You are not logged in.

#1551 2017-05-04 19:38:58

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

@ ector1935

sudo apt-get install hddtemp

Then reconfigure hddtemp

sudo dpkg-reconfigure hddtemp

Answers: No, 0, Yes, OK, OK

Now use it in a conky without -n or sudo

${hddtemp /dev/sda}°

In a terminal:

 04 May 17 @ 16:33:42 ~
  $ hddtemp /dev/sda
/dev/sda: WDC WD5000AAKX-22ERMA0: 38°C
 
 04 May 17 @ 16:33:45 ~
  $ 

It's already in your conky so no conky work needed.

Looks GOOD!  And I see Intel reports ${freq X} for the threads too, Good to know.
and You're welcome.


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1552 2017-05-05 07:43:41

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Hi guys,
Sorry if it still disturbs,but I noticed that the 4th day does not display the correct minimum temperature,you know if it can be resolved,or it's a bug.
thanks for everything

2017-05-05-093959_251x176_scrot.th.png

Offline

#1553 2017-05-05 07:53:11

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Sector11 wrote:

@ ector1935

sudo apt-get install hddtemp

Then reconfigure hddtemp

sudo dpkg-reconfigure hddtemp

Answers: No, 0, Yes, OK, OK

Now use it in a conky without -n or sudo

${hddtemp /dev/sda}°

In a terminal:

 04 May 17 @ 16:33:42 ~
  $ hddtemp /dev/sda
/dev/sda: WDC WD5000AAKX-22ERMA0: 38°C
 
 04 May 17 @ 16:33:45 ~
  $ 

It's already in your conky so no conky work needed.

Looks GOOD!  And I see Intel reports ${freq X} for the threads too, Good to know.
and You're welcome.

Hello,
Unfortunately my ssd samsung outside,is not available,know the temperature,since it is an external ssd,but thank you for your time making it available for my paranoies.

minchionne ~ $ inxi -D
Drives:    HDD Total Size: 1000.2GB (0.7% used)
           ID-1: /dev/sdb model: TOSHIBA_MQ01ABD0 size: 750.2GB
           ID-2: USB /dev/sda model: Portable_SSD_T1 size: 250.1GB
minchionne ~ $ 

edit
Ah,thank you for the welcome!

Last edited by ector1935 (2017-05-05 07:56:01)

Offline

#1554 2017-05-05 15:55:51

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

OH yea, SSD's don't have temps sad

Will look at the 4th day low temp today.


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1555 2017-05-05 17:29:41

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 854

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

@ector1935

#Put your Accuweather address here
#address="http://www.accuweather.com/en/ar/buenos-aires/7894/weather-forecast/7894"
#address="http://www.accuweather.com/en/jp/tokyo/226396/weather-forecast/226396"
#address="http://www.accuweather.com/en/gr/kastoria/178682/weather-forecast/178682"
#address="http://www.accuweather.com/it/it/bergamo/214040/weather-forecast/214040"
 address=http://www.accuweather.com/it/it/gorlago/2277856/weather-forecast/2277856
last_number=$(echo $address|sed 's/^.*\///')

I've noticed that you use the Italian conky page.
The script has been designed to work only in English.
Change this line

address=http://www.accuweather.com/it/it/gorlago/2277856/weather-forecast/2277856

to

address="http://www.accuweather.com/en/it/gorlago/2277856/weather-forecast/2277856"

Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#1556 2017-05-06 09:55:54

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Thank you Teo,but also with the change in en,the weather does not work.
thank you

2017-05-06-115324_348x433_scrot.th.png
Best Regards

Last edited by ector1935 (2017-05-06 10:08:46)

Offline

#1557 2017-05-06 10:00:22

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 854

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

What doesn't work?
The image shows a working conky.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#1558 2017-05-06 10:09:44

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

The temperatures I do not know are accurate, the minimums are incorrect.

http://www.accuweather.com/it/it/gorlag … 7856?day=2

Last edited by ector1935 (2017-05-06 10:11:56)

Offline

#1559 2017-05-06 11:52:18

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 854

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Ok, can you post your full script and conkyrc?


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#1560 2017-05-06 12:33:25

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

my .conkyr4

# pkill -xf "conky -c /media/5/conky/Temetka/Temetka_80s_s11.conky" &

# Inspired by: Temetka https://forums.bunsenlabs.org/viewtopic.php?pid=47838#p47838

## ---------- Begin Window Settings
#update_interval 1.0
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager  #,sticky
own_window_colour 000000
own_window_class Conky
own_window_title Temetka's 80's Sunsent
## ARGB can be used for real transparencyown_window_hints
#own_window_argb_visual yes ## Options: yes or no
## Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 80

minimum_size 300 0  ### width | height
maximum_width 300

gap_x 15    # l|r
gap_y 15    # u|d

alignment tl
## ---------- End Window Settings
## ---------- Font Settings
use_xft yes
#xftfont Liberation Mono:bold:size=11
#xftfont Fantasque Sans Mono:bold:size=12
#xftfont Monofur:bold:size=10
#xftfont DejaVu Sans Mono:bold:size=10
xftfont Fira Mono:bold:size=10

