[SOLVED] Video problem, Intel

Davixs · 2016-11-07 21:51:58

The SOLUTION to the problem is detailed in the second page at the bottom, nevertheless if it is not you're specific problem you may find interesting info here to point you in the correct direction

Hello! I know you guys have a lot in mind so I'll try to organize my ideas as better as I can wilst putting as much info in order to help others with the same problem o similar smile

____________________________________________
Video lag

Problem description:

I have a problem with the video in my bunsen-labs.
In the web browsers (firefox and pale moon) the video repoduces itself
with lagg (it jumps from one image to the other) when it is full size or
any other size that is not tiny, this ocurrs in youtube
and in any online streaming platform.
On the laptop itself VCL and totem open for a second only and gnome mplayer plays
the video but in a 5th of its size.

_____________________________________________

My computer
Information: I'll try to put as much as I now how.

Model:
Dell inspiron 3162

Video card and drivers:
lspci -k|grep -iA2 vga

00:02.0 VGA compatible controller: Intel Corporation Device 22b1 (rev 21)
Subsystem: Dell Device 0725
00:0b.0 Signal processing controller: Intel Corporation Device 22dc (rev 21)

__________________

WEB

--------->I thought that maybe it was flashplugin nonfree plugin so
I decided to try with pepperflash. SPOILER: Didnt work out.
(This link was my inspiration, i'll talk about it later though:
https://forums.bunsenlabs.org/viewtopic.php?id=532)

Install pepperflash and make it work. It didnt work in Pale moon
and looks like a very very big hassle to make it work. It didnt solve
the lagg or the video player problem.

Links of what i tried or partially tried:
https://forums.bunsenlabs.org/viewtopic.php?id=954
https://forums.bunsenlabs.org/viewtopic.php?id=1889
https://forums.bunsenlabs.org/viewtopic.php?id=2901
https://github.com/i-rinat/freshplayerp … -issues.md
https://forums.bunsenlabs.org/viewtopic … 451#p35451
https://forum.palemoon.org/viewtopic.php?t=8260

This link gave me the idea of forgetting the terminal and uninstalling
through sinaptic. So now flash in palemoon works (only that it works laggy)
https://forum.palemoon.org/viewtopic.php?t=7221

So after a lot of fighting against pepperflash, I manage to completely
uninstall it (like really a very big hassle)

-------------> Installing abobe from source:

Links:
https://forums.bunsenlabs.org/viewtopic.php?id=532

Procedure:
I followed: #2 2015-11-04 07:34:46 (I dont put it here
so as to not creat too much clutter)

Conclusion:
Somehow it didnt work, maybe I had to do something
that is obvious for someone that knows...
Perhaps this is the solution, nevertheless would that solve the other
video problems?

______________________________________

Other video problems

Video players outside the web browser dont work either. Totem and VCL opens for
a second. Gnome mplayer reproduces de video but in a small fraction of its size.
It's not laggy though. Skype works well though.

____________________________________

My theories:

----------->Could it be a problem with the grafics card drivers?
I can recall having to install propietary drivers for debian.
Nevertheless, I cant remember if it worked after installing them...
Moreover, if I attempt to install privative grafics card driver would that affect
the preformace of bunsen-labs?

----------> Install adobe flash from source correctly

______________________________________

Concluding:

What should i do? Im a bit lost. Should I try to install other
grafics drivers, if so, could someone point me in the right direction?

PD: I'm putting all these links because it helps me when I have a problem to
look into as much info as i can smile Im fidling arround with the editor I promise by tomorrow
this introduction will look much nicer smile

Last edited by Davixs (2016-11-12 21:36:19)

Horizon_Brave · 2016-11-07 22:43:18

Hi there!
It may help to do the lspci -knn command again, but show us the line that says "Kernel Driver in Use: "
In using the '2' in that command, you loose that line often times.
From my limited experience, this very well could be a driver issue. While I can agree that Flash and Pepperflash alike are a drag on older systems, that wouldn't affect your VLC player, which doesn't use Flash.

