You are not logged in.

#601 2017-06-02 10:29:48

Steve
Member
Registered: 2017-01-03
Posts: 642

Re: Show us your conky

Thanks again Sector11, ill keep that in mind. Cheers.

Offline

#602 2017-06-03 12:31:41

searchone
Member
From: Walhalla
Registered: 2016-01-31
Posts: 107

Re: Show us your conky

My new old Conky

2conkys.th.png

My first conversion of the weather forecast! I just made two conkys.


English by Google - blame them, Ich bin Deutscher.

Offline

#603 2017-06-03 12:55:11

Sector11
Conky 1.9er Mod Squid
From: Upstairs
Registered: 2015-08-20
Posts: 5,838

Re: Show us your conky

@ searchone - and coming soon across the bottom of your screen:
2017-06-03_094732_Scrot11.md.jpg
Well, except the stuff on the left.
2017-06-03_094732_Scrot11-2.md.jpg
Nothing wrong with 2 conkys or 3 or 4 or ... devil


The sun will never set if you keep walking towards it. - my son
He has finished the chemo and rang the Gong!
Finished the radiation treatment and rang the Gong!
Now to finish the immunology treatments.

Online

#604 2017-06-03 13:32:25

searchone
Member
From: Walhalla
Registered: 2016-01-31
Posts: 107

Re: Show us your conky

@ Sector 11 - Yes, I know you have done a lot of work and made really fine weather forecasts! But the four days are enough for me. :-)


English by Google - blame them, Ich bin Deutscher.

Offline

#605 2017-06-13 11:34:37

Steve
Member
Registered: 2017-01-03
Posts: 642

Re: Show us your conky

Sector11 wrote:

Hey Steve, there are a few things you can do with your small screen.

1. Remove ",sticky" conky will only run on the desktop you start it on.  So you can run a different conky on each desktop.  Three desktops - startup script:

#!/bin/bash

killall conky

# Remove Sticky
# own_window_hints skip_taskbar,skip_pager,undecorated,below #,sticky

# Start with low sleep on highest desktop
# Increase sleep as desktop lowers to insure the conky is running before changing desktops.

wmctrl -s 2 && conky -c /path/to/desktop3/conky
sleep 5 && wmctrl -s 1 && conky -c /path/to/desktop2/conky
sleep 10 && wmctrl -s 0 && conky -c /path/to/desktop1/conky

There you have it 3 conkys on 3 different desktops.

So you decide they use to much in the wau of CPU  resources. OK lets change that conky on desktop3 to be in a window, start it, read it, close it.

In the conky: conky -c /path/to/desktop3/conky put ",sticky" back in and remove ",undecorated"

own_window_hints skip_taskbar,skip_pager,below,sticky #,undecorated

edit the start script:

#!/bin/bash

killall conky

# Remove Sticky
# own_window_hints skip_taskbar,skip_pager,undecorated,below #,sticky

# Start with low sleep on highest desktop
# Increase sleep as desktop lowers to insure the conky is running before changing desktops.

conky -c /path/to/desktop3/conky
sleep 5 && wmctrl -s 1 && conky -c /path/to/desktop2/conky
sleep 10 && wmctrl -s 0 && conky -c /path/to/desktop1/conky

now that conky will show in a window, like any other application, read it and close it.
https://cdn.scrot.moe/images/2017/05/30/2017-05-30_114607_Scrot11.th.png
If you want to read it again later in the day create a menu item in OpenBox to start it - read and close

Here's one I do not need all day long, nor every day and for the most part uses ${pre_exec ...} because most of vnstats data is historical and will not change - other than drop off the list in time.


Hi Sector11,

I had a go at doing the these scripts today, just the first script, undecorated.

I think i found an error in the script, missing an & to get the second desktop conky running? Would i be right in that or am i doing something wrong. I have it working after logout login and restart after putting the & in so many thanks for this. See below, that is how i configured my preference for the script.


