[Solved] No sound with Pulse Audio

Sector11 · 2017-06-12 21:01:24

EDIT:

NOTE: I have had problems with PA since #! days. It did not work OOTB - I now have ALSA sound working.

This thread continues to try and find out why PA does not work on my machine.

===== End Edit =====

OK, I installed the new "Deuterium" build. I have no sound.

Speakers? I have no speakers speakers...
Sony Headphones; 9mm jack plugged into the jack for speakers

I was asked if I had sound in a live session: Nope not there either. DEAD SILENCE.

I have never had PulseAudio work on my machine. Not since it was first introduced in #! I have always managed to get it out and use plain ALSA.

I can't do that here, I tried this from the #! Forum:

incogn1to wrote:

Today is my lucky day. I finally found out how to completely remove pulseaudio from system.
sudo killall pulseaudio
sudo apt-get purge pulseaudio pulseaudio-utils gsntreamer0.10-pulseaudio paman pavumeter pavucontrol
sudo mv /etc/asound.conf /etc/asound.conf-bak
rm ~/.pulse-cookie
rm -r ~/.pulse
Reboot. Then install:
sudo apt-get install alsa-base alsa-tools alsa-tools-gui alsa-utils alsa-oss alsamixergui libalsaplayer0 volumeicon-alsa
After next reboot you will get normal sound without distortion, cracking noises and wasted CPU.
PS Happy New Year everybody!
PSS Even skype started working properly. The only problem - xfce4-volumed doesn't like the absence of pulseaudio very much, but I think I will find a way around it.

Had to modify it a bit for things like:

rm ~/.pulse-cookie
rm -r ~/.pulse

that don't exist here.

The end result is NO PulseAudio exists here, ALSA is in, the way it was previously (or I think it is) and still no sound. So I guess not the way it was before.

 12 Jun 17 @ 17:48:38 ~
   $ sudo apt-get purge pulseaudio.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Note, selecting 'pulseaudio-module-gconf' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-zeroconf' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-gconf-dbg' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-dbg' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-x11-dbg' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-bluetooth-dbg' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-lirc-dbg' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-utils-dbg' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-raop-dbg' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-x11' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-jack-dbg' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-esound-compat' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-jack' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-utils' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-raop' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-zeroconf-dbg' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-bluetooth' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-module-lirc' for regex 'pulseaudio.'
Note, selecting 'pulseaudio-esound-compat-dbg' for regex 'pulseaudio.'
Package 'pulseaudio-dbg' is not installed, so not removed
Package 'pulseaudio-esound-compat' is not installed, so not removed
Package 'pulseaudio-esound-compat-dbg' is not installed, so not removed
Package 'pulseaudio-module-bluetooth' is not installed, so not removed
Package 'pulseaudio-module-bluetooth-dbg' is not installed, so not removed
Package 'pulseaudio-module-gconf' is not installed, so not removed
Package 'pulseaudio-module-gconf-dbg' is not installed, so not removed
Package 'pulseaudio-module-jack' is not installed, so not removed
Package 'pulseaudio-module-jack-dbg' is not installed, so not removed
Package 'pulseaudio-module-lirc' is not installed, so not removed
Package 'pulseaudio-module-lirc-dbg' is not installed, so not removed
Package 'pulseaudio-module-raop' is not installed, so not removed
Package 'pulseaudio-module-raop-dbg' is not installed, so not removed
Package 'pulseaudio-module-x11' is not installed, so not removed
Package 'pulseaudio-module-x11-dbg' is not installed, so not removed
Package 'pulseaudio-module-zeroconf' is not installed, so not removed
Package 'pulseaudio-module-zeroconf-dbg' is not installed, so not removed
Package 'pulseaudio-utils' is not installed, so not removed
Package 'pulseaudio-utils-dbg' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
 
 12 Jun 17 @ 17:48:56 ~
   $

ALSA:

 12 Jun 17 @ 17:50:12 ~
   $ ser alsa
alias ser = aptitude search
i   alsa-base                                                      - dummy package to ease purging of obsolete conffiles                      
p   alsa-firmware-loaders                                          - ALSA software loaders for specific hardware                              
i   alsa-oss                                                       - ALSA wrapper for OSS applications                                        
i   alsa-tools                                                     - Console based ALSA utilities for specific hardware                       
i   alsa-tools-gui                                                 - GUI based ALSA utilities for specific hardware                           
i   alsa-utils                                                     - Utilities for configuring and using ALSA                                 
i   alsamixergui                                                   - graphical soundcard mixer for ALSA soundcard driver                      
v   alsaplayer                                                     -                                                                          
p   alsaplayer-alsa                                                - alsaplayer output module for ALSA                                        
p   alsaplayer-common                                              - audio player (common files)                                              
p   alsaplayer-daemon                                              - alsaplayer daemon                                                        
p   alsaplayer-esd                                                 - alsaplayer output module for EsounD                                      
p   alsaplayer-gtk                                                 - alsaplayer gtk interface                                                 
v   alsaplayer-interface                                           -                                                                          
p   alsaplayer-jack                                                - alsaplayer output module for JACK                                        
p   alsaplayer-nas                                                 - alsaplayer output module for NAS                                         
p   alsaplayer-oss                                                 - alsaplayer output module for OSS                                         
v   alsaplayer-output                                              -                                                                          
p   alsaplayer-text                                                - alsaplayer text interface                                                
p   alsaplayer-xosd                                                - alsaplayer XOSD display module                                           
p   balsa                                                          - e-mail client for GNOME                                                  
p   balsa-dbg                                                      - e-mail client for GNOME - debugging symbols                              
p   cairo-dock-alsamixer-plug-in                                   - Alsamixer plug-in for Cairo-dock                                         
i   gstreamer0.10-alsa                                             - GStreamer plugin for ALSA                                                
p   gstreamer1.0-alsa                                              - GStreamer plugin for ALSA                                                
p   libalsa-ocaml                                                  - OCaml bindings for the ALSA library                                      
p   libalsa-ocaml-dev                                              - OCaml bindings for the ALSA library                                      
v   libalsa-ocaml-dev-w7mv8                                        -                                                                          
v   libalsa-ocaml-w7mv8                                            -                                                                          
p   libalsaplayer-dev                                              - alsaplayer plugin library (development files)                            
i   libalsaplayer0                                                 - alsaplayer plugin library                                                
p   libclalsadrv-dev                                               - ALSA driver C++ access library (development files)                       
p   libclalsadrv2                                                  - ALSA driver C++ access library                                           
p   libdssialsacompat-dev                                          - DSSI ALSA compatibility library (development files)                      
p   libdssialsacompat0                                             - DSSI ALSA compatibility library for non-Linux platforms                  
p   libomxil-bellagio0-components-alsa                             - ALSA source/sink components for Bellagio OpenMAX IL                      
p   liboss4-salsa-asound2                                          - OSS to Alsa compatibility library - binary compatibility symlink         
p   liboss4-salsa2                                                 - OSS to Alsa compatibility library                                        
p   libsnack-alsa                                                  - Sound extension to Tcl/Tk and Python/Tkinter - ALSA files                
v   libsnack2-alsa                                                 -                                                                          
p   libsox-fmt-alsa                                                - SoX alsa format I/O library                                              
p   libzita-alsa-pcmi-dev                                          - Development files (headers) for libzita-alsa-pcmi library                
p   libzita-alsa-pcmi0                                             - C++ wrapper around the ALSA API                                          
p   liquidsoap-plugin-alsa                                         - audio streaming language -- ALSA plugin                                  
p   mopidy-alsamixer                                               - Mopidy extension for extension for ALSA volume control                   
p   osspd-alsa                                                     - OSS Proxy Daemon: ALSA backend (experimental)                            
p   python-alsaaudio                                               - Alsa bindings for Python                                                 
p   python-pyalsa                                                  - Official ALSA Python binding library                                     
v   python2.7-pyalsa                                               -                                                                          
v   snd-gtk-alsa                                                   -                                                                          
p   snd-nox-alsa                                                   - Sound file editor (dummy transitional package)                           
p   tuxguitar-alsa                                                 - tuxguitar plugin for sound playback using ALSA                           
i   volumeicon-alsa                                                - systray volume icon for alsa                                             
p   xmms2-plugin-alsa                                              - XMMS2 - ALSA output                                                      
p   zita-alsa-pcmi-utils                                           - Two simple demo programs zita-alsa-pcmi library                          
 
 12 Jun 17 @ 17:50:19 ~
   $

Any help getting ALSA working would be appreciated.