So if both are affected it's most likely your graphics card driver. Post the driver that you're using and it may be easier to dig into this.

stevep · 2016-11-07 23:02:34

I bet it's a newer Intel graphics chipset that's not fully supported by the stock kernel and Intel driver, but can be made to work by installing those and upgrading to Mesa 12.0.3, all from jessie-backports.

I also bet you can get a better idea of the current graphics situation by updating the PCI ID database as sysadmin:

update-pciids

, then installing inxi and posting the result of

inxi -Gx

if you see gallium and llvm in that output, that's not good.

With more and more new Intel hardware, this will only become more common.

Davixs · 2016-11-08 18:32:07

Hello!
Thanks for the responses.

____________________________________________________________________________________________
------------>The output to: lspci -knn

00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 21)
	Subsystem: Dell Device [1028:0725]
	Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21)
	Subsystem: Dell Device [1028:0725]
00:0b.0 Signal processing controller [1180]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller [8086:22dc] (rev 21)
	Subsystem: Dell Device [1028:0725]
00:13.0 SATA controller [0106]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller [8086:22a3] (rev 21)
	Subsystem: Dell Device [1028:0725]
	Kernel driver in use: ahci
00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5] (rev 21)
	Subsystem: Dell Device [1028:0725]
	Kernel driver in use: xhci_hcd
00:1a.0 Encryption controller [1080]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2298] (rev 21)
	Subsystem: Dell Device [1028:0725]
00:1b.0 Audio device [0403]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller [8086:2284] (rev 21)
	Subsystem: Dell Device [1028:0725]
	Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 [8086:22c8] (rev 21)
	Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 21)
	Subsystem: Dell Device [1028:0725]
00:1f.3 SMBus [0c05]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller [8086:2292] (rev 21)
	Subsystem: Dell Device [1028:0725]
01:00.0 Network controller [0280]: Intel Corporation Wireless 3160 [8086:08b3] (rev 83)
	Subsystem: Intel Corporation Dual Band Wireless AC 3160 [8086:8470]
	Kernel driver in use: iwlwifi

____________________________________________________________________________________________

It is a relatively new computer, nevertheless, i read it is one of the aproved laptops
to come with preinstalled Ubuntu 14.4 so im

____________________________________________________________________________________________

-------------->update-pciids
Downloaded daily snapshot dated 2016-10-29 03:15:01
It is a huge litelrally huge file, what exactly should I look for in that file?

-------------->inxi -Gx

Graphics:  Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: X.Org 1.16.4 drivers: fbdev,vesa,intel
           Resolution: 1368x768@0.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits)
           GLX Version: 3.0 Mesa 10.3.2 Direct Rendering: Yes

___________________________________________________________________________________________
Looks like both Gallium and llvpipe are there.... So, i supose I have to do what "Stevep" said of:
<<but can be made to work by installing those and upgrading to Mesa 12.0.3, all from jessie-backports.>>

Do i supose right? If so... I have no idea of what all that means, how do I upgrade it? smile :)

Do you need any other info?

Lots, hundreds, millions of thanks!!!

---Mod Edit: added [ code ] tags ---

Last edited by damo (2016-11-08 19:31:02)

stevep · 2016-11-08 19:25:00

Updating the PCI ID database hopefully will result in better output for newer hardware in commands such as lspci and inxi, such as a description in words rather than numbers. Somewhere on these forums are instructions for upgrading to the backports kernel and their xserver-xorg-video-intel driver, but what we really need for beginners is a script that adds the backport repository and installs the kernel, driver, and Mesa update all in one swell foop. I help with the Jessie-based MX Linux development, and for the 64-bit version of MX 16 we went ahead and had all those pre-installed to work around that--I don't know if BL may consider that, since this issue is just going to get worse.

damo · 2016-11-08 19:34:28

Davixs wrote:

-------------->update-pciids
Downloaded daily snapshot dated 2016-10-29 03:15:01
It is a huge litelrally huge file, what exactly should I look for in that file?

You don't need to look for anything in it. It is the database of ID's used by various utilities.