#!/bin/bash

killall conky

# Remove Sticky
# own_window_hints skip_taskbar,skip_pager,undecorated,below #,sticky

# Start with low sleep on highest desktop
# Increase sleep as desktop lowers to insure the conky is running before changing desktops.

wmctrl -s 2 && conky -c /home/sc/.conkyrc &
sleep 5 && wmctrl -s 1 && conky -c /home/sc/.config/conky/conkyrc.myconky

Last edited by Steve (2017-06-13 11:35:52)

Offline

#606 2017-06-13 12:20:18

Nili
Member
From: $HOME/♫♪
Registered: 2015-09-30
Posts: 928
Website

Re: Show us your conky

searchone wrote:

My new old Conky
My first conversion of the weather forecast! I just made two conkys.

Very nice searchone. I think you've hit the sign just in the first shot. Congrat!


OS: FreeBSD & Devuan ~ WM: CWM & Fluxbox
Nothing beats peace and quiet - Tomoki Sakurai

Offline

#607 2017-06-13 12:30:42

unklar
Member
Registered: 2015-10-31
Posts: 1,016

Re: Show us your conky

@Steve

I'm not Sector11  tongue

correct would be at least 1 sec

(sleep 1 && wmctrl -s 2 && conky -c /home/sc/.conkyrc) &
(sleep 5 && wmctrl -s 1 && conky -c /home/sc/.config/conky/conkyrc.myconky) &

Last edited by unklar (2017-06-13 12:31:36)

Offline

#608 2017-06-13 12:36:40

Steve
Member
Registered: 2017-01-03
Posts: 642

Re: Show us your conky

Thankyou "Im not Sector 11'  wink

Seems to be a smoother transition now with those commands.

Offline

#609 2017-06-13 15:56:25

Sector11
Conky 1.9er Mod Squid
From: Upstairs
Registered: 2015-08-20
Posts: 5,838

Re: Show us your conky

Steve wrote:

Hi Sector11,

I had a go at doing the these scripts today, just the first script, undecorated.

I think i found an error in the script, missing an & to get the second desktop conky running? Would i be right in that or am i doing something wrong.

No you are correct it was an error on my part - it was a quick copy/paste/edit of my script from openbox's autostart file:

#!/bin/bash

killall conky

# Start with low sleep on highest desktop
# Increase sleep as desktop lowers to insure the conky is running before changing desktops.

# Commencez par un faible sommeil sur le bureau le plus élevé
# Augmenter le sommeil pendant que le bureau diminue pour s'assurer que le conky est en marche avant de changer de bureau.

# on desktop 5 only | not sticky | Use: wmctrl -s 4
################################


# on desktop 4 only | not sticky | Use: wmctrl -s 3
################################
	(sleep 0 && wmctrl -s 3 && conky -c /media/5/Conky/S12/S12_time_tm.conky) &
	(sleep 0 && wmctrl -s 3 && conky -c /media/5/Conky/S12/S12_time_L.conky) &
	(sleep 0 && wmctrl -s 3 && conky -c /media/5/Conky/S12/S12_time_R.conky) &


# on desktop 3 only | not sticky | Use: wmctrl -s 2
###############################
	(sleep 5 && wmctrl -s 2 && conky -c /media/5/Conky/easysid/colorfill.conky) &
	(sleep 5 && wmctrl -s 2 && conky -c /media/5/Conky/S11_Rem_Cal.conky) &
	(sleep 5 && wmctrl -s 2 && conky -c /media/5/Conky/S11_Dates.conky) &

# on desktop 2 only | not sticky | Use: wmctrl -s 1
###############################
	(sleep 7 && wmctrl -s 1 && conky -c /media/5/Conky/S12_TDClock/S12_TD_Clock.conky) &


# on desktop 1 only | not sticky | Use: wmctrl -s 0
###############################
	(sleep 11 && wmctrl -s 0 && conky -c /home/sector11/1_accuweather/S11_accu_tm_BAR_2016-full.conky) &
	(sleep 11 && wmctrl -s 0 && conky -c /home/sector11/1_accuweather/S11_accu_UVI.conky) &
	(sleep 11 && wmctrl -s 0 && conky -c /media/5/Conky/S11_thin_r2_side.conky) &
	(sleep 11 && wmctrl -s 0 && conky -c /media/5/Conky/S11_thin_l2_side.conky) &
	(sleep 11 && wmctrl -s 0 && conky -c /media/5/Conky/S11_Rem_Today.conky) &

# on all desktops | sticky | Use: wmctrl -s 0
##########################
	(sleep 12 && wmctrl -s 0 && conky -c /media/5/Conky/S11_DateTime_br.conky) &
	(sleep 12 && wmctrl -s 0 && conky -c /media/5/Conky/S11_Email_01.conky) &
	(sleep 12 && wmctrl -s 0 && conky -c /media/5/Conky/Eagle.conky) &

they all have a trailing &   big_smile


The sun will never set if you keep walking towards it. - my son
He has finished the chemo and rang the Gong!
Finished the radiation treatment and rang the Gong!
Now to finish the immunology treatments.

