You are not logged in.

#2051 2018-06-17 09:48:27

ghorvath
Member
Registered: 2015-10-01
Posts: 142

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

This is what I like:

conky.config = {

--  Window Settings
    own_window = true,
    own_window_type = 'normal',
    own_window_transparent = true,
    own_window_hints = 'undecorated,below,skip_taskbar,skip_pager,sticky',
    own_window_colour = '000000',
    own_window_class = 'Conky',
    own_window_title = 'BunsenLabs Default Conky',

-- ARGB can be used for real transparency
--own_window_argb_visual = true, -- Options: true|false

-- NOTE that a composite manager is required for real transparency and ARGB will not
-- work as desired (in most cases) in conjunction with 'own_window_type override'.
-- Use with: own_window_type = 'normal',
-- Use with: own_window_transparent = false,

-- When ARGB visuals are enabled, use the following to modify the alpha value. Valid
-- range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
--own_window_argb_value = 150,

    minimum_width = 200, minimum_height = 0,-- width | height
    maximum_width = 200,

    gap_x = 20,-- left | right
    gap_y = 45,-- up | down

    alignment = 'top_right',
--  End Window Settings


--  Font Settings
-- Use Xft (anti-aliased font and stuff)
    use_xft = true,

--font = 'Liberation Mono:bold:size=10',
--font = 'Liberation Sans:size=10',
    font = 'Sans-serif:size=10',

-- Alpha of Xft font. Must be a value at or between 1 and 0
    xftalpha = 1,

-- Force UTF8? requires XFT
    override_utf8_locale = true,

    uppercase = false,
--  End Font Settings


--  Color Settings
    draw_shades = false,
    default_shade_color = '000000',

    draw_outline = false,-- amplifies text if true
    default_outline_color = '000000',

    default_color = '678b8b', -- Beam green
--default_color = '656667', -- Waldorf original colour
--default_color = '7a7a7a', -- Flame  & BunsenLabs Grey
--default_color = '929292', -- BunsenLabs Grey
--default_color = 'C0C0C0', -- BunsenLabs Silver
    color0 = 'B0E0E6',-- PowderBlue
    color1 = '778899',-- LightSlateGray
    color2 = 'D8BFD8',-- Thistle
    color3 = '9ACD32',-- YellowGreen
    color4 = 'FFA07A',-- LightSalmon
    color5 = 'FFDEAD',-- NavajoWhite
    color6 = '00BFFF',-- DeepSkyBlue
    color7 = '5F9EA0',-- CadetBlue
    color8 = 'BDB76B',-- DarkKhaki
    color9 = 'C0C0C0',-- Silver
--  End Color Settings


--  Borders Section
    draw_borders = false,
-- Stippled borders?
    stippled_borders = 5,
-- border margins
    border_inner_margin = 5,
    border_outer_margin = 0,
-- border width
    border_width = 2,
-- graph borders
    draw_graph_borders = false,
--default_graph_height = 15,
--default_graph_width = 40,
--  End Borders Section


--  Miscellaneous Section
-- Boolean value, if true, Conky will be forked to background when started.
    background = true,

-- Adds spaces around certain objects to stop them from moving other things
-- around, this only helps if you are using a mono font
-- Options: right, left or none
    use_spacer = 'none',

-- Default and Minimum size is 256 - needs more for single commands that
-- "call" a lot of text IE: bash scripts
--text_buffer_size = 6144,

-- Subtract (file system) buffers from used memory?
    no_buffers = true,

-- change GiB to G and MiB to M
    short_units = true,

-- Imlib2 image cache size, in bytes. Default 4MiB Increase this value if you use
-- $image lots. Set to 0 to disable the image cache.
    imlib_cache_size = 0,

-- Use the Xdbe extension? (eliminates flicker)
-- It is highly recommended to use own window with this one
-- so double buffer won't be so big.
    double_buffer = true,

-- Maximum size of user text buffer, i.e. layout below TEXT line in config file
-- (default is 16384 bytes)
--max_user_text = 16384,

-- Desired output unit of all objects displaying a temperature. Parameters are
-- either "fahrenheit" or "celsius". The default unit is degree Celsius.
--temperature_unit = 'Fahrenheit',

-- Update interval in seconds
    update_interval = 3,
    update_interval_on_battery = 6
    
--  End Miscellaneous Section
};

With conky 1.9 the following did the trick:

own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager,sticky

Offline

#2052 2018-06-17 10:14:03

ghorvath
Member
Registered: 2015-10-01
Posts: 142

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Ah, ok, I figured it out. The following changes are needed:

own_window_type = 'normal'
own_window_class = 'Conky'

The other settings of the original weather script can be used without any changes, and then this does the trick.

