-images-extra is not available, but is referred to by another package
    This may mean that the package is missing, has been obsoleted, or
    is only available from another source

And looking at the first test install, hostname: blabslithiumdev, I didn't enable bunsenlabs backports either.


Its a rainy day here before the holiday party so I decided to do a fresh install.

Here are some notes on my steps, hostname - blabslithiumlampdev:

... welcome to BunsenLabs Linux! :)....
Enter

A Warning
While FOSS...
I understand

Would you like to upgrade your software?
Y
Do you want to continue
Y

INSTALL BUNSEN EXTRA IMAGES
y (sure why not)

INSTALL JAVA SUPPORT
N

Would you like to enable the Debian Backports repositories?
y

Would you like to enable the BunsenLabs Backports repositories?
y

Flash Browser Plugin?
N

Dropbox
N

INSTALL DEVELOPMENT PACKAGES... would you like to view these options/screens?
y

INSTALL VERSION CONTROL TOOLS
y

Would you like to install LAMP stack?
y

Would you like to allow .htaccess files under /var/www/html.... symlink to a directory within your home directory?
y

...install debian packaging tools?
y 

INSTALL PACKAGES
...
These packages will be installed:
bunsen-images-extra
bunsen-meta-vcs
bunsen-meta-lamp
bunsen-meta-packaging
... thesee functions will be executed after installing packages: configureApache...
Y

...
Ign:5 https://eu.pkg.bunsenlabs.org/debian buster-backports InRelease
Err:13 https://eu.pkg.bunsenlabs.org/debian buster-backports Release
	404 Not Found [IP: 78.47.156.207 443]
Reading package lists
	There were problems during the update.
	
	Press "d" for details (q to quit)
d

ERROR MESSAGE:
E: The repository 'https://pkg.bunsenlabs.org/debian buster-backports Release' does not have a Release file.

	Would you like to quit now, or continue anyway?
	(Be careful!)
	Enter "q" to quit, "c" to continue:
c

Continuing in spite of update problems...
...
Package bunsen-images-extra is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source

	There were problems installing bunsen-images-extra bunsen-meta-vcs bunsen-meta-lamp bunsen-meta-packaging
	
	Press "d" for details (q to quit)
d

ERROR MESSAGE:
E: Package 'bunsen-images-extra' has no installation candidate

	WOuld you like to quit now, or continue anyway?
	... "c" to continue:
c 

Failed to install bunsen-images-extra bunsen-meta-vcs bunsen-meta-lamp bunsen-meta-packaging.
	There is a problem somewhere. Check
	/home/brownhawk/.cache/bunsen-welcome/bl-welcome.log for possible hints, or ask on the BunsenLabs forum and not at the strip club.
	
	Press any key to continue.

   
So I enabled both debian backports and blabs backports. And doesn't seem to work when I try to install LAMP again. I'm also at work and behind a decent firewall, so it can be on my end.

Offline

#13 2019-12-12 23:43:15

rbh
Member
From: Sweden/Vasterbotten/Rusfors
Registered: 2016-08-11
Posts: 561

Re: Lithium test iso available

BigBrownHawk wrote:

And doesn't seem to work when I try to install LAMP again. I'm also at work and behind a decent firewall, so it can be on my end.

No problem for me to install LAMP. If you could you install someting other from repository, you know the firewall does not stop you. It should not...


// Regards rbh

Offline

#14 2019-12-13 01:28:34

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 7,146
Website

Re: Lithium test iso available

@BigBrownHawk bunsen-images-extra and the BunsenLabs backports repo are unavailable at this time, so trying to use them will cause errors. (Debian Buster backports are OK.)

If you answer NO there, then the LAMP install part ought to work.


...elevator in the Brain Hotel, broken down but just as well...
( a boring Japan blog (currently paused), idle Twitterings and GitStuff )

Introduction to the Bunsenlabs Lithium Desktop

Offline

#15 2019-12-14 15:26:06

Sector11
Conky 1.9er Mod Squid
From: Upstairs
Registered: 2015-08-20
Posts: 6,237

Re: Lithium test iso available

Found it ... grabbing it now.


The sun will never set if you keep walking towards it. - my son
Being positive doesn't understand physics.
_______________________________
Debian 10 Buster = SharpBang ♯!

Offline

#16 2019-12-18 03:29:50

BigBrownHawk
Member
Registered: 2016-02-08
Posts: 41
Website

Re: Lithium test iso available

Tried it at home too with what I did from above. No luck with the LAMP install from welcome script I can't connect to that EU address.

I'm in California right now btw.


johnraff wrote:

@BigBrownHawk bunsen-images-extra and the BunsenLabs backports repo are unavailable at this time, so trying to use them will cause errors. (Debian Buster backports are OK.)

If you answer NO there, then the LAMP install part ought to work.


I'll re-run my steps and try what you are suggesting. Thanks for the help!

