You are not logged in.

  1. Index
  2. » Scripts, Tutorials & Tips
  3. » Show us your conky

Pages: 1 … 8 9 10 11 12 … 120

#181 2016-07-05 00:27:50

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,008

Re: Show us your conky

COOL!  Will take a look tomorrow.

Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#182 2016-07-06 14:05:28

ragamatrix
Member
Registered: 2015-10-04
Posts: 427

Re: Show us your conky

damo wrote:
Sector11 wrote:

No I didn't combine them, I edited their positions in the script itself:

That's what I meant :8

Script edited to allow either separate or concentric dials, with date/time/location text outside. I've put that text formatting in a separate function:
https://cdn.scrot.moe/images/2016/07/04 … _scrot.png

Edit the section just after "update_num=tonumber(updates)", and adjust x,y according to where you want the text:

--[[ 
lua-weather.lua, written by <damo>, July 2016

---------------------------------------------
Use this in a conky with

    lua_load /path/to/lua-weather.lua
    lua_draw_hook_pre conky_main

In the conky, get the weather data from lua-weather.sh with

TEXT
${execi <interval> /path/to/lua-weather.sh}

---------------------------------------------]]

require 'cairo'

-- set default font
--fontface="Dustismo"
fontface="Liberation"

function conky_main()
    if conky_window==nil then return end
    cs=cairo_xlib_surface_create(conky_window.display,
                                        conky_window.drawable,
                                        conky_window.visual,
                                        conky_window.width,
                                        conky_window.height)
    cr=cairo_create(cs)
    
    xW=160      -- x pos wind dial centre
    yW=90       -- y pos wind dial centre
    radiusW=60  -- radiusW wind dial
    xT=30       -- x pos temp bar (top)
    yT=10       -- y pos temp bar (top)
    wT=6        -- width temp bar
    hT=150      -- height temp bar
    xSun=340    -- x pos sun dial centre
    ySun=90     -- y pos sun dial centre
    radiusSun=60-- radius sun dial
    datafile="/home/damo/tmp/weather.txt"  -- textfile to hold lua-weather.sh output
    
    direction,windS,temperature,sunrise,sunset,loc,wx = get_vals() 
    
    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)

-- Edit this for concentric dials ---------------------------------

    concentric = 0  --<-- Change to "1" to display concentric rings

    if ( concentric == 1 ) then
        xSun = 300
        ySun = 100
        radiusSun = 90
        xW = xSun
        yW = ySun
        radiusW = 0.7*radiusSun
    end
------------------------------------------------------------------------

    if update_num>1 then
        draw_widgets()
    end

    cairo_destroy(cr)
    cairo_surface_destroy(cs)
    cr=nil
end

--  Choose the widgets to be displayed:
function draw_widgets()
    draw_thermometer(cr,xT,yT,wT,hT)
    draw_wind_rose()
    draw_sun_ring()
end

-- read values from datafile
function get_vals()
    local path = datafile
    local file = io.open( path)
    local array = {}
    local i=0
    
    if (file) then
        -- read all contents of file into array
        for line in file:lines() do
            i=i+1
            array[i]=line
        end
        file:close()

        dir=tostring(array[1]) -- get wind direction, convert to value required
        winddir=-math.pi*(tonumber(dir))/180
        wind_speed=tostring(array[2])  -- windspeed knots
        temperature=tonumber(array[5])
        sunrise=array[3]
        sunset=array[4]
        location=array[6]
        weather=array[7]

        return winddir,wind_speed,temperature,sunrise,sunset,location,weather
    else
        print("datafile " .. datafile .. " not found")
    end
end

-- convert degree to rad 
function angle_to_position(start_angle, current_angle)
    local pos = start_angle + current_angle
    return pos * math.pi/180
end

function draw_sun_ring()
--    local hours=20
--    local mins=0
    
    local hours=os.date("%H")
    local mins=os.date("%M")
    current_time=(hours .. mins)

    mins_arc = 360/60*mins
    hours_arc = (360/24*hours + mins_arc/24) + 90
    
    start_angle = 90    -- south
    end_angle = 360
    start_arc = 0
    stop_arc = 0

    -- get times and angle position from function sun_rise_set()
    sunrise,sunset,sun_rise,sun_set = sun_rise_set()

    local border_pat=cairo_pattern_create_linear(xSun,ySun-radiusSun*1.25,xSun,ySun+radiusSun*1.25)
    
    cairo_pattern_add_color_stop_rgba(border_pat,0,1,1,0,0.3)
    cairo_pattern_add_color_stop_rgba(border_pat,0.4,0.9,0.9,0.2,0.2)
    cairo_pattern_add_color_stop_rgba(border_pat,0.55,0.9,0.2,0,0.2)
    cairo_pattern_add_color_stop_rgba(border_pat,0.7,0,0.1,1,0.3)
    cairo_set_source(cr,border_pat)
    -- draw ring, starting at south position ( = midnight/00hrs)
    cairo_arc(cr, xSun, ySun, radiusSun, angle_to_position(start_angle, 0), angle_to_position(start_angle, end_angle))
--  set width of ring
    cairo_set_line_width(cr,radiusSun*0.06)
    cairo_stroke(cr)
    cairo_pattern_destroy (pat)

    -- draw sun
    -- get position on circumference ( = time from midnight (south), 24hr clock)
    sun_pos=angle_to_position(start_angle,hours_arc)
    local sunx=xSun - (math.sin(-sun_pos)*radiusSun)
    local suny=ySun - (math.cos(-sun_pos)*radiusSun)
    -- set colour & alpha, for day/night
    if ( tonumber(current_time) > tonumber(sunrise) ) and ( tonumber(current_time) < tonumber(sunset) ) then
        r,g,b,a = 1,1,0,0.4 --day
    else
        r,g,b,a = 0.5,0.5,0.5,0.4 --night
    end
    cairo_set_source_rgba (cr,r,g,b,a)
    cairo_arc(cr,sunx,suny,radiusSun*0.09,0,360)
    cairo_fill(cr)
    
    local r,g,b,a = 1,1,0,0.5
    cairo_set_source_rgba (cr,r,g,b,a)
    cairo_set_line_width(cr,2)
    cairo_set_line_cap(cr, CAIRO_LINE_CAP_ROUND)

    -- draw sunrise mark
    local sunrise_x=xSun - (math.sin(-sun_rise)*radiusSun*1.05)
    local sunrise_y=ySun - (math.cos(-sun_rise)*radiusSun*1.05)
    local sunrise_xc=xSun - (math.sin(-sun_rise)*radiusSun*0.95)
    local sunrise_yc=ySun - (math.cos(-sun_rise)*radiusSun*0.95)
    cairo_move_to(cr,sunrise_x,sunrise_y)
    cairo_line_to(cr,sunrise_xc,sunrise_yc)
    cairo_stroke(cr)
    -- draw sunset mark
    local sunset_x=xSun - (math.sin(-sun_set)*radiusSun*1.05)
    local sunset_y=ySun - (math.cos(-sun_set)*radiusSun*1.05)
    local sunset_xc=xSun - (math.sin(-sun_set)*radiusSun*0.95)
    local sunset_yc=ySun - (math.cos(-sun_set)*radiusSun*0.95)
    local r,g,b,a = 1,0,0,0.5
    cairo_set_source_rgba (cr,r,g,b,a)
    cairo_move_to(cr,sunset_x,sunset_y)
    cairo_line_to(cr,sunset_xc,sunset_yc)
    cairo_stroke(cr)
--  print sunrise/sunset text
    sun_text(sunrise_x,sunrise_y,sunset_x,sunset_y)
end

function sun_text(xr,yr,xs,ys)
    -- display sunrise time
    local r,g,b,a = 1,1,0,0.5
    cairo_set_source_rgba (cr,r,g,b,a)
    print_text(cr,sunrise,xr-4,yr,4,10)
    print_text(cr,"sunrise",xr-4,yr+8,4,8)
    
    -- display sunset time
    local r,g,b,a = 1,0,0,0.5
    cairo_set_source_rgba (cr,r,g,b,a)
    print_text(cr,sunset,xs,ys+10,0,10)
    print_text(cr,"sunset",xs,ys+18,0,8)
    
--    print("concentric= " .. concentric)
    if ( concentric == 0 ) then
        -- display time
        local current_time = os.date("%H%M")
        local fontface="Dustismo"
        local r,g,b,a = 1,1,1,0.3
        cairo_set_source_rgba (cr,r,g,b,a)
        cairo_select_font_face(cr,fontface,CAIRO_FONT_SLANT_NORMAL,CAIRO_FONT_WEIGHT_BOLD)
        cairo_set_font_size (cr,24)
        local xt,yt = position_text(cr,current_time,xSun,ySun-6,2)
        cairo_move_to (cr,xt,yt)
        cairo_show_text (cr,current_time)
        cairo_stroke (cr)
        
        -- display date
        local cal = os.date("%a %d %b")
        local fontface="Dustismo"
        local r,g,b,a = 1,1,1,0.3
        cairo_set_source_rgba (cr,r,g,b,a)
        cairo_select_font_face(cr,fontface,CAIRO_FONT_SLANT_NORMAL,CAIRO_FONT_WEIGHT_BOLD)
        cairo_set_font_size (cr,12)
        local xt,yt = position_text(cr,cal,xSun,ySun+10,1)
        cairo_move_to (cr,xt,yt)
        cairo_show_text (cr,cal)
        cairo_stroke (cr)
        
    --  print location
        local fontface="Dustismo"
        local r,g,b,a = 1,1,1,0.4
        cairo_set_source_rgba (cr,r,g,b,a)
        cairo_select_font_face(cr,fontface,CAIRO_FONT_SLANT_NORMAL,CAIRO_FONT_WEIGHT_NORMAL)
        cairo_set_font_size (cr,10)
        local xt,yt = position_text(cr,loc,xSun,ySun+25,1)
        cairo_move_to (cr,xt,yt)
        cairo_show_text (cr,loc)
        cairo_stroke (cr)
    else
        print_location_text(xSun,ySun+1.4*radiusSun)
    end

end

function print_location_text(x,y)
   -- display time
    local current_time = os.date("%H%M")
    local fontface="Dustismo"
    local r,g,b,a = 1,1,1,0.3
    cairo_set_source_rgba (cr,r,g,b,a)
    cairo_select_font_face(cr,fontface,CAIRO_FONT_SLANT_NORMAL,CAIRO_FONT_WEIGHT_BOLD)
    cairo_set_font_size (cr,24)
    local xt,yt = position_text(cr,current_time,x,y,2)
    cairo_move_to (cr,xt,yt)
    cairo_show_text (cr,current_time)
    cairo_stroke (cr)
    