Last edited by Sector11 (2017-06-14 03:58:07)

Head_on_a_Stick · 2017-06-12 21:14:57

Sector11 wrote:

Any help getting ALSA working would be appreciated.

Try:

sudo apt purge pulseaudio
sudo mv /etc/asound.conf{,.bak}
sed -e '/bl-start-pulseaudio-x11/ s/^/#/' -i ~/.config/openbox/autostart

But can you please put PulseAudio back first so we can try to find out why it's not working?

Last edited by Head_on_a_Stick (2017-06-12 21:22:00)

Sector11 · 2017-06-12 22:58:34

 12 Jun 17 @ 19:44:00 ~
   $ sudo apt purge pulseaudio
[sudo] password for sector11: 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package 'pulseaudio' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
 
 12 Jun 17 @ 19:44:15 ~
   $ sudo mv /etc/asound.conf{,.bak}
mv: cannot stat ‘/etc/asound.conf’: No such file or directory
 
 12 Jun 17 @ 19:44:29 ~
   $ sed -e '/bl-start-pulseaudio-x11/ s/^/#/' -i ~/.config/openbox/autostart
 
 12 Jun 17 @ 19:44:42 ~
   $

That last line did nothing ... did you want to add something to my autostart?

 12 Jun 17 @ 19:52:52 ~
   $ sff *bl-start-pulseaudio-x11* /
[sudo] password for sector11: 
/usr/bin/bl-start-pulseaudio-x11
 
 12 Jun 17 @ 19:53:01 ~
   $

~/.config/openbox/autostart

## ====================
## More information about this can be found at:
## http://openbox.org/wiki/Help:Autostart

/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 &

### Keyboard Switcher ###
## Start keyboard with 3 language mapping by Omen
## setxkbmap -layout 'us,ua,ru' -option 'grp:alt_shift_toggle' &
## setxkbmap -layout 'latam,es' &
##(sleep 3s && fbxkb && setxkbmap latam,es) &
##(sleep 3s && fbxkb) &

## compose key for OB autostart
## compliments photonucleon
setxkbmap -option compose:menu &

### Start Thunar Daemon ###
thunar --daemon &

### NVIDIA Settings ###
##nvidia-settings -a [gpu:0]/GpuPowerMizerMode=1 &
##nvidia-settings -l

### sector11 style tint2 ###
# tint2 -c  ~/.config/tint2/tint2rc &

### Tint2 systray only ###
#tint2 -c ~/.config/tint2/t2-systrayrc &

### fbpanel ###
fbpanel -p s11-fbp &

### qasmixer ###
## qasmixer -t &  ## removed
volumeicon &

### Set desktop wallpaper ###
nitrogen --restore &

### Start Compton ###
### Basic Compositor ###
#(sleep 3s && compton -cC -G -b) &
### Less Basic Compositor ###
#(sleep 3s && compton -cC -fF -I 0.065 -O 0.065 -D 6 -m 0.8 -G -b) &
### Full Transparency Composite ###
#(sleep 1s && compton --config ~/.compton.conf) &
### Sector11 Style ###
#(sleep 1s && compton --config ~/.config/compton/compton.conf) &
###  Compton with no shadows ###
#compton --config ~/.config/compton/NS11.compton.conf &
### Compton with Shadows ###
compton --config ~/.config/compton/S11.compton.conf &

### xset stuff ###
### Turn on/off system beep ###
xset -b &
### Stop screen from going black ###
(xset -dpms && xset s off) &

### Mouse speed ###
### From anonymous »»   http://crunchbang.org/forums/viewtopic.php?id=1511 ###
### https://wiki.archlinux.org/index.php/Mouse_acceleration ###
#xset m 10/1 7 &
xset m 4/2 1 &

### set background colour ###
#xsetroot -solid "#2E3436" &
### Set root window colour ###
#hsetroot -solid "#2E3436" &

### Artha ###
(sleep 1s && artha) &

### Mount external drives ###
#From miwi - http://crunchbang.org/forums/viewtopic.php?pid=386444#p386444
#(gvfs-mount -d /dev/sda3 && gvfs-mount -d /dev/sdb1) &

### Start Conky after a slight delay ###
### ConkyZen ###
#(sleep 2s && bl-conky-session) &
### Start Other Conkys ###
#(sleep 6s && /media/5/Conky/convert/cad-us-ars.sh) &
#(sleep 2s && conky -c /media/5/Conky/S11_Get_Currency.conky) &
#(sleep 2s && /media/5/Conky/convert/1b1-accu_blue.sh) &

### THE Regular Conky ### hahahahahahahahahahahahahahahaha RIIIIIIIGHT!
#(sleep 2s && conky -c ~/.conkyrc) &
### Current Stuff ### lets start about 16 conkys ...
(sleep 4s && /media/5/Conky/OBMenuS/S11_Current.sh) &

exit

johnraff · 2017-06-13 00:42:27

^It looks as if you're using the Deuterium setup without the Deuterium openbox/autostart.
Some things were changed in autostart to make Pulse audio work, among other things.

You could try making a backup of your current ~/.config/openbox/autostart (presumably inherited from your previous system), copying /usr/share/bunsen/skel/.config/openbox/autostart to ~/.config/openbox/autostart, and reversing any system changes you made after installing Deuterium. If audio then works, then you can import any custom settings you need from your backed-up autostart.

If audio still doesn't work, then it would be interesting, to say the least, to find out why...

PackRat · 2017-06-13 00:50:23

@S11 - is this the computer that has the two soundcards in it that you were having sound issues with a while back?

Sector11 · 2017-06-13 01:09:30

johnraff wrote:

^It looks as if you're using the Deuterium setup without the Deuterium openbox/autostart.
Some things were changed in autostart to make Pulse audio work, among other things.
If audio still doesn't work, then it would be interesting, to say the least, to find out why...

OH MY! I've been using that "autostart" file since #! with no PA ... also through the last two years with BunsenLabs; no PA, but now it looks like a must.

So I copied the PulseAudio section in just above where it should be:

## Start PulseAudio
## (This replaces /etc/xdg/autostart/pulseaudio.desktop
## which is disabled by ~/.config/autostart/pulseaudio.desktop.)
## NOTE: PulseAudio must be started before volumeicon
bl-start-pulseaudio-x11

### qasmixer ###
## qasmixer -t &  ## removed
volumeicon &

Which at this point will not do anything as PA has been purged as stated in the OP.

What I wanted was ALSA working ... but let's see if we can get PA back in since that seems to be the way others want things to go.

