You are not logged in.

#1 2019-01-30 09:49:52

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 5,458
Website

Experimental BunsenLabs Lithium repository has been set up

There is now an experimental repository holding BunsenLabs packages migrated from Helium with the minimum of changes needed to install and run on Debian Buster. This is not yet a BunsenLabs Lithium system, but just a base on which development can move forward.

If you would like to try it, make a basic Debian Buster CLI install from eg the "netinst" iso here:

amd64
https://cdimage.debian.org/cdimage/bust … d64/iso-cd
or, with non-free firmware:
https://cdimage.debian.org/cdimage/unof … d64/iso-cd

i386
https://cdimage.debian.org/cdimage/bust … 386/iso-cd
or, with non-free firmware:
https://cdimage.debian.org/cdimage/unof … 386/iso-cd

Don't set a password for 'root' in the user setup phase (you'll have sudo rights) and at the final package selection phase, choose only "standard system utilities".

Then add this line to your apt sources:

deb https://kelaino.bunsenlabs.org/~johnraff/debian lithium main

Also make sure you add 'contrib' and 'non-free' to all the existing debian lines, something like:

deb https://deb.debian.org/debian buster main contrib non-free

...etc

Now you can get a rough Helium/Lithium clone by:

wget https://kelaino.bunsenlabs.org/~johnraff/helium-dev.asc
sudo cp helium-dev.asc /etc/apt/trusted.gpg.d/
sudo apt-get update
sudo apt-get install --no-install-recommends bunsen-meta-all

It basically looks like Helium at the moment, but that will change in time.

-----------------------------------
Some necessary post-install tweaks, courtesy of hhh:

network

Since iwconfig sets up the internet connection during the installation, editing of /etc/network/interfaces is necessary after the BL desktop is installed to allow Network Manager to handle connections.

Comment out anything except for the first eight lines as so...

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#allow-hotplug enp9s0
#iface enp9s0 inet dhcp

wireless

Since b43 drivers for Broadcom WiFi are not available in buster, you can download the packages from sid and install them with dpkg -i:

https://packages.debian.org/sid/all/fir … r/download
and
amd64: https://packages.debian.org/sid/amd64/b … r/download
i386: https://packages.debian.org/sid/i386/b4 … r/download

volume icon

pnmixer has a GUI update that hasn't been configured yet in our repo.
Fix the panel volume icon via right-click>Preferences>View>Icon Theme, select Use System Theme and click Apply.

-----------------------------------

Please report any bugs you find in the discussion thread if they are relatively simple, or in a new dedicated thread in that forum.
Thanks!

Last edited by johnraff (2019-02-01 06:57:28)


John
--------------------
( a boring Japan blog , Japan Links, idle twitterings  and GitStuff )
In case you forget, the rules.

Offline

#2 2019-01-30 11:56:34

Bearded_Blunder
Dodging A Bullet
From: Seat: seat0; vc7
Registered: 2015-09-29
Posts: 730

Re: Experimental BunsenLabs Lithium repository has been set up

Problem:
Unless you use the advanced installer & specify them or intervene manually contrib and non-free don't get set up in sources
This renders bunsen-meta-all uninstallable owing to uninstallable depends.
 
Aside: Does this mean bunsen-meta-all should live under contrib itself? Since it has depends on non-free?

Worth mentioning:
Don't set a password on the root account.

Last edited by Bearded_Blunder (2019-01-30 12:08:01)


Blessed is he who expecteth nothing, for he shall not be disappointed...
If there's an obscure or silly way to break it, but you don't know what.. Just ask me

Offline

#3 2019-01-30 12:37:58

Sector11
Tpyo Knig
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,397

Re: Experimental BunsenLabs Lithium repository has been set up

Interesting


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#4 2019-01-30 16:47:37

hhh
Meep!
Registered: 2015-09-17
Posts: 7,921
Website

Re: Experimental BunsenLabs Lithium repository has been set up

@johnraff, great job, thanks! I'll carve out some time time ASAP to set it up here, hopefully tonight.