    -- display date
    local cal = os.date("%a %d %b")
    local fontface="Dustismo"
    local r,g,b,a = 1,1,1,0.3
    cairo_set_source_rgba (cr,r,g,b,a)
    cairo_select_font_face(cr,fontface,CAIRO_FONT_SLANT_NORMAL,CAIRO_FONT_WEIGHT_BOLD)
    cairo_set_font_size (cr,12)
    local xt,yt = position_text(cr,cal,x,y+10,1)
    cairo_move_to (cr,xt,yt)
    cairo_show_text (cr,cal)
    cairo_stroke (cr)
    
--  print location
    local fontface="Dustismo"
    local r,g,b,a = 1,1,1,0.4
    cairo_set_source_rgba (cr,r,g,b,a)
    cairo_select_font_face(cr,fontface,CAIRO_FONT_SLANT_NORMAL,CAIRO_FONT_WEIGHT_NORMAL)
    cairo_set_font_size (cr,10)
    local xt,yt = position_text(cr,loc,x,y+25,1)
    cairo_move_to (cr,xt,yt)
    cairo_show_text (cr,loc)
    cairo_stroke (cr)
end

function sun_rise_set()
    sunupH = string.sub(sunrise,1,2)
    sunupM = string.sub(sunrise,3,4)
    sundownH = string.sub(sunset,1,2)
    sundownM = string.sub(sunset,3,4)

    minSR_arc = 360/60*sunupM
    hourSR_arc = (360/24*sunupH + minSR_arc/24) + 90
    pos_SR = angle_to_position(start_angle,hourSR_arc)

    minSS_arc = 360/60*sundownM
    hourSS_arc = (360/24*sundownH + minSS_arc/24) + 90
    pos_SS = angle_to_position(start_angle,hourSS_arc)

    return sunrise,sunset,pos_SR,pos_SS
end

function draw_thermometer(cr,x,y,wT,hT)
    local alpha=0.5
    HT = y+hT
    pat = cairo_pattern_create_linear (x,y,wT,HT)
    cairo_pattern_add_color_stop_rgba (pat, 1,   0,  0, 1, alpha)
    cairo_pattern_add_color_stop_rgba (pat, 0.4, 1,0.8, 0, alpha)
    cairo_pattern_add_color_stop_rgba (pat, 0.3, 1,0.3, 0, alpha)
    cairo_pattern_add_color_stop_rgba (pat, 0, 1,0, 0, alpha)

    cairo_rectangle (cr, x,y,wT,HT)
    cairo_set_source (cr, pat)
    cairo_fill (cr)
    cairo_pattern_destroy (pat)

    draw_temperature(cr,x,y,hT,temperature)
end

function draw_temperature(cr,x,y,hT,Tdegrees)
    local range=hT/100
    local zero = y + range*60
    local T = Tdegrees*range
    t = tostring(Tdegrees)
    t = ( t .. "°C" )
    cairo_set_source_rgba (cr,1,1,1,0.5)
    cairo_set_line_width(cr,1)

    for i = 0,100,10 do -- draw 10 degree marks
        local l = 3
        local xT = x-1
        if ( i == 60 ) then -- longer mark for freezing point
            xT = x-6
            l = -12
        end
        cairo_move_to (cr,xT,y)
        cairo_rel_line_to (cr,-l,0)
        cairo_stroke (cr)
        y = y + range*10
    end

    cairo_set_source_rgba (cr,1,1,1,0.5)
    cairo_set_line_width(cr,3)
    cairo_set_line_cap(cr, CAIRO_LINE_CAP_ROUND)
    cairo_move_to(cr,x-1,zero-T)    -- temperature indicator
    cairo_rel_line_to(cr,10,0)

    -- temperature text
    print_text(cr,t,x+28,zero-T,1,10)
    -- zero degrees text
    print_text(cr,"0",x-12,zero,1,12)
end

function draw_wind_rose()
    draw_marks(cr,xW,yW,radiusW)
    draw_WindArrow(cr,xW,yW,50,direction,radiusW-8)
    draw_NESW(cr,xW,yW,radiusW,10)
    
--  print windspeed
    local fontface="Dustismo"
    local r,g,b,a = 1,1,1,0.4
    cairo_set_source_rgba (cr,r,g,b,a)
    cairo_select_font_face(cr,fontface,CAIRO_FONT_SLANT_NORMAL,CAIRO_FONT_WEIGHT_BOLD)
    cairo_set_font_size (cr,16)
    local xt,yt = position_text(cr,windS,xW,yW,2)
    cairo_move_to (cr,xt,yt)
    cairo_show_text (cr,windS)
    cairo_stroke (cr)

--  print weather conditions
    local fontface="Dustismo"
    local r,g,b,a = 1,1,1,0.4
    cairo_set_source_rgba (cr,r,g,b,a)
    cairo_select_font_face(cr,fontface,CAIRO_FONT_SLANT_NORMAL,CAIRO_FONT_WEIGHT_NORMAL)
    cairo_set_font_size (cr,10)
    local xt,yt = position_text(cr,wx,xW,yW+10,1)
    cairo_move_to (cr,xt,yt)
    cairo_show_text (cr,wx)
    cairo_stroke (cr)
end

function draw_WindArrow(cr,x, y, length, bearing,radiusW)
    -- startpoint x, startpoint y, length of side, compass bearing
    local head_ratio = 1.05 -- ratio of side to overall length
    local head_angle = 0.02 -- proportion 0 - 0.5 (straight, at right angle to direction)
    
    local x1=x- (math.sin(bearing)*radiusW)
    local y1=y- (math.cos(bearing)*radiusW)
    --arrow body
    local angle = bearing
    local x0 = x1 + (math.sin(angle) * length)
    local y0 = y1 + (math.cos(angle) * length)
    local xtext = x1 + (math.sin(angle) * 0.25*length)
    local ytext = y1 + (math.cos(angle) * 0.25*length)

    --arrow head left
    angle = bearing - (head_angle * math.pi)
    x2 = x0 - (math.sin(angle) * length * head_ratio)
    y2 = y0 - (math.cos(angle) * length * head_ratio)

    --arrow head right
    angle = bearing + (head_angle * math.pi)
    x3 = x0 - (math.sin(angle) * length * head_ratio)
    y3 = y0 - (math.cos(angle) * length * head_ratio)
    
    start_x=(x0+x2+x3)/3
    start_y=(y0+y2+y3)/3
    
    cairo_set_source_rgba (cr,1,1,1,0.5)
    cairo_move_to (cr,start_x,start_y)
    cairo_line_to (cr,x2,y2)
    cairo_line_to (cr,x1,y1) 
    cairo_line_to (cr,x3,y3) 
    cairo_close_path (cr)
    cairo_fill(cr)
    cairo_stroke (cr)
    
    return true
end

--  display compass points
function draw_NESW(cr,x,y,rt,font_size)
    local compass={0,90,180,270}
    local cpoints={"N","E","S","W"}
    radiusW=rt+12
    
    for i = 1,4,1 do
        compass_point=-math.pi*(tonumber(compass[i]))/180
        local x1=x - (math.sin(compass_point)*radiusW)
        local y1=y - (math.cos(compass_point)*radiusW)
        local t = cpoints[i]
        print_text(cr,t,x1,y1,1,font_size)
    end
end

--  draw compass rose graduations
function draw_marks(cr,x,y,r)
    local angle=0
    local inner=r-2
    local outer=r+2

    local r,g,b,a=1,1,1,0.5
    cairo_set_source_rgba (cr,r,g,b,a)
    cairo_set_line_width(cr, 1)

    for i = 0,36,1 do   -- draw small ticks, every 10 deg
        compass_arc=(-2*math.pi/360)*angle
        local x0 = x - (math.sin(compass_arc) * inner)
        local y0 = y - (math.cos(compass_arc) * inner)
        local endx = x - (math.sin(compass_arc) * outer)
        local endy = y - (math.cos(compass_arc) * outer)
        
        if ( (i/3) - math.floor(i/3) ~= 0 ) then -- don't draw every third tick
            cairo_move_to (cr,x0,y0)
            cairo_line_to(cr,endx,endy)
            cairo_stroke(cr)
        end
        angle=angle+10
    end
    
    angle=0 -- re-set angle
    
    for i = 0,12,1 do       -- draw large ticks, every 30 deg
        compass_arc=(-2*math.pi/360)*angle
        x0 = x - (math.sin(compass_arc) * (inner-5))
        y0 = y - (math.cos(compass_arc) * (inner-5))
        endx = x - (math.sin(compass_arc) * outer)
        endy = y - (math.cos(compass_arc) * outer)
        
        cairo_move_to (cr,x0,y0)
        cairo_line_to(cr,endx,endy)
        cairo_stroke(cr)
        angle=angle+30
    end
end

function print_text(cr,t,xT,yT,posT,font_size)
--  align text, using text area extents
    -- posT:        0 = none
    --              1 = align both
    --              2 = horizontal
    --              3 = vertical
    --              4 = left
    cairo_set_font_size (cr,font_size)
    if ( posT == 0 ) then
        xt = xT
        yt = yT
    else
        xt,yt = position_text(cr,t,xT,yT,posT)
    end
    cairo_move_to (cr,xt,yt)
    cairo_show_text (cr,t)
    cairo_stroke (cr)
end

function position_text(cr,t,text_x,text_y,pos)
    -- adjust text position
    -- get text area (x_bearing,y_bearing,width,height,x_advance,y_advance)
    te=cairo_text_extents_t:create()
    cairo_text_extents(cr,t,te)
    xtext = text_x
    ytext = text_y
    
    if ( pos == 1 ) then    -- centre text
        xtext = text_x - te.width/2
        ytext = text_y + te.height/2
    elseif ( pos == 2 ) then    -- horizontal align
        xtext = text_x - te.width/2
    elseif ( pos == 3 ) then    -- vertical align
        ytext = text_y + te.height/2
    elseif ( pos == 4 ) then    -- set right edge of text to pos
        xtext = text_x - te.width
    end

    return xtext,ytext
end

EDIT:  some code corrections

HI!
Congratulations for this awesome lua script wink
I don't have wind now and the lua script doesn't like it ... I got an error about the wind in the lua script, I can't code in lua I'm doing the same as Sector11 copy&paste 8o In advance thanks for help wink :

/home/raphix/.config/conky/scripts/lua-weather.sh: ligne 110 : printf: null: nombre non valable
Conky: llua_do_call: function conky_main execution failed: /home/raphix/.config/conky/scripts/lua-weather.lua:95: attempt to perform arithmetic on a nil value
Conky: llua_do_call: function conky_main execution failed: /home/raphix/.config/conky/scripts/lua-weather.lua:95: attempt to perform arithmetic on a nil value
Conky: llua_do_call: function conky_main execution failed: /home/raphix/.config/conky/scripts/lua-weather.lua:95: attempt to perform arithmetic on a nil value
Conky: llua_do_call: function conky_main execution failed: /home/raphix/.config/conky/scripts/lua-weather.lua:95: attempt to perform arithmetic on a nil value
Conky: llua_do_call: function conky_main execution failed: /home/raphix/.config/conky/scripts/lua-weather.lua:95: attempt to perform arithmetic on a nil value
Conky: llua_do_call: function conky_main execution failed: /home/raphix/.config/conky/scripts/lua-weather.lua:95: attempt to perform arithmetic on a nil value
Conky: llua_do_call: function conky_main execution failed: /home/raphix/.config/conky/scripts/lua-weather.lua:95: attempt to perform arithmetic on a nil value
Conky: llua_do_call: function conky_main execution failed: /home/raphix/.config/conky/scripts/lua-weather.lua:95: attempt to perform arithmetic on a nil value
Conky: llua_do_call: function conky_main execution failed: /home/raphix/.config/conky/scripts/lua-weather.lua:95: attempt to perform arithmetic on a nil value
Conky: received SIGINT or SIGTERM to terminate. bye!