Online

#610 2017-06-13 16:08:48

Sector11
Conky 1.9er Mod Squid
From: Upstairs
Registered: 2015-08-20
Posts: 5,838

Re: Show us your conky

EDIT:  Totally misunderstood the context of "I'm not Sector11" Please excuse my babble below.  I've had a rough couple of days.

Steve wrote:

Thankyou "Im not Sector 11'  wink

Seems to be a smoother transition now with those commands.

You should say:  Thank you, I'm Steve - look out Sector11, I'm coming!  devil devil

You certainly don't need to be, me, PackRat, lowrider, wlourf, falldown, mrpeachy ohnonot, easysid, unklar, Nili or searchone or any of the other great conky people that frequent these halls.  If I missed anyone I apologize.  Some of us named above go back 5 or 6 years crossing conky paths.  I'm just a bit more visible as I'm 'always around conky threads helping where I can' and sometime sticking my nose in where it's not wanted ... just swat it if I do that.  wink

Last edited by Sector11 (2017-06-13 16:51:24)


The sun will never set if you keep walking towards it. - my son
He has finished the chemo and rang the Gong!
Finished the radiation treatment and rang the Gong!
Now to finish the immunology treatments.

Online

#611 2017-06-13 19:41:20

Nili
Member
From: $HOME/♫♪
Registered: 2015-09-30
Posts: 928
Website

Re: Show us your conky

Nowdays conky users have advanced a lot (notably with lua code).
Vindsl, S11, #!, conky pitstop, Arch Wiki/Forum also have helped massively with their contribution for almost a decade.

S11 for conky emperor. smile I come to #! 4/5 year ago exactly for S11 conk's, stayed for the community until today.
Kudos to S11, Teo etc conky-friends that never stops upgrading or posting new features. Yo guys have done always phenomenal works for keeping conky spirit alive. My contribution is just a bubble in the ocean.

Back on topic...
I'm still on a minimal conky

# CONKY #
use_xft yes
xftalpha 0.1
update_interval 2
total_run_times 0

own_window yes
own_window class desktop
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

double_buffer yes
minimum_size 180 15
maximum_width 180
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
alignment top_left
gap_x 20
gap_y 38
no_buffers yes
uppercase yes
cpu_avg_samples 2
net_avg_samples 1
override_utf8_locale yes
use_spacer none

default_color FFFFFF
color1 D4C3BA
color2 9B5070
color3 0D151D

minimum_size 180 20
TEXT
${font Ostrich Sans:pixelsize=80}${color2}${voffset 15}$nodename
${font Ostrich Sans:pixelsize=40}${color1}${voffset 15}Uptime: ${uptime_short}
${font Ostrich Sans:pixelsize=40}${color1}${voffset 15}Vol: ${exec amixer get Master -M | grep -oE "[[:digit:]]*%"}
${font Ostrich Sans:pixelsize=40}${color1}${voffset 15}Cpu: ${cpu cpu}%
${font Ostrich Sans:pixelsize=40}${color1}${voffset 15}/: ${fs_used_perc /}%
${font Ostrich Sans:pixelsize=40}${color1}${voffset 15}Mem: ${memperc}%

This time i use conky-std instead of conky-cli that i always used. Font in use ostrich-sans.
Preview of this minimal conky.

Best regards!


OS: FreeBSD & Devuan ~ WM: CWM & Fluxbox
Nothing beats peace and quiet - Tomoki Sakurai

Offline

#612 2017-06-14 00:46:07

PackRat
jgmenu user Numero Uno
Registered: 2015-10-02
Posts: 1,168

Re: Show us your conky

@Nili - that's a nice setup.

You start a Herbstluftwm thread yet (that's a hint if you haven't)? I didn't think you could get a conky and tint2 window to work very well with that window manager. That had to take some work; how about putting the configs in a thread.