-edit- Alpha 5 of the Debian Installer was released a few days ago, I'll use that non-free netinstall image. Note that the b43 Broadcom drivers are not included in these ISOs.

amd64

https://cdimage.debian.org/cdimage/unof … 64/iso-cd/

i386

https://cdimage.debian.org/cdimage/unof … 86/iso-cd/

-edit- I posted the torrent links but they're not available yet. ISO links now posted, and I'm downloading one!

Last edited by hhh (2019-01-30 17:04:34)

Offline

#5 2019-01-30 17:19:04

damo
....moderator....
Registered: 2015-08-20
Posts: 4,966

Re: Experimental BunsenLabs Lithium repository has been set up

Bearded_Blunder wrote:

Problem:
Unless you use the advanced installer & specify them or intervene manually contrib and non-free don't get set up in sources
This renders bunsen-meta-all uninstallable owing to uninstallable depends.
.....

Installs OK in a qemu VM, with the above proviso.


Be Excellent to Each Other...

FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Offline

#6 2019-01-30 17:24:04

hhh
Meep!
Registered: 2015-09-17
Posts: 7,921
Website

Re: Experimental BunsenLabs Lithium repository has been set up

For feedback on installation and usage of this test repo, please use the Development thread here...

https://forums.bunsenlabs.org/viewtopic.php?id=5547

Offline

#7 2019-01-30 19:11:56

dolly
Miss Mixunderstand
From: /lab1
Registered: 2015-10-03
Posts: 366

Re: Experimental BunsenLabs Lithium repository has been set up

Yay  big_smile Thanks for links and info guys, will try to set something up asap. smile

Edit; asap a little bit later. Installation in vbox on W10 host were very smooth. If all goes well I will be able to do an install to hd soon, possibly already next week.  Will of course report  back, if or when things get weird. big_smile

Last edited by dolly (2019-01-30 20:28:25)


Keep BunsenLabs #!yish please.

Offline

#8 2019-01-31 02:46:59

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 5,458
Website

Re: Experimental BunsenLabs Lithium repository has been set up

@B_B & @hhh thanks - OP has been updated with your improvements.

I have split off B_B's second post, and my reply, to hhh's thread in development. Please post feedback not directly related to the OP (ie installation instructions) there. Thanks!


John
--------------------
( a boring Japan blog , Japan Links, idle twitterings  and GitStuff )
In case you forget, the rules.

Offline

#9 2019-01-31 10:18:29

Bearded_Blunder
Dodging A Bullet
From: Seat: seat0; vc7
Registered: 2015-09-29
Posts: 730

Re: Experimental BunsenLabs Lithium repository has been set up

johnraff wrote:

EDIT Some necessary post-install tweaks, courtesy of hhh:

Since iwconfig sets up the internet connection during the installation, editing of /etc/apt/interfaces was

Being on typo patrol surely that's.

/etc/netwotk/interfaces

Blessed is he who expecteth nothing, for he shall not be disappointed...
If there's an obscure or silly way to break it, but you don't know what.. Just ask me

Offline

#10 2019-02-01 07:00:14

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 5,458
Website

Re: Experimental BunsenLabs Lithium repository has been set up

Bearded_Blunder wrote:

Being on typo patrol surely that's.

/etc/netwotk/interfaces

monkey
But I got the message anyway. Done, and thanks!


John
--------------------
( a boring Japan blog , Japan Links, idle twitterings  and GitStuff )
In case you forget, the rules.

Offline

#11 2019-04-04 01:55:40

hhh
Meep!
Registered: 2015-09-17
Posts: 7,921
Website

Re: Experimental BunsenLabs Lithium repository has been set up

Topic stickied.

Offline

#12 2019-05-31 08:02:51

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 5,458
Website

Re: Experimental BunsenLabs Lithium repository has been set up

johnraff wrote:

wireless

Since b43 drivers for Broadcom WiFi are not available in buster, you can download the packages from sid and install them with dpkg -i...

Good news - firmware-b43-installer and firmware-b43legacy-installer are back in the Buster repos, so no hacking needed. smile

The latest bunsen-meta-all in Lithium-dev will bring them in.