Last edited by ragamatrix (2016-07-06 14:09:31)

arpinux | dub | Screenshots DF | wallpaperspace

Offline

#183 2016-07-06 14:16:31

damo
....moderator....
Registered: 2015-08-20
Posts: 6,734

Re: Show us your conky

^ I am getting the same for some locations ATM (my current location for example current location is working again ) - I think openweather must be having issues with many stations. Others are working though, so perhaps test if this is the problem by using eg:

${execi <interval> /path/to/lua-weather.sh glasgow,uk}

TODO: I don't have much error-checking in the script yet!

EDIT: Try this code for the 'get_vals( )' function:

-- read values from datafile
function get_vals()
    local path = datafile
    local file = io.open( path)
    local array = {}
    local i=0
    
    if (file) then
        -- read all contents of file into array
        for line in file:lines() do
            i=i+1
            array[i]=line
        end
        file:close()

        dir=tostring(array[1]) -- get wind direction, convert to value required
        if ( dir == "null" ) then
            winddir=-math.pi*(tonumber(0))/180
            wind_speed="No wind data"
        else
            winddir=-math.pi*(tonumber(dir))/180
            wind_speed=tostring(array[2])  -- windspeed knots
        end
        temperature=tonumber(array[5])
        sunrise=array[3]
        sunset=array[4]
        location=array[6]
        weather=array[7]

        return winddir,wind_speed,temperature,sunrise,sunset,location,weather
    else
        print("datafile " .. datafile .. " not found")
    end
end

Last edited by damo (2016-07-06 15:19:46)

Be Excellent to Each Other...
The Bunsenlabs Lithium Desktop » Here
FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Offline

#184 2016-07-06 16:24:44

ragamatrix
Member
Registered: 2015-10-04
Posts: 427

Re: Show us your conky

^Hey Damo, I tried it: 

${execi <interval> /path/to/lua-weather.sh horgen,ch}

and it works fine. Thanks for the tipp.
I'll try the second code when I'll have more time.

arpinux | dub | Screenshots DF | wallpaperspace

Offline

#185 2016-07-06 17:33:55

Nili
Member
From: $HOME/♫♪
Registered: 2015-09-30
Posts: 1,271
Website

Re: Show us your conky

conky-cli

out_to_console yes
background no
update_interval 2
total_run_times 0
use_spacer none

TEXT
^fg(\#453C49)^i($HOME/.config/dzcon/arr.xbm)^bg(\#453C49)^fg(\#B5B5BA)^i($HOME/.config/dzcon/cat.xbm) ${uptime_short}^ca()^fg(\#2A242D)^i($HOME/.config/dzcon/arr.xbm)^bg(\#2A242D)#/
^fg(\#453C49)^i($HOME/.config/dzcon/arr.xbm)^bg(\#453C49)^fg(\#B5B5BA)^i($HOME/.config/dzcon/diskette.xbm) ${fs_used_perc /}%^ca()^fg(\#2A242D)^i($HOME/.config/dzcon/arr.xbm)^bg(\#2A242D)#/
^fg(\#453C49)^i($HOME/.config/dzcon/arr.xbm)^bg(\#453C49)^fg(\#B5B5BA)^i($HOME/.config/dzcon/cpu.xbm) ^ca(1,urxvt -e top -u ${exec whoami})${cpu cpu1}% ${cpu cpu2}%^ca()^fg(\#2A242D)^i($HOME/.config/dzcon/arr.xbm)^bg(\#2A242D)#/
^fg(\#453C49)^i($HOME/.config/dzcon/arr.xbm)^bg(\#453C49)^fg(\#B5B5BA)^i($HOME/.config/dzcon/mem.xbm) ${memperc}%^ca()^fg(\#2A242D)^i($HOME/.config/dzcon/arr.xbm)^bg(\#2A242D)#/
^fg(\#6e8c6e) ^i($HOME/.config/dzcon/net_up_02.xbm) ^fg(\#6e8c6e)${upspeed eth0} ${totalup eth0} #/
^fg(\#5C5C61) / #/
^fg(\#a7664a) ^i($HOME/.config/dzcon/net_down_02.xbm) ^fg(\#a7664a)${downspeed eth0} ${totaldown eth0} #/
^fg(\#453C49)^i($HOME/.config/dzcon/arr.xbm)^bg(\#453C49)^fg(\#B5B5BA)^ca(1,amixer set Master 1+)+^ca() ^i($HOME/.config/dzcon/spkr_01.xbm)^ca(1,urxvt -e alsamixer) ${exec amixer get Master -M | grep -oE "[[:digit:]]*%"}^ca()^ca(1,amixer set Master 1-) -^ca()^fg(\#2A242D)^i($HOME/.config/dzcon/arr.xbm)^bg(\#2A242D)#/
^fg(\#453C49)^i($HOME/.config/dzcon/arr.xbm)^bg(\#453C49)^fg(\#B5B5BA)^i($HOME/.config/dzcon/clock.xbm) ^ca(1,urxvt -geometry 56x10-8+855 -e bash -c "ncal -3 && sleep 5")${time %a %d, %I:%M %p}^ca()^fg(\#2A242D)^i($HOME/.config/dzcon/arr.xbm)^bg(\#2A242D)   #/
^fg(\#4b4b56)^i($HOME/.config/dzcon/arr.xbm)^bg(\#4b4b56)^ca(1,urxvt -e tmux)^fg(\#c3c3c6)^i($HOME/.config/dzcon/term.xbm) Term^ca()#/
^fg(\#6e8c6e)^i($HOME/.config/dzcon/arr.xbm)^bg(\#6e8c6e)^ca(1,$HOME/.config/palemoon/palemoon)^fg(\#464F53)^i($HOME/.config/dzcon/fox.xbm) Web^ca()#/
^fg(\#cba264)^i($HOME/.config/dzcon/arr.xbm)^bg(\#cba264)^ca(1,spacefm)^fg(\#464F53)^i($HOME/.config/dzcon/pacman.xbm) File^ca()#/
^fg(\#a7664a)^i($HOME/.config/dzcon/arr.xbm)^bg(\#a7664a)^ca(1,$HOME/.dbeef/deadbeef)^fg(\#464F53)^i($HOME/.config/dzcon/phones.xbm) Music^ca()#/
^fg(\#4b4b56)^i($HOME/.config/dzcon/arr.xbm)^bg(\#4b4b56)^fg(\#c3c3c6)^i($HOME/.config/dzcon/shroom.xbm) ^ca(1,xdotool key Insert)${exec whoami}@$nodename^ca()^fg(\#2A242D)^i($HOME/.config/dzcon/arr.xbm)^bg(\#2A242D)^fg(\#B5B5BA)^ca(1,xdotool key alt+4)4^ca() ^ca(1,xdotool key alt+5)5^ca() ^ca(1,xdotool key alt+6)6^ca() ^ca(1,xdotool key alt+7)7^ca()#/

dzen2

#!/bin/sh
FONT='Ohsnap-9'
exec conky -d -c "./.config/dzcon/conky" | dzen2 -e 'button2=;' -bg "#2A242D" -ta right -w 2000 -h 14 -x 0 -y 1 -fn $FONT &
exit 0

arrow (rename to whatever.xbm) to make <arrow<. I made it "arr.xbm".

#define r_arr_width 10
#define r_arr_height 16
static unsigned char r_arr_bits[] = {
   0x00, 0x02, 0x00, 0x03, 0x80, 0x03, 0xc0, 0x03, 0xe0, 0x03, 0xf0, 0x03,
   0xf8, 0x03, 0xfc, 0x03, 0xfc, 0x03, 0xf8, 0x03, 0xf0, 0x03, 0xe0, 0x03,
   0xc0, 0x03, 0x80, 0x03, 0x00, 0x03, 0x00, 0x02 };

screenshot

credit:
PackRat, for clickable dzen2
baoquocphan, for r_arr.xbm
dkeg, for awesome soft colors palette.
ohsnap font.

-Revised-

Edited
Added:
1) click-able workspaces 4/5/6/7 - I have busy 1/2/3/4 with apps that auto-start from spectrwm. 4/5/6/7 are free
2) click-able top with "-u" feature like top -u Nili @ cpu usage
3) click-able alsamixer as well vol +/- as up/down
4) click-able calendar using "ncal -3" with auto hide after 5sec.

I tried to put in work existing features without any external code.

Requires: conky-cli/dzen2 / xdotool, urxvt, window manager (wm) & xbm icons

Last edited by Nili (2016-07-13 13:12:53)

Tumbleweed | KDE Plasma

Offline

#186 2016-07-06 21:22:29

damo
....moderator....
Registered: 2015-08-20
Posts: 6,734

Re: Show us your conky

Conky/LUA Weather Widgets Update

damo wrote:

....
I must admit to a childish glee at sunset a few minutes ago, and seeing the sun go dim in the conky big_smile Maybe I can get it to fade the colour change, like a real sunset......