You must unlearn what you have learned.
    -- yoda

Offline

#613 2017-06-14 02:23:44

Sector11
Conky 1.9er Mod Squid
From: Upstairs
Registered: 2015-08-20
Posts: 5,838

Re: Show us your conky

Nili wrote:

S11 for conky emperor. smile I come to #! 4/5 year ago exactly for S11 conk's, stayed for the community until today.
Kudos to S11, Teo etc conky-friends that never stops upgrading or posting new features. Yo guys have done always phenomenal works for keeping conky spirit alive. My contribution is just a bubble in the ocean.

Best regards!

No no, not emperor, Nooooooo thank you!  Do you know how many people want to stab or poison emperors?
I can hear them in the sub-forums now!

Conky Dude, OK, emperor no way  smile smile

And since you said such nice things about me and we've been chatting for 4 or 5 years now, how time flies when you're having fun, I hope to don't mind a few pointers for your conky.  Especially since I get a great font out of it as well.  Thank you for that.

Here's your code with some changes to make it a little more streamlined and comments about usage:
Well, the comments "unstreamline" it - but the streamlining us all below TEXT, so you get the idea.  smile

# pkill -xf "conky -c /media/5/conky/NiliOstrich.conky" &
# CONKY #

#	 you use ${font Ostrich Sans:pixelsize=80} only once - first line.
#	 turn it off with ${font} and the default font takes over:
xftfont Ostrich Sans:pixelsize=40
#	 so you do not require ${font Ostrich Sans:pixelsize=40} below TEXT at all.
use_xft yes
xftalpha 0.1
update_interval 2
total_run_times 0

own_window yes
#own_window class desktop ## error: own_window_class
#	 own_window_class desktop ## See "own_window_type"
#	 own_window_class = Manually set the WM_CLASS name. Defaults to "Conky".
own_window_type desktop
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
#	 minimum_size 180 15	## you have minimum_size twice
				## see just above TEXT
				## any commnd repeated and conky uses the last one.
maximum_width 180
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
alignment top_left
gap_x 20
gap_y 38
no_buffers yes
uppercase yes
cpu_avg_samples 2
net_avg_samples 1
override_utf8_locale yes
use_spacer none

#default_color FFFFFF
#color1 D4C3BA
#color2 9B5070
#color3 0D151D

default_color D4C3BA  ## you use this in every line except the first line
#color1 D4C3BA
color2 9B5070 ## this is used on the first line.
color3 0D151D

# ${colorX} like ${font XYZ} will stay constantant unless changed
# the only time you need another ${colorX} or ${font XYZ} call is
# to change the color or font turn them off ${color} ${font} which
# will then use the "default" values as seen above.

minimum_size 10 10		## S11 test S11 test S11 test S11 test ###
minimum_size 180 20		## this is the "minimum_size" that conky will use.

TEXT
${font Ostrich Sans:pixelsize=80}${color2}${voffset 15}$nodename${color}${font}
${voffset 15}Uptime: ${uptime_short}
${voffset 15}Vol: ${exec amixer get Master -M | grep -oE "[[:digit:]]*%"}
${voffset 15}Cpu: ${cpu cpu}%
${voffset 15}/: ${fs_used_perc /}%
${voffset 15}Mem: ${memperc}%

2017-06-13_224348_Scrot11.jpg

EDIT:  Bubbles in the ocean, maybe, if you say so, I won't argue, but some really beautiful classy bubbles!  wink

Last edited by Sector11 (2017-06-14 02:39:03)


The sun will never set if you keep walking towards it. - my son
He has finished the chemo and rang the Gong!
Finished the radiation treatment and rang the Gong!
Now to finish the immunology treatments.

Online

#614 2017-06-14 07:30:35

Nili
Member
From: $HOME/♫♪
Registered: 2015-09-30
Posts: 928
Website

Re: Show us your conky

S11, Oh so cool! you've put the useful info just like a real programmer, I am weak in this regard, Furthermore, I had not been touching conky for a while. I just used 5 lines from conky-cli.
The necessary #info helps to understand the purpose of each option. I need to exercised a lillte more with conky-settings.

I'm replacing your edits immediately right now. BIG Thanks!
S11 for conky-ambassador then big_smile

PackRat wrote:

@Nili - that's a nice setup.