# Alpha of Xft font. Must be a value at or between 1 and 0 ###
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes

uppercase no
#########################  End Font Settings  ###
## --------- Color Settings
draw_shades yes
default_shade_color 000000
draw_outline no
default_outline_color 000000

default_color DCDCDC #Gainsboro
color0 98FB98 #PaleGreen
color1 778899 #LightSlateGray
color2 FFD700 #Gold
color3 B0E0E6 #PowderBlue
color4 F4A460 #SandyBrown
color5 DEB887 #BurlyWood
color6 00BFFF #DeepSkyBlue
color7 5F9EA0 #CadetBlue
color8 FFA500 #Orange
color9 FF4500 #OrangeRed
## ---------- End Color Settings
###  Borders Section  ###########################
draw_borders no
# Stippled borders?
stippled_borders 5
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 2
# graph borders
draw_graph_borders yes #no
#default_graph_size 15 40
#######################  End Borders Section  ###
###  Miscellaneous Section  #####################
# Boolean value, if true, Conky will be forked to background when started.
background yes

# Adds spaces around certain objects to stop them from moving other things
# around, this only helps if you are using a mono font
# Options: right, left or none
use_spacer none

# Default and Minimum size is 256 - needs more for single commands that
# "call" a lot of text IE: bash scripts
# text_buffer_size 6144

# Subtract (file system) buffers from used memory?
no_buffers yes

# change GiB to G and MiB to M
short_units yes

# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
# pad_percents 2

# Imlib2 image cache size, in bytes. Default 4MiB Increase this value if you use
# $image lots. Set to 0 to disable the image cache.
imlib_cache_size 0

# Use the Xdbe extension? (eliminates flicker)
# It is highly recommended to use own window with this one
# so double buffer won't be so big.
double_buffer yes

#   Maximum size of user text buffer, i.e. layout below TEXT line in config file
#  (default is 16384 bytes)
# max_user_text 16384

# Desired output unit of all objects displaying a temperature. Parameters are
# either "fahrenheit" or "celsius". The default unit is degree Celsius.
# temperature_unit Fahrenheit

update_interval 1
#################  End Miscellaneous Section  ###

TEXT
${image /home/minchionne/1_accuweather/80s_Sunset.png -p 66,0 -s 170x170}\
${font Kenyan Coffee:size=50}${color3}${alignc}${time %H:%M}${color}${font}
${font Shimes One PERSONAL USE:size=70}${color6}${alignc}${time %A}${font}
${font Kenyan Coffee:size=20}${color3}${alignc}${time %d %b %y}${color}${font}
${color3}Booted @${color} ${exec who -b | cut -c23-}${alignr}${color3}Up:${color} ${exec w | awk '/ up /{gsub(/,$/,"",$3);print $3}'}
${color1}${swapbar 0}${color}
${color5}${alignc}TEMPS
${goto 20}${color3}CPU${color} ${acpitemp}°\
${goto 93}${color3}M|B${color} ${execpi 5 sensors acpitz-virtual-0 | grep 'temp1' | awk -F'+' '{print $2}' | awk -F'.' '{print $1}'}°\
${goto 165}${color3}SDA${color} ${hddtemp /dev/sda}°\
${goto 240}${color3}GPU${color}${hwmon 1 temp 1}° 
${color1}${swapbar 0}${color}
${alignc}${color5}Intel Core i7-3630QM ${color3}Avg${color} ${if_match ${cpu cpu0} < 10}  ${cpu cpu0}\
${else}${if_match ${cpu cpu0} < 100} ${cpu cpu0}\
${else}${color}${cpu cpu0}${color}${endif}${endif}%
${color3}CPU   ${color0} %${color}          MHz${alignr 5}${color3}${goto 190}CPU   ${color0}%${color}         MHz
${goto 25}${color3}1${color0}   \
${if_match ${cpu cpu1} < 10}  ${cpu cpu1}\
${else}${if_match ${cpu cpu1} < 100} ${cpu cpu1}\
${else}${color9}${cpu cpu1}${color}${endif}${endif}\
${goto 100}${color}${freq 1}${goto 200}${color3}5${goto 222}${color0}${if_match ${cpu cpu5} < 10}  ${cpu cpu5}\
${else}${if_match ${cpu cpu5} < 100} ${cpu cpu5}\
${else}${color9}${cpu cpu5}${color}${endif}${endif}\
${alignr 2}${color}${freq 5}
${goto 25}${color3}2${color0}   \
${if_match ${cpu cpu2} < 10}  ${cpu cpu2}\
${else}${if_match ${cpu cpu2} < 100} ${cpu cpu2}\
${else}${color9}${cpu cpu2}${color}${endif}${endif}\
${goto 100}${color}${freq 2}${goto 200}${color3}6${goto 222}${color0}${if_match ${cpu cpu6} < 10}  ${cpu cpu6}\
${else}${if_match ${cpu cpu6} < 100} ${cpu cpu6}\
${else}${color9}${cpu cpu6}${color}${endif}${endif}\
${alignr 2}${color}${freq 6}
${goto 25}${color3}3${color0}   \
${if_match ${cpu cpu3} < 10}  ${cpu cpu3}\
${else}${if_match ${cpu cpu3} < 100} ${cpu cpu3}\
${else}${color9}${cpu cpu3}${color}${endif}${endif}\
${goto 100}${color}${freq 3}${goto 200}${color3}7${goto 222}${color0}${if_match ${cpu cpu7} < 10}  ${cpu cpu7}\
${else}${if_match ${cpu cpu7} < 100} ${cpu cpu7}\
${else}${color9}${cpu cpu7}${color}${endif}${endif}\
${alignr 2}${color}${freq 7}
${goto 25}${color3}4${color0}   \
${if_match ${cpu cpu4} < 10}  ${cpu cpu4}\
${else}${if_match ${cpu cpu4} < 100} ${cpu cpu4}\
${else}${color9}${cpu cpu4}${color}${endif}${endif}\
${goto 100}${color}${freq 4}${goto 200}${color0}8${goto 222}${color0}${if_match ${cpu cpu8} < 10}  ${cpu cpu8}\
${else}${if_match ${cpu cpu8} < 100} ${cpu cpu8}\
${else}${color9}${cpu cpu8}${color}${endif}${endif}\
${alignr 2}${color}${freq 8}
#${alignc}${color5}CPU Fan${color} ${platform f71882fg.2560 fan 1} ${color3}RPM
${color1}${swapbar 0}${color}
${alignc}${color3}Memory${color}  Using:${color3} ${mem} of ${memmax}
${color1}${swapbar 0}${color}
 S.T.${goto 118}Currently:${alignr}Temp\