John
--------------------
( a boring Japan blog , Japan Links, idle twitterings  and GitStuff )
In case you forget, the rules.

Offline

#13 2019-07-12 08:40:22

Naik
Member
From: Lipsia
Registered: 2015-10-03
Posts: 165

Re: Experimental BunsenLabs Lithium repository has been set up

hey folks!
I am willing to test this and have just upgraded some 1600+ packages on my BL-install by switching from stretch to stable in the sources.list. Now i have set up the lithium repo in bunsen.list and am atempting to do a full-upgrade via apt. As it seems this would remove bunsen-openbox among others. is it save to do so, or will i break my system?

naik@GerryTSSD[bin]$ sudo apt update
OK:2 http://security.debian.org stable/updates InRelease                           
OK:3 http://ftp.de.debian.org/debian stable InRelease                              
OK:4 http://deb.debian.org/debian stretch-backports InRelease                      
Ign:5 http://dl.google.com/linux/earth/deb stable InRelease                        
OK:6 https://packages.cisofy.com/community/lynis/deb stable InRelease              
OK:7 http://dl.google.com/linux/earth/deb stable Release                           
OK:1 http://eu.pkg.bunsenlabs.org/debian stretch-backports InRelease               
Holen:8 https://kelaino.bunsenlabs.org/~johnraff/debian lithium InRelease [3.388 B]
OK:10 https://packages.riot.im/debian stretch InRelease                            
OK:11 http://repository.spotify.com stable InRelease                      
OK:12 http://ftp.de.debian.org/debian stable-updates InRelease          
OK:9 https://liquorix.net/debian stretch InRelease                      
Holen:14 https://kelaino.bunsenlabs.org/~johnraff/debian lithium/main amd64 Packages [8.829 B]
Es wurden 12,2 kB in 1 s geholt (9.564 B/s).
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Aktualisierung für 326 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen.
naik@GerryTSSD[bin]$ sudo apt full-upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
  dleyna-server gir1.2-clutter-1.0 gir1.2-clutter-gst-3.0 gir1.2-cogl-1.0
  gir1.2-coglpango-1.0 gir1.2-evince-3.0 gir1.2-gst-plugins-base-1.0
  gir1.2-gtkclutter-1.0 gir1.2-gtksource-3.0 gir1.2-json-1.0 gnome-sushi
  gnome-user-guide libapparmor-perl libart-2.0-2 libass5 libavdevice57
  libavfilter6 libavresample3 libboost-atomic1.62.0 libboost-chrono1.62.0
  libboost-date-time1.62.0 libboost-filesystem1.62.0 libboost-iostreams1.62.0
  libboost-locale1.62.0 libboost-regex1.62.0 libboost-system1.62.0
  libboost-thread1.62.0 libcdio-cdda1 libcdio-paranoia1 libcdio13 libcfitsio5
  libcue2 libdleyna-connector-dbus-1.0-1 libdleyna-core-1.0-3 libebur128-1
  libexempi3 libexempi8 libgail-3-0 libgegl-0.3-0 libgjs0g libgles2-mesa
  libglew2.0 libgltf-0.0-0v5 libgnome-autoar-0-0 libgnome-desktop-3-12
  libgsf-1-114 libgsf-1-common libgtksourceview-3.0-1 libgtksourceview-3.0-common
  libgweather-3-6 libhunspell-1.4-0 libilmbase12 libindi1 libiptcdata0