Colour change for sunrise+10mins, and sunset-10mins can be achieved by changing

    -- set colour & alpha, for day/night
    if ( tonumber(current_time) > tonumber(sunrise) ) and ( tonumber(current_time) < tonumber(sunset) ) then
        r,g,b,a = 1,1,0,0.4 --day
    else
        r,g,b,a = 0.5,0.5,0.5,0.4 --night
    end

to

    -- set colour & alpha, for day/night
    local r,g,b,a = sun_colour()

and adding a "sun_colour( )" function...

function sun_colour()   -- get dawn/day/evening/night colour (depending on current time)
    -- date/time math needs values from date object
    local r,g,b,a = 1,1,1,1

    t_obj = os.date('*t')   -- get date object
    
    t_now = t_obj
    --t_now.hour = 5    -- for testing
    --t_now.min = 14
    time_now = os.date("%H%M", os.time(t_now)) -- get time now, hours(24),mins

    t_sunrise = t_obj
    t_sunrise.hour = sunupH
    t_sunrise.min = sunupM
    time_sunrise = os.date("%H%M", os.time(t_sunrise))
    
    t_sunrise10 = t_obj
    t_sunrise10.min = sunupM + 10
    time_sunrise10 = os.date("%H%M", os.time(t_sunrise10))

    t_sunset = t_obj
    t_sunset.hour = sundownH
    t_sunset.min = sundownM
    time_sunset = os.date("%H%M", os.time(t_sunset))

    t_sunset10 = t_obj
    t_sunset.hour = sundownH
    t_sunset10.min = sundownM - 10
    time_sunset10 = os.date("%H%M", os.time(t_sunset10))

    if ( time_now >= time_sunrise ) and ( time_now <= time_sunrise10 ) then
        r,g,b,a = 1,0.6,0,0.4 --dawn
    elseif ( time_now > time_sunrise10 ) and ( time_now < time_sunset10 ) then
        r,g,b,a = 1,1,0,0.4 --day
    elseif ( time_now <= time_sunset ) and ( time_now >= time_sunset10 ) then
        r,g,b,a = 1,0.2,0,0.4 --evening
    elseif ( time_now < time_sunrise ) or ( time_now > time_sunset ) then
        r,g,b,a = 0.5,0.5,0.5,0.4 --night
    end
    
    return r,g,b,a
end

Be Excellent to Each Other...
The Bunsenlabs Lithium Desktop » Here
FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Offline

#187 2016-07-07 14:05:58

ragamatrix
Member
Registered: 2015-10-04
Posts: 427

Re: Show us your conky

@damo
I'm waiting for the sunset with your changings.
Thanks again for your lua artistic drawings wink
I'll check later how to change opacity to make it more contrasted...
mini_160707041654580710.png

arpinux | dub | Screenshots DF | wallpaperspace

Offline

#188 2016-07-07 14:20:37

damo
....moderator....
Registered: 2015-08-20
Posts: 6,734

Re: Show us your conky

ragamatrix wrote:

@damo
I'm waiting for the sunset with your changings.
Thanks again for your lua artistic drawings wink
I'll check later how to change opacity to make it more contrasted...

Look for the "r,g,b,a" values. "a" is alpha transparency. For example, change the last number in

cairo_set_source_rgba (cr,1,1,1,0.5)
or
cairo_pattern_add_color_stop_rgba(border_pat,0,1,1,0,0.3)
etc

At some point I intend to try with a Settings table at the start, but meanwhile positions, colours etc need to be set individually in the functions.

Be Excellent to Each Other...
The Bunsenlabs Lithium Desktop » Here
FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Offline

#189 2016-07-07 15:02:23

ragamatrix
Member
Registered: 2015-10-04
Posts: 427

Re: Show us your conky

^thanks yes I knew and I added 3 points alpha everywhere now I can see from a bit far away the screen...
But I didn't find how to display ":" for the sunrise and sunset time ?
mini_160707051923828789.png

Last edited by ragamatrix (2016-07-07 15:07:42)

arpinux | dub | Screenshots DF | wallpaperspace

Offline

#190 2016-07-07 15:17:50

damo
....moderator....
Registered: 2015-08-20
Posts: 6,734

Re: Show us your conky

ragamatrix wrote:

...
But I didn't find how to display ":" for the sunrise and sunset time ?

Add these lines at the beginning of "function sun_text(xr,yr,xs,ys)"

    -- display sunrise time
    sunrise1 = string.sub(sunrise,1,2)
    sunrise2 = string.sub(sunrise,3,4)
    sunset1 = string.sub(sunset,1,2)
    sunset2 = string.sub(sunset,3,4)
    
    local sunrise = ( sunrise1 .. ":" .. sunrise2 )
    local sunset = ( sunset1 .. ":" .. sunset2 )

Be Excellent to Each Other...
The Bunsenlabs Lithium Desktop » Here
FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Offline

#191 2016-07-07 16:04:02

ragamatrix
Member
Registered: 2015-10-04
Posts: 427

Re: Show us your conky

damo wrote:
ragamatrix wrote:

...
But I didn't find how to display ":" for the sunrise and sunset time ?

Add these lines at the beginning of "function sun_text(xr,yr,xs,ys)"

    -- display sunrise time
    sunrise1 = string.sub(sunrise,1,2)
    sunrise2 = string.sub(sunrise,3,4)
    sunset1 = string.sub(sunset,1,2)
    sunset2 = string.sub(sunset,3,4)
    
    local sunrise = ( sunrise1 .. ":" .. sunrise2 )
    local sunset = ( sunset1 .. ":" .. sunset2 )

Perfect!
You're good thanks wink

arpinux | dub | Screenshots DF | wallpaperspace

Offline

#192 2016-08-12 22:26:19

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,008

Re: Show us your conky

Saw this on the net today, had to grab it and modify it to my system.
2016_08_12_19_17_48_Scrot11.jpg
Pretty cool Stargate theme.

Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#193 2016-08-22 22:57:18

VinDSL
Member
From: Peppermint OS
Registered: 2016-08-22
Posts: 16
Website

Re: Show us your conky

Hello BunsenLabs Conkystadors !  smile

Here are a couple of recent screenies (different 1.10.x 'conky-all' versions) ...


Peppermint 7 - Conky 1.10.1-3 - Conkywx 5.0.0-1

VinDSL_2016-08-10_16:56:46(250x200).png


Peppermint 7 - Conky 1.10.3-1 - Conkywx 5.0.0-1

VinDSL_2016-08-22_11:53:42(250x200).png


I'm not going post everything in this showcase thread, but here's my latest '.conkyrc' file.


--##################################################
--## VinDSL | rev 16-08-22 01:19 | v.1.10.3-1-P7  ##
--##################################################
--##             August 2016 Series               ##
--##################################################

--## ¡PLEASE READ THE FINE PRINT! ##

--####
--## Development Platforms (current)
--#
--#  Peppermint Linux OS Seven        (GNOME 3.18 - Conky 1.10.3-1)
--#  Ubuntu 16.10 'Yakkety Yak'       (GNOME-SHELL - UNITY - Conky 1.10.3-1)
--#  Screen Resolution: 1280x1024x24  (DELL UltraSharp 1907FP)
--#
--## Tips n' Tricks: Conky 1.8.x - 1.9.x will no longer be supported. RIP :)

--####
--## Prerequisites (required)
--#
--#  conky-all 1.10.3-1 backport
--#  Conkywx 5.0.0-x (Paramvir Likhari)
--#  UTF-8 Compatible Text Editor
--#  mesa-utils - Basic GL Utilities

--## DBus toolsets (required for experimental music players below)
--## Install one PAIR or the other PAIR (but NOT both pair) depending on your distro,
--## Examples from Ubuntu PPA - package names are in ('parenthesis'):
--#
--#  Qt 4 D-Bus tool ('qdbus') & Qt 4 development tools ('qt4-dev-tools')
--#  Qt 5 D-Bus tool ('qdbus-qt5') & Qt 5 base development programs ('qtbase5-dev-tools')

--####
--## Installed fonts (required)
--#
--#  Arrows (JLH Fonts - not included in link below)
--#  ConkyWeather (Stanko Metodiev)
--#  Cut Outs for 3D FX (Fonts & Things)
--#  Droid Font Family (Google Android SDK)
--#  KR A Round (Kat's Fun Fonts)
--#  Moon Phases (Curtis Clark)
--#  OpenLogos (Icoma)
--#  PizzaDude Bullets (Jakob Fischer)
--#  Radio Space (Iconian Fonts)
--#  StyleBats (Vinterstille)
--#  Ubuntu Font Family (Canonical Ltd)
--#  Ubuntu Title Bold (Paulo Silva - not included in link below)
--#  Weather (Jonathan Macagba)
--#
--## Tips n' Tricks from: Mr. Peachy, djyoung4, and 42dorian (Thanks!)
--## Most of the necessary fonts can be downloaded here: http://goo.gl/QPBcPm
--## Unzip the fonts into your font folder, for example: /home/username/.fonts
--## Run this command in a terminal (rebuilds font cache file): sudo fc-cache -fv

conky.config = {

--####
--## Use XFT? Required to Force UTF8 (see below)
--#
use_xft = true,
font = 'DroidSansFallback:size=9.55',
xftalpha = 0.1,

--####
--## Force UTF8? Requires XFT (see above)
--## Displays degree symbol, instead of °, etc.
--#
override_utf8_locale = true,

--####
--## This buffer is used for single lines, text, output from $exec, and other variables.
--## Increasing the 'text_buffer_size' (too high) will drastically reduce Conky's performance.
--## Decreasing the buffer size (too low) will truncate content and cause strange display output.
--## Standard text buffer size is 256 bytes (cannot be less). Adjust YOUR buffer wisely!
--## Tips n' Tricks from dk75:"You don't need to create a 12KiB buffer for every Conky config line."
--#
text_buffer_size = 4352,

--####
--## Maximum number of special things, e.g. fonts, offsets, aligns, etc. (default is 512)
--## Tips n' Tricks from: sparker256 (Thanks, Bill!)
--## (Currently not working in Conky 1.10.3-1 - Disabled)
--#
--max_specials 600,

--####
--## Maximum size of user text buffer, e.g. for layout below TEXT line (default is 16384)
--## Increase this, as needed, to accommodate large config files with a great deal of text.
--## Tips n' Tricks from: Cavsfan
--#
max_user_text = 32768,

--####
--## Daemonize Conky, aka 'fork to background'.
--#
background = true,

--####
--## Update interval in seconds.
--#
update_interval = 2.0,

--####
--## The number of times Conky will update before quitting.
--## Zero makes Conky run forever.
--#
total_run_times = 0,

--####
--## Create 'own_window' type. Makes Conky behave like other panels.
--#
own_window = true,
own_window_transparent = true,
own_window_type = 'normal',
own_window_hints = 'undecorated,below,sticky,skip_taskbar,skip_pager',
--####
--## Some distros require the following lines for TRUE transparency.
--## BOTH of these lines need to be Commented/Uncommented in tandem.
--#
--own_window_argb_visual = true,
--own_window_argb_value = 255,
--####
--## Don't want TRUE transparency? (icons look janky on certain walls)
--## Comment BOTH of the lines above and Uncomment the line below.
--#
own_window_argb_visual = false,