Offline

#17 2019-12-21 20:43:49

dove
Member
Registered: 2016-03-21
Posts: 62

Re: Lithium test iso available

I loaded lithium on a itx box I use as a kodi box for my TV. Although the lost config. for autostart, menu edit ect I didn't like but not the end of the world.
What is a major problem is tint2. I just changed bottom to top for placement and it worked for a few reboots. I started it today and tint2 was gone, I "alt f2" and started tint2 and it was completely different tint2 on bottom. I pasted a new Default tint2rc config. file in now empty file. but won't autostart. Is this a experimental bug or something I did?

Offline

#18 2019-12-21 22:19:27

damo
....moderator....
Registered: 2015-08-20
Posts: 6,124

Re: Lithium test iso available

Are you aware that there are different Openbox session options now? At the login you can choose the new BL session (default) or the old Openbox session. They use different configs and autostart, so perhaps you changed something in the wrong one?


Be Excellent to Each Other...
The Bunsenlabs Lithium Desktop » Here
FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Offline

#19 2019-12-21 22:54:16

dove
Member
Registered: 2016-03-21
Posts: 62

Re: Lithium test iso available

I did modify

/etc/lightdm/lightdm.conf

to autologon. It booted up fine and suddenly it didn't?

Offline

#20 2019-12-26 15:35:01

bard
Member
Registered: 2019-12-22
Posts: 8

Re: Lithium test iso available

Hi all,

My report about the test iso:

- 2006 Macbook: flawless install (about 20 mn...) and working great (little slow because of the 1 Gb RAM but still fine).

- Samsung Q35: Kernel panic. Couldn't even run the live nor failsafe options, so went back to helium for now but still working on it.
Error screen (hope I'm doing it the right way...):
IMG-20191224-005557.jpg

Let me know if I can try something to solve this.

Last edited by bard (2019-12-26 15:38:33)

Offline

#21 2019-12-26 23:19:18

manyroads
Member
From: around here, somewhere
Registered: 2019-04-16
Posts: 62
Website

Re: Lithium test iso available

FWIW The live iso fails to boot on my Dell i5 Gen10 Intel chipset.  It seems to die when attempting to load lightdm.  The following are the particulars on my machine albeit running a special Debian version of MXLinux.  Thus far all Debian-based distros seem to dislike my Intel Gen10 chipset.

System:    Host: mark-inspiron Kernel: 5.3.0-2-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.3.0-2-amd64 
           root=UUID=60dac46d-5e46-4db0-a5d7-c89cfacc4bfd ro quiet hush 
           Desktop: Xfce 4.14.1 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 
           Distro: MX-19_x64 patito feo October 21  2019 base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Laptop System: Dell product: Inspiron 5493 v: N/A serial: <filter> Chassis: 
           type: 10 serial: <filter> 
           Mobo: Dell model: 0M4FW1 v: A00 serial: <filter> UEFI: Dell v: 1.3.0 date: 10/24/2019 
Battery:   ID-1: BAT0 charge: 39.9 Wh condition: 39.9/42.0 Wh (95%) volts: 13.0/11.4 
           model: BYD DELL 1VX1H9A type: Li-ion serial: <filter> status: Full 
           Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M510 serial: <filter> 
           charge: 55% (should be ignored) rechargeable: yes status: Discharging 
CPU:       Topology: Quad Core model: Intel Core i5-1035G1 bits: 64 type: MT MCP arch: Ice Lake 
           family: 6 model-id: 7E (126) stepping: 5 microcode: 48 L2 cache: 6144 KiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19046 
           Speed: 1113 MHz min/max: 400/3600 MHz Core speeds (MHz): 1: 924 2: 1502 3: 1301 
           4: 1180 5: 1482 6: 1505 7: 1465 8: 1089 
           Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 
           chip ID: 8086:8a56 
           Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa 
           resolution: 1920x1080~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics (Ice Lake 4x8 GT1) v: 4.5 Mesa 19.2.1 
           compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1f.3 
           chip ID: 8086:34c8 
           Sound Server: ALSA v: k5.3.0-2-amd64 
Network:   Device-1: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet 
           vendor: Dell RTL810xE driver: r8169 v: kernel port: 3000 bus ID: 01:00.0 
           chip ID: 10ec:8136 
           IF: eth0 state: down mac: <filter> 
           Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: Dell 
           driver: ath10k_pci v: kernel port: 3000 bus ID: 02:00.0 chip ID: 168c:0042 
           IF: wlan0 state: up mac: <filter> 
           Device-3: Qualcomm Atheros type: USB driver: btusb bus ID: 1-10:5 chip ID: 0cf3:e009 
Drives:    Local Storage: total: 953.87 GiB used: 467.84 GiB (49.0%) 
           ID-1: /dev/nvme0n1 vendor: Silicon Power model: SPCC M.2 PCIe SSD size: 953.87 GiB 
           block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> 
           rev: ECFM22.5 scheme: GPT 
Partition: ID-1: / raw size: 41.13 GiB size: 40.24 GiB (97.82%) used: 14.11 GiB (35.1%) fs: ext4 
           dev: /dev/nvme0n1p5 
           ID-2: swap-1 size: 9.15 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/nvme0n1p4 
Sensors:   System Temperatures: cpu: 68.0 C mobo: N/A 
           Fan Speeds (RPM): cpu: 2595 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/antix.list 
           1: deb http://la.mxrepo.com/antix/buster/ buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian/ buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian/ buster main contrib non-free
           2: deb http://deb.debian.org/debian-security/ buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/home:Head_on_a_Stick:Picom.list 
           1: deb http://download.opensuse.org/repositories/home:/Head_on_a_Stick:/Picom/Debian_10/ /
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ buster main non-free
           2: deb http://mxrepo.com/mx/testrepo/ buster test
           3: deb http://mxrepo.com/mx/testrepo/ buster test
           4: deb http://mxrepo.com/mx/testrepo/ buster test
           5: deb http://mxrepo.com/mx/testrepo/ buster test
           6: deb http://mxrepo.com/mx/testrepo/ buster test
           7: deb http://mxrepo.com/mx/testrepo/ buster test
           8: deb http://mxrepo.com/mx/testrepo/ buster test
           9: deb http://mxrepo.com/mx/testrepo/ buster test
           10: deb http://mxrepo.com/mx/testrepo/ buster test
           11: deb http://mxrepo.com/mx/testrepo/ buster test
           No active apt repos in: /etc/apt/sources.list.d/opera-stable.list 
           Active apt repos in: /etc/apt/sources.list.d/skype-stable.list 
           1: deb [arch=amd64] https://repo.skype.com/deb stable main
           No active apt repos in: /etc/apt/sources.list.d/various.list 
           Active apt repos in: /etc/apt/sources.list.d/vivaldi.list 
           1: deb http://repo.vivaldi.com/stable/deb/ stable main
Info:      Processes: 251 Uptime: 3m Memory: 23.33 GiB used: 1.58 GiB (6.8%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 
           running in: quick-system-in inxi: 3.0.36 