 12 Jun 17 @ 22:06:46 ~
   $ get pulseaudio
[sudo] password for sector11: 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following package was automatically installed and is no longer required:
  libept1.4.12
Use 'apt-get autoremove' to remove it.
The following extra packages will be installed:
  libpulsedsp libwebrtc-audio-processing-0 pulseaudio-utils
Suggested packages:
  pavumeter pavucontrol paman paprefs avahi-daemon
Recommended packages:
  pulseaudio-module-x11 rtkit
The following NEW packages will be installed:
  libpulsedsp libwebrtc-audio-processing-0 pulseaudio pulseaudio-utils
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Need to get 1,176 kB of archives.
After this operation, 5,637 kB of additional disk space will be used.
Do you want to continue? [Y/n] 
Get:1 http://deb.debian.org/debian/ jessie/main libpulsedsp amd64 5.0-13 [38.4 kB]
Get:2 http://deb.debian.org/debian/ jessie/main libwebrtc-audio-processing-0 amd64 0.1-3 [97.8 kB]
Get:3 http://deb.debian.org/debian/ jessie/main pulseaudio-utils amd64 5.0-13 [68.4 kB]
Get:4 http://deb.debian.org/debian/ jessie/main pulseaudio amd64 5.0-13 [971 kB]
Fetched 1,176 kB in 3s (343 kB/s)   
Retrieving bug reports... Done
Parsing Found/Fixed information... Done
Selecting previously unselected package libpulsedsp:amd64.
(Reading database ... 145176 files and directories currently installed.)
Preparing to unpack .../libpulsedsp_5.0-13_amd64.deb ...
Unpacking libpulsedsp:amd64 (5.0-13) ...
Selecting previously unselected package libwebrtc-audio-processing-0:amd64.
Preparing to unpack .../libwebrtc-audio-processing-0_0.1-3_amd64.deb ...
Unpacking libwebrtc-audio-processing-0:amd64 (0.1-3) ...
Selecting previously unselected package pulseaudio-utils.
Preparing to unpack .../pulseaudio-utils_5.0-13_amd64.deb ...
Unpacking pulseaudio-utils (5.0-13) ...
Selecting previously unselected package pulseaudio.
Preparing to unpack .../pulseaudio_5.0-13_amd64.deb ...
Unpacking pulseaudio (5.0-13) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for dbus (1.8.22-0+deb8u1) ...
Setting up libpulsedsp:amd64 (5.0-13) ...
Setting up libwebrtc-audio-processing-0:amd64 (0.1-3) ...
Setting up pulseaudio-utils (5.0-13) ...
Setting up pulseaudio (5.0-13) ...
Adding user pulse to group audio
Processing triggers for libc-bin (2.19-18+deb8u9) ...
Processing triggers for dbus (1.8.22-0+deb8u1) ...
 
 12 Jun 17 @ 22:07:16 ~
   $

OK it's back will reboot shortly.

Sector11 · 2017-06-13 01:12:40

PackRat wrote:

@S11 - is this the computer that has the two soundcards in it that you were having sound issues with a while back?

WOW! Good memory, and Yes, the other card was a Soundblaster - it's fried. This is the onboard sound card and has been working like a champ!

   $ aud
Audio:     Card-1 NVIDIA MCP61 High Definition Audio driver: snd_hda_intel bus-ID: 00:05.0 chip-ID: 10de:03f0
           Card-2 NVIDIA High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 02:00.1 chip-ID: 10de:0be3
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64

johnraff · 2017-06-13 01:24:32

Sector11 wrote:

So I copied the PulseAudio section in just above where it should be

Could you, perhaps, just to make things simpler, temporarily copy in the whole autostart file from the path I posted above? (Of course, making a backup of your personal file.) It depends on other things, and the order they appear and so on. Having your personal settings in there will make it much harder to debug.

Once audio is fixed, then you can put back your custom settings, one at a time, making sure none of them break anything...

Sector11 · 2017-06-13 01:58:37

Not sure it's going to be simpler, there are things that don't apply here:

## Configure touchpad. See 'man synaptics' for more info.
synclient VertEdgeScroll=1 HorizEdgeScroll=1 TapButton1=1 2>/dev/null

## Disable touchpad while typing
syndaemon -i .5 -K -t -R -d &

## Start the battery applet
fdpowermon &

but done ... off to reboot

Sector11 · 2017-06-13 02:08:34

With the original autostart - no sound.

Sector11 · 2017-06-13 02:36:46

OK I have sound. None of the above worked. BUT, I thought of one little program I used with #!, it looked much nicer and followed the theme I was using so I installed it configured iit exactly the way I used then and BINGO - Sound

Purged PA and - Sound

Installed: qasmixer and configured it like this:

Now to reboot and see it it's still good.

EDIT: OH YES! Wonderful, clear, crisp ALSA sound!

Last edited by Sector11 (2017-06-13 02:42:06)

Head_on_a_Stick · 2017-06-13 06:53:24

^ If just installing qasmixer and fiddling with the settings fixed things then you *did* have working sound with ALSA before, it was just muted 8)

S11 wrote:

With the original autostart - no sound.

Yes, that's because you have deleted /etc/asound.conf

It would be great if you could re-install PulseAudio, make sure that the current autostart file is in use and then create a file at /etc/asound.conf with the following content:

pcm.pulse {
   type pulse
}
ctl.pulse {
   type pulse
}
pcm.!default {
   type pulse
}
ctl.!default {
   type pulse
}

The sound should then work after a reboot (you may have to fiddle with the volume levels and unmute the master channel).

johnraff · 2017-06-13 07:40:10

@S11 of course it's great that you have sound, but if you have the time to spare then it would be in the interest of the project if we could find out why it wasn't working with PA, and if there's anything we can do to make PA work, not just for you but maybe other users too.

Sector11 · 2017-06-13 17:50:16

OK, I'm in "s67"* an OOTB - BL-D install. Originally I had installed my ~/ to BL-D so yes that overwrote the openbox autostart file. Not the case here.

--- this post is basically an historical timeline of events that promped my OP.

This install has just a couple of tweaks to help me here, now:
stuff copied to ~/
- ~/bin (original was empty)
- ~/.bashrc --> nothing on the BL .bashrc concerns pulseaudio
- ~/.mozilla, and
- I installed inxi
- - - - ~/bin and ~/.bashrc gives me my aliases I am comfortable with and ~/.mozilla my FF setup and links. Other than that PURE OOTB BL-D

DEAD SILENCE!
VLC should be plauing one of the funniest records of all times. Look for it on YouTube - you will not be disappointed.

Clicked on the Volume Icon to see settings - never seen that program befor and went through all the config options: no sound.

So I installed alsamixergiu and the only thing it sees is "Pulse".

--- end of Historical timeline

So as per OP I ripped PA out of that install and tried what I did at #!. It still didn't work - until I installed qasmixer.

If you need more info I'll be happy to boot into s67 and have at it.

No Sound

=====
* s76
- "s" for "Sector11"
- "67" for the partitions this install uses:
- - - 6 = /
- - - 7 = /~

Last edited by Sector11 (2017-06-13 17:55:28)

Head_on_a_Stick · 2017-06-13 18:22:57

Please load up the BunsenLabs Deuterium live ISO image and post the output of these commands:

lspci -knn | grep -iA2 audio
cat /proc/asound/cards
aplay -l
amixer

EDIT: what the heck, let's see this as well:

dmesg

#oldskool

Last edited by Head_on_a_Stick (2017-06-13 18:27:02)

ector1935 · 2017-06-13 18:40:21

You can try this:
Installed alsa -tools
And give the following command:
hdajackretask
Select unconnected pin, and enable as photo, if it does not work, try other pins.
With me it worked and I have a snd_hda_intel

[url=http://i.imgur.com/ZGwEtqy.png]

[ettore@yoda-pc ~]$ lspci -knn | grep -iA2 audio
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
	Subsystem: Hewlett-Packard Company Device [103c:1818]
	Kernel driver in use: snd_hda_intel
[ettore@yoda-pc ~]$

[/url]

edit
Ah I forgot that you have to give:
Apply now
and
Install boot override and reboot, and act on pavucontrol or else

Last edited by ector1935 (2017-06-13 18:47:30)

Sector11 · 2017-06-13 21:14:20

Head_on_a_Stick wrote:

dmesg
#oldskool

Old school huh ... OK you asked for it....