--####
--## Force images to redraw when they change.
--#
imlib_cache_size = 1,

--####
--## Use double buffering? Reduces flicker.
--#
double_buffer = true,

--####
--## Draw shades?
--#
draw_shades = false,
default_shade_color = '333300',
--# default_shade_color = '3c3c3c',
--# default_shade_color = '494949',
--# default_shade_color = '565656',
--# default_shade_color = '626262',

--####
--## Draw outlines?
--#
draw_outline = false,

--####
--## Draw borders around text?
--#
draw_borders = false,

--####
--## Draw borders around graphs?
--#
draw_graph_borders = false,

--####
--## Print text in X?
--## Print text in console?
--## Print text to stdout?
--#
out_to_x = true,
out_to_console = false,
out_to_ncurses = false,

--####
--## Text alignment.
--#
alignment = 'top_right',

--####
--## Minimum size of the text area.
--#
minimum_width = 245,
minimum_height = 1394,

--####
--## Maximum width of the text area.
--#
maximum_width = 245,

--####
--## Gap between text and screen borders.
--#
gap_x = 6,  --# Left/Right
gap_y = 32, --# Top/Bottom

--####
--## Shorten MiB/GiB to M/G in stats.
--#
short_units = true,

--####
--## Pad % symbol spacing after numbers.
--#
pad_percents = 0,

--####
--## Pad spacing between text and borders.
--#
border_inner_margin = 4,

--####
--## Limit the length of names in "Top Processes".
--#
top_name_width = 10,

--####
--## Subtract file system -/+buffers/cache from used memory?
--## Set to true, to produce meaningful physical memory stats.
--#
no_buffers = true,

--####
--## Set to true, if you want all text to be in UPPERCASE.
--#
uppercase = false,

--####
--## Number of cpu samples to average.
--## Set to 1 to disable averaging.
--#
cpu_avg_samples = 2,

--####
--## Number of net samples to average.
--## Set to 1 to disable averaging.
--#
net_avg_samples = 2,

--####
--## Add spaces to keep things from moving around?
--## Only affects certain objects.
--#
use_spacer = 'right',

--####
--## My colors (suit yourself)
--#
color0 = 'white',		--#FFFFFF
color1 = 'ivory',		--#FFFFF0
color2 = 'ivory2',		--#EEEEE0
color3 = 'ivory3',		--#CDCDC1
color4 = 'ffcc66',		--#FFCC66
color5 = 'ivory3',		--#CDCDC1
color6 = 'gray',		--#BEBEBE
color7 = 'antiquewhite4',	--#8B8378
color8 = 'dimgray',		--#696969
color9 = 'tomato',		--#FF6347

--#####
--## Load Lua for shading (optional)
--## Set the path to your script here.
--## (Currently not working in Conky 1.10.3-1 - Disabled)
--#
-- lua_load = '~/.conky/draw_bg.lua',
-- lua_draw_hook_pre = 'draw_bg',

--####
--## Load Lua for bargraphs (required)
--## Set the path to your script here.
--#
lua_load = '~/.conky/bargraph_small.lua',
lua_draw_hook_post = 'main_bars',

--####
--## Define the locations of Conkywx files (required)
--## Set the path to your .confs and templates here.
--#
template0 = '/usr/share/conkywx/conkywx.sh',
template1 = '/home/vindsl/.config/conkywx/vindsl-imperial-conkywx.conf',
template2 = '/home/vindsl/.config/conkywx/vindsl-metric-conkywx.conf',
template3 = '/home/vindsl/.config/conkywx/wx-wu-vindsl-imperial-weather-dingbat-template.sh',
template4 = '/home/vindsl/.config/conkywx/wx-wu-vindsl-imperial-weather-graphic-template.sh',
template5 = '/home/vindsl/.config/conkywx/wx-wu-vindsl-metric-weather-dingbat-template.sh',
template6 = '/home/vindsl/.config/conkywx/wx-wu-vindsl-metric-weather-graphic-template.sh',
--##
--## Tips n' Tricks: type 'route' in CLI and check for interface names in the 'Iface' column .
--## Define the Wireless interface here - wlan0, wlan1, etc. (required)
--##
template7 = 'wlan0',
--##
--## Define the Wired interface name here - eth0, eth1, etc. (required)
--#
template8 = 'eno1'