${image $HOME/1_accuweather/forecast_2016/forecast_0.png -p 23,435 -s 250x252}\
${font Fira Mono:size=30}±${execi 300 sed -n '3p' ~/1_accuweather/curr_cond}\
${alignr}${execi 300 sed -n '2p' ~/1_accuweather/curr_cond}${font}


 UVI: ${execi 300 sed -n '9p' ~/1_accuweather/curr_cond}/11\
 ${alignr}${execi 300 sed -n '8p' ~/1_accuweather/curr_cond}:Bar


Wind: ${execi 300 sed -n '5p' ~/1_accuweather/curr_cond} ${execi 300 sed -n '6p' ~/1_accuweather/curr_cond}\
 ${alignr}${execi 300 sed -n '7p' ~/1_accuweather/curr_cond} :Hum


 Cld: ${execi 300 sed -n '10p' ~/1_accuweather/curr_cond}\
 ${alignr}${execi 300 sed -n '13p' ~/1_accuweather/curr_cond} :Vis


${image ~/4_Moon/0.png -p 100,725}
${alignc}${swapbar 0,50} Current Moon & Forecast ${swapbar 0,50}
${color5}${execi 3600 echo `date --date="0 day" | awk '{print $1" "$3" "$2}'`}\
${alignr}${execi 3600 echo `date --date="1 day" | awk '{print $1" "$3" "$2}'`} ${color}
${image $HOME/1_accuweather/forecast_2016/forecast_1.png -p 10,720 -s 45x45}\
${image $HOME/1_accuweather/forecast_2016/forecast_2.png -p 236,720 -s 45x45}\
${if_match "${execpi 300 sed -n '4p' /home/minchionne/1_accuweather/first_days}" == "Lo"} \
${else}${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}${endif}\
${alignr 55}${execi 300 sed -n '8p' ~/1_accuweather/first_days}

${goto 60}${if_match "${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}" == "Lo"}\
${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}\
${alignr https://forums.bunsenlabs.org/edit.php?id=48496#} ${execi 300 sed -n '9p' ~/1_accuweather/first_days}
${color5}${execi 3600 echo `date --date="2 day" | awk '{print $1" "$3" "$2}'`}\
${alignr}${execi 3600 echo `date --date="3 day" | awk '{print $1" "$3" "$2}'`}${color}
${image $HOME/1_accuweather/forecast_2016/forecast_3.png -p 10,785 -s 45x45}\
${image $HOME/1_accuweather/forecast_2016/forecast_4.png -p 240,785 -s 45x45}\
${execi 300 sed -n '13p' ~/1_accuweather/first_days}\
${alignr 55}${execi 300 sed -n '18p' ~/1_accuweather/first_days}

${goto 60}${execi 300 sed -n '14p' ~/1_accuweather/first_days}\
${alignr}${execi 300 sed -n '18p' ~/1_accuweather/first_days}

1_accuweather

#!/bin/bash


#function: test_image
test_image () {
    case $1 in
         1)
           echo a
         ;;
         2|3)
           echo b 
         ;;
         4|5)
           echo c
         ;;
         6)
           echo d
         ;;
         7)
           echo e
         ;;
         8)
           echo f
         ;;
         11)
           echo 0
         ;;
         12)
           echo h
         ;;
         13|14)
           echo g
         ;;
         15)
           echo m
         ;;
         16|17)
           echo k
         ;;
         18)
           echo i
         ;;
         19)
           echo q
         ;;
         20|21|23)
           echo o
         ;;
         22)
           echo r
         ;;
         24|31)
           echo E
         ;;
         25)
           echo v
         ;;
         26)
           echo x
         ;;
         29)
           echo y
         ;;
         30)
           echo 5
         ;;
         32)
           echo 6
         ;;
         33)
           echo A
         ;;
         34|35)
           echo B
         ;;
         36|37)
           echo C
         ;;
         38)
           echo D
         ;;
         39|40)
           echo G
         ;;
         41|42)
           echo K
         ;;
         43|44)
           echo O
         ;;
         *)
		   echo -
		 ;;   
        esac
} 


############################
# Check the user arguments #
############################

if (( $# < 1 || $# > 4 )); then
	echo "Invalid arguments!"
	exit
fi

forecast0=0
forecast2015=0
forecast2016=0
hourly0=0
hourly2015=0
hourly2016=0

for i in $*
	do 
		if [[ $i != -f && $i != -f2015 && $i != -f2016 && $i != -h && $i != -h2015 && $i != -h2016 ]]; then
			echo "Invalid arguments!"
			exit
		fi
		case $i in
			-f)
				forecast0=1
			;;
			-f2015)
				forecast2015=1
			;;
			-f2016)
				forecast2016=1
			;;
			-h)
				hourly0=1
			;;
			-h2015)
				hourly2015=1
			;;
			-h2016)
				hourly2016=1
			;;
		esac
	done
	
if [[ $forecast0 == 1 ]]; then
	forecast2015=0
	forecast2016=0
fi
if [[ $hourly0 == 1 ]]; then
	hourly2015=0
	hourly2016=0
fi