Offline

#2053 2018-06-17 13:32:13

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Alright, good to know you've made it ghorvath.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2054 2018-06-19 17:50:11

garpu
Member
Registered: 2018-06-19
Posts: 10

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

So I've been having some issues with Wunderground being unreliable (not loading weather data every 2-3 updates, so I thought I was over my allotted calls.)  I noticed this message here:

To improve our services and enhance our relationship with our users, we will no longer provide free weather API keys as part of our program. If you have been directed to download our Weather Underground free API key by a third party provider, please contact your vendor for resolution.

Offline

#2055 2018-06-19 19:05:29

unklar
Member
Registered: 2015-10-31
Posts: 914

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

I have already referred here to this unreliability of the data transmitted (mrpeachy's WUN).
It is the same API key.

The statement you quoted I evaluate that it only affects NEW keys.
I assume, however, that the end has been rung in.   monkey

Offline

#2056 2018-06-19 19:28:14

garpu
Member
Registered: 2018-06-19
Posts: 10

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

unklar wrote:

I have already referred here to this unreliability of the data transmitted (mrpeachy's WUN).
It is the same API key.

The statement you quoted I evaluate that it only affects NEW keys.
I assume, however, that the end has been rung in.   monkey

Yeah, I switched to NWS scripts. I do need to hack up something to give me a satellite image, though.

Offline

#2057 2018-06-19 21:00:53

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Try using the following key:

d8585d80376a429e

It should work for all users.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2058 2018-06-20 12:51:32

unklar
Member
Registered: 2015-10-31
Posts: 914

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

I don't think it has anything to do with that key, Teo. neutral

The big advantage of the Wundergroung API so far was that I could select PWS (personal weather station). This made the weather forecast as nearh from my location possible as it was not the case otherwise

pws:ILICHTEN11 I used for many years. But this station did not offer any wind data and I had to change.
pws:IDEUTSCH6 much with the redesign of the website away and with
pws:ILUGAUER3 I don't get continuously reliable data because the evening changes to Kalovy Vary or Altenburg-Nobitz (EDAC).
Besides, 80 - 100km distance does not make sense.

Now I have
pws:IMLSEN8 discovers. Let's see what it looks like.   big_smile

Last edited by unklar (2018-06-20 12:52:39)

Offline

#2059 2018-06-21 18:05:24

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

At the end of the day though, since WU aren't issuing new API keys, the script needs to be updated or withdrawn.
Stay tuned guys.

Last edited by TeoBigusGeekus (2018-06-21 20:11:16)


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2060 2018-06-21 20:24:51

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Can I get some testers to check the 2_WUnderground script with the fixed API key?
ie:

#!/bin/bash

#put your hemisphere here: n for north, s for south
hemisphere=n

#put your Weather Underground address API here
address="http://api.wunderground.com/api/d8585d80376a429e/conditions/forecast10day/astronomy/hourly/satellite/q/Greece/kastoria.json"

wun_icon_to_png () {
    if [[ $1 == day ]]; then
        case $2 in
            chanceflurries)
                echo 21
            ;;
            chancerain)
                echo 14
            ;;
            chancesleet)
                echo 26
            ;;
            chancesnow)
                echo 20
            ;;
            chancetstorms)
                echo 17
            ;;
            clear)
                echo 1
            ;;
            cloudy)
                echo 7
            ;;
            flurries)
                echo 21
            ;;
            fog)
                echo 11
            ;;
            hazy)
                echo 5
            ;;
            mostlycloudy)
                echo 6
            ;;
            mostlysunny)
                echo 4
            ;;
            partlycloudy)
                echo 4
            ;;
            partlysunny)
                echo 6
            ;;
            sleet)
                echo 26
            ;;
            rain)
                echo 18
            ;;
            snow)
                echo 22
            ;;
            sunny)
                echo 1
            ;;
            tstorms)
                echo 15
            ;;
            unknown)
                echo 0
            ;;
        esac
    elif [[ $1 == night ]]; then
        case $2 in
            chanceflurries)
                echo 43
            ;;
            chancerain)
                echo 39
            ;;
            chancesleet)
                echo 40
            ;;
            chancesnow)
                echo 43
            ;;
            chancetstorms)
                echo 41
            ;;
            clear)
                echo 33
            ;;
            cloudy)
                echo 38
            ;;
            flurries)
                echo 43
            ;;
            fog)
                echo 11
            ;;
            hazy)
                echo 37
            ;;
            mostlycloudy)
                echo 36
            ;;
            mostlysunny)
                echo 35
            ;;
            partlycloudy)
                echo 35
            ;;
            partlysunny)
                echo 36
            ;;
            sleet)
                echo 40
            ;;
            rain)
                echo 40
            ;;
            snow)
                echo 44
            ;;
            sunny)
                echo 33
            ;;
            tstorms)
                echo 41
            ;;
            unknown)
                echo 0
            ;;
        esac
    fi
    }