PCI ID Repository wrote:

This is a public repository of all known ID's used in PCI devices: ID's of vendors, devices, subsystems and device classes. It is used in various programs (e.g., The PCI Utilities) to display full human-readable names instead of cryptic numeric codes

PS Would you use [ code ] tags for terminal output - it makes it much easier to read and scroll through wink

Last edited by damo (2016-11-08 19:35:58)

Davixs · 2016-11-08 19:54:25

Hello again.

So let me get my ideas staright, what I need to do is:

1. Upgrade to backports Kernel
2. Install: xserver-xorg-video-intel driver
3. Find out what is MESA and install it/update is

___________________________________________________
1- So, i add the jessi-backports repository and look for a comand to install it no?
2- I suppose i have to find the xorg-video-intel driver that works with my specific card no? or is there a generic one?

I'll look into it and post back results/questions. smile

Thanks a lot!!

damo · 2016-11-08 20:12:28

^HowTo here: Broadwell and beyond in BunsenLabs

Head_on_a_Stick · 2016-11-08 22:18:00

stevep wrote:

I don't know if BL may consider that, since this issue is just going to get worse.

Speaking personally, I would prefer to continue to direct users to the extant HowTos and other relevant documentation.

In my opinion, BunsenLabs should avoid too much hand-holding and should instead encourage the user to get their hands dirty and implement fixes themselves.

stevep · 2016-11-08 22:57:53

OK, if the OP needs to upgrade to the mesa 12.0.3 in jessie-backports, is there some apt-get command that'll upgrade all installed *mesa* packages to the "-t jessie-backports" version? When I did it, I just used Synaptic and upgraded all the mesa packages I could see listed as upgradeable, after setting it to prefer jessie-backports temporarily. I don't think there's any metapackage that'll make it easier.

Head_on_a_Stick · 2016-11-08 23:05:13

stevep wrote:

OK, if the OP needs to upgrade to the mesa 12.0.3 in jessie-backports, is there some apt-get command that'll upgrade all installed *mesa* packages to the "-t jessie-backports" version?

Good point.

I have just used libegl1-mesa in the current guide, I will have to update it.

Do you happen to have a list of all of the required Mesa packages?

Davixs · 2016-11-09 01:00:08

Hello!

So I'm following the:
^HowTo here: Broadwell and beyond in BunsenLabs
That damo suggested while the mesa packages debate is open.

------->So I have to install the grafics driver (xorg...) and update the mesa packages that are available in the jessi-backports repository? Is that all?
(Sorry for been such a pain repeating everything, but my experience is that i always missread something and end up crashing something...jeje)

--------->Also, in the line quoted beneth that is found in the Howto it says amd64... My bunsenlabs is 32 bits... Would that be compatible with amd64 or am I just been a noob?

sudo apt-get install --target-release jessie-backports [b]linux-image-amd64[/b] xserver-xorg-video-intel libegl1-mesa

Lost of thanks!

ohnonot · 2016-11-09 06:29:59

good that you repeat everything in so much detail!

i'm pretty sure that a 64bit version of linux is a MUST on such a new netbook. so -
step1: reinstall bunsenlabs, 64bit this time (aka x86_64).
step2: backport to a newer kernel. the newest that can be made to work with debian stable.
step3: REBOOT

if you still have problems after that, do the things you outlined in your previous post.

Last edited by ohnonot (2016-11-09 06:30:52)

Head_on_a_Stick · 2016-11-09 07:21:08

ohnonot wrote:

reinstall bunsenlabs, 64bit this time

+1

If you have a 64-bit machine then you should run a 64-bit operating system.

Davixs · 2016-11-09 17:06:53

Thanks a lot!
It was like really dificult to get to make a usb live with bunsenlabs that actually worked i almost gave up... So I'll probably wait till the weekend to reinstall bunsen 64 (I have to work with the computer, cant afford to mess up the instalation in mid week)

So, when you say backport to a newer kernel you are refering to the guide: Broadweel and Beyond?