#Put your Accuweather address here
#address="http://www.accuweather.com/en/ar/buenos-aires/7894/weather-forecast/7894"
#address="http://www.accuweather.com/en/jp/tokyo/226396/weather-forecast/226396"
#address="http://www.accuweather.com/en/gr/kastoria/178682/weather-forecast/178682"
#address="http://www.accuweather.com/it/it/bergamo/214040/weather-forecast/214040"
 address="http://www.accuweather.com/en/it/gorlago/2277856/weather-forecast/2277856"
last_number=$(echo $address|sed 's/^.*\///')


#############################################################
# NORMAL FORECAST: -f, -f2015 or -f2016 passed as arguments #
#############################################################
if [[ $forecast0 == 1 || $forecast2015 == 1 || $forecast2016 == 1 ]]; then
	
	#function: convert_time
	convert_time () 
	{
		hours=$(echo $1|awk -F ":| " '{print $1}')
		minutes=$(echo $1|awk -F ":| " '{print $2}')
		am_or_pm=$(echo $1|awk -F ":| " '{print $3}')
		if [[ $am_or_pm == AM ]]; then
			if (( $hours < 10 )); then
				hours_24=0$hours
			fi
			if (( $hours == 10 || $hours == 11 )); then
				hours_24=$hours
			fi
			if (( $hours == 12 )); then
				hours_24=00
			fi
		elif [[ $am_or_pm == PM ]]; then
			if (( $hours != 12 )); then
				hours_24=$((hours+12))
			fi
			if (( $hours == 12 )); then
				hours_24=12
			fi
		fi
		time_24=$hours_24:$minutes
		echo $time_24
	}
	
	#function: test_wind
	test_wind () {
	    case $1 in
	         CLM)
	           echo -
	         ;;
	         S)
	           echo 1 
	         ;;
	         SSW)
	           echo 2 
	         ;;
	         SW)
	           echo 3 
	         ;;
	         WSW)
	           echo 4 
	         ;;
	         W)
	           echo 5 
	         ;;
	         WNW)
	           echo 6 
	         ;;
	         NW)
	           echo 7 
	         ;;
	         NNW)
	           echo 8 
	         ;;
	         N)
	           echo 9 
	         ;;
	         NNE)
	           echo : 
	         ;;
	         NE)
	           echo ; 
	         ;;
	         ENE)
	           echo \< 
	         ;;
	         E)
	           echo = 
	         ;;
	         ESE)
	           echo \> 
	         ;;
	         SE)
	           echo ? 
	         ;;
	         SSE)
	           echo @ 
	         ;;
	    esac
	}
	
	kill -STOP $(pidof conky)
	
	curr_addr="$(echo $address|sed 's/weather-forecast.*$//')"current-weather/"$last_number"
	wget -O $HOME/1_accuweather/curr_cond_raw "$curr_addr"
	
	addr1="$(echo $address|sed 's/weather-forecast.*$//')"daily-weather-forecast/"$last_number"
	wget -O $HOME/1_accuweather/first_days_raw "$addr1"
	
	addr2="$addr1"?day=6
	wget -O $HOME/1_accuweather/last_days_raw "$addr2"
	
	if [[ $forecast2015 == 1 ]]; then
		rm $HOME/1_accuweather/forecast_2015/forecast_*.png
	fi
	if [[ $forecast2016 == 1 ]]; then
		rm $HOME/1_accuweather/forecast_2016/forecast_*.png
	fi
	