You start a Herbstluftwm thread yet (that's a hint if you haven't)? I didn't think you could get a conky and tint2 window to work very well with that window manager. That had to take some work; how about putting the configs in a thread.

Hi PackRat! Thank you! To be honest haven't encountered a issue so far with hlwm+tint2+conky-std. I had more difficulty adjusting hlwm+dzen2.
I'm really surprised by tint2&hlwm combination. I'll edit my HLWM thread by adding new settings.

Last edited by Nili (2017-06-14 16:44:38)


OS: FreeBSD & Devuan ~ WM: CWM & Fluxbox
Nothing beats peace and quiet - Tomoki Sakurai

Offline

#615 2017-06-14 09:43:43

Steve
Member
Registered: 2017-01-03
Posts: 642

Re: Show us your conky

Sector11 wrote:

EDIT:  Totally misunderstood the context of "I'm not Sector11" Please excuse my babble below.  I've had a rough couple of days.

Took me a moment to catch on as well smile . Hope the days are getting better.

Offline

#616 2017-06-14 18:03:37

Sector11
Conky 1.9er Mod Squid
From: Upstairs
Registered: 2015-08-20
Posts: 5,838

Re: Show us your conky

Nili wrote:

S11, Oh so cool! you've put the useful info just like a real programmer, I am weak in this regard, Furthermore, I had not been touching conky for a while. I just used 5 lines from conky-cli.
The necessary #info helps to understand the purpose of each option. I need to exercised a lillte more with conky-settings.

I'm replacing your edits immediately right now. BIG Thanks!
S11 for conky-ambassador then big_smile

But I am the Conkystador - and play on the word: conquistador.  smile

conquistador ~ noun
1. an adventurer (especially one who led the Spanish conquest of Mexico and Peru in the 16th century)

So a Canuck that conquered an "argentina" and conky is a Conkystador (pronounced the same too).

Now - so glad to have helped you.  You do make some very interesting conkys.


The sun will never set if you keep walking towards it. - my son
He has finished the chemo and rang the Gong!
Finished the radiation treatment and rang the Gong!
Now to finish the immunology treatments.