No sound in BL-D Live DVD

==========================
user@debian:~$ lspci -knn | grep -iA2 audio
00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
	Subsystem: Elitegroup Computer Systems Device [1019:2242]
	Kernel driver in use: snd_hda_intel
--
02:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:2291]
	Kernel driver in use: snd_hda_intel
user@debian:~$ cat /proc/asound/cards
 0 [NVidia_1       ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xfce78000 irq 22
 1 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xfcf7c000 irq 19
user@debian:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia_1 [HDA NVidia], device 0: VT1705 Analog [VT1705 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia_1 [HDA NVidia], device 1: VT1705 Digital [VT1705 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia_1 [HDA NVidia], device 2: VT1705 Alt Analog [VT1705 Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
user@debian:~$ 
user@debian:~$ amixer
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 65536
  Mono:
  Front Left: Playback 29274 [45%] [on]
  Front Right: Playback 29274 [45%] [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch cswitch-joined
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 65536
  Front Left: Capture 10093 [15%] [on]
  Front Right: Capture 10093 [15%] [on]
user@debian:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.39-1+deb8u2 (2017-03-07)
[    0.000000] Command line: BOOT_IMAGE=/live/vmlinuz boot=live components quiet splash initrd=/live/initrd.img
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffbffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffc0000-0x00000000bffcdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffce000-0x00000000bffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: ECS MCP61M-M3/MCP61M-M3, BIOS 080015  11/03/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 00000001c0000000 aka 7168M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbffc0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bfe00000-0x1bfffffff]
[    0.000000]  [mem 0x1bfe00000-0x1bfffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bfdfffff]
[    0.000000]  [mem 0x1bc000000-0x1bfdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[    0.000000]  [mem 0x180000000-0x1bbffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbffbffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbffbffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x7e024000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAEE0 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000BFFC0000 000044 (v01 110310 RSDT1147 20101103 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BFFC0200 000084 (v01 110310 FACP1147 20101103 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BFFC04B0 00498A (v01 1AAAA  1AAAA000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BFFCE000 000040
[    0.000000] ACPI: APIC 0x00000000BFFC0390 000090 (v01 110310 APIC1147 20101103 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BFFC0420 00003C (v01 110310 OEMMCFG  20101103 MSFT 00000097)
[    0.000000] ACPI: WDRT 0x00000000BFFC0460 000047 (v01 110310 NV-WDRT  20101103 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BFFCE040 000072 (v01 110310 OEMB1147 20101103 MSFT 00000097)
[    0.000000] ACPI: SRAT 0x00000000BFFC4E40 0000D8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
[    0.000000] ACPI: HPET 0x00000000BFFC4F20 000038 (v01 110310 OEMHPET0 20101103 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BFFC4F60 000672 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x1bfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x1bfffffff] -> [mem 0x00000000-0x1bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1bfffffff]
[    0.000000]   NODE_DATA [mem 0x1bfff9000-0x1bfffdfff]
[    0.000000]  [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9600000-ffff8801be9fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1bfffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbffbffff]
[    0.000000]   node   0: [mem 0x100000000-0x1bfffffff]
[    0.000000] On node 0 totalpages: 1572702
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10696 pages used for memmap
[    0.000000]   DMA32 zone: 782272 pages, LIFO batch:31
[    0.000000]   Normal zone: 10752 pages used for memmap
[    0.000000]   Normal zone: 786432 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] smpboot: Allowing 6 CPUs, 3 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffc0000-0xbffcdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffce000-0xbffeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801bfc00000 s80960 r8192 d21440 u262144
[    0.000000] pcpu-alloc: s80960 r8192 d21440 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1551177
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/live/vmlinuz boot=live components quiet splash initrd=/live/initrd.img
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB)
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 6028328K/6290808K available (5247K kernel code, 947K rwdata, 1832K rodata, 1208K init, 840K bss, 262480K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS:33024 nr_irqs:728 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3214.591 MHz processor
[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.18 BogoMIPS (lpj=12858364)
[    0.000028] pid_max: default: 32768 minimum: 301
[    0.000035] ACPI: Core revision 20140424
[    0.002976] ACPI: All ACPI Tables successfully acquired
[    0.003002] Security Framework initialized
[    0.003009] AppArmor: AppArmor disabled by boot time parameter
[    0.003010] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.003426] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.006095] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007364] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.007373] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.007653] Initializing cgroup subsys memory
[    0.007658] Initializing cgroup subsys devices
[    0.007665] Initializing cgroup subsys freezer
[    0.007667] Initializing cgroup subsys net_cls
[    0.007671] Initializing cgroup subsys blkio
[    0.007675] Initializing cgroup subsys perf_event
[    0.007676] Initializing cgroup subsys net_prio
[    0.007696] tseg: 0000000000
[    0.007702] CPU: Physical Processor ID: 0
[    0.007703] CPU: Processor Core ID: 0
[    0.007705] mce: CPU supports 6 MCE banks
[    0.007709] LVT offset 0 assigned for vector 0xf9
[    0.007714] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.007783] Freeing SMP alternatives memory: 20K (ffffffff81a1c000 - ffffffff81a21000)
[    0.008764] ftrace: allocating 21702 entries in 85 pages
[    0.014719] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054462] smpboot: CPU0: AMD Athlon(tm) II X3 450 Processor (fam: 10, model: 05, stepping: 03)
[    0.162047] Performance Events: AMD PMU driver.
[    0.162051] ... version:                0
[    0.162052] ... bit width:              48
[    0.162053] ... generic registers:      4
[    0.162054] ... value mask:             0000ffffffffffff
[    0.162054] ... max period:             00007fffffffffff
[    0.162055] ... fixed-purpose events:   0
[    0.162056] ... event mask:             000000000000000f
[    0.163261] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.163356] x86: Booting SMP configuration:
[    0.163357] .... node  #0, CPUs:      #1
[    0.176406] TSC synchronization [CPU#0 -> CPU#1]:
[    0.176408] Measured 38260147522 cycles TSC warp between CPUs, turning off TSC clock.
[    0.176410] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.176525]  #2
[    0.187575] x86: Booted up 1 node, 3 CPUs
[    0.187577] smpboot: Total of 3 processors activated (19287.54 BogoMIPS)
[    0.084279] devtmpfs: initialized
[    0.088057] PM: Registering ACPI NVS region [mem 0xbffce000-0xbffeffff] (139264 bytes)
[    0.088999] pinctrl core: initialized pinctrl subsystem
[    0.089080] NET: Registered protocol family 16
[    0.089192] cpuidle: using governor ladder
[    0.089194] cpuidle: using governor menu
[    0.089199] node 0 link 0: io port [1000, ffffff]
[    0.089201] TOM: 00000000c0000000 aka 3072M
[    0.089202] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.089204] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.089206] node 0 link 0: mmio [a0000, bffff]
[    0.089208] node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff]
[    0.089210] TOM2: 00000001c0000000 aka 7168M
[    0.089211] bus: [bus 00-07] on node 0 link 0
[    0.089213] bus: 00 [io  0x0000-0xffff]
[    0.089214] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.089215] bus: 00 [mem 0xc0000000-0xdfffffff]
[    0.089215] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.089216] bus: 00 [mem 0x1c0000000-0xfcffffffff]
[    0.089277] ACPI: bus type PCI registered
[    0.089279] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.089362] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.089364] PCI: not using MMCONFIG
[    0.089365] PCI: Using configuration type 1 for base access
[    0.089366] PCI: Using configuration type 1 for extended access
[    0.100095] ACPI: Added _OSI(Module Device)
[    0.100095] ACPI: Added _OSI(Processor Device)
[    0.100095] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.100095] ACPI: Added _OSI(Processor Aggregator Device)
[    0.101197] ACPI: Executed 1 blocks of module-level executable AML code
[    0.104489] ACPI: Interpreter enabled
[    0.104493] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.104496] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.104506] ACPI: (supports S0 S3 S4 S5)
[    0.104508] ACPI: Using IOAPIC for interrupt routing
[    0.104523] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.105301] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.105655] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.109798] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.109804] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.109979] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.110170] PCI host bridge to bus 0000:00
[    0.110172] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.110174] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.110176] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.110177] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.110179] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.110180] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.110182] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.110202] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[    0.110408] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[    0.110414] pci 0000:00:01.0: reg 0x10: [io  0x4f00-0x4fff]
[    0.110482] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.110491] pci 0000:00:01.1: reg 0x10: [io  0x4900-0x493f]
[    0.110504] pci 0000:00:01.1: reg 0x20: [io  0x4d00-0x4d3f]
[    0.110509] pci 0000:00:01.1: reg 0x24: [io  0x4e00-0x4e3f]
