#1 2017-04-03 17:31:50

cyrf0006

Member

Registered: 2016-02-05

Posts: 47

[SOLVED] Deuterium Printer support - broken packages

After installation of Testing BL -- Deuterium -- I cannot install Printers Support.

$ sudo apt-get install bunsen-meta-printer-support

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 bunsen-meta-printer-support : Depends: cups but it is not going to be installed
                               Depends: printer-driver-cups-pdf but it is not going to be installed
                               Depends: printer-driver-hpijs but it is not going to be installed
                               Depends: hplip but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

Note that I already installed deuterium in non-UEFI mode and was able to Install Printer support. Is this a known problem?

Last edited by cyrf0006 (2017-04-04 14:37:09)

Head_on_a_Stick

Member

From: London

Registered: 2015-09-29

Posts: 9,093

Website

Re: [SOLVED] Deuterium Printer support - broken packages

Please post the output of:

apt-cache policy

---

Para todos todo, para nosotros nada

cyrf0006

Member

Registered: 2016-02-05

Posts: 47

Re: [SOLVED] Deuterium Printer support - broken packages

$ apt-cache policy
Package files:
 100 /var/lib/dpkg/status
     release a=now
 100 http://httpredir.debian.org/debian jessie-backports/non-free amd64 Packages
     release o=Debian Backports,a=jessie-backports,n=jessie-backports,l=Debian Backports,c=non-free,b=amd64
     origin httpredir.debian.org
 100 http://httpredir.debian.org/debian jessie-backports/contrib amd64 Packages
     release o=Debian Backports,a=jessie-backports,n=jessie-backports,l=Debian Backports,c=contrib,b=amd64
     origin httpredir.debian.org
 100 http://httpredir.debian.org/debian jessie-backports/main amd64 Packages
     release o=Debian Backports,a=jessie-backports,n=jessie-backports,l=Debian Backports,c=main,b=amd64
     origin httpredir.debian.org
 500 http://pkg.bunsenlabs.org/debian bunsen-hydrogen/main amd64 Packages
     release o=bunsenlabs,n=bunsen-hydrogen,l=bunsenlabs,c=main,b=amd64
     origin pkg.bunsenlabs.org
 100 http://pkg.bunsenlabs.org/debian jessie-backports/main amd64 Packages
     release o=bunsenlabs,n=jessie-backports,l=bunsenlabs,c=main,b=amd64
     origin pkg.bunsenlabs.org
 500 http://httpredir.debian.org/debian jessie-updates/non-free amd64 Packages
     release o=Debian,a=stable-updates,n=jessie-updates,l=Debian,c=non-free,b=amd64
     origin httpredir.debian.org
 500 http://httpredir.debian.org/debian jessie-updates/main amd64 Packages
     release o=Debian,a=stable-updates,n=jessie-updates,l=Debian,c=main,b=amd64
     origin httpredir.debian.org
 500 http://security.debian.org jessie/updates/contrib amd64 Packages
     release v=8,o=Debian,a=stable,n=jessie,l=Debian-Security,c=contrib,b=amd64
     origin security.debian.org
 500 http://security.debian.org jessie/updates/main amd64 Packages
     release v=8,o=Debian,a=stable,n=jessie,l=Debian-Security,c=main,b=amd64
     origin security.debian.org
 500 http://httpredir.debian.org/debian jessie/contrib amd64 Packages
     release v=8.7,o=Debian,a=stable,n=jessie,l=Debian,c=contrib,b=amd64
     origin httpredir.debian.org
 500 http://httpredir.debian.org/debian jessie/non-free amd64 Packages
     release v=8.7,o=Debian,a=stable,n=jessie,l=Debian,c=non-free,b=amd64
     origin httpredir.debian.org
 500 http://httpredir.debian.org/debian jessie/main amd64 Packages
     release v=8.7,o=Debian,a=stable,n=jessie,l=Debian,c=main,b=amd64
     origin httpredir.debian.org
Pinned packages:

Head_on_a_Stick

Member

From: London

Registered: 2015-09-29

Posts: 9,093

Website

Re: [SOLVED] Deuterium Printer support - broken packages

How about:

aptitude why-not cups

---

Para todos todo, para nosotros nada

cyrf0006

Member

Registered: 2016-02-05

Posts: 47

Re: [SOLVED] Deuterium Printer support - broken packages

$ aptitude why-not cups
Unable to find a reason to remove cups.

Head_on_a_Stick

Member

From: London

Registered: 2015-09-29

Posts: 9,093

Website

Re: [SOLVED] Deuterium Printer support - broken packages

Hmmm...

Can this do it:

aptitude install --simulate bunsen-meta-printer-support

If the `aptitude` commands has problems, it will give you a list of choices to resolve the problem and you need to press n to see the next option in the list.

Once all the options have been given, post the full output here please (and close the program with <Ctrl>+c).

EDIT: corrected package name.