Online

#617 2017-06-14 20:42:28

piper
Member
From: Cheektowaga, NY
Registered: 2017-05-01
Posts: 5
Website

Re: Show us your conky

My old and sloppy conk

conky:1.10.6-1

thumb-desktop.png



System:    Host: x1 Kernel: 4.11.5-towo.1-siduction-amd64 x86_64 (64 bit gcc: 6.3.0)
           Desktop: KDE Plasma 5.8.6 (Qt 5.7.1) dm: sddm,sddm
           Distro: siduction 17.1.0 Patience - kde - (201705301703)
Machine:   Device: desktop Mobo: Gigabyte model: GA-970A-UD3 v: x.x BIOS: Award v: F7 date: 10/22/2012
CPU:       Hexa core AMD FX-6300 Six-Core (-MCP-) cache: 12288 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 42297
           clock speeds: min/max: 1400/3500 MHz 1: 1400 MHz 2: 1400 MHz 3: 2500 MHz 4: 2000 MHz 5: 2000 MHz
           6: 1400 MHz
Graphics:  Card: NVIDIA GM204 [GeForce GTX 970] bus-ID: 01:00.0 chip-ID: 10de:13c2
           Display Server: X.Org 1.19.3 drivers: nvidia (unloaded: modesetting,fbdev,vesa)
           Resolution: 1920x1080@50.00hz
           GLX Renderer: GeForce GTX 970/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 375.66 Direct Rendering: Yes
Audio:     Card-1 NVIDIA GM204 High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0fbb
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
           driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:4383
           Sound: Advanced Linux Sound Architecture v: k4.11.5-towo.1-siduction-amd64
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: be00 bus-ID: 04:00.0 chip-ID: 10ec:8168
           IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: xoxoxoxo
           WAN IP: xoxoxox
           IF: enp4s0 ip-v4: 10.10.10.3 ip-v6-link: xoxoxoxo
Drives:    HDD Total Size: 8001.6GB (37.3% used)
           ID-1: /dev/sda model: Hitachi_HDS72202 size: 2000.4GB serial: JK11A8B9H5ZJ7F
           ID-2: /dev/sdb model: ST3000DM001 size: 3000.6GB serial: Z1F3W5MK
           ID-3: /dev/sdc model: ST3000DM001 size: 3000.6GB serial: Z1F571FA
           Optical: /dev/sr0 model: ATAPI iHAS324   W rev: HL1A dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 125x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 251G used: 97G (41%) fs: ext4 dev: /dev/sda10
           label: N/A uuid: e123704e-9715-4bda-9718-efd883bc66b9
           ID-2: /disks/disk2part1 size: 2.7T used: 568G (22%) fs: ext4 dev: /dev/sdb1
           label: N/A uuid: 192108a8-601e-4868-882d-97ad3042b5ee
           ID-3: /disks/disk3part1 size: 2.7T used: 1.7T (64%) fs: ext4 dev: /dev/sdc1
           label: N/A uuid: 0236d812-1bda-4b81-846a-19dff5d663b0
           ID-4: /disks/disk1part7 size: 49G used: 4.6G (10%) fs: ext4 dev: /dev/sda7
           label: N/A uuid: 88add8da-35fc-4ed7-891e-dd6a2d47f0ad
           ID-5: /disks/disk1part8 size: 49G used: 4.5G (10%) fs: ext4 dev: /dev/sda8
           label: N/A uuid: 7d03b61d-67a6-41e8-b842-45a5677b1004
           ID-6: /disks/disk1part6 size: 49G used: 5.5G (12%) fs: ext4 dev: /dev/sda6
           label: N/A uuid: 899ec3a7-cf2f-4167-97ab-4a82206d2efd
           ID-7: /disks/disk1part9 size: 49G used: 4.2G (10%) fs: ext4 dev: /dev/sda9
           label: N/A uuid: f66c7ff9-767d-4c36-9f73-853fa787b77a
           ID-8: /media/sda2 size: 404G used: 42G (11%) fs: fuseblk dev: /dev/sda2
           label: N/A uuid: 6EE279C7E27993D5
           ID-9: /disks/disk1part5 size: 1000G used: 393G (40%) fs: fuseblk dev: /dev/sda5
           label: N/A uuid: 1495E70670ADDCA3
           ID-10: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
           label: N/A uuid: 949c3074-8323-4cda-88eb-aba4fb00edf2
Sensors:   System Temperatures: cpu: 19.4C mobo: N/A gpu: 0.0:43C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 212 Uptime: 27 min Memory: 1529.2/16035.2MB
           Init: systemd v: 232 runlevel: 5 Gcc sys: 6.3.0
           Client: Shell (bash 4.4.121 running in yakuake) inxi: 2.3.11

Offline

#618 2017-06-14 23:18:40

Sector11
Conky 1.9er Mod Squid
From: Upstairs
Registered: 2015-08-20
Posts: 5,838

Re: Show us your conky

NICE conk(y)  lol lol

6 Core AMD ... GeForce GTX 970... three HDD's 8TB ...  Oh my!

You're missing the weather in inxi  smile

 14 Jun 17 @ 20:07:36 ~
   $ inxi -w
Weather:   Conditions: 61 F (16 C) - Clear Time: June 14, 8:07 PM -03

I can never figure out what "Clear Time" is,
- or "Cloudy Time" or "Raining Time" or "Partially Cloudy Time"

"Full Moon Time to Hide" I get!  devil

{dial dial dial}
[ring ..rin] Hi Antonoio ... yea yea,  get over to pipers place there after he goes to sleep . . . Right, and grab that computer!  Yea yea your retainer I know! Just get it. {click}  devil
Phone call, I know nothing about a phone call!

NICE Machine!


The sun will never set if you keep walking towards it. - my son
He has finished the chemo and rang the Gong!
Finished the radiation treatment and rang the Gong!
Now to finish the immunology treatments.

Online

#619 2017-06-15 00:09:26

piper
Member
From: Cheektowaga, NY
Registered: 2017-05-01
Posts: 5
Website

Re: Show us your conky

Sector11 wrote:

NICE conk(y)  lol lol

6 Core AMD ... GeForce GTX 970... three HDD's 8TB ...  Oh my!

You're missing the weather in inxi  smile

 14 Jun 17 @ 20:07:36 ~
   $ inxi -w
Weather:   Conditions: 61 F (16 C) - Clear Time: June 14, 8:07 PM -03

I can never figure out what "Clear Time" is,
- or "Cloudy Time" or "Raining Time" or "Partially Cloudy Time"

"Full Moon Time to Hide" I get!  devil

{dial dial dial}
[ring ..rin] Hi Antonoio ... yea yea,  get over to pipers place there after he goes to sleep . . . Right, and grab that computer!  Yea yea your retainer I know! Just get it. {click}  devil
Phone call, I know nothing about a phone call!