  libjemalloc1 liblivemedia57 libmagick++-6.q16-7 libmagickcore-6.q16-3
  libmagickcore-6.q16-3-extra libmagickwand-6.q16-3 libminiupnpc10 libmozjs-24-0
  libmozjs-60-0 libmusicbrainz5-2 libmusicbrainz5cc2v5 libnfs8
  libopencv-calib3d2.4v5 libopencv-core2.4v5 libopencv-features2d2.4v5
  libopencv-flann2.4v5 libopencv-highgui2.4-deb0 libopencv-imgproc2.4v5
  libopencv-objdetect2.4v5 libopencv-video2.4v5 libopenexr22 libopenimageio1.6
  libopenvdb3.2 liborcus-0.11-0 libosinfo-1.0-0 libperl5.24 libpoppler64
  libpostproc54 libprotobuf-lite10 libpython3.5 libpython3.5-dev
  libpython3.5-minimal libpython3.5-stdlib libqpdf17 libraw15 libreoffice-ogltrans
  libreoffice-pdfimport libsdl-net1.2 libsmpeg0 libsndio6.1 libsrtp0 libswscale4
  libtelepathy-glib0 libtracker-control-2.0-0 libtracker-miner-2.0-0
  libtracker-sparql-1.0-0 libtracker-sparql-2.0-0 libupnp6 libva-wayland1
  libwayland-egl1-mesa libwcs5 nautilus nautilus-data osinfo-db python-configobj
  python-dateutil python-fasteners python-gflags python-googleapi python-httplib2
  python-monotonic python-oauth2client python-parsedatetime python-ply
  python-psutil python-pyasn1-modules python-rsa python-simplejson python-tz
  python-uritemplate python-vobject python3.5 python3.5-dev python3.5-minimal qpdf
  tracker tracker-extract tracker-miner-fs ttf-wqy-zenhei
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden Pakete werden ENTFERNT:
  bunsen-meta-libreoffice bunsen-openbox childsplay-alphabet-sounds-ca gtkorphan
  libclamav7 libclamunrar7 libcupscgi1 libcupsmime1 libcupsppdc1 libcurl3 libgjs0e
  libgnustep-base1.24 libgsl2 libgtk2-gladexml-perl libllvm3.8 libllvm3.9
  libreoffice-style-galaxy libreoffice-systray libsensors4 libthunarx-2-0
  python-astrometry python-astropy
Die folgenden NEUEN Pakete werden installiert:
  bubblewrap bunsen-papirus-icon-theme chafa cups-ipp-utils dc dwz
  firebird3.0-common firebird3.0-common-doc firebird3.0-server-core
  firebird3.0-utils fonts-liberation2 foomatic-db-compressed-ppds g++-8 gdal-data
  gir1.2-ayatanaappindicator3-0.1 gnome-settings-daemon-common
  gnustep-base-runtime gstreamer1.0-gl gstreamer1.0-gtk3 guile-2.0-libs jgmenu
  libaec0 libappstream4 libaribb24-0 libarmadillo9 libarpack2 libass9
  libasync-mergepoint-perl libavdevice58 libavfilter7 libavformat58
  libb-hooks-op-check-perl libblkid-dev libbluray2 libboost-atomic1.67.0
  libboost-chrono1.67.0 libboost-filesystem1.67.0 libboost-locale1.67.0
  libboost-regex1.67.0 libboost-thread1.67.0 libbrotli1 libcapture-tiny-perl
  libcdio-cdda2 libcdio-paranoia2 libcdio18 libchafa0 libcharls2 libcurl4 libdap25
  libdapclient6v5 libdapserver7v5 libdcmtk14 libdevel-callchecker-perl
  libdigest-bubblebabble-perl libdynaloader-functions-perl libepsilon1
  libepubgen-0.1-1 libfbclient2 libfreexl1 libfribidi-dev libfuture-perl libfyba0
  libgdal20 libgdcm2.8 libgegl-0.4-0 libgegl-common libgeos-3.7.1 libgeos-c1v5
  libgeotiff2 libgjs0g libglib2.0-dev-bin libgnome-desktop-3-17
  libgnustep-base1.26 libgraphene-1.0-0 libgsl23 libgslcblas0 libgspell-1-1