Last edited by Head_on_a_Stick (2017-04-03 19:15:40)

---

Para todos todo, para nosotros nada

cyrf0006

Member

Registered: 2016-02-05

Posts: 47

Re: [SOLVED] Deuterium Printer support - broken packages

$ aptitude install --simulate bunsen-meta-printer-support
The following NEW packages will be installed:
  bc{a} bunsen-meta-printer-support colord{a} colord-data{a} cups{ab} cups-browsed{a} cups-client{ab} cups-common{a} cups-core-drivers{ab} cups-daemon{ab} cups-filters{a} cups-filters-core-drivers{a} cups-ppdc{a} cups-server-common{a} 
  hplip{a} hplip-data{a} libart-2.0-2{a} libcolorhug2{a} libcupscgi1{ab} libcupsmime1{ab} libcupsppdc1{ab} libfontembed1{a} libgusb2{a} libgutenprint2{a} libhpmud0{a} libieee1284-3{a} libperl5.20{ab} libqpdf13{a} libsane{a} 
  libsane-common{a} libsane-extras{a} libsane-extras-common{a} libsane-hpaio{a} libsnmp-base{a} libsnmp30{a} libwebpdemux1{a} libwebpmux1{a} poppler-utils{a} printer-driver-cups-pdf{a} printer-driver-gutenprint{a} 
  printer-driver-hpcups{a} printer-driver-hpijs{a} printer-driver-postscript-hp{a} python-imaging{a} python-pexpect{a} python-pil{a} python-renderpm{a} python-reportlab{a} python-reportlab-accel{a} qpdf{a} sane-utils{a} ssl-cert{a} 
0 packages upgraded, 52 newly installed, 0 to remove and 0 not upgraded.
Need to get 24.0 MB of archives. After unpacking 69.8 MB will be used.
The following packages have unmet dependencies:
 cups-core-drivers : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 cups-daemon : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 libcupsmime1 : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 cups-client : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 cups : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 libperl5.20 : Depends: perl-base (= 5.20.2-3+deb8u6) but 5.24.1-2 is installed.
 libcupscgi1 : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 libcupsppdc1 : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
The following actions will resolve these dependencies:

      Keep the following packages at their current version:
1)      bunsen-meta-printer-support [Not Installed]        
2)      cups [Not Installed]                               
3)      cups-client [Not Installed]                        
4)      cups-core-drivers [Not Installed]                  
5)      cups-daemon [Not Installed]                        
6)      cups-ppdc [Not Installed]                          
7)      hplip [Not Installed]                              
8)      libcupscgi1 [Not Installed]                        
9)      libcupsmime1 [Not Installed]                       
10)     libcupsppdc1 [Not Installed]                       
11)     libhpmud0 [Not Installed]                          
12)     libperl5.20 [Not Installed]                        
13)     libsane-hpaio [Not Installed]                      
14)     libsnmp30 [Not Installed]                          
15)     printer-driver-cups-pdf [Not Installed]            
16)     printer-driver-gutenprint [Not Installed]          
17)     printer-driver-hpcups [Not Installed]              
18)     printer-driver-hpijs [Not Installed]               
19)     printer-driver-postscript-hp [Not Installed]       

      Leave the following dependencies unresolved:         
20)     libsane-hpaio recommends hplip (= 3.14.6-1+deb8u1) 


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libio-socket-ssl-perl                                         
3)      libmailtools-perl                                             
4)      libnet-libidn-perl                                            
5)      libnet-smtp-ssl-perl                                          
6)      libnet-ssleay-perl                                            
7)      libperl5.24                                                   
8)      libyaml-libyaml-perl                                          
9)      perl-modules-5.24                                             

      Install the following packages:                                 
10)     libarchive-extract-perl [0.72-1 (stable)]                     
11)     libcgi-fast-perl [1:2.04-1 (stable)]                          
12)     libcgi-pm-perl [4.09-1 (stable)]                              
13)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
14)     liblog-message-perl [0.8-1 (stable)]                          
15)     liblog-message-simple-perl [0.10-2 (stable)]                  
16)     libmodule-pluggable-perl [5.1-1 (stable)]                     
17)     libpackage-constants-perl [0.04-1 (stable)]                   
18)     libpod-latex-perl [0.61-1 (stable)]                           
19)     libterm-ui-perl [0.42-1 (stable)]                             
20)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
21)     libyaml-syck-perl [1.27-2+b2 (stable)]                        
22)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
23)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
24)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
25)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
26)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
27)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
28)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
29)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]        
30)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
31)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]          
32)     libsocket6-perl [0.27-1+b1 (now) -> 0.25-1+b1 (stable)]       
33)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
34)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
35)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
36)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
37)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
38)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        
39)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]         

      Leave the following dependencies unresolved:                    
40)     perl-modules recommends libmodule-build-perl                  
41)     git-email recommends libemail-valid-perl                      
42)     git-email recommends libnet-smtp-ssl-perl                     
43)     git-email recommends libio-socket-ssl-perl (>= 1.951)         


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libio-socket-inet6-perl                                       
3)      libio-socket-ssl-perl                                         
4)      libmailtools-perl                                             
5)      libnet-dns-perl                                               
6)      libnet-libidn-perl                                            
7)      libnet-smtp-ssl-perl                                          
8)      libnet-ssleay-perl                                            
9)      libperl5.24                                                   
10)     libsocket6-perl                                               
11)     libyaml-libyaml-perl                                          
12)     perl-modules-5.24                                             

      Install the following packages:                                 
13)     libarchive-extract-perl [0.72-1 (stable)]                     
14)     libcgi-fast-perl [1:2.04-1 (stable)]                          
15)     libcgi-pm-perl [4.09-1 (stable)]                              
16)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
17)     liblog-message-perl [0.8-1 (stable)]                          
18)     liblog-message-simple-perl [0.10-2 (stable)]                  
19)     libmodule-pluggable-perl [5.1-1 (stable)]                     
20)     libpackage-constants-perl [0.04-1 (stable)]                   
21)     libpod-latex-perl [0.61-1 (stable)]                           
22)     libterm-ui-perl [0.42-1 (stable)]                             
23)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
24)     libyaml-syck-perl [1.27-2+b2 (stable)]                        
25)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
26)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
27)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
28)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
29)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
30)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
31)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
32)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]        
33)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
34)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]          
35)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
36)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
37)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
38)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
39)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
40)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        
41)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]         