[    0.110534] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.110561] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.110591] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.110654] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.110662] pci 0000:00:02.0: reg 0x10: [mem 0xfce7f000-0xfce7ffff]
[    0.110691] pci 0000:00:02.0: supports D1 D2
[    0.110693] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110713] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.110746] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.110754] pci 0000:00:02.1: reg 0x10: [mem 0xfce7ec00-0xfce7ecff]
[    0.110790] pci 0000:00:02.1: supports D1 D2
[    0.110792] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.110814] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.110851] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.110892] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.110925] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[    0.110934] pci 0000:00:05.0: reg 0x10: [mem 0xfce78000-0xfce7bfff]
[    0.110970] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.110992] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.111029] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.111048] pci 0000:00:06.0: reg 0x20: [io  0xffa0-0xffaf]
[    0.111056] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.111058] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.111059] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.111060] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.111115] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[    0.111123] pci 0000:00:07.0: reg 0x10: [mem 0xfce7d000-0xfce7dfff]
[    0.111126] pci 0000:00:07.0: reg 0x14: [io  0xd480-0xd487]
[    0.111155] pci 0000:00:07.0: supports D1 D2
[    0.111157] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111180] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.111212] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.111218] pci 0000:00:08.0: reg 0x10: [io  0xd400-0xd407]
[    0.111222] pci 0000:00:08.0: reg 0x14: [io  0xd080-0xd083]
[    0.111225] pci 0000:00:08.0: reg 0x18: [io  0xd000-0xd007]
[    0.111228] pci 0000:00:08.0: reg 0x1c: [io  0xcc00-0xcc03]
[    0.111231] pci 0000:00:08.0: reg 0x20: [io  0xc880-0xc88f]
[    0.111235] pci 0000:00:08.0: reg 0x24: [mem 0xfce7c000-0xfce7cfff]
[    0.111293] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[    0.111299] pci 0000:00:08.1: reg 0x10: [io  0xc800-0xc807]
[    0.111303] pci 0000:00:08.1: reg 0x14: [io  0xc480-0xc483]
[    0.111306] pci 0000:00:08.1: reg 0x18: [io  0xc400-0xc407]
[    0.111309] pci 0000:00:08.1: reg 0x1c: [io  0xc080-0xc083]
[    0.111312] pci 0000:00:08.1: reg 0x20: [io  0xc000-0xc00f]
[    0.111316] pci 0000:00:08.1: reg 0x24: [mem 0xfce77000-0xfce77fff]
[    0.111379] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.111402] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111424] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.111457] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.111478] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111499] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.111532] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[    0.111555] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.111576] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.111614] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.111662] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.111705] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.111749] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.111795] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.111891] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.111895] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.111897] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.111898] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.111900] pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.111901] pci 0000:00:04.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.111903] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.111936] pci 0000:02:00.0: [10de:0a65] type 00 class 0x030000
[    0.111944] pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.111952] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.111959] pci 0000:02:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[    0.111964] pci 0000:02:00.0: reg 0x24: [io  0xec00-0xec7f]
[    0.111969] pci 0000:02:00.0: reg 0x30: [mem 0xfcf80000-0xfcffffff pref]
[    0.112039] pci 0000:02:00.1: [10de:0be3] type 00 class 0x040300
[    0.112047] pci 0000:02:00.1: reg 0x10: [mem 0xfcf7c000-0xfcf7ffff]
[    0.120024] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.120030] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.120032] pci 0000:00:09.0:   bridge window [mem 0xfcf00000-0xfdffffff]
[    0.120035] pci 0000:00:09.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.120084] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.120118] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.120121] pci 0000:00:0c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
[    0.120131] pci_bus 0000:00: on NUMA node 0
[    0.120739] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.120815] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.120887] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.120958] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.121031] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *5
[    0.121101] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.121172] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.121245] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.121318] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.121390] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.121463] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.121536] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
[    0.121606] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.121679] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.121751] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[    0.121827] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[    0.121899] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[    0.121979] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.122022] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.122116] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.122116] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.122116] vgaarb: loaded
[    0.122116] vgaarb: bridge control possible 0000:02:00.0
[    0.122116] PCI: Using ACPI for IRQ routing
[    0.128031] PCI: pci_cache_line_size set to 64 bytes
[    0.128061] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.128062] e820: reserve RAM buffer [mem 0xbffc0000-0xbfffffff]
[    0.128177] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.128182] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.128185] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.130216] Switched to clocksource hpet
[    0.133058] pnp: PnP ACPI init
[    0.133069] ACPI: bus type PNP registered
[    0.133156] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.133330] pnp 00:01: [dma 0 disabled]
[    0.133373] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.133719] pnp 00:02: [dma 3]
[    0.133801] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.134098] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.134101] system 00:03: [io  0x0800-0x080f] has been reserved
[    0.134103] system 00:03: [io  0x4000-0x407f] has been reserved
[    0.134104] system 00:03: [io  0x4080-0x40ff] has been reserved
[    0.134106] system 00:03: [io  0x4400-0x447f] has been reserved
[    0.134108] system 00:03: [io  0x4480-0x44ff] has been reserved
[    0.134109] system 00:03: [io  0x4800-0x487f] has been reserved
[    0.134111] system 00:03: [io  0x4880-0x48ff] has been reserved
[    0.134112] system 00:03: [io  0x4c00-0x4c7f] has been reserved
[    0.134114] system 00:03: [io  0x4c80-0x4cff] has been reserved
[    0.134116] system 00:03: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.134118] system 00:03: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.134120] system 00:03: [mem 0x000de000-0x000dffff window] has been reserved
[    0.134122] system 00:03: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[    0.134124] system 00:03: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.134125] system 00:03: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.134127] system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.134129] system 00:03: [mem 0xffb80000-0xffffffff] could not be reserved
[    0.134131] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134227] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.134228] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.134230] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134275] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.134366] system 00:06: [io  0x0a00-0x0adf] has been reserved
[    0.134368] system 00:06: [io  0x0ae0-0x0aef] has been reserved
[    0.134370] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134426] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.134428] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134551] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.134553] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.134554] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.134556] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.134558] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.134560] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.134745] pnp: PnP ACPI: found 9 devices
[    0.134746] ACPI: bus type PNP unregistered
[    0.141426] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.141433] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.141435] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.141437] pci 0000:00:09.0:   bridge window [mem 0xfcf00000-0xfdffffff]
[    0.141440] pci 0000:00:09.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.141442] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.141446] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.141448] pci 0000:00:0c.0:   bridge window [mem 0xfe000000-0xfe0fffff]
[    0.141451] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.141452] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.141454] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.141455] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.141457] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.141458] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.141460] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.141461] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.141462] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.141464] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.141465] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.141466] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.141468] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.141469] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfdffffff]