NICE Machine!

Oh snap ! how can I forget the weather wink

Very old machine, I have to upgrade real soon

Last edited by piper (2017-06-15 00:10:30)

Offline

#620 2017-06-15 00:48:09

Sector11
Conky 1.9er Mod Squid
From: Upstairs
Registered: 2015-08-20
Posts: 5,838

Re: Show us your conky

piper wrote:

Oh snap ! how can I forget the weather wink

Very old machine, I have to upgrade real soon

OLD?  That's not old, this is old:

 14 Jun 17 @ 21:38:19 ~
   $ s11
System:    Host: s12 Kernel: 3.16.0-4-amd64 x86_64 (64 bit gcc: 4.8.4) Desktop: Openbox 3.5.2 dm: lightdm
           Distro: BunsenLabs 8.7 bunsen-hydrogen
Machine:   Mobo: ECS model: MCP61M-M3 v: 7.0 Bios: American Megatrends v: 080015 date: 11/03/2010
CPU:       Triple core AMD Athlon II X3 450 (-MCP-) cache: 1536 KB
           flags: (lm nx sse sse2 sse3 sse4a svm) bmips: 19286
           Clock Speeds: 1: 800 MHz 2: 800 MHz 3: 2000 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 210] bus-ID: 02:00.0 chip-ID: 10de:0a65
           Display Server: X.Org 1.16.4 driver: nouveau Resolution: 1920x1080@60.00hz
           GLX Renderer: Gallium 0.4 on NVA8 GLX Version: 3.0 Mesa 10.3.2 Direct Rendering: Yes
Audio:     Card-1 NVIDIA MCP61 High Definition Audio driver: snd_hda_intel bus-ID: 00:05.0 chip-ID: 10de:03f0
           Card-2 NVIDIA High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 02:00.1 chip-ID: 10de:0be3
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card: NVIDIA MCP61 Ethernet driver: forcedeth port: d480 bus-ID: 00:07.0 chip-ID: 10de:03ef
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 500.1GB (24.1% used)
           ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB serial: WD-WCC2EMF62817
Partition: ID-1: / size: 20G used: 4.4G (24%) fs: ext4 dev: /dev/sda1
           ID-2: /media/sda7 size: 20G used: 1.1G (6%) fs: ext4 dev: /dev/sda7
           ID-3: /media/sda9 size: 20G used: 5.7G (31%) fs: ext4 dev: /dev/sda9
           ID-4: /media/5 size: 197G used: 43G (23%) fs: ext4 dev: /dev/sda5
           ID-5: /media/10 size: 142G used: 51G (38%) fs: ext4 dev: /dev/sda10
           ID-6: /home size: 20G used: 6.2G (34%) fs: ext4 dev: /dev/sda2
           ID-7: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
Sensors:   System Temperatures: cpu: 39.0C mobo: 38.0C gpu: 40.0
           Fan Speeds (in rpm): cpu: 2103 fan-2: 0 fan-3: 0
Weather:   Conditions: 59 F (15 C) - Clear Wind: From the NE at 6 MPH Humidity: 88%
           Pressure: 30.06 in (1018 mb) Time: June 14, 9:38 PM -03 (America/Argentina/Buenos_Aires)
Info:      Processes: 162 Uptime: 5:44 Memory: 592.3/5985.6MB
           Init: systemd v: 215 runlevel: 5 Gcc sys: 4.9.2 alt: 4.8
           Client: Shell (bash 4.3.301 running in terminator) inxi: 2.1.28
 
 14 Jun 17 @ 21:38:24 ~
   $ 

But this is a conky thread so ...
2017-06-14_214353_Scrot11.th.jpg


The sun will never set if you keep walking towards it. - my son
He has finished the chemo and rang the Gong!
Finished the radiation treatment and rang the Gong!
Now to finish the immunology treatments.