To Do list wrote:

1/Reinstall Bunsenlabs x64----------------------------------------->Got it
2/Install xserver-xorg intel driver as shown in the guide---------->Confirmation?
3/Install libegl1-mesa as shown(Any other mesa package?)----------->Confirmation?
4/Upgrade to backports kernel--------------------------------------> No idea

ohnonot wrote:

step2: backport to a newer kernel. the newest that can be made to work with debian stable.

¿Backport to a new kernel?

Last edited by Davixs (2016-11-09 17:08:58)

stevep · 2016-11-09 20:05:25

I can't see why a 32-bit version can't use the newer kernel, firmware, etc., from jessie-backports to get the video working right. 64-bit will usually be faster for some operations on modern hardware, at the cost of using a bit more RAM. It also introduces the complications of having to install extra :i386 Mesa packages alongside the 64-bit ones it you want to run something like Steam games or 32-bit wine.

Backporting is actually done by who or whatever rebuilt the package on a Jessie platform. You will be installing backported packages, not actually backporting them yourself.

Follow the guide to install the backported kernel and xserver-xorg-video-intel driver; hold off on any other upgrades, and reboot, then run "inxi -Gx" again. If that got rid of the gallium and llvmpipe stuff, good. If you have really new Intel hardware such as Skylake, you'll need to upgrade Mesa from jessie-backports.

I have a lot of mesa-related packages installed myself, but most probably depend on some core ones, and some are related to my Bumblebee setup or the va-api acceleration drivers, not important right now. I think the important ones are going to be that libegl1-mesa, maybe libgl1-mesa-glx and libgl1-mesa-dri.

Last edited by stevep (2016-11-10 02:43:32)

ohnonot · 2016-11-09 21:11:15

sorry about my sloppy verbiage, i meant: install a newer kernel using jessie backports, and make your system use it.
please search the forums on how to do that.
and i'm pretty sure that that should be the first step, followed by a reboot.

Davixs · 2016-11-10 18:22:51

Hello there,

32bits
First of all my explanation/excuse for installing 32 bits. I installed ubuntu 14.4 LTS 64 bits and the computer overheated and switched off after a while, even with the xorg drivers installed. Anyway with 32 bits on bl! my cpu sometimes run very high, it goes smooth on the ram (most of the times anyways), but I have only 2 gb of ram so I thought 64 bits was going to be to much.

__________________________________________________________________________
Kernel, backports and other nightmares

I followed two links:

1/Kernel upgrade to backports:
How to install a newer kernel version in BunsenLabs

sudo apt-get install -t jessie-backports linux-image-amd64 linux-base

2/ Video drivers and mesa:
Broadwell and beyond
(Except for the editing the grub line)

sudo apt-get install --target-release jessie-backports linux-image-amd64 xserver-xorg-video-intel libegl1-mesa libgl1-mesa-glx libgl1-mesa-dri

sudo apt-get install --target-release jessie-backports firmware-misc-nonfree

__________________________________________________________________________

To Do list wrote:

1/ Install xserver-xorg intel driver---------------> Done
2/ Install libegl1-mesa libgl1-mesa-glx libgl1-mesa-dri--------->Done
3/ Upgrade to backports kernel----------------->Done

__________________________________________________________________________

Conclusion

Good

1/Online video, youtube and such-------------> Works without lag! Hurray!!

Not so Good

2/ Video on the actual laptop----------------> It works on every platform, but on gnome mplayer it is still tiny and on the other platforms (totem, vlc...) It has a lot of lag.
3/It doesnt start with this kernel by default I have to enter the grub settings.

______________________________________________________________________________

Inxi -Gx

Graphics:  Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: X.Org 1.16.4 drivers: fbdev,vesa,intel
           Resolution: 1368x768@0.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 128 bits)
           GLX Version: 3.0 Mesa 12.0.3 Direct Rendering: Yes

So Gallium, llvmpipe and mesa have all been updated.

Before wrote:

GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits)
GLX Version: 3.0 Mesa 10.3.2 Direct Rendering: Yes

_____________________________________________________________________

So,the video on the actual laptop players doenst work right. Is there something wrong that I have done?
Thanks for your help and pacience!!!