  libgspell-1-common libgstreamer-gl1.0-0 libgtop-2.0-11 libgupnp-igd-1.0-4
  libgweather-3-15 libhdf4-0-alt libhdf5-103 libheif1 libib-util libio-async-perl
  libixml10 libjemalloc2 libkf5notifyconfig-data libkf5notifyconfig5 libkmlbase1
  libkmlconvenience1 libkmldom1 libkmlengine1 libkmlregionator1 libkmlxsd1
  liblcms2-utils liblivemedia64 libmagick++-6.q16-8 libmagickcore-6.q16-6
  libmagickcore-6.q16-6-extra libmagickwand-6.q16-6 libmariadb3 libminiupnpc17
  libminizip1 libmount-dev libmozjs-60-0 libmypaint-1.3-0 libmypaint-common
  libmysofa0 libnet-dns-sec-perl libnet-libidn-perl libnetcdf13 libnfs12 libnice10
  libnumbertext-1.0-0 libnumbertext-data libodbc1 libogdi3.2 libopencv-core3.2
  libopencv-imgcodecs3.2 libopencv-imgproc3.2 libopencv-videoio3.2 libopenexr23
  libopenimageio2.0 libopenvdb5.2 liborcus-0.14-0 libperl5.28 libplacebo7
  libpostproc55 libproj13 libprotobuf-lite17 libpython2-dbg libpython2-dev
  libpython2-stdlib libpython3.7 libpython3.7-dev libpython3.7-minimal
  libpython3.7-stdlib libqhull7 libqt5keychain1 libqt5websockets5 libqxp-0.0-0
  libraw19 libreoffice-sdbc-firebird libreoffice-style-colibre
  libreoffice-style-elementary librhash0 libsdl2-image-2.0-0 libsdl2-mixer-2.0-0
  libsdl2-net-2.0-0 libsdl2-ttf-2.0-0 libselinux1-dev libsensors-config
  libsensors5 libsepol1-dev libsereal-decoder-perl libsereal-encoder-perl
  libsereal-perl libsocket++1 libspatialaudio0 libspatialite7 libsrtp2-1
  libstaroffice-0.0-0 libstdc++-8-dev libstruct-dumb-perl libsuperlu5 libswscale5
  libsynctex2 libsz2 libtest-fatal-perl libtest-refcount-perl libtommath1
  libturbojpeg0 libunwind8 libupnp13 liburiparser1 libva-wayland2 libvidstab1.1
  libwcs6 libwoff1 libxerces-c3.2 libxmlsec1 libxmlsec1-nss libzmf-0.0-0
  mariadb-common mscompress mysql-common odbcinst odbcinst1debian2 pango1.0-tools
  papirus-icon-theme perl-modules-5.28 printer-driver-all printer-driver-brlaser
  printer-driver-c2050 printer-driver-c2esp printer-driver-cjet
  printer-driver-dymo printer-driver-escpr printer-driver-foo2zjs
  printer-driver-foo2zjs-common printer-driver-fujixerox printer-driver-m2300w
  printer-driver-min12xxw printer-driver-pnm2ppa printer-driver-ptouch
  printer-driver-pxljr printer-driver-sag-gdi printer-driver-splix proj-bin
  proj-data python-uritools python2 python2-dbg python2-dev python2-minimal
  python3-astrometry python3-astropy python3-atomicwrites python3-attr
  python3-configobj python3-dateutil python3-decorator python3-distro
  python3-distutils python3-evdev python3-exif python3-fasteners python3-future
  python3-googleapi python3-httplib2 python3-lib2to3 python3-monotonic
  python3-more-itertools python3-numpy python3-oauth2client python3-olefile
  python3-parsedatetime python3-pluggy python3-ply python3-psutil python3-py
  python3-pyasn1 python3-pyasn1-modules python3-pytest python3-pytest-arraydiff
  python3-pytest-astropy python3-pytest-doctestplus python3-pytest-openfiles