rm $HOME/2_Wunderground_API/*.png

kill -STOP $(pidof conky)

wget -O $HOME/2_Wunderground_API/raw_data $address

#Conditions feature
sed -n '/,	"current_observation": {/,/,	"satellite": {/p' $HOME/2_Wunderground_API/raw_data > $HOME/2_Wunderground_API/Conditions
sed -i 's/^[ \t]*"//g' $HOME/2_Wunderground_API/Conditions
sed -i '/current_observation\|image":\|logo_\|title":\|link":\|^[ \t]*},$\|^[ \t]*}$\|temperature_string\|forecast_url\|history_url\|ob_url\|satellite":/d' $HOME/2_Wunderground_API/Conditions
sed -i -e 's/":"/\n/g' -e 's/",\|": {$//g' -e 's/"precip_1hr_string/\nprecip_1hr_string/g' -e 's/":/\n/g' -e 's/,$//g' $HOME/2_Wunderground_API/Conditions
sed -i -e 's/^http.*\/c\/k\///g' -e '/gif/s/_.*$//g' $HOME/2_Wunderground_API/Conditions
day_or_night=$(sed -n 137p $HOME/2_Wunderground_API/Conditions)
if [[ $day_or_night == nt ]]; then
	cp $HOME/2_Wunderground_API/Forecast_Images/$(wun_icon_to_png night $(sed -n 135p $HOME/2_Wunderground_API/Conditions)).png $HOME/2_Wunderground_API/Now.png
else 
	cp $HOME/2_Wunderground_API/Forecast_Images/$(wun_icon_to_png day $(sed -n 135p $HOME/2_Wunderground_API/Conditions)).png $HOME/2_Wunderground_API/Now.png
fi

#Satellite feature, commented out by default, uncomment if you wish so
#sed -n '/,	"satellite": {/,/"forecast":{/p' $HOME/2_Wunderground_API/raw_data > $HOME/2_Wunderground_API/Satellite
#sed -i 's/^[ \t]*"//g' $HOME/2_Wunderground_API/Satellite
#sed -i -e '/image/!d' -e 's/^.*": "//g' -e 's/".*$//g' $HOME/2_Wunderground_API/Satellite
#for (( i=1; i<=3; i++ ))
#	  do
#          wget -O $HOME/2_Wunderground_API/sat_pic$i.png $(sed -n ${i}p $HOME/2_Wunderground_API/Satellite)
#	  done

#Forecast feature: Forecast
sed -n '/"forecast":{/,/"simpleforecast": {/p' $HOME/2_Wunderground_API/raw_data > $HOME/2_Wunderground_API/Forecast
sed -i -e '/"period":\|icon_url/d' $HOME/2_Wunderground_API/Forecast
sed -i 's/^[ \t]*"//g' $HOME/2_Wunderground_API/Forecast
sed -i -e '/period\|icon\|title\|fcttext/!d' -e 's/":"/\n/g' -e 's/":/\n/g' -e 's/",//g' -e 's/,$//g' -e 's/nt_//g' $HOME/2_Wunderground_API/Forecast

#Forecast feature: Simple Forecast
sed -n '/"simpleforecast": {/,/"hourly_forecast": \[/p' $HOME/2_Wunderground_API/raw_data > $HOME/2_Wunderground_API/Simple_Forecast
sed -i 's/^[ \t]*"//g' $HOME/2_Wunderground_API/Simple_Forecast
sed -i '/hourly_forecast\|simpleforecast\|forecastday\|{"date"\|period\|icon_url\|^[ \t]*},$\|^[ \t]*}$\|^[ \t]*,$\|^[ \t]*\]$/d' $HOME/2_Wunderground_API/Simple_Forecast
sed -i -e 's/":"/\n/g' -e 's/":/\n/g' -e 's/",$//g' -e 's/,$//g' -e 's/"$//g' $HOME/2_Wunderground_API/Simple_Forecast
sed -i '/^[ \t]*{/d' $HOME/2_Wunderground_API/Simple_Forecast
sed -i -e 's/^[ \t]*"//g' -e 's/^[ \t]*//g' $HOME/2_Wunderground_API/Simple_Forecast
for (( i=2; i<=146; i+=16 ))
    do
        cp $HOME/2_Wunderground_API/Forecast_Images/$(wun_icon_to_png day $(sed -n ${i}p $HOME/2_Wunderground_API/Forecast)).png $HOME/2_Wunderground_API/d$(( 1+(i-2)/16 )).png
        j=$(( i+8 ))
        cp $HOME/2_Wunderground_API/Forecast_Images/$(wun_icon_to_png night $(sed -n ${j}p $HOME/2_Wunderground_API/Forecast)).png $HOME/2_Wunderground_API/n$(( 1+(i-2)/16 )).png
    done