[    0.141471] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.141472] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe0fffff]
[    0.141544] NET: Registered protocol family 2
[    0.141790] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.141985] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.142305] TCP: Hash tables configured (established 65536 bind 65536)
[    0.142358] TCP: reno registered
[    0.142369] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.142424] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.142567] NET: Registered protocol family 1
[    0.142815] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.220274] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.220374] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.220417] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.220469] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.220519] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.220568] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.220622] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.220678] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.220737] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.220753] pci 0000:02:00.0: Video device with shadowed ROM
[    0.220760] PCI: CLS 64 bytes, default 64
[    0.220812] Unpacking initramfs...
[    0.638205] Freeing initrd memory: 32624K (ffff88007e024000 - ffff880080000000)
[    0.638387] PCI-DMA: Disabling AGP.
[    0.638469] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    0.638470] PCI-DMA: using GART IOMMU.
[    0.638473] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.640845] microcode: CPU0: patch_level=0x010000b6
[    0.640865] microcode: CPU1: patch_level=0x010000b6
[    0.640874] microcode: CPU2: patch_level=0x010000b6
[    0.640980] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.640998] LVT offset 1 assigned for vector 0x400
[    0.641025] IBS: LVT offset 1 assigned
[    0.641056] perf: AMD IBS detected (0x0000001f)
[    0.641365] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.641418] audit: initializing netlink subsys (disabled)
[    0.641433] audit: type=2000 audit(1497387264.640:1): initialized
[    0.641862] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.641884] zbud: loaded
[    0.642110] VFS: Disk quotas dquot_6.5.2
[    0.642132] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.642176] msgmni has been set to 11966
[    0.642766] alg: No test for stdrng (krng)
[    0.642814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.642891] io scheduler noop registered
[    0.642894] io scheduler deadline registered
[    0.642931] io scheduler cfq registered (default)
[    0.643024] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    0.643078] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    0.643121] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    0.643183] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[    0.643185] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.643186] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    0.643188] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[    0.643198] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    0.643200] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    0.643210] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    0.643212] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    0.643225] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.643239] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.643283] GHES: HEST is not enabled!
[    0.643369] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.663699] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.664237] Linux agpgart interface v0.103
[    0.664322] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.664323] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.664477] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.664610] mousedev: PS/2 mouse device common for all mice
[    0.664656] rtc_cmos 00:00: RTC can wake from S4
[    0.664835] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    0.664872] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.664885] ledtrig-cpu: registered to indicate activity on CPUs
[    0.665197] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.665198] AMD IOMMUv2 functionality not available on this system
[    0.665275] TCP: cubic registered
[    0.665340] NET: Registered protocol family 10
[    0.665557] mip6: Mobile IPv6
[    0.665560] NET: Registered protocol family 17
[    0.665565] mpls_gso: MPLS GSO support
[    0.665913] registered taskstats version 1
[    0.666338] rtc_cmos 00:00: setting system clock to 2017-06-13 20:54:25 UTC (1497387265)
[    0.666418] PM: Hibernation image not present or could not be loaded.
[    0.667353] Freeing unused kernel memory: 1208K (ffffffff818ee000 - ffffffff81a1c000)
[    0.667357] Write protecting the kernel read-only data: 8192k
[    0.667764] Freeing unused kernel memory: 884K (ffff880001523000 - ffff880001600000)
[    0.668253] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    0.680288] systemd-udevd[66]: starting version 215
[    0.680620] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.681318] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.693118] ACPI: bus type USB registered
[    0.693159] usbcore: registered new interface driver usbfs
[    0.693174] usbcore: registered new interface driver hub
[    0.693256] usbcore: registered new device driver usb
[    0.693310] SCSI subsystem initialized
[    0.694822] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.695018] ehci-pci: EHCI PCI platform driver
[    0.695127] ehci-pci 0000:00:02.1: EHCI Host Controller
[    0.695133] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.695144] ehci-pci 0000:00:02.1: debug port 1
[    0.695175] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    0.695194] ehci-pci 0000:00:02.1: irq 22, io mem 0xfce7ec00
[    0.695203] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.696000] thermal LNXTHERM:00: registered as thermal_zone0
[    0.696020] ACPI: Thermal Zone [THRM] (30 C)
[    0.696624] libata version 3.00 loaded.
[    0.704089] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.704178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.704180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.704182] usb usb1: Product: EHCI Host Controller
[    0.704183] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.704184] usb usb1: SerialNumber: 0000:00:02.1
[    0.704484] hub 1-0:1.0: USB hub found
[    0.704491] hub 1-0:1.0: 10 ports detected
[    0.704809] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.704917] ohci-pci: OHCI PCI platform driver
[    0.705006] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[    1.228759] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 10:78:d2:20:d7:9a
[    1.228763] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    1.228819] pata_amd 0000:00:06.0: version 0.4.1
[    1.229608] scsi0 : pata_amd
[    1.229808] scsi1 : pata_amd
[    1.229878] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.229880] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.229914] sata_nv 0000:00:08.0: version 3.5
[    1.230103] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    1.230560] scsi2 : sata_nv
[    1.230728] scsi3 : sata_nv
[    1.230802] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
[    1.230804] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
[    1.231006] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[    1.231375] scsi4 : sata_nv
[    1.231566] scsi5 : sata_nv
[    1.231635] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23
[    1.231636] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23
[    1.231772] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.231778] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.231801] ohci-pci 0000:00:02.0: irq 23, io mem 0xfce7f000
[    1.286114] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.286118] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.286119] usb usb2: Product: OHCI PCI host controller
[    1.286121] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    1.286122] usb usb2: SerialNumber: 0000:00:02.0
[    1.286274] hub 2-0:1.0: USB hub found
[    1.286281] hub 2-0:1.0: 10 ports detected
[    1.392339] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H10L, LL12, max UDMA/33
[    1.392346] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[    1.408269] ata1.00: configured for UDMA/33
[    1.414086] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10L  LL12 PQ: 0 ANSI: 5
[    1.421666] ata2: port disabled--ignoring
[    1.550271] ata3: SATA link down (SStatus 0 SControl 300)
[    1.550275] ata5: SATA link down (SStatus 0 SControl 300)
[    1.660046] usb 2-3: new low-speed USB device number 2 using ohci-pci
[    1.870092] usb 2-3: New USB device found, idVendor=15d9, idProduct=0a4f
[    1.870095] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.870097] usb 2-3: Product:  USB OPTICAL MOUSE
[    1.874087] hidraw: raw HID events driver (C) Jiri Kosina
[    1.880273] usbcore: registered new interface driver usbhid
[    1.880276] usbhid: USB HID core driver
[    1.881021] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:15D9:0A4F.0001/input/input1
[    1.881090] hid-generic 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:02.0-3/input0
[    2.016066] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.024937] ata4.00: ATA-8: WDC WD5000AAKX-22ERMA0, 17.01H17, max UDMA/133
[    2.024941] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.040949] ata4.00: configured for UDMA/133
[    2.041136] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-2 1H17 PQ: 0 ANSI: 5
[    2.048046] usb 2-4: new full-speed USB device number 3 using ohci-pci
[    2.287092] usb 2-4: New USB device found, idVendor=04f9, idProduct=0054
[    2.287095] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.287097] usb 2-4: Product: HL-1110 series
[    2.287098] usb 2-4: Manufacturer: Brother
[    2.287099] usb 2-4: SerialNumber: F4N936063
[    2.362262] ata6: SATA link down (SStatus 0 SControl 300)
[    2.368147] sr0: scsi3-mmc drive: 102x/102x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.368152] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.368336] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.368919] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.369067] scsi 3:0:0:0: Attached scsi generic sg1 type 0
[    2.377686] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.377862] sd 3:0:0:0: [sda] Write Protect is off
[    2.377867] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.377988] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.479152]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    2.480178] sd 3:0:0:0: [sda] Attached SCSI disk