Head_on_a_Stick · 2016-11-10 21:56:21

Davixs wrote:

           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 128 bits)

I am unfamiliar with the output of `inxi` but I don't think that's right.

I have a supported Intel chipset on this machine and it shows:

           GLX Renderer: Mesa DRI Intel Ironlake Mobile

To be absolutely sure, can we see the output of:

lspci -knn | grep -iA2 vga
cat /proc/version

To change the default GRUB menu entry, edit /etc/default/grub and change the GRUB_DEFAULT line then save the file and run `grub-mkconfig -o /boot/grub/grub.cfg` as root.

See https://www.gnu.org/software/grub/manua … figuration for more on this.

stevep · 2016-11-11 01:10:10

Ubuntu 14.0.4 ran hot because it didn't support your newer hardware either. 64-bit takes a bit more RAM, but not a huge amount. You could try the MX 16 64-bit beta Live Session for a Jessie-based + backports ISO that already has everything updated on it to see how it works with your card and how much RAM it's using. It works with my Skylake 520 out of the box. If that works fine, it's just a matter of figuring out which magic package needs to be updated from jessie-backports on BL for you to have a fully functional driver, though you're pretty close already.

Gallium and llvmpipe are still signs that something is still not right. For example, my Intel graphics went from that to

Graphics:  Card-1: Intel HD Graphics 520 bus-ID: 00:02.0
           Card-2: NVIDIA Device 179c bus-ID: 01:00.0
           Display Server: X.Org 1.16.4 driver: intel Resolution: 1920x1080@60.01hz
           GLX Renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2)
           GLX Version: 3.0 Mesa 12.0.3 Direct Rendering: Yes

Also, it seems that these new Intel graphics work better with video players using the openGL output instead of the xv that mplayer defaults to; I have the same fixed video size problem using the xv output even with a fully functional driver. In gnome-mplayer, the setting for the video output is in Preferences/General; try gl2 or the lowest common denominator, x11.

What's the output of

apt-cache policy libegl1-mesa libgl1-mesa-glx libgl1-mesa-dri

Last edited by stevep (2016-11-11 01:10:43)

johnraff · 2016-11-11 02:34:42

Sorry, a bit off-topic perhaps:

stevep wrote:

is there some apt-get command that'll upgrade all installed *mesa* packages to the "-t jessie-backports" version?

Wouldn't 'sudo apt-get install -t jessie-backports thispackage thatpackage...' do it?

...or do you mean some regex filter for all the packages with *mesa* in their names?

EDIT: quick test shows it may not be simple:

john@bunsen1:~$ apt-get install -s -t jessie-backports '.*mesa.*'
NOTE: This is only a simulation!
      apt-get needs root privileges for real execution.
      Keep also in mind that locking is deactivated,
      so don't depend on the relevance to the real current situation!
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Note, selecting 'xlibmesa3' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-dev' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-swx11-dbg' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-glx-dbg' for regex '.*mesa.*'
Note, selecting 'libglu1-mesa-dev' for regex '.*mesa.*'
Note, selecting 'mesa-utils-extra' for regex '.*mesa.*'
Note, selecting 'libegl1-mesa' for regex '.*mesa.*'
Note, selecting 'mesag-dev' for regex '.*mesa.*'
Note, selecting 'xlibmesa-dev' for regex '.*mesa.*'
Note, selecting 'libopenvg1-mesa' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-swx11-dev' for regex '.*mesa.*'
Note, selecting 'libosmesa6-dev' for regex '.*mesa.*'
Note, selecting 'libwayland-egl1-mesa-dbg' for regex '.*mesa.*'
Note, selecting 'mesa-utils' for regex '.*mesa.*'
Note, selecting 'libegl1-mesa-dbg' for regex '.*mesa.*'
Note, selecting 'libglw1-mesa' for regex '.*mesa.*'
Note, selecting 'libegl1-mesa-drivers' for regex '.*mesa.*'
Note, selecting 'mesa-test-tools' for regex '.*mesa.*'
Note, selecting 'mesag3-glide2' for regex '.*mesa.*'
Note, selecting 'libegl1-mesa-dev' for regex '.*mesa.*'
Note, selecting 'libglapi-mesa-dbg' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-dri' for regex '.*mesa.*'
Note, selecting 'xlibmesa3-gl' for regex '.*mesa.*'
Note, selecting 'libgles1-mesa-dbg' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-dri-experimental-dbg' for regex '.*mesa.*'
Note, selecting 'xlibmesa-dri' for regex '.*mesa.*'
Note, selecting 'glx-alternative-mesa' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-glide3' for regex '.*mesa.*'
Note, selecting 'libosmesa-dev' for regex '.*mesa.*'
Note, selecting 'mesa-vulkan-drivers' for regex '.*mesa.*'
Note, selecting 'libgles1-mesa-dev' for regex '.*mesa.*'
Note, selecting 'libglapi-mesa' for regex '.*mesa.*'
Note, selecting 'mesag3+ggi' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-dri-experimental' for regex '.*mesa.*'
Note, selecting 'mesa-vdpau-drivers' for regex '.*mesa.*'
Note, selecting 'mesa-va-drivers' for regex '.*mesa.*'
Note, selecting 'xlibmesa-gl-dev' for regex '.*mesa.*'
Note, selecting 'mesa-opencl-icd-dbg' for regex '.*mesa.*'
Note, selecting 'mesag3-widgets' for regex '.*mesa.*'
Note, selecting 'libgles2-mesa' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-glx' for regex '.*mesa.*'
Note, selecting 'mesag-widgets-dev' for regex '.*mesa.*'
Note, selecting 'xlibosmesa-dev' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-dri-dbg' for regex '.*mesa.*'
Note, selecting 'libopenvg1-mesa-dbg' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-swx11' for regex '.*mesa.*'
Note, selecting 'libgles1-mesa' for regex '.*mesa.*'
Note, selecting 'mesag3-glide' for regex '.*mesa.*'
Note, selecting 'libosmesa6' for regex '.*mesa.*'
Note, selecting 'mesa-vdpau-drivers-dbg' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-dri-dev' for regex '.*mesa.*'
Note, selecting 'libwayland-egl1-mesa' for regex '.*mesa.*'
Note, selecting 'libopenvg1-mesa-dev' for regex '.*mesa.*'
Note, selecting 'mesa-glide2-dev' for regex '.*mesa.*'
Note, selecting 'libosmesa4-dev' for regex '.*mesa.*'
Note, selecting 'mesa-opencl-icd' for regex '.*mesa.*'
Note, selecting 'mesag3+ggi-dev' for regex '.*mesa.*'
Note, selecting 'libgles2-mesa-dbg' for regex '.*mesa.*'
Note, selecting 'mesa-common-dev' for regex '.*mesa.*'
Note, selecting 'libglw1-mesa-dev' for regex '.*mesa.*'
Note, selecting 'libgles2-mesa-dev' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-glx-no-multiarch' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-swrast' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-swrast-dbg' for regex '.*mesa.*'
Note, selecting 'mesa-dev' for regex '.*mesa.*'
Note, selecting 'mesag3' for regex '.*mesa.*'
Note, selecting 'libegl1-mesa-drivers-dbg' for regex '.*mesa.*'
Note, selecting 'libglu1-mesa' for regex '.*mesa.*'
Note, selecting 'xlibmesa-glu-dev' for regex '.*mesa.*'
Note, selecting 'libgl1-mesa-swrast-dev' for regex '.*mesa.*'
Note, selecting 'libglw1-mesa-dev' instead of 'mesag-widgets-dev'
Note, selecting 'libglw1-mesa-dev' instead of 'mesag3-widgets'
Note, selecting 'libglu1-mesa-dev' instead of 'xlibmesa-glu-dev'
Note, selecting 'libgl1-mesa-swx11' instead of 'mesag3'
Note, selecting 'libgl1-mesa-swx11-dev' instead of 'mesag-dev'
Note, selecting 'libgl1-mesa-swx11' instead of 'libgl1-mesa-swrast'
Note, selecting 'libgl1-mesa-swx11-dbg' instead of 'libgl1-mesa-swrast-dbg'
Note, selecting 'libgl1-mesa-swx11-dev' instead of 'libgl1-mesa-swrast-dev'
Note, selecting 'libosmesa6-dev' instead of 'libosmesa-dev'
libglu1-mesa is already the newest version.
libglu1-mesa set to manually installed.
libopenvg1-mesa is already the newest version.
libopenvg1-mesa set to manually installed.
mesa-utils is already the newest version.
mesa-utils set to manually installed.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 glx-alternative-mesa : Depends: update-glx (= 0.7.3~bpo8+1)
                        Depends: glx-diversions (= 0.7.3~bpo8+1)
 libegl1-mesa-dbg : Depends: libegl1-mesa (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
 libegl1-mesa-drivers-dbg : Depends: libegl1-mesa-drivers (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
 libgl1-mesa-dev : Conflicts: libgl-dev
 libgl1-mesa-dri-dbg : Depends: libgl1-mesa-dri (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
 libgl1-mesa-glx : Conflicts: libgl1
 libgl1-mesa-glx-dbg : Depends: libgl1-mesa-glx (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
 libgl1-mesa-swx11 : Conflicts: libgl1
 libgl1-mesa-swx11-dev : Depends: mesa-common-dev (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
                         Conflicts: libgl-dev
 libglapi-mesa-dbg : Depends: libglapi-mesa (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
 libgles1-mesa-dbg : Depends: libgles1-mesa (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
 libgles2-mesa-dbg : Depends: libgles2-mesa (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
 libwayland-egl1-mesa-dbg : Depends: libwayland-egl1-mesa (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
 mesa-opencl-icd-dbg : Depends: mesa-opencl-icd (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
 mesa-vdpau-drivers-dbg : Depends: mesa-vdpau-drivers (= 10.3.2-1+deb8u1) but 12.0.3-1~bpo8+1 is to be installed
E: Unable to correct problems, you have held broken packages.