Edit: Debian 10.2 also dies on the table of Intel Gen10 core i5.

Last edited by manyroads (2019-12-26 23:56:57)


Pax vobiscum,
Mark Rabideau - ManyRoads
dwm, bspwm, hlwm, openbox & xfce on Arch ~ Reg. Linux User #449130
"For every complex problem there is an answer that is clear, simple, and wrong." -- H. L. Mencken

Offline

#22 2019-12-28 14:44:29

Colonel Panic
Member
Registered: 2018-11-13
Posts: 176

Re: Lithium test iso available

Hi everyone,

I managed to install it and it's working well (so far). I've installed mpv, the console media player,and am currently listening to a 320kbps stream for a BBC radio station (Radio 2), and have changed the conky configuration to a more generic one.

I'd like to add some more typefaces to use in word processors such as LibreOffice Writer, but that probably belongs elsewhere on the forum

The computer spec is this; Packard Bell iMedia 6020 (from 2006) with an AMD Athlon 3800+ CPU (single core), 4 GB of RAM and a 250 GB hard drive.

Last edited by Colonel Panic (2019-12-28 14:51:58)

Offline

#23 2019-12-30 00:50:49

hhh
Meep!
Registered: 2015-09-17
Posts: 10,236
Website

Re: Lithium test iso available

@El Capitain con Panic, thanks for the feedback!

Please report if you have any issues, especially a kernel panic. *smirk*

Sorry, dad joke in full effect.

Offline

#24 2020-01-05 00:08:25

damo
....moderator....
Registered: 2015-08-20
Posts: 6,124

Re: Lithium test iso available

rbh wrote:

Command "bl-xdg-autostart --list | more" gives some error and no list.

I don't see that. The next line in my output is "User folders update" - have you made any changes since installing?

EDIT: I see from your other post that you have upgraded from a previous install, not a fresh iso.

Last edited by damo (2020-01-05 00:10:53)


Be Excellent to Each Other...
The Bunsenlabs Lithium Desktop » Here
FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Offline

#25 2020-01-06 00:13:31

hhh
Meep!
Registered: 2015-09-17
Posts: 10,236
Website

Re: Lithium test iso available

^ In fact, I don't think anyone has tested the upgrade from helium to lithium in quite some time, this thread and the related ones are now a year old...

https://forums.bunsenlabs.org/viewtopic.php?pid=81524

https://forums.bunsenlabs.org/viewtopic.php?id=5547

Here are the posts regarding my upgrade, which is still my primary partition. Start here and keep reading the thread...

https://forums.bunsenlabs.org/viewtopic … 542#p81542

Offline

Board footer

Powered by FluxBB