[    3.504117] random: nonblocking pool is initialized
[    3.712088] floppy0: no floppy controllers found
[    4.270432] ISO 9660 Extensions: Microsoft Joliet Level 3
[    4.306751] ISO 9660 Extensions: RRIP_1991A
[    4.345690] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[    4.346512] aufs 3.16-20140908+setfl
[    4.355538] loop: module loaded
[    4.711934] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   12.856087] floppy0: no floppy controllers found
[   15.031799] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[   15.031933] systemd[1]: Detected architecture 'x86-64'.
[   16.209707] systemd[1]: Inserted module 'autofs4'
[   16.212648] systemd[1]: Set hostname to <localhost.localdomain>.
[   16.212956] systemd[1]: Initializing machine ID from random generator.
[   17.125962] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   17.126031] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   17.126044] systemd[1]: Starting Remote File Systems (Pre).
[   17.126067] systemd[1]: Reached target Remote File Systems (Pre).
[   17.126089] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   17.126113] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   17.126122] systemd[1]: Starting Paths.
[   17.126130] systemd[1]: Reached target Paths.
[   17.126155] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   17.126228] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   17.126240] systemd[1]: Starting Encrypted Volumes.
[   17.126249] systemd[1]: Reached target Encrypted Volumes.
[   17.126257] systemd[1]: Starting Swap.
[   17.126265] systemd[1]: Reached target Swap.
[   17.126274] systemd[1]: Starting Root Slice.
[   17.126296] systemd[1]: Created slice Root Slice.
[   17.126305] systemd[1]: Starting User and Session Slice.
[   17.126334] systemd[1]: Created slice User and Session Slice.
[   17.126344] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   17.126373] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   17.126382] systemd[1]: Starting Delayed Shutdown Socket.
[   17.126405] systemd[1]: Listening on Delayed Shutdown Socket.
[   17.126414] systemd[1]: Starting Journal Socket (/dev/log).
[   17.126437] systemd[1]: Listening on Journal Socket (/dev/log).
[   17.126450] systemd[1]: Starting udev Control Socket.
[   17.126467] systemd[1]: Listening on udev Control Socket.
[   17.126478] systemd[1]: Starting udev Kernel Socket.
[   17.126495] systemd[1]: Listening on udev Kernel Socket.
[   17.126510] systemd[1]: Starting Journal Socket.
[   17.126534] systemd[1]: Listening on Journal Socket.
[   17.126555] systemd[1]: Starting System Slice.
[   17.126582] systemd[1]: Created slice System Slice.
[   17.126592] systemd[1]: Starting system-getty.slice.
[   17.126633] systemd[1]: Created slice system-getty.slice.
[   17.126653] systemd[1]: Starting Increase datagram queue length...
[   17.127092] systemd[1]: Mounting Huge Pages File System...
[   17.127531] systemd[1]: Mounting POSIX Message Queue File System...
[   17.131060] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   17.131562] systemd[1]: Mounting Debug File System...
[   17.439348] systemd[1]: Started Set Up Additional Binary Formats.
[   17.439420] systemd[1]: Starting live-config contains the components that configure a live system during the boot process (late userspace)....
[   17.735574] systemd[1]: Starting Load Kernel Modules...
[   17.736071] systemd[1]: Starting udev Coldplug all Devices...
[   17.736551] systemd[1]: Starting Slices.
[   17.736568] systemd[1]: Reached target Slices.
[   17.737376] systemd[1]: Started Increase datagram queue length.
[   17.737611] systemd[1]: Starting Syslog Socket.
[   17.737650] systemd[1]: Listening on Syslog Socket.
[   17.737669] systemd[1]: Starting Journal Service...
[   17.738174] systemd[1]: Started Journal Service.
[   20.401061] fuse init (API version 7.23)
[   40.825539] systemd-udevd[558]: starting version 215
[   42.095994] systemd-journald[278]: Received request to flush runtime journal from PID 1
[   44.229723] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   44.229729] ACPI: Power Button [PWRB]
[   44.229782] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   44.229784] ACPI: Power Button [PWRF]
[   45.195595] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   45.608937] acpi-cpufreq: overriding BIOS provided _PSD data
[   46.005267] parport_pc 00:02: reported by Plug and Play ACPI
[   46.005377] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   46.156956] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[   46.156985] i2c i2c-1: nForce2 SMBus adapter at 0x4e00
[   47.460205] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   48.639762] EDAC MC: Ver: 3.0.0
[   48.814294] MCE: In-kernel MCE decoding enabled.
[   48.818046] AMD64 EDAC driver v3.4.0
[   48.818082] EDAC amd64: DRAM ECC disabled.
[   48.818088] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[   49.551769] ppdev: user-space parallel port driver
[   50.791180] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   50.791196] snd_hda_intel 0000:00:05.0: Disabling MSI
[   50.791466] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
[   50.791484] snd_hda_intel 0000:02:00.1: Disabling MSI
[   50.791492] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[   51.652100] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[   51.652114] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   51.652126] sound hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[   51.652132] sound hdaudioC0D0:    mono: mono_out=0x0
[   51.652137] sound hdaudioC0D0:    dig-out=0x20/0x0
[   51.652141] sound hdaudioC0D0:    inputs:
[   51.652147] sound hdaudioC0D0:      Rear Mic=0x1a
[   51.652153] sound hdaudioC0D0:      Front Mic=0x1e
[   51.652158] sound hdaudioC0D0:      Line=0x1b
[   51.652163] sound hdaudioC0D0:      CD=0x1f
[   51.838061] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input5
[   51.853534] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input6
[   51.855338] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input7
[   51.855447] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input8
[   52.216114] floppy0: no floppy controllers found
[   52.433047] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   52.433255] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   52.433449] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[   52.433618] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[   52.433784] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[   53.121415] usblp 2-4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0054
[   53.121482] usbcore: registered new interface driver usblp
[   53.866623] [drm] Initialized drm 1.1.0 20060810
[   55.064345] wmi: Mapper loaded
[   57.940680] kvm: Nested Virtualization enabled
[   57.940696] kvm: Nested Paging enabled
[   62.227465] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
[   62.227657] nouveau  [  DEVICE][0000:02:00.0] BOOT0  : 0x0a8280b1
[   62.227660] nouveau  [  DEVICE][0000:02:00.0] Chipset: GT218 (NVA8)
[   62.227662] nouveau  [  DEVICE][0000:02:00.0] Family : NV50
[   62.227691] nouveau  [   VBIOS][0000:02:00.0] checking PRAMIN for image...
[   62.292015] nouveau  [   VBIOS][0000:02:00.0] ... appears to be valid
[   62.292017] nouveau  [   VBIOS][0000:02:00.0] using image from PRAMIN
[   62.292163] nouveau  [   VBIOS][0000:02:00.0] BIT signature found
[   62.292166] nouveau  [   VBIOS][0000:02:00.0] version 70.18.5e.00.00
[   62.293234] nouveau 0000:02:00.0: irq 43 for MSI/MSI-X
[   62.293257] nouveau  [     PMC][0000:02:00.0] MSI interrupts enabled
[   62.293312] nouveau  [     PFB][0000:02:00.0] RAM type: DDR3
[   62.293318] nouveau  [     PFB][0000:02:00.0] RAM size: 1024 MiB
[   62.293323] nouveau  [     PFB][0000:02:00.0]    ZCOMP: 960 tags
[   62.295413] nouveau  [    VOLT][0000:02:00.0] GPU voltage: 900000uv
[   63.588035] nouveau  [  PTHERM][0000:02:00.0] FAN control: none / external
[   63.588046] nouveau  [  PTHERM][0000:02:00.0] fan management: automatic
[   63.588049] nouveau  [  PTHERM][0000:02:00.0] internal sensor: yes
[   63.588072] nouveau  [     CLK][0000:02:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[   63.588075] nouveau  [     CLK][0000:02:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[   63.588078] nouveau  [     CLK][0000:02:00.0] 0f: core 589 MHz shader 1402 MHz memory 500 MHz
[   63.588094] nouveau  [     CLK][0000:02:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[   63.588351] [TTM] Zone  kernel: Available graphics memory: 3064616 kiB
[   63.588354] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   63.588355] [TTM] Initializing pool allocator
[   63.588361] [TTM] Initializing DMA pool allocator
[   63.588376] nouveau  [     DRM] VRAM: 1024 MiB
[   63.588377] nouveau  [     DRM] GART: 1048576 MiB
[   63.588381] nouveau  [     DRM] TMDS table version 2.0
[   63.588383] nouveau  [     DRM] DCB version 4.0
[   63.588385] nouveau  [     DRM] DCB outp 00: 01000302 00020030
[   63.588386] nouveau  [     DRM] DCB outp 01: 02000300 00000000
[   63.588388] nouveau  [     DRM] DCB outp 02: 02011362 00020010
[   63.588389] nouveau  [     DRM] DCB outp 03: 01022310 00000000
[   63.588390] nouveau  [     DRM] DCB conn 00: 00001030
[   63.588392] nouveau  [     DRM] DCB conn 01: 00002161
[   63.588393] nouveau  [     DRM] DCB conn 02: 00000200
[   63.594392] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   63.594393] [drm] Driver supports precise vblank timestamp query.
[   63.600843] nouveau  [     DRM] MM: using COPY for buffer copies
[   63.670610] nouveau  [     DRM] allocated 1920x1080 fb: 0x70000, bo ffff8801b39f8000
[   63.670905] fbcon: nouveaufb (fb0) is primary device
[   63.741513] Console: switching to colour frame buffer device 240x67
[   63.744625] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[   63.744628] nouveau 0000:02:00.0: registered panic notifier
[   63.764180] [drm] Initialized nouveau 1.1.2 20120801 for 0000:02:00.0 on minor 0
[   69.854493] cfg80211: Calling CRDA to update world regulatory domain
[   70.705313] cfg80211: World regulatory domain updated:
[   70.705318] cfg80211:  DFS Master region: unset
[   70.705320] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   70.705323] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   70.705325] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   70.705327] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   70.705329] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   70.705331] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   70.705333] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   70.705334] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   70.705336] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   70.845070] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X
[   70.845101] forcedeth 0000:00:07.0 eth0: MSI enabled
[  155.475403] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
user@debian:~$