Last edited by johnraff (2016-11-11 02:45:18)

Davixs · 2016-11-11 05:03:01

Hello Again!!

lspci -knn | grep -iA2 vga wrote:

00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium 
Processor x5-E8000/J3xxx/N3xxx 
Integrated Graphics Controller [8086:22b1] (rev 21)
	Subsystem: Dell Device [1028:0725]
00:0b.0 Signal processing controller [1180]: Intel Corporation Atom/Celeron/Pentium 
Processor x5-E8000/J3xxx/N3xxx Series 
Power Management Controller [8086:22dc] (rev 21)

cat /proc/version wrote:

Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org)
(gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19)

apt-cache policy libegl1-mesa libgl1-mesa-glx libgl1-mesa-dri wrote:

libegl1-mesa:
  Instalados: 12.0.3-1~bpo8+1
  Candidato:  12.0.3-1~bpo8+1
  Tabla de versión:
 *** 12.0.3-1~bpo8+1 0
        100 http://httpredir.debian.org/debian/ jessie-backports/main i386 Packages
        100 /var/lib/dpkg/status
     10.3.2-1+deb8u1 0
        500 http://httpredir.debian.org/debian/ jessie/main i386 Packages
libgl1-mesa-glx:
  Instalados: 12.0.3-1~bpo8+1
  Candidato:  12.0.3-1~bpo8+1
  Tabla de versión:
 *** 12.0.3-1~bpo8+1 0
        100 http://httpredir.debian.org/debian/ jessie-backports/main i386 Packages
        100 /var/lib/dpkg/status
     10.3.2-1+deb8u1 0
        500 http://httpredir.debian.org/debian/ jessie/main i386 Packages
libgl1-mesa-dri:
  Instalados: 12.0.3-1~bpo8+1
  Candidato:  12.0.3-1~bpo8+1
  Tabla de versión:
 *** 12.0.3-1~bpo8+1 0
        100 http://httpredir.debian.org/debian/ jessie-backports/main i386 Packages
        100 /var/lib/dpkg/status
     10.3.2-1+deb8u1 0
        500 http://httpredir.debian.org/debian/ jessie/main i386 Packages