      Leave the following dependencies unresolved:                    
42)     perl-modules recommends libmodule-build-perl                  
43)     git-email recommends libemail-valid-perl                      
44)     git-email recommends libnet-smtp-ssl-perl                     
45)     git-email recommends libio-socket-ssl-perl (>= 1.951)         


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libio-socket-inet6-perl                                       
3)      libio-socket-ssl-perl                                         
4)      libmailtools-perl                                             
5)      libnet-dns-perl                                               
6)      libnet-libidn-perl                                            
7)      libnet-smtp-ssl-perl                                          
8)      libnet-ssleay-perl                                            
9)      libperl5.24                                                   
10)     libsocket6-perl                                               
11)     perl-modules-5.24                                             

      Install the following packages:                                 
12)     libarchive-extract-perl [0.72-1 (stable)]                     
13)     libcgi-fast-perl [1:2.04-1 (stable)]                          
14)     libcgi-pm-perl [4.09-1 (stable)]                              
15)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
16)     liblog-message-perl [0.8-1 (stable)]                          
17)     liblog-message-simple-perl [0.10-2 (stable)]                  
18)     libmodule-pluggable-perl [5.1-1 (stable)]                     
19)     libpackage-constants-perl [0.04-1 (stable)]                   
20)     libpod-latex-perl [0.61-1 (stable)]                           
21)     libterm-ui-perl [0.42-1 (stable)]                             
22)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
23)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
24)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
25)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
26)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
27)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
28)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
29)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
30)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]        
31)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
32)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]          
33)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
34)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
35)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
36)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
37)     libyaml-libyaml-perl [0.63-2 (now) -> 0.41-6 (stable)]        
38)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
39)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        
40)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]         

      Leave the following dependencies unresolved:                    
41)     perl-modules recommends libmodule-build-perl                  
42)     git-email recommends libemail-valid-perl                      
43)     git-email recommends libnet-smtp-ssl-perl                     
44)     git-email recommends libio-socket-ssl-perl (>= 1.951)         


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                    
1)      libemail-valid-perl                                             
2)      libio-socket-inet6-perl                                         
3)      libio-socket-ssl-perl                                           
4)      libmailtools-perl                                               
5)      libnet-dns-perl                                                 
6)      libnet-libidn-perl                                              
7)      libnet-smtp-ssl-perl                                            
8)      libnet-ssleay-perl                                              
9)      libperl5.24                                                     
10)     libsocket6-perl                                                 
11)     libyaml-libyaml-perl                                            
12)     perl-modules-5.24                                               

      Install the following packages:                                   
13)     libarchive-extract-perl [0.72-1 (stable)]                       
14)     libcgi-fast-perl [1:2.04-1 (stable)]                            
15)     libcgi-pm-perl [4.09-1 (stable)]                                
16)     libfcgi-perl [0.77-1+deb8u1 (stable)]                           
17)     liblog-message-perl [0.8-1 (stable)]                            
18)     liblog-message-simple-perl [0.10-2 (stable)]                    
19)     libmodule-pluggable-perl [5.1-1 (stable)]                       
20)     libpackage-constants-perl [0.04-1 (stable)]                     
21)     libpod-latex-perl [0.61-1 (stable)]                             
22)     libterm-ui-perl [0.42-1 (stable)]                               
23)     libtext-soundex-perl [3.4-1+b2 (stable)]                        
24)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                    

      Downgrade the following packages:                                 
25)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]            
26)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]            
27)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]       
28)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]           
29)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]           
30)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]            
31)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]          
32)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]  
33)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]            
34)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]         
35)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]       
36)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]  
37)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]        
38)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]               
39)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]          
40)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]           

      Leave the following dependencies unresolved:                      
41)     perl-modules recommends libmodule-build-perl                    
42)     libyaml-perl recommends libyaml-libyaml-perl | libyaml-syck-perl
43)     git-email recommends libemail-valid-perl                        
44)     git-email recommends libnet-smtp-ssl-perl                       
45)     git-email recommends libio-socket-ssl-perl (>= 1.951)           


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libgtk2-perl                                                  
3)      libio-socket-inet6-perl                                       
4)      libio-socket-ssl-perl                                         
5)      libmailtools-perl                                             
6)      libnet-dns-perl                                               
7)      libnet-libidn-perl                                            
8)      libnet-smtp-ssl-perl                                          
9)      libnet-ssleay-perl                                            
10)     libpango-perl                                                 
11)     libperl5.24                                                   
12)     libsocket6-perl                                               
13)     libyaml-libyaml-perl                                          
14)     perl-modules-5.24                                             

      Install the following packages:                                 
15)     libarchive-extract-perl [0.72-1 (stable)]                     
16)     libcgi-fast-perl [1:2.04-1 (stable)]                          
17)     libcgi-pm-perl [4.09-1 (stable)]                              
18)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
19)     liblog-message-perl [0.8-1 (stable)]                          
20)     liblog-message-simple-perl [0.10-2 (stable)]                  
21)     libmodule-pluggable-perl [5.1-1 (stable)]                     
22)     libpackage-constants-perl [0.04-1 (stable)]                   
23)     libpod-latex-perl [0.61-1 (stable)]                           
24)     libterm-ui-perl [0.42-1 (stable)]                             
25)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
26)     libyaml-syck-perl [1.27-2+b2 (stable)]                        
27)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
28)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
29)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
30)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
31)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
32)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
33)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
34)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
35)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
36)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
37)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
38)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
39)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
40)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        
41)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]         