Online

#621 2017-06-15 23:31:00

ututo
Member
Registered: 2015-09-29
Posts: 277

Re: Show us your conky

Ok. This is a simple one.
I took BL-Text.conkyrc and adapted to my needs. You can use it on any wallpaper you want.

Here. Have some colors...
flames.th.png

helium.tar.gz

Extract the tar file in HOME/.config/conky/images/ and edit your conkyrc to select your prefered picture.

#####################  Settings  #####################
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager,sticky
own_window_colour 000000
own_window_class Conky
own_window_title Bunsen Labs Conky

minimum_size 160 120  ### w|h
#minimum_size 290 225  ### w|h

gap_x 0  
gap_y 0 

alignment mm
use_xft yes
xftfont Monospace:bold:size=9

xftalpha 1

override_utf8_locale yes

uppercase no

draw_shades no #yes
default_shade_color 000000
draw_outline no
default_outline_color 000000

default_color 7a7a7a 

draw_borders no #yes

stippled_borders 5

border_inner_margin 0

border_outer_margin 0

border_width 2
background yes

use_spacer none

no_buffers yes

imlib_cache_size 0

double_buffer yes

update_interval 1

TEXT
${image $HOME/.config/conky/images/helium00.png}

...and this is how it looks like:
Screenshot-06152017-081625PM.th.png

cheers


BunsenLabs on deviantArt
Don't touch my git!

Offline

#622 2017-06-16 00:25:17

Sector11
Conky 1.9er Mod Squid
From: Upstairs
Registered: 2015-08-20
Posts: 5,838

Re: Show us your conky

@ ututo - YOU ROCK!!!!!!  Thank you!  Awesome work.


The sun will never set if you keep walking towards it. - my son
He has finished the chemo and rang the Gong!
Finished the radiation treatment and rang the Gong!
Now to finish the immunology treatments.

Online

#623 2017-06-20 12:05:47

ragamatrix
Member
Registered: 2015-10-04
Posts: 423

Re: Show us your conky

ututo wrote:

Ok. This is a simple one.
I took BL-Text.conkyrc and adapted to my needs. You can use it on any wallpaper you want.

Here. Have some colors...
https://cdn.scrot.moe/images/2017/06/16/flames.th.png

helium.tar.gz

Extract the tar file in HOME/.config/conky/images/ and edit your conkyrc to select your prefered picture.

#####################  Settings  #####################
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager,sticky
own_window_colour 000000
own_window_class Conky
own_window_title Bunsen Labs Conky

minimum_size 160 120  ### w|h
#minimum_size 290 225  ### w|h

gap_x 0  
gap_y 0 

alignment mm
use_xft yes
xftfont Monospace:bold:size=9

xftalpha 1

override_utf8_locale yes

uppercase no

draw_shades no #yes
default_shade_color 000000
draw_outline no
default_outline_color 000000

default_color 7a7a7a 

draw_borders no #yes

stippled_borders 5

border_inner_margin 0

border_outer_margin 0

border_width 2
background yes

use_spacer none

no_buffers yes

imlib_cache_size 0

double_buffer yes

update_interval 1

TEXT
${image $HOME/.config/conky/images/helium00.png}

...and this is how it looks like:
https://cdn.scrot.moe/images/2017/06/16/Screenshot-06152017-081625PM.th.png

cheers

Wow really like this work Oo ! Thanks for that, do you have a bigger or a .xcf image of your logo ? I had the idea to make this logo "transparent" but visible wink With followin' this nice tuto What do you think, I've recognized a famous name in that wiki smile isn't it ?

Last edited by ragamatrix (2017-06-20 12:08:42)

Offline

#624 2017-06-20 12:42:49

damo
....moderator....
Registered: 2015-08-20
Posts: 5,547

Re: Show us your conky

ragamatrix wrote:

...Thanks for that, do you have a bigger or a .xcf image of your logo ? ...

Use gimp, or imagemagick...

convert "flames.png" -resize 1000 -quality 100 "flames-large.png"

The geometry value is the largest dimension, and will scale accordingly.


Be Excellent to Each Other...

FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Online

#625 2017-06-20 13:33:43

ragamatrix
Member
Registered: 2015-10-04
Posts: 423

Re: Show us your conky

Be Excellent to Each Other...
Thanks for that damo smile

Offline

Board footer

Powered by FluxBB