	#current conditions
	if [[ -s $HOME/1_accuweather/curr_cond_raw ]]; then
	    sed -i '/detail-now/,/Astronomy <span class/!d' $HOME/1_accuweather/curr_cond_raw
	    egrep -i '"cond"|icon i-|large-temp|small-temp|wind-point|"wind"|Humidity|Pressure|UV Index|Cloud Cover|Ceiling|Dew Point|Visibility|Duration|Sunrise:|Sunset:|Moonrise:|Moonset:' $HOME/1_accuweather/curr_cond_raw > $HOME/1_accuweather/curr_cond
	    sed -i -e 's/^.*<strong>//g' -e 's/^.*<span>//g' -e 's/^.*icon i-//g' -e 's/^.*large-temp">//g' -e 's/^.*<\/em> //g' -e 's/^.*"cond">//g' -e 's/^.*wind-point //g' $HOME/1_accuweather/curr_cond
	    sed -i -e 's/">.*$//g' -e 's/&deg.*$//g' -e 's/<\/span>.*$//g' -e 's/&#.*$//g' -e 's/ &darr.*$//g' -e 's/ &uarr.*$//g' -e 's/<\/strong>.*$//g' $HOME/1_accuweather/curr_cond
	    sed -i '1s/-.*$//' $HOME/1_accuweather/curr_cond
	    image=$(sed -n 1p $HOME/1_accuweather/curr_cond)
	    echo $(test_image $image) >> $HOME/1_accuweather/curr_cond
		sunrise_time=$(sed -n 14p $HOME/1_accuweather/curr_cond)
		echo $(convert_time "$sunrise_time") >> $HOME/1_accuweather/curr_cond
		sunrise_time=$(sed -n 15p $HOME/1_accuweather/curr_cond)
		echo $(convert_time "$sunrise_time") >> $HOME/1_accuweather/curr_cond
		sunrise_time=$(sed -n 18p $HOME/1_accuweather/curr_cond)
		echo $(convert_time "$sunrise_time") >> $HOME/1_accuweather/curr_cond
		sunrise_time=$(sed -n 19p $HOME/1_accuweather/curr_cond)
		echo $(convert_time "$sunrise_time") >> $HOME/1_accuweather/curr_cond
		wind=$(sed -n 5p $HOME/1_accuweather/curr_cond)
		echo $(test_wind $wind) >> $HOME/1_accuweather/curr_cond
        if (( $(sed -n 14p /$HOME/1_accuweather/curr_cond|wc -c) == 8 )); then
			sed -i '14s/^/0/' $HOME/1_accuweather/curr_cond
		fi
		if (( $(sed -n 15p /$HOME/1_accuweather/curr_cond|wc -c) == 8 )); then
			sed -i '15s/^/0/' $HOME/1_accuweather/curr_cond
		fi
		if (( $(sed -n 18p /$HOME/1_accuweather/curr_cond|wc -c) == 8 )); then
			sed -i '18s/^/0/' $HOME/1_accuweather/curr_cond
		fi
		if (( $(sed -n 19p /$HOME/1_accuweather/curr_cond|wc -c) == 8 )); then
			sed -i '19s/^/0/' $HOME/1_accuweather/curr_cond
		fi
	    if [[ $forecast2015 == 1 ]]; then
			cp $HOME/1_accuweather/Forecast_Images_2015/$(sed -n 1p $HOME/1_accuweather/curr_cond).png $HOME/1_accuweather/forecast_2015/forecast_0.png
			cp $HOME/1_accuweather/Forecast_Images_2015/$(sed -n 5p $HOME/1_accuweather/curr_cond).png $HOME/1_accuweather/forecast_2015/wind_0.png
		fi
		if [[ $forecast2016 == 1 ]]; then
			cp $HOME/1_accuweather/Forecast_Images_2016/$(sed -n 1p $HOME/1_accuweather/curr_cond).png $HOME/1_accuweather/forecast_2016/forecast_0.png
			cp $HOME/1_accuweather/Forecast_Images_2016/$(sed -n 5p $HOME/1_accuweather/curr_cond).png $HOME/1_accuweather/forecast_2016/wind_0.png
		fi
	fi
	
	#First 5 days
	if [[ -s $HOME/1_accuweather/first_days_raw ]]; then
	
	    sed -i '/.feed-controls/,/\.feed-tabs/!d' $HOME/1_accuweather/first_days_raw
	    egrep -i 'href="#"|icon i-|"large-temp"|"small-temp"|temp-label|"cond"' $HOME/1_accuweather/first_days_raw > $HOME/1_accuweather/first_days
	    sed -i -e '/icon/s/-. //g' -e 's/^.*icon i-//g' -e 's/^.*large-temp">//g' -e 's/^.*small-temp">\///g' -e 's/^.*"cond">//g' -e 's/^.*href="#">//g' -e 's/^.*"temp-label tonight ">//g' -e 's/^.*"temp-label tonight selected">//g' $HOME/1_accuweather/first_days
	    sed -i -e 's/&deg.*$//g' -e 's/<\/a>.*$//g' -e 's/<\/span>.*$//g' -e 's/">.*$//g' $HOME/1_accuweather/first_days
	    sed -i -e 's/Mon$/MONDAY/' -e 's/Tue$/TUESDAY/' -e 's/Wed$/WEDNESDAY/' -e 's/Thu$/THURSDAY/' -e 's/Fri$/FRIDAY/' -e 's/Sat$/SATURDAY/' -e 's/Sun$/SUNDAY/' -e 's/Today$/TODAY/' -e 's/Tonight$/TONIGHT/' -e 's/Early AM/EARLY AM/' $HOME/1_accuweather/first_days
	    for (( i=2; i<=22; i+=5 ))
		  do
	          image=$(sed -n "${i}"p $HOME/1_accuweather/first_days)
	          echo $(test_image $image) >> $HOME/1_accuweather/first_days
		  done
		if [[ $forecast0 == 0 ]]; then
			j=1
			for (( i=2; i<=22; i+=5 ))
			  do
				if [[ $forecast2015 == 1 ]]; then
					cp $HOME/1_accuweather/Forecast_Images_2015/$(sed -n ${i}p $HOME/1_accuweather/first_days).png $HOME/1_accuweather/forecast_2015/forecast_$j.png
				fi
				if [[ $forecast2016 == 1 ]]; then
					cp $HOME/1_accuweather/Forecast_Images_2016/$(sed -n ${i}p $HOME/1_accuweather/first_days).png $HOME/1_accuweather/forecast_2016/forecast_$j.png
				fi
				((j++))
			  done
		fi
	fi
	