  python3-pytest-remotedata python3-pyudev python3-rsa python3-scipy
  python3-sqlalchemy python3-sqlalchemy-ext python3-tz python3-uritemplate
  python3-vobject python3.7 python3.7-dev python3.7-minimal
  qml-module-qtquick-controls qml-module-qtquick-layouts tcl tix tk xbindkeys
  xbindkeys-config yudit-common
Die folgenden Pakete werden aktualisiert (Upgrade):
  apparmor-utils astrometry.net blender blender-data build-essential bunsen-common
  bunsen-configs bunsen-configs-pulse bunsen-conky bunsen-docs bunsen-exit
  bunsen-faenza-icon-theme bunsen-fortune bunsen-images bunsen-keyring
  bunsen-meta-printer-support bunsen-os-release bunsen-paper-icon-theme
  bunsen-pipemenus bunsen-python-apt-template bunsen-themes bunsen-thunar
  bunsen-utilities cheese cheese-common childsplay clamav cmake cmake-data cups
  cups-client cups-core-drivers cups-daemon cups-filters cups-filters-core-drivers
  curl dconf-gsettings-backend dconf-service debhelper dpkg-dev evince
  evince-common feh firefox-esr g++ galternatives gcalcli gimp gimp-data
  gir1.2-atk-1.0 gir1.2-evince-3.0 gir1.2-freedesktop gir1.2-glib-2.0
  gir1.2-gst-plugins-base-1.0 gir1.2-gstreamer-1.0 gir1.2-gtk-3.0
  gir1.2-javascriptcoregtk-4.0 gir1.2-packagekitglib-1.0 gir1.2-pango-1.0
  gir1.2-webkit2-4.0 glib-networking glib-networking-common
  glib-networking-services gnome-control-center gnome-control-center-data
  gnome-online-accounts gnome-settings-daemon gnome-sushi gnustep-base-common
  gparted gsmartcontrol gstreamer1.0-libav gstreamer1.0-plugins-bad
  gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly
  gstreamer1.0-pulseaudio gstreamer1.0-x gtk-update-icon-cache gvfs gvfs-backends
  gvfs-common gvfs-daemons gvfs-fuse gvfs-libs hedgewars hplip hplip-data
  imagemagick-6.q16 indi-bin inkscape kstars kstars-data libalgorithm-diff-xs-perl
  libapparmor-perl libapt-pkg-perl libastrometry0 libatk-adaptor
  libatk-bridge2.0-0 libatk1.0-0 libatk1.0-data libatk1.0-dev libatkmm-1.6-1v5
  libcairo-perl libcheese-gtk25 libcheese8 libclass-xsaccessor-perl libclone-perl
  libcommon-sense-perl libcups2 libcupsimage2 libdconf1 libdpkg-perl
  libevdocument3-4 libevview3-3 libfcgi-perl libfile-fcntllock-perl
  libfile-fnmatch-perl libgail-3-0 libgimp2.0 libgirepository-1.0-1
  libgl1-mesa-dri libglib-perl libglib2.0-0 libglib2.0-bin libglib2.0-dev
  libglibmm-2.4-1v5 libgoa-1.0-0b libgoa-1.0-common libgoa-backend-1.0-1
  libgstreamer-plugins-bad1.0-0 libgstreamer-plugins-base1.0-0 libgstreamer1.0-0
  libgtk-3-0 libgtk2-perl libgtkmm-2.4-1v5 libgtkmm-3.0-1v5 libhpmud0
  libhtml-parser-perl libimage-magick-q16-perl libindi-plugins
  libindialignmentdriver1 libinput-tools libinput10 libio-pty-perl
  libio-socket-ssl-perl libjavascriptcoregtk-4.0-18 libjson-xs-perl
  liblist-moreutils-perl liblocale-gettext-perl libnautilus-extension1a
  libnet-dns-perl libnet-ssleay-perl libopenjfx-jni libopenmpt-modplug1
  libopenmpt0 libossp-uuid-perl libpackage-stash-xs-perl libpackagekit-glib2-18
  libpango-1.0-0 libpango-perl libpango1.0-0 libpango1.0-dev libpangocairo-1.0-0