      Leave the following dependencies unresolved:                    
42)     gdebi recommends libgtk2-perl                                 
43)     perl-modules recommends libmodule-build-perl                  
44)     synaptic recommends libgtk2-perl (>= 1:1.130)                 
45)     git-email recommends libemail-valid-perl                      
46)     git-email recommends libnet-smtp-ssl-perl                     
47)     git-email recommends libio-socket-ssl-perl (>= 1.951)         


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libio-socket-inet6-perl                                       
3)      libio-socket-ssl-perl                                         
4)      libmailtools-perl                                             
5)      libnet-dns-perl                                               
6)      libnet-libidn-perl                                            
7)      libnet-smtp-ssl-perl                                          
8)      libnet-ssleay-perl                                            
9)      libperl5.24                                                   
10)     libsocket6-perl                                               
11)     libyaml-libyaml-perl                                          
12)     perl-doc                                                      
13)     perl-modules-5.24                                             

      Install the following packages:                                 
14)     libarchive-extract-perl [0.72-1 (stable)]                     
15)     libcgi-fast-perl [1:2.04-1 (stable)]                          
16)     libcgi-pm-perl [4.09-1 (stable)]                              
17)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
18)     liblog-message-perl [0.8-1 (stable)]                          
19)     liblog-message-simple-perl [0.10-2 (stable)]                  
20)     libmodule-pluggable-perl [5.1-1 (stable)]                     
21)     libpackage-constants-perl [0.04-1 (stable)]                   
22)     libpod-latex-perl [0.61-1 (stable)]                           
23)     libterm-ui-perl [0.42-1 (stable)]                             
24)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
25)     libyaml-syck-perl [1.27-2+b2 (stable)]                        
26)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
27)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
28)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
29)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
30)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
31)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
32)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
33)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]        
34)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
35)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]          
36)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
37)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
38)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
39)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
40)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
41)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        

      Leave the following dependencies unresolved:                    
42)     perl-modules recommends libmodule-build-perl                  
43)     git-email recommends libemail-valid-perl                      
44)     git-email recommends libnet-smtp-ssl-perl                     
45)     git-email recommends libio-socket-ssl-perl (>= 1.951)         
46)     emacs-goodies-el recommends perl-doc                          


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libio-socket-inet6-perl                                       
3)      libio-socket-ssl-perl                                         
4)      libmailtools-perl                                             
5)      libnet-dns-perl                                               
6)      libnet-libidn-perl                                            
7)      libnet-smtp-ssl-perl                                          
8)      libnet-ssleay-perl                                            
9)      libperl5.24                                                   
10)     libsocket6-perl                                               
11)     perl-doc                                                      
12)     perl-modules-5.24                                             

      Install the following packages:                                 
13)     libarchive-extract-perl [0.72-1 (stable)]                     
14)     libcgi-fast-perl [1:2.04-1 (stable)]                          
15)     libcgi-pm-perl [4.09-1 (stable)]                              
16)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
17)     liblog-message-perl [0.8-1 (stable)]                          
18)     liblog-message-simple-perl [0.10-2 (stable)]                  
19)     libmodule-pluggable-perl [5.1-1 (stable)]                     
20)     libpackage-constants-perl [0.04-1 (stable)]                   
21)     libpod-latex-perl [0.61-1 (stable)]                           
22)     libterm-ui-perl [0.42-1 (stable)]                             
23)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
24)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
25)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
26)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
27)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
28)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
29)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
30)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
31)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]        
32)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
33)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]          
34)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
35)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
36)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
37)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
38)     libyaml-libyaml-perl [0.63-2 (now) -> 0.41-6 (stable)]        
39)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
40)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        

      Leave the following dependencies unresolved:                    
41)     perl-modules recommends libmodule-build-perl                  
42)     git-email recommends libemail-valid-perl                      
43)     git-email recommends libnet-smtp-ssl-perl                     
44)     git-email recommends libio-socket-ssl-perl (>= 1.951)         
45)     emacs-goodies-el recommends perl-doc                          


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libio-socket-ssl-perl                                         
3)      libmailtools-perl                                             
4)      libnet-libidn-perl                                            
5)      libnet-smtp-ssl-perl                                          
6)      libnet-ssleay-perl                                            
7)      libperl5.24                                                   
8)      perl-modules-5.24                                             

      Install the following packages:                                 
9)      libarchive-extract-perl [0.72-1 (stable)]                     
10)     libcgi-fast-perl [1:2.04-1 (stable)]                          
11)     libcgi-pm-perl [4.09-1 (stable)]                              
12)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
13)     liblog-message-perl [0.8-1 (stable)]                          
14)     liblog-message-simple-perl [0.10-2 (stable)]                  
15)     libmodule-pluggable-perl [5.1-1 (stable)]                     
16)     libpackage-constants-perl [0.04-1 (stable)]                   
17)     libpod-latex-perl [0.61-1 (stable)]                           
18)     libterm-ui-perl [0.42-1 (stable)]                             
19)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
20)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
21)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
22)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
23)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
24)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
25)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
26)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
27)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]        
28)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
29)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]          
30)     libsocket6-perl [0.27-1+b1 (now) -> 0.25-1+b1 (stable)]       
31)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
32)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
33)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
34)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
35)     libyaml-libyaml-perl [0.63-2 (now) -> 0.41-6 (stable)]        
36)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
37)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        
38)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]         

      Leave the following dependencies unresolved:                    
39)     perl-modules recommends libmodule-build-perl                  
40)     git-email recommends libemail-valid-perl                      
41)     git-email recommends libnet-smtp-ssl-perl                     
42)     git-email recommends libio-socket-ssl-perl (>= 1.951)         