Sector11 · 2017-06-13 21:23:34

ector1935 wrote:

Install boot override and reboot, and act on pavucontrol or else

I'm guessing this is with PulseAudio because of the "pavucontrol" you mentioned?

I have removed PA.

But that looks good. and a tweak to keep! I clicked on show unconnected pins and they all showed up.
Interesting - because I now have sound.

Head_on_a_Stick · 2017-06-13 21:30:18

Sector11 wrote:

No sound in BL-D Live DVD

Please open up pavucontrol and select the second analogue card as the default output (in the "Output Devices" tab) to see if that produces sound.

Please also post the output of

cat /proc/asound/cards
aplay -l
amixer

From your system with qasmixer and working sound.

Sector11 · 2017-06-14 03:48:45

Head_on_a_Stick wrote:

Sector11 wrote:
No sound in BL-D Live DVD
Please open up pavucontrol and select the second analogue card as the default output (in the "Output Devices" tab) to see if that produces sound.

Done. No sound - tried every possible combination.

HoaS wrote:

Please also post the output of
cat /proc/asound/cards
aplay -l
amixer
From your system with qasmixer and working sound.

 14 Jun 17 @ 00:36:51 ~
   $ sys
System:    Host: s12 Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.2
           Distro: BunsenLabs 8.7 bunsen-hydrogen
 
 14 Jun 17 @ 00:36:55 ~
   $ cat /proc/asound/cards
 0 [NVidia_1       ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xfce78000 irq 22
 1 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xfcf7c000 irq 18
 
 14 Jun 17 @ 00:37:17 ~
   $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia_1 [HDA NVidia], device 0: VT1705 Analog [VT1705 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia_1 [HDA NVidia], device 1: VT1705 Digital [VT1705 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia_1 [HDA NVidia], device 2: VT1705 Alt Analog [VT1705 Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
 
 14 Jun 17 @ 00:37:41 ~
   $ amixer
Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 42
  Mono: Playback 39 [93%] [-4.50dB] [on]
Simple mixer control 'Headphone',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 42
  Mono:
  Front Left: Playback 0 [0%] [-63.00dB] [on]
  Front Right: Playback 0 [0%] [-63.00dB] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB]
  Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 42
  Mono:
  Front Left: Playback 0 [0%] [-63.00dB] [on]
  Front Right: Playback 0 [0%] [-63.00dB] [on]
Simple mixer control 'Front Mic',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 31
  Mono: Capture [off]
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Front Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Surround',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 42
  Mono:
  Front Left: Playback 0 [0%] [-63.00dB] [on]
  Front Right: Playback 0 [0%] [-63.00dB] [on]
Simple mixer control 'Center',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 42
  Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
  Playback channels: Mono
  Limits: Playback 0 - 42
  Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 31
  Mono: Capture [off]
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'CD',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 31
  Mono: Capture [off]
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 31
  Front Left: Capture 0 [0%] [-16.50dB] [off]
  Front Right: Capture 0 [0%] [-16.50dB] [off]
Simple mixer control 'Auto-Mute Mode',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Disabled'
Simple mixer control 'Channel Mode',0
  Capabilities: enum
  Items: '2ch' '4ch' '6ch'
  Item0: '6ch'
Simple mixer control 'Dynamic Power-Control',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Independent HP',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Loopback Mixing',0
  Capabilities: enum
  Items: 'Disabled' 'Enabled'
  Item0: 'Enabled'
Simple mixer control 'Rear Mic',0
  Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Playback channels: Front Left - Front Right
  Capture channels: Mono
  Limits: Playback 0 - 31
  Mono: Capture [off]
  Front Left: Playback 0 [0%] [-34.50dB] [off]
  Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Rear Mic Boost',0
  Capabilities: volume
  Playback channels: Front Left - Front Right
  Capture channels: Front Left - Front Right
  Limits: 0 - 3
  Front Left: 0 [0%] [0.00dB]
  Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Stereo Mix',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [on]
 
 14 Jun 17 @ 00:38:29 ~
   $

Something you asked for from the "Live" system but not here ... sooooooo

 14 Jun 17 @ 00:46:16 ~
   $ lspci -knn | grep -iA2 audio
00:05.0 Audio device [0403]: NVIDIA Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
	Subsystem: Elitegroup Computer Systems Device [1019:2242]
	Kernel driver in use: snd_hda_intel
--
02:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
	Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:2291]
	Kernel driver in use: snd_hda_intel
 
 14 Jun 17 @ 00:46:26 ~
   $

#1 2017-06-12 21:01:24

[Solved] No sound with Pulse Audio

#2 2017-06-12 21:14:57

Re: [Solved] No sound with Pulse Audio

#3 2017-06-12 22:58:34

Re: [Solved] No sound with Pulse Audio

#4 2017-06-13 00:42:27

Re: [Solved] No sound with Pulse Audio

#5 2017-06-13 00:50:23

Re: [Solved] No sound with Pulse Audio

#6 2017-06-13 01:09:30

Re: [Solved] No sound with Pulse Audio

#7 2017-06-13 01:12:40

Re: [Solved] No sound with Pulse Audio

#8 2017-06-13 01:24:32

Re: [Solved] No sound with Pulse Audio

#9 2017-06-13 01:58:37

Re: [Solved] No sound with Pulse Audio

#10 2017-06-13 02:08:34

Re: [Solved] No sound with Pulse Audio

#11 2017-06-13 02:36:46

Re: [Solved] No sound with Pulse Audio

#12 2017-06-13 06:53:24

Re: [Solved] No sound with Pulse Audio

#13 2017-06-13 07:40:10

Re: [Solved] No sound with Pulse Audio

#14 2017-06-13 17:50:16

Re: [Solved] No sound with Pulse Audio

#15 2017-06-13 18:22:57

Re: [Solved] No sound with Pulse Audio

#16 2017-06-13 18:40:21

Re: [Solved] No sound with Pulse Audio

#17 2017-06-13 21:14:20

Re: [Solved] No sound with Pulse Audio

#18 2017-06-13 21:23:34

Re: [Solved] No sound with Pulse Audio

#19 2017-06-13 21:30:18

Re: [Solved] No sound with Pulse Audio

#20 2017-06-14 03:48:45

Re: [Solved] No sound with Pulse Audio

Board footer