  libpangoft2-1.0-0 libpangomm-1.4-1v5 libpangoxft-1.0-0 libparams-classify-perl
  libparams-util-perl libparams-validate-perl libperlio-gzip-perl libpython-dbg
  libpython-dev libpython-stdlib libpython2.7 libpython2.7-dbg libpython2.7-dev
  libpython2.7-minimal libpython2.7-stdlib libpython3-dev libpython3-stdlib
  libreoffice libreoffice-avmedia-backend-gstreamer libreoffice-base
  libreoffice-base-core libreoffice-base-drivers libreoffice-calc
  libreoffice-common libreoffice-core libreoffice-draw libreoffice-gnome
  libreoffice-gtk2 libreoffice-gtk3 libreoffice-impress libreoffice-java-common
  libreoffice-math libreoffice-ogltrans libreoffice-pdfimport
  libreoffice-report-builder libreoffice-report-builder-bin
  libreoffice-script-provider-bsh libreoffice-script-provider-js
  libreoffice-script-provider-python libreoffice-sdbc-hsqldb
  libreoffice-sdbc-postgresql libreoffice-style-tango libreoffice-writer
  libsane-hpaio libscalar-list-utils-perl libsnmp30 libsocket6-perl
  libsort-key-perl libstdc++6 libsub-identify-perl libsub-name-perl libtbb2
  libtext-charwidth-perl libtext-csv-xs-perl libtext-hunspell-perl
  libtext-iconv-perl libunicode-utf8-perl libvariable-magic-perl libvlc-bin
  libvlc5 libwebkit2gtk-4.0-37 libxml-libxml-perl libxml-parser-perl
  libyaml-libyaml-perl libyelp0 lintian lm-sensors nautilus nautilus-data neofetch
  nitrogen onboard onboard-common onboard-data openbox openjdk-11-jdk
  openjdk-11-jdk-headless openjdk-11-jre openjdk-11-jre-headless packagekit
  packagekit-tools paper-icon-theme pavucontrol perl perl-base
  printer-driver-hpcups printer-driver-hpijs printer-driver-postscript-hp python
  python-dbg python-dev python-glade2 python-gtk2 python-minimal python-numpy
  python-pip-whl python-pygame python2.7 python2.7-dbg python2.7-dev
  python2.7-minimal python3 python3-apparmor python3-apt python3-cairo
  python3-cffi-backend python3-cracklib python3-crypto python3-cups python3-dbus
  python3-dev python3-gi python3-gi-cairo python3-gpg python3-hunspell
  python3-libapparmor python3-lxml python3-minimal python3-pil python3-pip
  python3-pkg-resources python3-renderpm python3-reportlab python3-reportlab-accel
  python3-setuptools python3-smbc python3-uno riot-web simplescreenrecorder
  sysstat terminator texinfo thunar thunar-data transmission-common
  transmission-gtk unar uno-libs3 ure vlc vlc-bin vlc-data vlc-l10n
  vlc-plugin-base vlc-plugin-qt vlc-plugin-video-output xpra xserver-xorg-core
  xserver-xorg-input-libinput xserver-xorg-video-amdgpu xserver-xorg-video-ati
  xserver-xorg-video-dummy xserver-xorg-video-fbdev xserver-xorg-video-intel
  xserver-xorg-video-nouveau xserver-xorg-video-qxl xserver-xorg-video-radeon
  xserver-xorg-video-vesa xserver-xorg-video-vmware yelp
324 aktualisiert, 271 neu installiert, 22 zu entfernen und 0 nicht aktualisiert.
Es müssen 1.057 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 791 MB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] 