} --end conky.config
conky.text = [[

##################################
##             LOGO             ##
##################################
## Uncomment for hard-coded ID (static)
# ${offset -3}${voffset -34}${font OpenLogos:size=106}${color2}v${font}${voffset -78}${goto 180}${font UbuntuTitleBold:size=19.55}${color2}${offset 4}1${offset 2}6${offset 1}.${offset 0}1${offset 1}0${font}
####
## Uncomment for soft-coded ID (dynamic)
# ${voffset -30}${font OpenLogos:size=103}${color2}v${font}${voffset -75}${goto 179}${font UbuntuTitleBold:size=19.6}${color4}${execpi 1800 cat /etc/*release | grep 'RELEASE' | awk -F'=' '{print $2}'}${font}
## Additional ID (branch version, code name, release date, etc.)
# ${voffset 0}${goto 185}${font Ubuntu-B:bold:size=7.55}${color5}${execpi 1800 conky --version | sed -n 1p | cut -b1-13}${font}
# ${voffset 0}${goto 182}${font Ubuntu-B:bold:size=7.55}${color5}Conky ${conky_version}${font}
# ${voffset 0}${goto 182}${font Ubuntu-B:size=8}${color4}Pre-Alpha${font}
####
## Uncomment to display YOUR custom graphic image (upper-right corner)
# ${voffset -30}${font OpenLogos:size=103}${color2}v${font}${voffset -52}${image /home/vindsl/Pictures/BDC/Avatar(Transparent-50)55x55.png -p 180,0 -s 52x52 -n}
${voffset -1}${image /home/vindsl/.conky/logos/peppermint_logo_small.png -n}${voffset 18}${goto 45}${font Ubuntu-B:bold:size=7.55}${color5}${font Ubuntu-B:bold:size=7.55}${color5}Conkywx ${execpi 1800 conkywx -v}${goto 180}Conky ${conky_version}${font}${voffset -5}
##################################
##            SYSTEM            ##
##################################
${voffset 4}${font DroidSans:bold:size=8.25}${color4}SYSTEM${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font OpenLogos:size=10}${color2}u${voffset -2}${font DroidSans:size=8.55}${color3}${offset 5}${execpi 1800 lsb_release -sd | sed -e 's/Ubuntu/Ubuntu/g' -e 's/development/dev/g'}${alignr}${execpi 1800 lsb_release -sr}${font}
# ${voffset 4}${font OpenLogos:size=10}${color2}u${voffset -4}${font DroidSans:size=8.55}${color3}${offset 5}${execpi 1800 lsb_release -sd}${alignr}32 Bit${font}
${voffset 0}${offset -2}${font OpenLogos:size=12}${color2}Z${voffset -4}${font DroidSans:size=8.55}${color3}${offset 3}${sysname}${offset 3}${kernel}${alignr}${font DroidSans:size=8.3}${machine}${font}
####
## Uncomment for nVidia ID (nvidia-smi version - dynamic)
# ${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.55}${color3}${offset 5}${execpi 1800 nvidia-smi -q | grep "Product Name" | sed -e 's/.*: /nVidia /'}${alignr}${execpi 1800 nvidia-smi -q | grep "Driver Version" | awk '{print $4}'}${font}
####
## Uncomment for 'nvidia-current' driver ID (DPKG version - hybrid)
# ${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.55}${color3}${offset 5}nVidia GeForce 7600 GT${alignr}${font DroidSans:size=8.3}${execpi 1800 dpkg --status nvidia-current | grep Version | cut -f 1 -d '-' | sed 's/[^.,0-9]//g'}${font}
####
## Uncomment for nvidia driver ID (OpenGL version - hydrid)
# ${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.55}${color3}${offset 5}nVidia GeForce 7600 GT${offset 3}(${offset 2}${execpi 2 nvidia-settings -q gpucoretemp -t --verbose=none | awk '{s+=$1}END{print s/NR}' RS=" "}°${offset 1})${alignr}${font DroidSans:size=8.3}${execpi 1800 glxinfo | grep 'OpenGL version string' | sed -e 's/OpenGL.*: //' | cut -c '14-20'}${font}
## Uncomment when running Nouveau drivers
# ${voffset 1}${font StyleBats:size=10}${color2}d${voffset -1}${font DroidSans:size=8.55}${color3}${offset 5}nVidia GeForce GT 710${voffset -2}${alignr}nouveau${font}
## Uncomment when running nVidia drivers with GPU temp
${voffset 1}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.55}${color3}${offset 5}nVidia GeForce GT 710${offset 3}(${offset 2}${execpi 2 nvidia-smi --query-gpu=temperature.gpu --format=csv,noheader,nounits}°${offset 1})${alignr}${font DroidSans:size=8.3}${execpi 1800 nvidia-smi -q | grep "Driver Version" | awk '{print $4}'}${font}
####
## Uncomment for hard-coded video ID (Nouveau version - static)
# ${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.55}${color3}${offset 5}nVidia GeForce 7600 GT${offset 2}${alignr}nouveau${font DroidSans:size=8.3}${font}
####
## Uncomment for hard-coded video ID (Generic version / any card / any driver - static)
# ${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.55}${color3}${offset 5}Video Card Product Name${alignr}Driver Version${font DroidSans:size=8.3}${font}
####
## Uncomment for CPU ID / CPU Temp / CPU frequency (hybrid)
# ${voffset 2}${font StyleBats:size=10}${color2}A${voffset 0}${font DroidSans:size=8.55}${color3}${offset 5}Intel${offset 3}P4${offset 3}Extreme${offset 3}Edition${offset 3}(${offset 2}${execpi 2 sensors | grep 'temp1' | cut -c16-17}°${offset 1})${alignr 1}${font DroidSans:size=8.3}${freq_g cpu0}${offset 1}GHz${font}
## Uncomment for CPU ID / CPU Temp / CPU frequency (hybrid)
${voffset 1}${font StyleBats:size=10}${color2}A${voffset -2}${font DroidSans:size=8.55}${color3}${offset 5}Intel${offset 3}Core${offset 3}i5-3470${offset 4}(${offset 2}${execpi 2 sensors | grep 'Core 0' | sed -n 1p | cut -b18-19}°${voffset -1}${offset 1})${alignr -3}${font DroidSans:size=8.3}${freq_g cpu0}${voffset -1}${offset 2}GHz${font}
####
## Uncomment for System Uptime (hybdid)
${voffset 2}${font StyleBats:size=10}${color2}q${voffset -2}${font DroidSans:size=8.55}${color3}${offset 5}System${offset 3}Uptime${voffset -1}${alignr}${font DroidSans:size=8.3}${uptime_short}${font}
##################################
##          PROCESSORS          ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}PROCESSORS${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 5}${font StyleBats:size=9.9}${color2}k${voffset -1}${font DroidSansFallback:size=8}${color3}${offset 2}CPU1${offset 5}${font DroidSans:size=8}${cpu cpu1}%${font DroidSansFallback:size=8}${goto 137}${voffset -1}CPU2${offset 5}${font DroidSans:size=8}${cpu cpu2}%${font}
${voffset 1}${font StyleBats:size=9.9}${color2}k${voffset -1}${font DroidSansFallback:size=8}${color3}${offset 2}CPU3${offset 5}${font DroidSans:size=8}${cpu cpu3}%${font DroidSansFallback:size=8}${goto 137}${voffset -1}CPU4${offset 5}${font DroidSans:size=8}${cpu cpu4}%${font}
##################################
##            MEMORY            ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}MEMORY${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 6}${font StyleBats:size=10}${color2}l${voffset -2}${font DroidSansFallback:size=8}${color3}${offset 3}RAM${goto 97}${font DroidSans:size=8.2}${mem}${goto 133}/${offset 5}${memmax}${alignr}${memperc}%${font}
##################################
##             HDD              ##
##################################
${voffset 14}${font DroidSans:bold:size=8}${color4}HDD${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 7}${font StyleBats:size=9.9}${color2}x${voffset -2}${font DroidSansFallback:size=8}${color3}${offset 4}ROOT${goto 95}${font DroidSans:size=8.2}${fs_used /}${goto 133}/${offset 5}${fs_size /}${alignr}${fs_free_perc /}%${font}
${voffset 16}${font StyleBats:size=9.9}${color2}x${voffset -2}${font DroidSansFallback:size=8}${color3}${offset 4}HOME${goto 95}${font DroidSans:size=8.2}${fs_used /home}${goto 133}/${offset 5}${fs_size /home}${alignr}${fs_free_perc /home}%${font}
${voffset 16}${font StyleBats:size=9.9}${color2}4${voffset -2}${font DroidSansFallback:size=8}${color3}${offset 4}SWAP${goto 95}${font DroidSans:size=8.2}${swap}${goto 133}/${offset 5}${swapmax}${alignr}${swapperc}%${font}
##################################
##         TOP PROCESSES        ##
##################################
${voffset 15}${font DroidSans:bold:size=8}${color4}TOP PROCESSES${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSansFallback:size=8.65}${color3}${offset 2}${top_mem name 1}${goto 120}${font DroidSans:size=8.2}${top_mem mem_res 1}${alignr}${top_mem mem 1}%${font}
${voffset 0}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSansFallback:size=8.65}${color3}${offset 2}${top_mem name 2}${goto 120}${font DroidSans:size=8.2}${top_mem mem_res 2}${alignr}${top_mem mem 2}%${font}
${voffset 0}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSansFallback:size=8.65}${color3}${offset 2}${top_mem name 3}${goto 120}${font DroidSans:size=8.2}${top_mem mem_res 3}${alignr}${top_mem mem 3}%${font}
# ${voffset 0}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSansFallback:size=8.65}${color3}${offset 2}${top_mem name 4}${goto 120}${font DroidSans:size=8.2}${top_mem mem_res 4}${alignr}${top_mem mem 4}%${font}
# ${voffset 0}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSansFallback:size=8.65}${color3}${offset 2}${top_mem name 5}${goto 120}${font DroidSans:size=8.2}${top_mem mem_res 5}${alignr}${top_mem mem 5}%${font}
# ${voffset 0}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSansFallback:size=8.65}${color3}${offset 2}${top_mem name 6}${goto 120}${font DroidSans:size=8.2}${top_mem mem_res 6}${alignr}${top_mem mem 6}%${font}
##################################
##   NETWORK - AUTO DETECTION   ##
##################################
## WIRELESS/WIFI SECTION ##
${if_existing /proc/net/route ${template7}}
${voffset -11}${font DroidSans:bold:size=8}${color4}WIFI NET${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font PizzaDudeBullets:size=9.5}${color6}T${font DroidSans:size=8.65}${color3}${offset 5}Download${goto 120}${font DroidSans:size=8.3}${totaldown ${template7}}${alignr}${font DroidSans:size=8.3}${downspeed ${template7}}${font}
${voffset 0}${font PizzaDudeBullets:size=9.5}${color6}N${font DroidSans:size=8.65}${color3}${offset 5}Upload${goto 120}${font DroidSans:size=8.3}${totalup ${template7}}${alignr}${font DroidSans:size=8.3}${upspeed ${template7}}${font}
${voffset 4}${font PizzaDudeBullets:size=9.5}${color6}a${font DroidSans:size=8.65}${color3}${offset 5}Private${offset 3}IP${goto 123}${font DroidSansFallback:size=8.5}LAN${alignr}${font DroidSans:size=8.3}${addr ${template7}}${font}
#
## Uncomment [THIS] to display your Public/WAN URL (WIFI) - via checkip.dyndns.org
${voffset 0}${font PizzaDudeBullets:size=9.5}${color6}a${font DroidSans:size=8.65}${color3}${offset 5}Public${offset 7}IP${goto 121}${font DroidSansFallback:size=8.5}WAN${font DroidSans:size=8.3}${alignr}${execi 1800 wget -q -O - checkip.dyndns.org | sed -e 's/[^[:digit:]\|.]//g'}${font}${else}
#
## Uncomment [OR THIS] to obscure your Public/WAN URL (WIFI) - for privacy, screenshots, etc
# ${voffset 0}${font PizzaDudeBullets:size=9.5}${color6}a${font DroidSans:size=8.65}${color3}${offset 5}Public${offset 7}IP${goto 121}${font DroidSansFallback:size=8.5}WAN${font DroidSans:size=8.3}${alignr}Demo Mode${font}${else}
#
## WIRED/ETHERNET SECTION ##
${if_existing /proc/net/route ${template8}}
${voffset -23}${font DroidSans:bold:size=8}${color4}WIRED NET${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font PizzaDudeBullets:size=9.5}${color6}T${voffset 1}${font DroidSansFallback:size=8.2}${color3}${offset 5}Download${goto 120}${font DroidSans:size=8.3}${totaldown ${template8}}${alignr}${font DroidSans:size=8.2}${downspeed ${template8}}${font}
${voffset -3}${font PizzaDudeBullets:size=9.5}${color6}N${voffset 1}${font DroidSansFallback:size=8.2}${color3}${offset 5}Upload${goto 120}${font DroidSans:size=8.3}${totalup ${template8}}${alignr}${font DroidSans:size=8.2}${upspeed ${template8}}${font}
${voffset 0}${font PizzaDudeBullets:size=9.5}${color6}a${voffset 1}${font DroidSansFallback:size=8.2}${color3}${offset 5}Private${offset 3}IP${goto 123}${font DroidSansFallback:size=8.3}LAN${alignr}${font DroidSans:size=8.2}${addr ${template8}}${font}
#
## Uncomment [THIS] to display your Public/WAN URL (WIRED) - via checkip.dyndns.org
# ${voffset -3}${font PizzaDudeBullets:size=9.5}${color6}a${voffset 1}${font DroidSans:size=8.2}${color3}${offset 5}Public${offset 7}IP${goto 121}${font DroidSansFallback:size=8.3}WAN${font DroidSans:size=8.3}${voffset -1}${alignr}${execi 1800 wget -q -O - checkip.dyndns.org | sed -e 's/[^[:digit:]\|.]//g'}${font}${else}
#
## Uncomment [OR THIS] to obscure your Public/WAN URL (WIRED) - for privacy, screenshots, etc
${voffset -3}${font PizzaDudeBullets:size=9.5}${color6}a${voffset 1}${font DroidSans:size=8.2}${color3}${offset 5}Public${offset 7}IP${goto 121}${font DroidSansFallback:size=8.5}WAN${font DroidSans:size=8.3}${voffset -1}${alignr}Demo Mode${font}${else}
#
## COMMON DISCONNECTED/OFFLINE SECTION ##
${voffset -22}${font DroidSans:bold:size=8}${color4}NETWORK${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 25}${goto 77}${font DroidSans:bold:size=8}NO CONNECTION${voffset 23}${font}${endif}${endif}
##################################
##      CONKYWX WEATHER         ##
##################################
${voffset 4}${font DroidSans:bold:size=8.25}${color4}CONKYWX${offset 8}${color6}${voffset -2}${hr 1}${font}
####
## Uncomment for IMPERIAL Weather Stats (DINGBAT font set).
# ${execpi 900 ${template0} -c "${template1}" -t "${template3}"}${font}
####
## Uncomment for IMPERIAL Weather Stats (GRAPHIC icon set).
${execpi 900 ${template0} -c "${template1}" -t "${template4}"}${font}
####
## Uncomment for METRIC Weather Stats (DINGBAT font set).
# ${execpi 900 ${template0} -c "${template2}" -t "${template5}"}${font}
####
## Uncomment for METRIC Weather Stats (GRAPHIC icon set).
# ${execpi 900 ${template0} -c "${template2}" -t "${template6}"}${font}
##################################
##           TIME               ##
##################################
${voffset 5}${font DroidSans:bold:size=8}${color4}TIME${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset -6}${font RadioSpace:size=32}${color3}${if_match ${time %l}<=9}${alignc 7}${time %l:%M}${offset 3}${time %p}${else}${if_match ${time %l}>=10}${alignc -1}${time %l:%M}${offset 3}${time %p}${endif}${endif}${font}
##################################
##         CALENDAR             ##
##################################
${voffset 3}${font DroidSans:bold:size=8}${color4}DATE${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 10}${font DroidSansMono:size=7.55}${color2}${alignc 60}${time %A}${font}
${voffset -4}${font DroidSansFallback:bold:size=18}${if_match ${time %e}<=9}${color3}${alignc 65}${time %e}${font}${else}${if_match ${time %e}>=10}${color3}${alignc 60}${time %e}${endif}${endif}${font}
${voffset 0}${font DroidSansMono:size=7.55}${color2}${alignc 60}${time %B}${font}
${voffset -2}${font DroidSansMono:size=7.6}${color2}${alignc 60}${time %Y}${font}
${voffset -78}${font CutOutsFor3DFX:size=67}${color6}${alignc 95}2${font}
####
## Uncomment for "SUNDAY = First Day-of-the-Week" valid Jan.2015 - Dec.2016 (use mono fonts only)
## Tweaked for proper alignment of annoying months with six calendar weeks.
${if_match "${time %b %G}"=="May 2015"}${voffset -66}${else}${if_match "${time %b %G}"=="Aug 2015"}${voffset -66}${else}${if_match "${time %b %G}"=="Jan 2016"}${voffset -66}${else}${if_match "${time %b %G}"=="Jul 2016"}${voffset -66}${else}${if_match "${time %b %G}"=="Oct 2016"}${voffset -82}${else}${voffset -60}${endif}${endif}${endif}${endif}${endif}${font DroidSansMono:size=7.55}${color3}${execpi 60 VinDSL_Cal_9=`date +%-d`; cal -h | sed -e 's/\r//g' -e 's/^/ /g' -e '1d' -e s/^/"\$\{offset 100"\}/ -e 's/\<'"$VinDSL_Cal_9"'\>/${color9}&${color3}/'}
####
## Uncomment for "MONDAY = First Day-of-the-Week" valid Jan.2015 - Dec.2016 (use mono fonts only)
## Tweaked for proper alignment of annoying months with six calendar weeks.
# ${if_match "${time %b %G}"=="Mar 2015"}${voffset -76}${else}${if_match "${time %b %G}"=="Aug 2015"}${voffset -76}${else}${if_match "${time %b %G}"=="Nov 2015"}${voffset -76}${else}${if_match "${time %b %G}"=="May 2016"}${voffset -76}${else}${if_match "${time %b %G}"=="Oct 2016"}${voffset -76}${else}${voffset -70}${endif}${endif}${endif}${endif}${endif}${font DroidSansMono:size=7.55}${color3}${execpi 60 VinDSL_Cal_9=`date +%-d`; ncal -M -C -h | sed -e 's/\r//g' -e 's/^/ /g' -e '1d' -e s/^/"\$\{offset 100"\}/ -e 's/\<'"$VinDSL_Cal_9"'\>/${color9}&${color3}/'}
##################################
##  RHYTHMBOX 1 (Experimental)  ##
##################################
# ${if_running rhythmbox}
# ${voffset -13}${font DroidSans:bold:size=8}${color4}RHYTHMBOX${offset 8}${color6}${voffset -2}${hr 1}${font}
# ${voffset 4}${font DroidSans:size=8.25}${color3}${if_match "${execpi 2 expr length "`/usr/bin/rhythmbox-client --print-playing-format %tt | head -n 1`"}" >= "48"}${alignr 15}${scroll 38 4* ${execi 2 rhythmbox-client --print-playing-format %tt --no-start}}${font}${else}${alignc}${execi 2 rhythmbox-client --print-playing-format %tt --no-start}${font}${endif}${endif}
##################################
##  RHYTHMBOX 2 (Experimental)  ##
##################################
# ${if_running rhythmbox}
# ${voffset -13}${font DroidSans:bold:size=8}${color4}RHYTHMBOX${offset 8}${color6}${voffset -2}${hr 1}${font}
# ${voffset 3}${font DroidSans:size=7.85}${color3}${if_match "${execpi 2 expr length "`qdbus org.mpris.MediaPlayer2.rhythmbox /\org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Metadata | grep title | cut -c 14-""`"}" >= "48"}${alignr 15}${scroll 38 4* ${execi 2 qdbus org.mpris.MediaPlayer2.rhythmbox /\org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Metadata | grep title | cut -c 14-""}}${font}${else}${alignc}${execi 2 qdbus org.mpris.MediaPlayer2.rhythmbox /\org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Metadata | grep title | cut -c 14-""}${font}${endif}${endif}
##################################
##    BANSHEE (Experimental)    ##
##################################
# ${if_running banshee}
# ${voffset -25}${font DroidSans:bold:size=8}${color4}BANSHEE${offset 8}${color6}${voffset -2}${hr 1}${font}
# ${voffset 3}${font DroidSans:size=7.85}${color3}${if_match "${execpi 2 expr length "`/usr/bin/banshee --query-title --no-present | cut -f1- -d" "`"}" >= "48"}${alignr 15}${scroll 38 4* ${execi 2 banshee --query-title --no-present | cut -f2- -d" "}}${font}${else}${alignc}${execi 2 banshee --query-title --no-present | cut -f2- -d" "}${font}${endif}${endif}
##################################
##   GUAYADEQUE (Experimental)  ##
##################################
${if_running guayadeque}${execpi 2 cat ~/.conky/guayadequetrack.txt}${else}${endif}
##################################
##     VLC (Experimental)       ##
##################################
${if_running vlc}${execpi 2 cat ~/.conky/vlctrack.txt}${else}${endif}
]] --end conky.text