	#Next 5 days
	if [[ -s $HOME/1_accuweather/last_days_raw ]]; then
		
		sed -i '/.feed-controls/,/\.feed-tabs/!d' $HOME/1_accuweather/last_days_raw
	    egrep -i 'href="#"|icon i-|large-temp|small-temp|temp-label|"cond"' $HOME/1_accuweather/last_days_raw > $HOME/1_accuweather/last_days
	    sed -i -e '/icon/s/-. //g' -e 's/^.*icon i-//g' -e 's/^.*large-temp">//g' -e 's/^.*small-temp">\///g' -e 's/^.*"cond">//g' -e 's/^.*href="#">//g' -e 's/^.*"temp-label tonight ">//g' $HOME/1_accuweather/last_days
	    sed -i -e 's/&deg.*$//g' -e 's/<\/a>.*$//g' -e 's/<\/span>.*$//g' -e 's/">.*$//g' $HOME/1_accuweather/last_days
	    sed -i -e 's/Mon$/MONDAY/' -e 's/Tue$/TUESDAY/' -e 's/Wed$/WEDNESDAY/' -e 's/Thu$/THURSDAY/' -e 's/Fri$/FRIDAY/' -e 's/Sat$/SATURDAY/' -e 's/Sun$/SUNDAY/' $HOME/1_accuweather/last_days
	    for (( i=2; i<=22; i+=5 ))
		  do
	          image=$(sed -n "${i}"p $HOME/1_accuweather/last_days)
	          echo $(test_image $image) >> $HOME/1_accuweather/last_days
		  done
		if [[ $forecast0 == 0 ]]; then
			j=6
			for (( i=2; i<=22; i+=5 ))
			  do
			    if [[ $forecast2015 == 1 ]]; then
					cp $HOME/1_accuweather/Forecast_Images_2015/$(sed -n ${i}p $HOME/1_accuweather/last_days).png $HOME/1_accuweather/forecast_2015/forecast_$j.png
				fi
				if [[ $forecast2016 == 1 ]]; then
					cp $HOME/1_accuweather/Forecast_Images_2016/$(sed -n ${i}p $HOME/1_accuweather/last_days).png $HOME/1_accuweather/forecast_2016/forecast_$j.png
				fi
				((j++))
			  done
		fi
	fi
	
	if [[ $hourly0 != 1 && $hourly2015 != 1 && $hourly2016 != 1 ]]; then
		kill -CONT $(pidof conky)
	fi

fi


#############################################################
# HOURLY FORECAST: -h, -h2015 or -h2016 passed as arguments #
#############################################################
if [[ $hourly0 == 1 || $hourly2015 == 1 || $hourly2016 == 1 ]]; then

	#Hourly: First 8h
	
	if [[ $forecast0 != 1 && $forecast2015 != 1 && $forecast2016 != 1 ]]; then
		kill -STOP $(pidof conky)
	fi
	
	if [[ $hourly2015 == 1 ]]; then
		rm $HOME/1_accuweather/hourly_2015/hourly_*.png
	fi
	if [[ $hourly2016 == 1 ]]; then
		rm $HOME/1_accuweather/hourly_2016/hourly_*.png
	fi	
	
	hourly_addr1="$(echo $address|sed 's/weather-forecast.*$//')"hourly-weather-forecast/"$last_number"
	wget -O $HOME/1_accuweather/hourly_raw1 "$hourly_addr1"
	
	if [[ -s $HOME/1_accuweather/hourly_raw1 ]]; then
		sed -i '/detail-tab-buttons\.detail-tab-buttons/,/<div class="hourly-table">/!d' $HOME/1_accuweather/hourly_raw1
		egrep -i 'hour=|Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|Sunday|pm<\/div>|am<\/div>|icon-weather icon i-|<th>Forecast|<span>.*<\/span>|<th>Temp|<th>Realfeel|<th>Wind|<th>Rain|<th>Snow|<th>Ice|<th>UV Index|<th>Cloud Cover|<th>Humidity|<th>Dew Point' $HOME/1_accuweather/hourly_raw1 > $HOME/1_accuweather/hourly1
		sed -i -e 's/^[ \t]*//g' -e 's/^.*<div>//g' -e 's/^.*<span>//g' -e 's/^.*<th>//g' -e 's/^.*icon i-//g' -e 's/-s">.*$//g' -e 's/<\/div>.*$//g' -e 's/&#.*$//g' -e 's/<\/span>.*$//g' -e 's/<\/th>.*$//g' -e 's/^.*href="//g' -e 's/" class=.*$//g' $HOME/1_accuweather/hourly1
		sed -i -e 's/Monday/Mon/' -e 's/Tuesday/Tue/' -e 's/Wednesday/Wed/' -e 's/Thursday/Thu/' -e 's/Friday/Fri/' -e 's/Saturday/Sat/' -e 's/Sunday/Sun/' -e 's/\r//g' $HOME/1_accuweather/hourly1
		echo "ConkyWeather Font Icons" >> $HOME/1_accuweather/hourly1
		for (( i=4; i<=18; i+=2 ))
		  do
	          image=$(sed -n "${i}"p $HOME/1_accuweather/hourly1)
	          echo $(test_image $image) >> $HOME/1_accuweather/hourly1
		  done
		if [[ $hourly0 == 0 ]]; then
			j=1
			for (( i=4; i<=18; i+=2 ))
			  do
		    	if [[ $hourly2015 == 1 ]]; then
					cp $HOME/1_accuweather/Forecast_Images_2015/$(sed -n ${i}p $HOME/1_accuweather/hourly1).png $HOME/1_accuweather/hourly_2015/hourly_$j.png
				fi
				if [[ $hourly2016 == 1 ]]; then
					cp $HOME/1_accuweather/Forecast_Images_2016/$(sed -n ${i}p $HOME/1_accuweather/hourly1).png $HOME/1_accuweather/hourly_2016/hourly_$j.png
				fi	    	
		    	((j++))
			  done
		fi
	fi
	