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libgtk2-perl                                                  
3)      libio-socket-inet6-perl                                       
4)      libio-socket-ssl-perl                                         
5)      libmailtools-perl                                             
6)      libnet-dns-perl                                               
7)      libnet-libidn-perl                                            
8)      libnet-smtp-ssl-perl                                          
9)      libnet-ssleay-perl                                            
10)     libpango-perl                                                 
11)     libperl5.24                                                   
12)     libsocket6-perl                                               
13)     perl-modules-5.24                                             

      Install the following packages:                                 
14)     libarchive-extract-perl [0.72-1 (stable)]                     
15)     libcgi-fast-perl [1:2.04-1 (stable)]                          
16)     libcgi-pm-perl [4.09-1 (stable)]                              
17)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
18)     liblog-message-perl [0.8-1 (stable)]                          
19)     liblog-message-simple-perl [0.10-2 (stable)]                  
20)     libmodule-pluggable-perl [5.1-1 (stable)]                     
21)     libpackage-constants-perl [0.04-1 (stable)]                   
22)     libpod-latex-perl [0.61-1 (stable)]                           
23)     libterm-ui-perl [0.42-1 (stable)]                             
24)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
25)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
26)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
27)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
28)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
29)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
30)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
31)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
32)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
33)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
34)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
35)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
36)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
37)     libyaml-libyaml-perl [0.63-2 (now) -> 0.41-6 (stable)]        
38)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
39)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        
40)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]         

      Leave the following dependencies unresolved:                    
41)     gdebi recommends libgtk2-perl                                 
42)     perl-modules recommends libmodule-build-perl                  
43)     synaptic recommends libgtk2-perl (>= 1:1.130)                 
44)     git-email recommends libemail-valid-perl                      
45)     git-email recommends libnet-smtp-ssl-perl                     
46)     git-email recommends libio-socket-ssl-perl (>= 1.951)         


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                    
1)      libemail-valid-perl                                             
2)      libio-socket-inet6-perl                                         
3)      libio-socket-ssl-perl                                           
4)      libmailtools-perl                                               
5)      libnet-dns-perl                                                 
6)      libnet-libidn-perl                                              
7)      libnet-smtp-ssl-perl                                            
8)      libnet-ssleay-perl                                              
9)      libperl5.24                                                     
10)     libsocket6-perl                                                 
11)     libyaml-libyaml-perl                                            
12)     perl-doc                                                        
13)     perl-modules-5.24                                               

      Install the following packages:                                   
14)     libarchive-extract-perl [0.72-1 (stable)]                       
15)     libcgi-fast-perl [1:2.04-1 (stable)]                            
16)     libcgi-pm-perl [4.09-1 (stable)]                                
17)     libfcgi-perl [0.77-1+deb8u1 (stable)]                           
18)     liblog-message-perl [0.8-1 (stable)]                            
19)     liblog-message-simple-perl [0.10-2 (stable)]                    
20)     libmodule-pluggable-perl [5.1-1 (stable)]                       
21)     libpackage-constants-perl [0.04-1 (stable)]                     
22)     libpod-latex-perl [0.61-1 (stable)]                             
23)     libterm-ui-perl [0.42-1 (stable)]                               
24)     libtext-soundex-perl [3.4-1+b2 (stable)]                        
25)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                    

      Downgrade the following packages:                                 
26)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]            
27)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]            
28)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]       
29)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]           
30)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]           
31)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]            
32)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]          
33)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]  
34)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]            
35)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]         
36)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]       
37)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]  
38)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]        
39)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]               
40)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]          

      Leave the following dependencies unresolved:                      
41)     perl-modules recommends libmodule-build-perl                    
42)     libyaml-perl recommends libyaml-libyaml-perl | libyaml-syck-perl
43)     git-email recommends libemail-valid-perl                        
44)     git-email recommends libnet-smtp-ssl-perl                       
45)     git-email recommends libio-socket-ssl-perl (>= 1.951)           
46)     emacs-goodies-el recommends perl-doc                            


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libgtk2-perl                                                  
3)      libio-socket-inet6-perl                                       
4)      libio-socket-ssl-perl                                         
5)      libmailtools-perl                                             
6)      libnet-dns-perl                                               
7)      libnet-libidn-perl                                            
8)      libnet-smtp-ssl-perl                                          
9)      libnet-ssleay-perl                                            
10)     libperl5.24                                                   
11)     libsocket6-perl                                               
12)     libyaml-libyaml-perl                                          
13)     perl-modules-5.24                                             

      Install the following packages:                                 
14)     libarchive-extract-perl [0.72-1 (stable)]                     
15)     libcgi-fast-perl [1:2.04-1 (stable)]                          
16)     libcgi-pm-perl [4.09-1 (stable)]                              
17)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
18)     liblog-message-perl [0.8-1 (stable)]                          
19)     liblog-message-simple-perl [0.10-2 (stable)]                  
20)     libmodule-pluggable-perl [5.1-1 (stable)]                     
21)     libpackage-constants-perl [0.04-1 (stable)]                   
22)     libpod-latex-perl [0.61-1 (stable)]                           
23)     libterm-ui-perl [0.42-1 (stable)]                             
24)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
25)     libyaml-syck-perl [1.27-2+b2 (stable)]                        
26)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
27)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
28)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
29)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
30)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
31)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
32)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
33)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
34)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]          
35)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
36)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
37)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
38)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
39)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
40)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        
41)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]         

      Leave the following dependencies unresolved:                    
42)     gdebi recommends libgtk2-perl                                 
43)     perl-modules recommends libmodule-build-perl                  
44)     synaptic recommends libgtk2-perl (>= 1:1.130)                 
45)     git-email recommends libemail-valid-perl                      
46)     git-email recommends libnet-smtp-ssl-perl                     
47)     git-email recommends libio-socket-ssl-perl (>= 1.951)         