Mod Note: Oversized images replaced with thumbnail links, please limit images to ~250x250px
-HoaS

Thx, HoaS !  Got it sorted (250x200px thumbs now).
~VinDSL

Last edited by VinDSL (2016-08-23 19:04:56)

Offline

#194 2016-08-23 06:35:26

unklar
Back to the roots 1.9
From: #! BL
Registered: 2015-10-31
Posts: 2,641

Re: Show us your conky

@VinDSL, perfect.

I love this clearly structured configuration files!  cool

Offline

#195 2016-08-23 07:43:53

Nili
Member
From: $HOME/♫♪
Registered: 2015-09-30
Posts: 1,271
Website

Re: Show us your conky

That VinDSL conky was a dream for me once smile

Tumbleweed | KDE Plasma

Offline

#196 2016-08-23 12:28:45

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,008

Re: Show us your conky

Good morning VinDSL,

Welcome to BunsenLabs.  Could spot that conky a mile away.
Coffee is down the hall.

Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#197 2016-08-23 15:50:16

VinDSL
Member
From: Peppermint OS
Registered: 2016-08-22
Posts: 16
Website

Re: Show us your conky

Thx, Sector11 and company !

Can I host my own pics, if I limit the thumbs to 250x ?

~ EXAMPLE (250x200)

VinDSL_2016-08-23_09:06:05(250x200).png


Are you down with that idea ?  smile

Last edited by VinDSL (2016-08-23 16:23:00)

Offline

#198 2016-08-23 15:58:43

WaltH
Member
Registered: 2016-08-21
Posts: 53

Re: Show us your conky

I've been working on getting my Conky working in Peppermint 7, and while I was at it decided to import my Google Calendar into it. I still need to figure out how to tweak the colors for what gcalcli pulls into Conky, but here is what I have so far:
http://imgur.com/Nli1vBG

Eventually, I would love to make the rss headlines wrap (I've been given a few things to try, but I haven't had a chance as yet) and perhaps even make the headlines clickable to open up the corresponding news story, but I think that is over my head. Anyway, here is my .conkyrc which I am sure could stand some cleanup:

conky.config = {
	alignment = 'top_right',
	background = false,
	short_units = true,
	pad_percents = 0,
	cpu_avg_samples = 1,
	net_avg_samples = 2,
	out_to_console = false,
	--#font = '8x12',
	use_xft = true,
	font = 'trebuchetms:bold:size=9',
	xftalpha = 0.1,
	override_utf8_locale = true,
	text_buffer_size = 4352,
	max_user_text = 32768,
	own_window = true,
	own_window_type = 'normal',
	own_window_argb_visual = true,
	own_window_argb_value = 255,
	own_window_transparent = true,
	own_window_class = 'conky-semi',
	own_window_colour = '355656',
	own_window_hints = 'undecorated,below,sticky,skip_taskbar,skip_pager',
	imlib_cache_size = 2,
	update_interval = 1,
	total_run_times = 0,
	double_buffer = true,
	minimum_width = 300,
	minimum_height = 1200,
	maximum_width = 350,
	draw_shades = false,
	draw_outline = false,
	draw_borders = false,
	draw_graph_borders = false,
	border_inner_margin = 5,
	out_to_x = true,
	out_to_console = false,
	out_to_ncurses = false,
	--# default_color = 'white',
	--# default_shade_color = 'white',
	--# default_outline_color = 'white',
	color1 = '370808',
	color2 = 'ffffff',
	color3 = 'b62424',
	color4 = 'ffbc6a',
	color5 = 'a18585',
	color6 = '801919',
	color7 = '660000',
	color8 = 'D43D1A',
	color9 = '2B4F81',
	stippled_borders = 0,
	gap_x = 5, --# Left/Right
	gap_y = 10, --# Top/Bottom
	top_name_width = 15,
	use_spacer = 'right',
	no_buffers = true,
	if_up_strictness = 'address',
	uppercase = false,
	temperature_unit = 'fahrenheit',
}

--## boinc (seti) dir
--## seti_dir /opt/seti

--## Possible variables to be used:
--##
--##      Variable         Arguments                  Description                
--##	acpiacadapter                     ACPI ac adapter state.                   
--##	acpifan                           ACPI fan state                           
--##	acpitemp                          ACPI temperature.                        
--##	adt746xcpu                        CPU temperature from therm_adt746x       
--##	adt746xfan                        Fan speed from therm_adt746x             
--##	battery           (num)           Remaining capasity in ACPI or APM        
--##                                    battery. ACPI battery number can be      
--##                                    given as argument (default is BAT0).     
--##	buffers                           Amount of memory buffered                
--##	cached                            Amount of memory cached                  
--##	color             (color)         Change drawing color to color            
--##	cpu                               CPU usage in percents                    
--##	cpubar            (height)        Bar that shows CPU usage, height is      
--##                                    bar's height in pixels                   
--##	downspeed         net             Download speed in kilobytes              
--##	downspeedf        net             Download speed in kilobytes with one     
--##                                    decimal                                  
--##	exec              shell command   Executes a shell command and displays    
--##                                    the output in torsmo. warning: this      
--##                                    takes a lot more resources than other    
--##                                    variables. I'd recommend coding wanted   
--##                                    behaviour in C and posting a patch :-).  
--##	execi             interval, shell Same as exec but with specific interval. 
--##                    command         Interval can't be less than              
--##                                    update_interval in configuration.        
--##	fs_bar            (height), (fs)  Bar that shows how much space is used on 
--##                                    a file system. height is the height in   
--##                                    pixels. fs is any file on that file      
--##                                    system.                                  
--##	fs_free           (fs)            Free space on a file system available    
--##                                    for users.                               
--##	fs_free_perc      (fs)            Free percentage of space on a file       
--##                                    system available for users.              
--##	fs_size           (fs)            File system size                         
--##	fs_used           (fs)            File system used space                   
--##	hr                (height)        Horizontal line, height is the height in 
--##                                    pixels                                   
--##	i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev   
--##                                    may be omitted if you have only one I2C  
--##                                    device. type is either in (or vol)       
--##                                    meaning voltage, fan meaning fan or temp 
--##                                    meaning temperature. n is number of the  
--##                                    sensor. See /sys/bus/i2c/devices/ on     
--##                                    your local computer.                     
--##  kernel                            Kernel version                           
--##  loadavg           (1), (2), (3)   System load average, 1 is for past 1     
--##                                    minute, 2 for past 5 minutes and 3 for   
--##                                    past 15 minutes.                         
--##  machine                           Machine, i686 for example                
--##  mails                             Mail count in mail spool. You can use    
--##                                    program like fetchmail to get mails from 
--##                                    some server using your favourite         
--##                                    protocol. See also new_mails.            
--##  mem                               Amount of memory in use                  
--##  membar            (height)        Bar that shows amount of memory in use   
--##  memmax                            Total amount of memory                   
--##  memperc                           Percentage of memory in use              
--##  new_mails                         Unread mail count in mail spool.         
--##  nodename                          Hostname                                 
--##  outlinecolor      (color)         Change outline color                     
--##  pre_exec          shell command   Executes a shell command one time before 
--##                                    torsmo displays anything and puts output 
--##                                    as text.                                 
--##  processes                         Total processes (sleeping and running)   
--##  running_processes                 Running processes (not sleeping),        
--##                                    requires Linux 2.6                       
--##  shadecolor        (color)         Change shading color                     
--##  stippled_hr       (space),        Stippled (dashed) horizontal line        
--##                    (height)        
--##  swapbar           (height)        Bar that shows amount of swap in use     
--##  swap                              Amount of swap in use                    
--##  swapmax                           Total amount of swap                     
--##  swapperc                          Percentage of swap in use                
--##  sysname                           System name, Linux for example           
--##  time              (format)        Local time, see man strftime to get more 
--##                                    information about format                 
--##  totaldown         net             Total download, overflows at 4 GB on     
--##                                    Linux with 32-bit arch and there doesn't 
--##                                    seem to be a way to know how many times  
--##                                    it has already done that before torsmo   
--##                                    has started.                             
--##  totalup           net             Total upload, this one too, may overflow 
--##  updates                           Number of updates (for debugging)        
--##  upspeed           net             Upload speed in kilobytes                
--##  upspeedf          net             Upload speed in kilobytes with one       
--##                                    decimal                                  
--##  uptime                            Uptime                                   
--##  uptime_short                      Uptime in a shorter format               
--##
--##  seti_prog                         Seti@home current progress
--##  seti_progbar      (height)        Seti@home current progress bar
--##  seti_credit                       Seti@hoome total user credit