#Forecast feature: Hourly
sed -n '/"hourly_forecast": \[/,/"moon_phase": {/p' $HOME/2_Wunderground_API/raw_data > $HOME/2_Wunderground_API/Hourly
sed -i -e 's/^[ \t]*"//g' -e 's/^[ \t]*//g' $HOME/2_Wunderground_API/Hourly
sed -i '/hourly_forecast\|FCTTIME\|^{$\|^},$\|^}$\|^,$\|^]$\|moon_phase/d' $HOME/2_Wunderground_API/Hourly
sed -i -e 's/": /\n/g' -e 's/","/\n/g' -e 's/", "/\n/g' $HOME/2_Wunderground_API/Hourly
sed -i -e 's/^""//g' -e 's/^"//g' -e 's/^{"//g' -e 's/"},$//g' -e 's/",$//g' $HOME/2_Wunderground_API/Hourly 
sed -i -e 's/^},//g' -e 's/"}$//g' -e 's/^,//g' $HOME/2_Wunderground_API/Hourly
sed -i -e 's/^icon_url.*\/c\/k\///g' -e '/gif/s/_.*$//g' $HOME/2_Wunderground_API/Hourly
sed -i -e '/min_unpadded\|UTCDATE/,+1d' $HOME/2_Wunderground_API/Hourly
for (( i=64; i<=4212; i+=117 ))
    do
		j=$(( i+1 ))
		day_or_night=$(sed -n ${j}p $HOME/2_Wunderground_API/Hourly)
		if [[ $day_or_night == nt ]]; then
			cp $HOME/2_Wunderground_API/Forecast_Images/$(wun_icon_to_png night $(sed -n ${i}p $HOME/2_Wunderground_API/Hourly)).png $HOME/2_Wunderground_API/h$(( 1+(i-64)/117 )).png
		else 
			cp $HOME/2_Wunderground_API/Forecast_Images/$(wun_icon_to_png day $(sed -n ${i}p $HOME/2_Wunderground_API/Hourly)).png $HOME/2_Wunderground_API/h$(( 1+(i-64)/117 )).png
		fi
    done
    
#Forecast feature: Moon_Sun
sed -n '/"moon_phase": {/,/"sun_phase": {/p' $HOME/2_Wunderground_API/raw_data > $HOME/2_Wunderground_API/Moon_Sun
sed -i 's/^[ \t]*"//g' $HOME/2_Wunderground_API/Moon_Sun
sed -i '/moon_phase\|^[ \t]*},$\|sun_phase\|^[ \t]*}$/d' $HOME/2_Wunderground_API/Moon_Sun
sed -i -e 's/":"/\n/g' -e 's/".*$//g' $HOME/2_Wunderground_API/Moon_Sun
moon_phase=$(sed -n 6p $HOME/2_Wunderground_API/Moon_Sun)
if [[ $moon_phase == "Waning Crescent" ]]; then
	cp $HOME/2_Wunderground_API/moonicons/$hemisphere"21.png" $HOME/2_Wunderground_API/Moon_phase.png
elif [[ $moon_phase == "Waxing Crescent" ]]; then
	cp $HOME/2_Wunderground_API/moonicons/$hemisphere"04.png" $HOME/2_Wunderground_API/Moon_phase.png
elif [[ $moon_phase == "Waning Gibbous" ]]; then
	cp $HOME/2_Wunderground_API/moonicons/$hemisphere"17.png" $HOME/2_Wunderground_API/Moon_phase.png
elif [[ $moon_phase == "Waxing Gibbous" ]]; then
	cp $HOME/2_Wunderground_API/moonicons/$hemisphere"09.png" $HOME/2_Wunderground_API/Moon_phase.png
elif [[ $moon_phase == "First Quarter" ]]; then
	cp $HOME/2_Wunderground_API/moonicons/$hemisphere"07.png" $HOME/2_Wunderground_API/Moon_phase.png
elif [[ $moon_phase == "Last Quarter" ]]; then
	cp $HOME/2_Wunderground_API/moonicons/$hemisphere"19.png" $HOME/2_Wunderground_API/Moon_phase.png
elif [[ $moon_phase =~ New.* ]]; then
	cp $HOME/2_Wunderground_API/moonicons/$hemisphere"24.png" $HOME/2_Wunderground_API/Moon_phase.png
elif [[ $moon_phase =~ Full.* ]]; then
	cp $HOME/2_Wunderground_API/moonicons/$hemisphere"13.png" $HOME/2_Wunderground_API/Moon_phase.png
fi