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libgtk2-perl                                                  
3)      libio-socket-inet6-perl                                       
4)      libio-socket-ssl-perl                                         
5)      libmailtools-perl                                             
6)      libnet-dns-perl                                               
7)      libnet-libidn-perl                                            
8)      libnet-smtp-ssl-perl                                          
9)      libnet-ssleay-perl                                            
10)     libperl5.24                                                   
11)     libsocket6-perl                                               
12)     perl-modules-5.24                                             

      Install the following packages:                                 
13)     libarchive-extract-perl [0.72-1 (stable)]                     
14)     libcgi-fast-perl [1:2.04-1 (stable)]                          
15)     libcgi-pm-perl [4.09-1 (stable)]                              
16)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
17)     liblog-message-perl [0.8-1 (stable)]                          
18)     liblog-message-simple-perl [0.10-2 (stable)]                  
19)     libmodule-pluggable-perl [5.1-1 (stable)]                     
20)     libpackage-constants-perl [0.04-1 (stable)]                   
21)     libpod-latex-perl [0.61-1 (stable)]                           
22)     libterm-ui-perl [0.42-1 (stable)]                             
23)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
24)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
25)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
26)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
27)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
28)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
29)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
30)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
31)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
32)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]          
33)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
34)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
35)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
36)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
37)     libyaml-libyaml-perl [0.63-2 (now) -> 0.41-6 (stable)]        
38)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
39)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        
40)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]         

      Leave the following dependencies unresolved:                    
41)     gdebi recommends libgtk2-perl                                 
42)     perl-modules recommends libmodule-build-perl                  
43)     synaptic recommends libgtk2-perl (>= 1:1.130)                 
44)     git-email recommends libemail-valid-perl                      
45)     git-email recommends libnet-smtp-ssl-perl                     
46)     git-email recommends libio-socket-ssl-perl (>= 1.951)         


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libio-socket-ssl-perl                                         
3)      libmailtools-perl                                             
4)      libnet-libidn-perl                                            
5)      libnet-smtp-ssl-perl                                          
6)      libnet-ssleay-perl                                            
7)      libperl5.24                                                   
8)      libyaml-libyaml-perl                                          
9)      perl-doc                                                      
10)     perl-modules-5.24                                             

      Install the following packages:                                 
11)     libarchive-extract-perl [0.72-1 (stable)]                     
12)     libcgi-fast-perl [1:2.04-1 (stable)]                          
13)     libcgi-pm-perl [4.09-1 (stable)]                              
14)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
15)     liblog-message-perl [0.8-1 (stable)]                          
16)     liblog-message-simple-perl [0.10-2 (stable)]                  
17)     libmodule-pluggable-perl [5.1-1 (stable)]                     
18)     libpackage-constants-perl [0.04-1 (stable)]                   
19)     libpod-latex-perl [0.61-1 (stable)]                           
20)     libterm-ui-perl [0.42-1 (stable)]                             
21)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
22)     libyaml-syck-perl [1.27-2+b2 (stable)]                        
23)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
24)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
25)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
26)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
27)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
28)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
29)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
30)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]        
31)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
32)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]          
33)     libsocket6-perl [0.27-1+b1 (now) -> 0.25-1+b1 (stable)]       
34)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
35)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
36)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
37)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
38)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
39)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        

      Leave the following dependencies unresolved:                    
40)     perl-modules recommends libmodule-build-perl                  
41)     git-email recommends libemail-valid-perl                      
42)     git-email recommends libnet-smtp-ssl-perl                     
43)     git-email recommends libio-socket-ssl-perl (>= 1.951)         
44)     emacs-goodies-el recommends perl-doc                          


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                  
1)      libemail-valid-perl                                           
2)      libgtk2-perl                                                  
3)      libio-socket-inet6-perl                                       
4)      libio-socket-ssl-perl                                         
5)      libmailtools-perl                                             
6)      libnet-dns-perl                                               
7)      libnet-libidn-perl                                            
8)      libnet-smtp-ssl-perl                                          
9)      libnet-ssleay-perl                                            
10)     libpango-perl                                                 
11)     libperl5.24                                                   
12)     libsocket6-perl                                               
13)     libyaml-libyaml-perl                                          
14)     perl-doc                                                      
15)     perl-modules-5.24                                             

      Install the following packages:                                 
16)     libarchive-extract-perl [0.72-1 (stable)]                     
17)     libcgi-fast-perl [1:2.04-1 (stable)]                          
18)     libcgi-pm-perl [4.09-1 (stable)]                              
19)     libfcgi-perl [0.77-1+deb8u1 (stable)]                         
20)     liblog-message-perl [0.8-1 (stable)]                          
21)     liblog-message-simple-perl [0.10-2 (stable)]                  
22)     libmodule-pluggable-perl [5.1-1 (stable)]                     
23)     libpackage-constants-perl [0.04-1 (stable)]                   
24)     libpod-latex-perl [0.61-1 (stable)]                           
25)     libterm-ui-perl [0.42-1 (stable)]                             
26)     libtext-soundex-perl [3.4-1+b2 (stable)]                      
27)     libyaml-syck-perl [1.27-2+b2 (stable)]                        
28)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                  

      Downgrade the following packages:                               
29)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]          
30)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]          
31)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]     
32)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]         
33)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]         
34)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]          
35)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]
36)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]       
37)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]     
38)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]
39)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]      
40)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]             
41)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]        