	#Hourly: Next 8h
	hourly_addr2=$(sed -n 1p $HOME/1_accuweather/hourly1)
	wget -O $HOME/1_accuweather/hourly_raw2 "$hourly_addr2"
	
	if [[ -s $HOME/1_accuweather/hourly_raw2 ]]; then
		sed -i '/detail-tab-buttons\.detail-tab-buttons/,/<div class="hourly-table">/!d' $HOME/1_accuweather/hourly_raw2
		egrep -i 'hour=|Monday|Tuesday|Wednesday|Thursday|Friday|Saturday|Sunday|pm<\/div>|am<\/div>|icon-weather icon i-|<th>Forecast|<span>.*<\/span>|<th>Temp|<th>Realfeel|<th>Wind|<th>Rain|<th>Snow|<th>Ice|<th>UV Index|<th>Cloud Cover|<th>Humidity|<th>Dew Point' $HOME/1_accuweather/hourly_raw2 > $HOME/1_accuweather/hourly2
		sed -i -e 's/^[ \t]*//g' -e 's/^.*<div>//g' -e 's/^.*<span>//g' -e 's/^.*<th>//g' -e 's/^.*icon i-//g' -e 's/-s">.*$//g' -e 's/<\/div>.*$//g' -e 's/&#.*$//g' -e 's/<\/span>.*$//g' -e 's/<\/th>.*$//g' -e 's/^.*href="//g' -e 's/" class=.*$//g' $HOME/1_accuweather/hourly2
		sed -i 1d $HOME/1_accuweather/hourly2
		sed -i -e 's/Monday/Mon/' -e 's/Tuesday/Tue/' -e 's/Wednesday/Wed/' -e 's/Thursday/Thu/' -e 's/Friday/Fri/' -e 's/Saturday/Sat/' -e 's/Sunday/Sun/' -e 's/\r//g' $HOME/1_accuweather/hourly2
		echo "ConkyWeather Font Icons" >> $HOME/1_accuweather/hourly2
		for (( i=4; i<=18; i+=2 ))
		  do
	          image=$(sed -n "${i}"p $HOME/1_accuweather/hourly2)
	          echo $(test_image $image) >> $HOME/1_accuweather/hourly2
		  done
		if [[ $hourly0 == 0 ]]; then
			j=9
			for (( i=4; i<=18; i+=2 ))
			  do
		    	if [[ $hourly2015 == 1 ]]; then
					cp $HOME/1_accuweather/Forecast_Images_2015/$(sed -n ${i}p $HOME/1_accuweather/hourly2).png $HOME/1_accuweather/hourly_2015/hourly_$j.png
				fi
				if [[ $hourly2016 == 1 ]]; then
					cp $HOME/1_accuweather/Forecast_Images_2016/$(sed -n ${i}p $HOME/1_accuweather/hourly2).png $HOME/1_accuweather/hourly_2016/hourly_$j.png
				fi	    	
		    	((j++))
			  done
		fi
	fi
	
	
	# Full info, next 16h - altogether16 file
	rm $HOME/1_accuweather/altogether16 altogether16_2015 altogether16_2016
	
	#TIME
	echo "\${color ffe595}TIME\${goto 100}" > $HOME/1_accuweather/altogether16
	sed -i "1s/$/$(sed -n 2p $HOME/1_accuweather/hourly1):$(sed -n 3p $HOME/1_accuweather/hourly1)/" $HOME/1_accuweather/altogether16
	jump_to=160
	for (( i=5; i<=17; i+=2 ))
		do
			time=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "1s/$/\${goto $jump_to}$time/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	sed -i "1s/$/\${goto 580}$(sed -n 2p $HOME/1_accuweather/hourly2):$(sed -n 3p $HOME/1_accuweather/hourly2)/" $HOME/1_accuweather/altogether16
	jump_to=640
	for (( i=5; i<=17; i+=2 ))
		do
			time=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "1s/$/\${goto $jump_to}$time/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	
	sed -i '1s/$/\n\n\n/' $HOME/1_accuweather/altogether16
	
	#FORECAST
	echo "\${color ffe595}FORECAST\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100
	for (( i=20; i<=27; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1|awk '{print $1}'|cut -c1-8)
			sed -i "5s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=20; i<=27; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2|awk '{print $1}'|cut -c1-8)
			sed -i "5s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	sed -i '5s/$/\n/' $HOME/1_accuweather/altogether16
	jump_to=100
	for (( i=20; i<=27; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1|awk '{print $2}'|cut -c1-8)
			sed -i "6s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=20; i<=27; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2|awk '{print $2}'|cut -c1-8)
			sed -i "6s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	
	#TEMPERATURE
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "TEMPER.\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100
	for (( i=29; i<=36; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "8s/$/\${goto $jump_to}$messg°/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=29; i<=36; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "8s/$/\${goto $jump_to}$messg°/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	
	#REAL FEEL
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "REAL FEEL\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100
	for (( i=38; i<=45; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "10s/$/\${goto $jump_to}$messg°/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done	
	for (( i=38; i<=45; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "10s/$/\${goto $jump_to}$messg°/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done	
		
	#WIND
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "WIND\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100
	for (( i=47; i<=54; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "12s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=47; i<=54; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "12s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
		
	#RAIN
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "RAIN\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100
	for (( i=64; i<=71; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "14s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=64; i<=71; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "14s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
		
