You are not logged in.
Hi, i currently using BL Hellium on my ACER Aspire 4739.
The OS detected the GPU.
But when i check the hardware information especially the GPU using the command lspci -v -s 00:02.0 it only recognizes that my GPU memory size is just 256MB. I believe the integrated GPU got more than that.
I already removed the xserver-xorg-video-intel so it will use the builtin modesetting driver instead, but no result.
Is there any driver program needed to release the entire memsize?
here is my system information:
System Information
Manufacturer: Acer
Product Name: Aspire 4739
Version: V1.08
Serial Number: LXRP00C00113503D1E2500
UUID: 16F510DB-66A3-B041-90D2-E89A8FA4D9FD
Wake-up Type: Power Switch
SKU Number: Calpella_CRB
Family: Intel_Mobile
here is the CPU information:
*-cpu
description: CPU
product: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz
vendor: Intel Corp.
physical id: 2a
bus info: cpu@0
version: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz
slot: CPU
size: 1199MHz
capacity: 2400MHz
width: 64 bits
clock: 1066MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ssbd ibrs ibpb stibp kaiser tpr_shadow vnmi flexpriority ept vpid dtherm arat flush_l1d cpufreq
configuration: cores=2 enabledcores=2 threads=4
here is the GPU detail with lspci:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Core Processor Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 3050 [size=8]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
Here is with lshw:
*-display
description: VGA compatible controller
product: Core Processor Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 18
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:27 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:3050(size=8) memory:c0000-dffff
i tested with some steam games (that support both windows and linux, checked the Linux min sysreq, they fit my machine), they ran flawlesly when it used to be a windows 7. But they're lagging with the Linux.
Sorry for the bad english, thankyou.
EDIT:
checked with dmesg | grep drm and the output is:
[ 11.224615] [drm] Initialized
[ 12.006239] [drm] Memory usable by graphics device = 2048M
[ 12.006242] [drm] Replacing VGA console driver
[ 12.015356] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.015357] [drm] Driver supports precise vblank timestamp query.
[ 12.040299] [drm] RC6 disabled, disabling runtime PM support
[ 12.054547] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 12.056772] fbcon: inteldrmfb (fb0) is primary device
[ 12.812681] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 829.187520] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=50114 end=50115) time 202 us, min 763, max 767, scanline start 759, end 765
[ 1437.070858] [drm:ironlake_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 1437.070983] [drm:ironlake_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
it's written that my GPU got 2046MB of memory.
Last edited by katiusha (2018-12-13 12:54:43)
Offline
Thank you for replying.
Yes, i have 4gigs of RAM.
I do load the game fullscreen.
I also added and installed the backports (still lagging).
I tried compton -CG but the output is another composite manager is already running.
How to actually disable them?
Offline
Thank you for replying.
Yes, i have 4gigs of RAM.
I do load the game fullscreen.
I also added and installed the backports (still lagging).
I tried compton -CG but the output is another composite manager is already running.
How to actually disable them?
Menu -> Preferences -> Compositor -> Disable compositing
or
bl-compositor --stop
Be Excellent to Each Other...
The Bunsenlabs Lithium Desktop » Here
FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt «» BunsenLabs on DeviantArt
Offline