      Leave the following dependencies unresolved:                    
42)     gdebi recommends libgtk2-perl                                 
43)     perl-modules recommends libmodule-build-perl                  
44)     synaptic recommends libgtk2-perl (>= 1:1.130)                 
45)     git-email recommends libemail-valid-perl                      
46)     git-email recommends libnet-smtp-ssl-perl                     
47)     git-email recommends libio-socket-ssl-perl (>= 1.951)         
48)     emacs-goodies-el recommends perl-doc                          


Accept this solution? [Y/n/q/?] n
The following actions will resolve these dependencies:

      Remove the following packages:                                    
1)      libemail-valid-perl                                             
2)      libio-socket-ssl-perl                                           
3)      libmailtools-perl                                               
4)      libnet-libidn-perl                                              
5)      libnet-smtp-ssl-perl                                            
6)      libnet-ssleay-perl                                              
7)      libperl5.24                                                     
8)      libyaml-libyaml-perl                                            
9)      perl-modules-5.24                                               

      Install the following packages:                                   
10)     libarchive-extract-perl [0.72-1 (stable)]                       
11)     libcgi-fast-perl [1:2.04-1 (stable)]                            
12)     libcgi-pm-perl [4.09-1 (stable)]                                
13)     libfcgi-perl [0.77-1+deb8u1 (stable)]                           
14)     liblog-message-perl [0.8-1 (stable)]                            
15)     liblog-message-simple-perl [0.10-2 (stable)]                    
16)     libmodule-pluggable-perl [5.1-1 (stable)]                       
17)     libpackage-constants-perl [0.04-1 (stable)]                     
18)     libpod-latex-perl [0.61-1 (stable)]                             
19)     libterm-ui-perl [0.42-1 (stable)]                               
20)     libtext-soundex-perl [3.4-1+b2 (stable)]                        
21)     perl-modules [5.20.2-3+deb8u6 (now, stable)]                    

      Downgrade the following packages:                                 
22)     libcairo-perl [1.106-1+b2 (now) -> 1.104-2 (stable)]            
23)     libcups2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]            
24)     libcupsimage2 [2.2.1-8 (now) -> 1.7.5-11+deb8u1 (stable)]       
25)     libdbd-sqlite3-perl [1.54-1 (now) -> 1.44-1 (stable)]           
26)     libdbi-perl [1.636-1+b1 (now) -> 1.631-3+b1 (stable)]           
27)     libglib-perl [3:1.324-1 (now) -> 3:1.305-2 (stable)]            
28)     libgtk2-perl [2:1.2499-1 (now) -> 2:1.2492-4 (stable)]          
29)     liblocale-gettext-perl [1.07-3+b1 (now) -> 1.05-8+b1 (stable)]  
30)     libpango-perl [1.227-1+b1 (now) -> 1.226-2 (stable)]            
31)     libsocket6-perl [0.27-1+b1 (now) -> 0.25-1+b1 (stable)]         
32)     libsvn-perl [1.9.5-1 (now) -> 1.8.10-6+deb8u4 (stable)]         
33)     libterm-readkey-perl [2.37-1 (now) -> 2.32-1+b1 (stable)]       
34)     libtext-charwidth-perl [0.04-7+b5 (now) -> 0.04-7+b3 (stable)]  
35)     libtext-iconv-perl [1.7-5+b4 (now) -> 1.7-5+b2 (stable)]        
36)     perl [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]               
37)     perl-base [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]          
38)     perl-doc [5.24.1-2 (now) -> 5.20.2-3+deb8u6 (stable)]           

      Leave the following dependencies unresolved:                      
39)     perl-modules recommends libmodule-build-perl                    
40)     libyaml-perl recommends libyaml-libyaml-perl | libyaml-syck-perl
41)     git-email recommends libemail-valid-perl                        
42)     git-email recommends libnet-smtp-ssl-perl                       
43)     git-email recommends libio-socket-ssl-perl (>= 1.951)           


Accept this solution? [Y/n/q/?] 

[...] and so on ...

Head_on_a_Stick

Member

From: London

Registered: 2015-09-29

Posts: 9,093

Website

Re: [SOLVED] Deuterium Printer support - broken packages

Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.

There's the culprit.

The second option presented by `aptitude` will fix your problem but it will also remove some programs.

Let's get to the root of this:

apt-cache policy libcups2

[...] and so on ...

Yes, sorry about that, clearly the "--simulate" option doesn't terminate 

---

Para todos todo, para nosotros nada

cyrf0006

Member

Registered: 2016-02-05

Posts: 47

Re: [SOLVED] Deuterium Printer support - broken packages

Yes, sorry about that, clearly the "--simulate" option doesn't terminate

No worries, seems quite powerful!

$ apt-cache policy libcups2
libcups2:
  Installed: 2.2.1-8
  Candidate: 2.2.1-8
  Version table:
 *** 2.2.1-8 100
        100 /var/lib/dpkg/status
     2.2.1-8~bpo8+1 100
        100 http://httpredir.debian.org/debian jessie-backports/main amd64 Packages
     1.7.5-11+deb8u1 500
        500 http://httpredir.debian.org/debian jessie/main amd64 Packages
        500 http://security.debian.org jessie/updates/main amd64 Packages

It is likely that I generated the problem while fixing not working WiFi with backports...

Last edited by cyrf0006 (2017-04-03 20:18:48)

Head_on_a_Stick

Member

From: London

Registered: 2015-09-29

Posts: 9,093

Website

Re: [SOLVED] Deuterium Printer support - broken packages

1)      libemail-valid-perl                                           
2)      libio-socket-ssl-perl                                         
3)      libmailtools-perl                                             
4)      libnet-libidn-perl                                            
5)      libnet-smtp-ssl-perl                                          
6)      libnet-ssleay-perl                                            
7)      libperl5.24                                                   
8)      libyaml-libyaml-perl                                          
9)      perl-modules-5.24

From where did you install these packages?