naik --greetz


"Kaum macht [Mensch]* es richtig, funktioniert es sofort!"
BL-Kitchen on GitHub

Offline

#14 2019-07-12 09:32:26

damo
....moderator....
Registered: 2015-08-20
Posts: 4,966

Re: Experimental BunsenLabs Lithium repository has been set up

apt-cache show bunsen-openbox

Package: bunsen-openbox
...
...
Description: Modify the behaviour of Openbox for BunsenLabs
 This package modifies the behaviour of the Openbox window manager
 for use with BunsenLabs.
 .
 At present the following actions are performed:
  - Inhibit the setting of a background colour, described in
 Debian bug #843231 (fixed in Openbox 3.6.1-5).

It seems that it is no longer needed.


Be Excellent to Each Other...

FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Offline

#15 2019-07-14 22:01:42

Naik
Member
From: Lipsia
Registered: 2015-10-03
Posts: 165

Re: Experimental BunsenLabs Lithium repository has been set up

Ok, i did it!

It went smooth all the way and after restart i was very pleased with the outcome.
The only thing that bothered me was that jgmenu would not sync with the OB theme.
but since there are some more steps to go for me to become acquainted to jgmenu and there are some things i need to introduce into the new bl-rc.xml for openbox, I just replaced it with my old rc.xml for now and have my menu and stuff back and can start learning and tweaking... very nice!

I think I like lithium!

naik --greetz


"Kaum macht [Mensch]* es richtig, funktioniert es sofort!"
BL-Kitchen on GitHub

Offline

#16 2019-07-15 03:12:23

DeepDayze
Member
From: In Linux Land
Registered: 2017-05-28
Posts: 706

Re: Experimental BunsenLabs Lithium repository has been set up

Naik wrote:

Ok, i did it!

It went smooth all the way and after restart i was very pleased with the outcome.
The only thing that bothered me was that jgmenu would not sync with the OB theme.
but since there are some more steps to go for me to become acquainted to jgmenu and there are some things i need to introduce into the new bl-rc.xml for openbox, I just replaced it with my old rc.xml for now and have my menu and stuff back and can start learning and tweaking... very nice!

I think I like lithium!

naik --greetz

Nice, I may try this soon. I am sure malm is working on theming support for jgmenu as well.

Last edited by DeepDayze (2019-07-15 03:13:09)


Real Men Use Linux

Online

#17 2019-07-15 03:35:02

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 5,458
Website

Re: Experimental BunsenLabs Lithium repository has been set up

The jgmenu theming issue is because the new config uses a custom openbox bl-rc.xml. An upgraded jgmenu - coming soon - will make the "sync theme" menu item work again.

Last edited by johnraff (2019-07-15 04:05:26)


John
--------------------
( a boring Japan blog , Japan Links, idle twitterings  and GitStuff )
In case you forget, the rules.

Offline

#18 2019-07-16 18:46:53

Naik
Member
From: Lipsia
Registered: 2015-10-03
Posts: 165

Re: Experimental BunsenLabs Lithium repository has been set up

I ran into another issue, I posted here. Apparently there is an issue with bunsen-os-release which i opend an issue on github for. Don't want to be nagging there, just wanted to share my finding..

naik --greetz


"Kaum macht [Mensch]* es richtig, funktioniert es sofort!"
BL-Kitchen on GitHub

Offline

#19 Yesterday 01:05:49

hhh
Meep!
Registered: 2015-09-17
Posts: 7,921
Website

Re: Experimental BunsenLabs Lithium repository has been set up

We're aware of this, it's just not a priority yet. You can get neofetch to show bunsenLabs if you remove lsb-release, the current bunsen-os-release was built incorrectly, IIRC.

Offline

#20 Yesterday 01:12:56

johnraff
nullglob
From: Nagoya, Japan
Registered: 2015-09-09
Posts: 5,458
Website

Re: Experimental BunsenLabs Lithium repository has been set up

@Naik many thanks for your careful checking!
This kind of detailed bug reporting is really appreciated.

It's true that we noticed the Lithium bunsen-os-release issue (changes from stretch to buster) a while ago, but it had been laid aside... It will have to be fixed before the Lithium release though, because it affects how the distribution is presented in the grub menu.


John
--------------------
( a boring Japan blog , Japan Links, idle twitterings  and GitStuff )
In case you forget, the rules.

Offline

#21 Yesterday 13:31:06

Naik
Member
From: Lipsia
Registered: 2015-10-03
Posts: 165

Re: Experimental BunsenLabs Lithium repository has been set up

johnraff wrote:

@Naik many thanks for your careful checking!
This kind of detailed bug reporting is really appreciated.

You'r welcome!

johnraff wrote:

It's true that we noticed the Lithium bunsen-os-release issue (changes from stretch to buster) a while ago, but it had been laid aside... It will have to be fixed before the Lithium release though, because it affects how the distribution is presented in the grub menu.

Don't hesitate. It is all good for now and the simple fact that some of us (well, me) are a little impatient, shouldn't bother you all.

naik --greetz


"Kaum macht [Mensch]* es richtig, funktioniert es sofort!"
BL-Kitchen on GitHub

Offline

Board footer

Powered by FluxBB