--## antiX additives examples. Add below Text ##
--## Battery examples ##
--# ${color}battery: ${color}$acpiacadapter, ${battery_percent BAT1}% 
--# ${color}battery:${color} ${battery}
--# ${color}ACPI Battery: ${color}$battery
--# ${battery_bar 11,0}
--## Wireless example ##
--# ${color}Wireless:
--# ${color}essid: ${wireless_essid wlan0}
--# ${color}IP:${color} ${addr wlan0}
--# ${color}speed: ${color} ${wireless_bitrate wlan0}
--# ${color}link strength: ${color} ${wireless_link_bar 7,50 wlan0}

--## stuff after 'TEXT' will be formatted on screen

conky.text = [[
${execi 600 bash /home/walt/1a_accuweather_conkyweather_font/1a}
${image /home/walt/Walt_Wallpapers/peppermint7_logo_small_250w.png -p  0}   

${color4}${font GeosansLight:size=18}${time %I:%M %p}
${color4}${font GeosansLight:size=12}${time %A, %B %d, %Y}
${color2}${font GeosansLight:Bold:size=8}${exec disp=${DISPLAY#:}; disp=${disp%.[0-9]}; cat /home/walt/.desktop-session/desktop-code.$disp 2>/dev/null}
${color2}${execi 60 xdpyinfo | sed -n -r "s/^\s*dimensions:.*\s([0-9]+x[0-9]+).*/\1/p"}
${color2}$kernel
${color2}Uptime: $uptime

${image /home/walt/1a_accuweather_conkyweather_font/Weather-Sun-icon2.png -p 0, 166}
${color1}${font Cantarell:Bold:size=11}         Boise Weather ${hr 2}

${color2}${font conkyweather:Bold:size=24}${offset 10}${execi 600  sed -n '2p' /home/walt/1a_accuweather_conkyweather_font/curr_cond}${color4}${font Cantarell:Bold:size=9}${goto 75}${voffset -27}CURRENTLY: ${execpi 600 sed -n '4p' /home/walt/1a_accuweather_conkyweather_font/curr_cond}° F
${goto 75}${execpi 600 sed -n '3p' /home/walt/1a_accuweather_conkyweather_font/curr_cond|fold -w30}

${color2}${font conkyweather:Bold:size=24}${offset 10}${execi 600  sed -n '2p' /home/walt/1a_accuweather_conkyweather_font/tod_ton}${color4}${font Cantarell:Bold:size=9}${goto 75}${voffset -27}${execpi 600 sed -n '1p' /home/walt/1a_accuweather_conkyweather_font/tod_ton}: ${execpi 600 sed -n '4p' /home/walt/1a_accuweather_conkyweather_font/tod_ton}/${execpi 600 sed -n '5p' /home/walt/1a_accuweather_conkyweather_font/tod_ton}° F
${goto 75}${execpi 600 sed -n '3p' /home/walt/1a_accuweather_conkyweather_font/tod_ton|fold -w30}

${color2}${font conkyweather:Bold:size=24}${offset 10}${execi 600  sed -n '7p' /home/walt/1a_accuweather_conkyweather_font/tod_ton}${color4}${font Cantarell:Bold:size=9}${goto 75}${voffset -27}${execpi 600 sed -n '6p' /home/walt/1a_accuweather_conkyweather_font/tod_ton}: ${execpi 600 sed -n '9p' $HOME/1a_accuweather_conkyweather_font/tod_ton}/${execpi 600 sed -n '10p' /home/walt/1a_accuweather_conkyweather_font/tod_ton}° F
${goto 75}${execpi 600 sed -n '8p' /home/walt/1a_accuweather_conkyweather_font/tod_ton|fold -w30}

${color2}${font conkyweather:Bold:size=24}${offset 10}${execi 600  sed -n '12p' /home/walt/1a_accuweather_conkyweather_font/tod_ton}${color4}${font Cantarell:Bold:size=9}${goto 75}${voffset -27}${execpi 600 sed -n '11p' $HOME/1a_accuweather_conkyweather_font/tod_ton}: ${execpi 600 sed -n '14p' $HOME/1a_accuweather_conkyweather_font/tod_ton}/${execpi 600 sed -n '15p' $HOME/1a_accuweather_conkyweather_font/tod_ton}° F
${goto 75}${execpi 600 sed -n '13p' $HOME/1a_accuweather_conkyweather_font/tod_ton|fold -w30}

${image /home/walt/1a_accuweather_conkyweather_font/computer-skills-icon.png -p 0,365}${color1}${font Cantarell:Bold:size=11}         System ${hr 2}

${color1}${font Cantarell:Bold:size=10}CPU:${alignr}${color2}${font Cantarell:Bold:size=10}${offset -10}${cpu}${color2}%       ${color1}${font Cantarell:Bold:size=10}CPU Temp:${alignr}${color2}${font Cantarell:Bold:size=10}${offset -10}${hwmon 1 temp 1}°F
${color1}${font Cantarell:Bold:size=10}Freq:${alignr}${color2}${font Cantarell:Bold:size=10}${alignr}${offset -15}${freq_g}  ${color}${alignr}${offset -10}${cpubar cpu0 15, 160 5599cc 5599cc}
${color1}${font Cantarell:Bold:size=10}Disk:${alignr}${color2}${font Cantarell:Bold:size=10}${alignr}${offset -12}${diskio}  ${color}${alignr}${offset -10}${diskiograph 15,160 5599cc 5599cc}
## ${if_up eth0}${color}eth0 up: $alignr${color2} ${upspeed eth0}
## ${color}$alignr${upspeedgraph   eth0 20,170 5599cc 5599cc}
## ${color}eth0 down: $alignr${color2} ${downspeed eth0}
## ${color2}$alignr${downspeedgraph eth0 20,170  5599cc 5599cc}${endif}

${color1}${font Cantarell:Bold:size=10}${wireless_essid wlp3s0}$alignr${color2}${font Cantarell:Bold:size=10}${offset -10}${wireless_link_qual_perc wlp3s0}%
${color1}${font Cantarell:Bold:size=10}wlp3s0 up: $alignr${color2}${font Cantarell:Bold:size=10}${offset -10}${upspeed wlp3s0}    ${color1}${font Cantarell:Bold:size=10}wlp3s0 down: $alignr${color2}${font Cantarell:Bold:size=10}${offset -10}${downspeed wlp3s0}
${color}${color1}${font Cantarell:Bold:size=10}${voffset 10}${offset 50}Used / Total${alignr}${offset -5}Used / Total 
${color1}${voffset 2}RAM:${offset 20}${color2}$mem${color2}/${color2}$memmax${color1}${alignr}${offset -20}SWAP:  ${offset 10}${color2}$swap${color2}/${color2}$swapmax
${color1}DISK:${offset 20}${color2}${fs_used /}${color2}/${color2}${fs_size /}${color1}${alignr}${offset -20}HOME:${offset 15}${color2}${fs_used /home}${color2}/${color2}${fs_size /home}

${image /home/walt/1a_accuweather_conkyweather_font/bbc.png -p 0,588}${color1}${font Cantarell:Bold:size=11}         Headlines ${hr 2}
${color1}${font Cantarell:Bold:size=9}${voffset 10}${rss http://newsrss.bbc.co.uk/rss/newsonline_uk_edition/world/rss.xml 2 item_titles 5}

${image /usr/share/icons/Peppermix-7/32x32/apps/calendar.png -p 0,716}${color1}${font Cantarell:Bold:size=11}         Calendar ${hr 2}
${voffset -10}${color4}${font Cantarell:Bold:size=9}${execpi 300 gcalcli --conky agenda}
]];

I may eventually play with using some different colors (or a different background) so I can go back to having a transparent Conky, but this is what I have for now. Certainly not as fancy as some of the efforts I've seen here and on the old CrunchBang forums.

Offline

#199 2016-08-23 16:34:13

VinDSL
Member
From: Peppermint OS
Registered: 2016-08-22
Posts: 16
Website

Re: Show us your conky

unklar wrote:

@VinDSL, perfect.

I love this clearly structured configuration files!  cool

Thx, unklar !

I picked up that habit, because I don't like to write docs & mans.  wink

Offline

#200 2016-08-23 16:36:10

VinDSL
Member
From: Peppermint OS
Registered: 2016-08-22
Posts: 16
Website

Re: Show us your conky

Nili wrote:

That VinDSL conky was a dream for me once smile

Still alive and kickin' six years later.

Who would have thought ?!?!?  smile

Offline

Pages: 1 … 8 9 10 11 12 … 120

  1. Index
  2. » Scripts, Tutorials & Tips
  3. » Show us your conky

Board footer

Powered by FluxBB