Here are the outputs smile :):)

Last edited by Davixs (2016-11-11 05:11:08)

Head_on_a_Stick · 2016-11-11 07:29:43

Davixs wrote:

cat /proc/version wrote:

Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org)
(gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19)

You are still using the stock jessie kernel, have you installed the newer kernel from the jessie-backports repository?

sudo apt install -t jessie-backports linux-image-amd64

If you already have that package installed then you need to select that kernel from the GRUB menu.

Are you multibooting?

Is BunsenLabs defining the bootloader configuration?

If not, update the bootloader from the operating system in control of the boot process.

Davixs · 2016-11-11 17:30:02

Hello

1/

Head_on_a_Stick wrote:

You are still using the stock jessie kernel, have you installed the newer kernel from the jessie-backports repository?
 sudo apt install -t jessie-backports linux-image-amd64 

Yes, I installed the new kernel. To make shure I tried that same comand again and it said it was already installed.

2/Also I specifically selected the new kernel on the grub menu.

3/I'm not multibooting.

4/BunsenLabs is the defining operating system in control

Old Kernel: cat /proc/version wrote:

Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19)

It only gives me those two options... Giving the old kernel a try it seems everithing works the same as if I selected the newer one. I mean there are the same video errors.

Head_on_a_Stick · 2016-11-11 19:11:26

Davixs wrote:

Yes, I installed the new kernel. To make shure I tried that same comand again and it said it was already installed.
2/Also I specifically selected the new kernel on the grub menu.

That is quite bizarre hmm

What does the GRUB menu entry say?

grep menuentry /boot/grub/grub.cfg

Please also post the output of:

ls /boot
ls -l /
cat /proc/cmdline

#1 2016-11-07 21:51:58

[SOLVED] Video problem, Intel

#2 2016-11-07 22:43:18

Re: [SOLVED] Video problem, Intel

#3 2016-11-07 23:02:34

Re: [SOLVED] Video problem, Intel

#4 2016-11-08 18:32:07

Re: [SOLVED] Video problem, Intel

#5 2016-11-08 19:25:00

Re: [SOLVED] Video problem, Intel

#6 2016-11-08 19:34:28

Re: [SOLVED] Video problem, Intel

#7 2016-11-08 19:54:25

Re: [SOLVED] Video problem, Intel

#8 2016-11-08 20:12:28

Re: [SOLVED] Video problem, Intel

#9 2016-11-08 22:18:00

Re: [SOLVED] Video problem, Intel

#10 2016-11-08 22:57:53

Re: [SOLVED] Video problem, Intel

#11 2016-11-08 23:05:13

Re: [SOLVED] Video problem, Intel

#12 2016-11-09 01:00:08

Re: [SOLVED] Video problem, Intel

#13 2016-11-09 06:29:59

Re: [SOLVED] Video problem, Intel

#14 2016-11-09 07:21:08

Re: [SOLVED] Video problem, Intel

#15 2016-11-09 17:06:53

Re: [SOLVED] Video problem, Intel

#16 2016-11-09 20:05:25

Re: [SOLVED] Video problem, Intel

#17 2016-11-09 21:11:15

Re: [SOLVED] Video problem, Intel

#18 2016-11-10 18:22:51

Re: [SOLVED] Video problem, Intel

#19 2016-11-10 21:56:21

Re: [SOLVED] Video problem, Intel

#20 2016-11-11 01:10:10

Re: [SOLVED] Video problem, Intel

#21 2016-11-11 02:34:42

Re: [SOLVED] Video problem, Intel

#22 2016-11-11 05:03:01

Re: [SOLVED] Video problem, Intel

#23 2016-11-11 07:29:43

Re: [SOLVED] Video problem, Intel

#24 2016-11-11 17:30:02

Re: [SOLVED] Video problem, Intel

#25 2016-11-11 19:11:26

Re: [SOLVED] Video problem, Intel

Board footer