I think they're all available from the Debian jessie repositories (which you have on your system) so you could try:

aptitude install --simulate bunsen-meta-printer-support libemail-valid-perl libio-socket-ssl-perl libmailtools-perl libnet-libidn-perl libnet-smtp-ssl-perl libperl5.24 libyaml-libyaml-perl perl-modules-5.24

If the output looks sane, run the command again with `sudo` and without "--simulate".

It is likely that I generated the problem while fixing not working WiFi with backports...

Please list the exact steps taken, include all commands used.

---

Para todos todo, para nosotros nada

cyrf0006

Member

Registered: 2016-02-05

Posts: 47

Re: [SOLVED] Deuterium Printer support - broken packages

Actually it was not using the backports, but Debian Testing (maybe even more likely to generate the problem!). I used this solution that worked fine when I first installed in non-UEFI mode.

I removed the repo from my source.list since.

Also:

$ aptitude install --simulate bunsen-meta-printer-support libemail-valid-perl libio-socket-ssl-perl libmailtools-perl libnet-libidn-perl libnet-smtp-ssl-perl libperl5.24 libyaml-libyaml-perl perl-modules-5.24
The following NEW packages will be installed:
  bc{a} bunsen-meta-printer-support colord{a} colord-data{a} cups{ab} cups-browsed{a} cups-client{ab} cups-common{a} cups-core-drivers{ab} cups-daemon{ab} cups-filters{a} cups-filters-core-drivers{a} cups-ppdc{a} cups-server-common{a} 
  hplip{a} hplip-data{a} libart-2.0-2{a} libcolorhug2{a} libcupscgi1{ab} libcupsmime1{ab} libcupsppdc1{ab} libfontembed1{a} libgusb2{a} libgutenprint2{a} libhpmud0{a} libieee1284-3{a} libperl5.20{ab} libqpdf13{a} libsane{a} 
  libsane-common{a} libsane-extras{a} libsane-extras-common{a} libsane-hpaio{a} libsnmp-base{a} libsnmp30{a} libwebpdemux1{a} libwebpmux1{a} poppler-utils{a} printer-driver-cups-pdf{a} printer-driver-gutenprint{a} 
  printer-driver-hpcups{a} printer-driver-hpijs{a} printer-driver-postscript-hp{a} python-imaging{a} python-pexpect{a} python-pil{a} python-renderpm{a} python-reportlab{a} python-reportlab-accel{a} qpdf{a} sane-utils{a} ssl-cert{a} 
0 packages upgraded, 52 newly installed, 0 to remove and 0 not upgraded.
Need to get 24.0 MB of archives. After unpacking 69.8 MB will be used.
The following packages have unmet dependencies:
 cups-core-drivers : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 cups-daemon : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 libcupsmime1 : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 cups-client : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 cups : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 libperl5.20 : Depends: perl-base (= 5.20.2-3+deb8u6) but 5.24.1-2 is installed.
 libcupscgi1 : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
 libcupsppdc1 : Depends: libcups2 (= 1.7.5-11+deb8u1) but 2.2.1-8 is installed.
The following actions will resolve these dependencies:

      Keep the following packages at their current version:
1)      bunsen-meta-printer-support [Not Installed]        
2)      cups [Not Installed]                               
3)      cups-client [Not Installed]                        
4)      cups-core-drivers [Not Installed]                  
5)      cups-daemon [Not Installed]                        
6)      cups-ppdc [Not Installed]                          
7)      hplip [Not Installed]                              
8)      libcupscgi1 [Not Installed]                        
9)      libcupsmime1 [Not Installed]                       
10)     libcupsppdc1 [Not Installed]                       
11)     libhpmud0 [Not Installed]                          
12)     libperl5.20 [Not Installed]                        
13)     libsane-hpaio [Not Installed]                      
14)     libsnmp30 [Not Installed]                          
15)     printer-driver-cups-pdf [Not Installed]            
16)     printer-driver-gutenprint [Not Installed]          
17)     printer-driver-hpcups [Not Installed]              
18)     printer-driver-hpijs [Not Installed]               
19)     printer-driver-postscript-hp [Not Installed]       

      Leave the following dependencies unresolved:         
20)     libsane-hpaio recommends hplip (= 3.14.6-1+deb8u1) 


Accept this solution? [Y/n/q/?] 

Head_on_a_Stick

Member

From: London

Registered: 2015-09-29

Posts: 9,093

Website

Re: [SOLVED] Deuterium Printer support - broken packages

Actually it was not using the backports, but Debian Testing (maybe even more likely to generate the problem!)

Using Debian testing/unstable repositories breaks BunsenLabs

Please read https://wiki.debian.org/DontBreakDebian … nkenDebian

I think that it would be best to re-install your system from scratch.

EDIT: the firmware you need for your wireless card is available from the jessie-backports repositories (which you already had):

sudo apt-get install -t jessie-backports firmware-iwlwifi

https://packages.debian.org/jessie-back … re-iwlwifi

You will also need the backported kernel to match:

https://forums.bunsenlabs.org/viewtopic.php?id=1257

Last edited by Head_on_a_Stick (2017-04-03 20:49:18)

---

Para todos todo, para nosotros nada

cyrf0006

Member

Registered: 2016-02-05

Posts: 47

Re: [SOLVED] Deuterium Printer support - broken packages

Using Debian testing/unstable repositories breaks BunsenLabs

Glup...
:cry:

cyrf0006

Member

Registered: 2016-02-05

Posts: 47

Re: [SOLVED] Deuterium Printer support - broken packages

Re-installed and all works fine.
Many thanks.