kill -CONT $(pidof conky)

I can't quite be sure that this key is independent of calls for all users by checking it all by my own.
Any help would be appreciated.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2061 2018-06-21 22:23:18

garpu
Member
Registered: 2018-06-19
Posts: 10

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

So far so good for me.  (Am using a modified conkyrc2.)  Want me to keep using it for a few days?

Offline

#2062 2018-06-22 06:57:20

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Oh yes please garpu, thank you very much.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2063 2018-06-22 09:57:42

unklar
Member
Registered: 2015-10-31
Posts: 914

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Teo, this key to generality works.  smile
ende5.th.jpg

unklar wrote:

Now I have
pws:IMLSEN8 discovers. Let's see what it looks like.   big_smile

so far also without failures

Excellent work, thank you.  wink

Offline

#2064 2018-06-22 10:45:52

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Thanks for testing for me unklar.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2065 2018-06-22 12:52:31

garpu
Member
Registered: 2018-06-19
Posts: 10

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

So far so good for me this morning.  I was using a bit last night, and had one glitch, but I think it may have been an issue with our network.

Offline

#2066 2018-06-22 13:55:41

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Alright, cheers.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2067 2018-06-24 07:02:31

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

ANNOUNCEMENT

Update for the 2_Wunderground script. WU have apparently stopped providing api keys. The script has been changed to use what appears to be a master api key. Time will tell if it's gonna be valid forever or not. Other than this and the addition of the -o /dev/null switch to the wget command (no unnecessary log files will be created) the script remains unchanged.

Thanks to garpu and unklar for helping me test the script.

Last edited by TeoBigusGeekus (2018-06-24 07:03:02)


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2068 2018-06-24 14:09:28

chepioq
Member
Registered: 2015-11-29
Posts: 69

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Just one question
I use wunderground with my own key, and it still works.
Do you know if WU will deactivate this key or not ?

Offline

#2069 2018-06-24 14:44:14

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

I have no idea, just keep using it till you face any trouble.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2070 2018-06-25 14:41:04

chepioq
Member
Registered: 2015-11-29
Posts: 69

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

TeoBigusGeekus wrote:

I have no idea, just keep using it till you face any trouble.

Ok wait and see...

Offline

#2071 2018-06-25 16:46:24

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,528

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

There was a thing a while back with ConkyForcast if too many people used the same "key" the weather service would disable that key.

I have a paid for Wunderground key that still works, but I don't share it.

Last edited by Sector11 (2018-06-25 16:46:50)


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#2072 2018-06-25 16:53:58

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 968

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

The thing with the master key I've used to update the WU script is that it is actually used in the normal WU web page.
If you go to any place's weather page, say this for example, and read its source page, you can actually see that it draws the forecast from an api page, using that particular key:
2giBD8ot.png
So, this has to be an all purpose, use as much as you want key.
But only time will tell if that's the case.

Also, nice to have you back S11!!!! wink


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#2073 2018-06-25 20:31:39

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,528

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Thanks, don't post often anymore but I read a LOT!


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#2074 2018-06-26 20:26:59

unklar
Member
Registered: 2015-10-31
Posts: 914

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

In the README of @mrpeachy's wun (2014) :
500 Call's per day and 10 Call's per minute, free

The regulations of WUN (for the FREE) are documented on their website from 2013 and do not say any changes.

I greet you warmly and wish you health, Conkystator!   big_smile

Offline

#2075 2018-06-26 20:48:46

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,528

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Hi unklar ... It has been a long time hasn't it.  I will be back, just not sure when but I will do what I can to keep conky v 1.9 on my system.  Still do not like 1.10

But As Teo pointed out there have been changed.

However mrpeachys v9000 script still runs fine for me (C v1.9)
2018-06-26_174503_Scrot11.th.jpg


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

Board footer

Powered by FluxBB