	#SNOW
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "SNOW\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100
	for (( i=73; i<=80; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "16s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=73; i<=80; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "16s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	
	#ICE
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "ICE\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100
	for (( i=82; i<=89; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "18s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=82; i<=89; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "18s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
		
	#UV INDEX
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "UV INDEX\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100	
	for (( i=99; i<=106; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "20s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=99; i<=106; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "20s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
		
	#CLOUD COVER
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "CLOUD COV.\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100	
	for (( i=108; i<=115; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "22s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=108; i<=115; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "22s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	
	#HUMIDITY
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "HUMIDITY\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100	
	for (( i=117; i<=124; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "24s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=117; i<=124; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "24s/$/\${goto $jump_to}$messg/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
		
	#DEW POINT
	echo "\${color ffe595}\${goto 100}\${hr 1}" >> $HOME/1_accuweather/altogether16
	echo "DEW POINT\${color}" >> $HOME/1_accuweather/altogether16
	jump_to=100	
	for (( i=126; i<=133; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly1)
			sed -i "26s/$/\${goto $jump_to}$messg°/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
	for (( i=126; i<=133; i+=1 ))
		do
			messg=$(sed -n ${i}p $HOME/1_accuweather/hourly2)
			sed -i "26s/$/\${goto $jump_to}$messg°/" $HOME/1_accuweather/altogether16
			((jump_to+=60))
		done
		
	#IMAGES
	if [[ $hourly0 == 0 ]]; then
		if [[ $hourly2015 == 1 ]]; then
					jump_to=75
					cp $HOME/1_accuweather/altogether16 $HOME/1_accuweather/altogether16_2015
		fi
		if [[ $hourly2016 == 1 ]]; then
					jump_to=85
					cp $HOME/1_accuweather/altogether16 $HOME/1_accuweather/altogether16_2016
		fi
		rm $HOME/1_accuweather/altogether16
		for (( i=1; i<=16; i+=1 ))
			do
				if [[ $hourly2015 == 1 ]]; then
					sed -i "4s/$/\${image \$HOME\/1_accuweather\/hourly_2015\/hourly_$i.png -s 60x36 -p $jump_to,49}/" $HOME/1_accuweather/altogether16_2015
				fi
				if [[ $hourly2016 == 1 ]]; then
					sed -i "4s/$/\${image \$HOME\/1_accuweather\/hourly_2016\/hourly_$i.png -s 36x36 -p $jump_to,49}/" $HOME/1_accuweather/altogether16_2016
				fi			
				((jump_to+=60))
			done
	fi
	
	#CONKYFONT
	if [[ $hourly0 == 1 ]]; then
		sed -i '4s/$/\${color}\${font conkyweather:size=35}/' $HOME/1_accuweather/altogether16
		jump_to=95
		for (( i=135; i<=142; i+=1 ))
			do
				sed -i "4s/$/\${goto $jump_to}$(sed -n ${i}p $HOME/1_accuweather/hourly1)/" $HOME/1_accuweather/altogether16
				((jump_to+=60))
			done
		for (( i=135; i<=142; i+=1 ))
			do
				sed -i "4s/$/\${goto $jump_to}$(sed -n ${i}p $HOME/1_accuweather/hourly2)/" $HOME/1_accuweather/altogether16
				((jump_to+=60))
			done
		sed -i '4s/$/\${font}/' $HOME/1_accuweather/altogether16
		sed -i '2,3d' $HOME/1_accuweather/altogether16
	fi
	
	kill -CONT $(pidof conky)
fi	

If you need anything else let me know, I hope it's the right script
thank teo

Offline

#1561 2017-05-06 15:27:52

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

@ector1935 and Teo

MY OOPS! - I claim 100% responsibility! ops

@ector1935
The last two lines of your conky  look like this:

${goto 60}${execi 300 sed -n '14p' ~/1_accuweather/first_days}\
${alignr}${execi 300 sed -n '19p' ~/1_accuweather/first_days}

change the last line to:

${goto 60}${execi 300 sed -n '14p' ~/1_accuweather/first_days}\
${alignr}${execi 300 sed -n '24p' ~/1_accuweather/first_days}

ie: '19p' becomes '24p'

That will fix MY OOPS! 2017-05-06_122343_Scrot11.th.png


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1562 2017-05-06 16:11:24

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

@Sector11 is missing little,now only the first day's temperature is missing.
Thank@Sector11
2017-05-06-180755_355x463_scrot.th.png

edit
It should be correct, because we are now at night
thank you

Tomorrow I'll let you know if it's all ok

Last edited by ector1935 (2017-05-08 08:23:41)

Offline

#1563 2017-05-06 18:07:01

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 854

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Good to know guys. 
Waiting for a post from you ector1935.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#1564 2017-05-06 19:42:07

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

TeoBigusGeekus wrote:

Good to know guys. 
Waiting for a post from you ector1935.

sorry,@Teo
I did not understand the question, what should I post?

Offline

#1565 2017-05-06 19:44:04

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 854

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Just post if the script runs ok.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#1566 2017-05-06 19:53:41

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Put the scrip, but in my opinion here,there is still a mistake:

${else}${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}${endif}\
${alignr 55}${execi 300 sed -n '8p' ~/1_accuweather/first_days}

addition the endif for me does not want it.
.conkyrc4

# pkill -xf "conky -c /media/5/conky/Temetka/Temetka_80s_s11.conky" &

# Inspired by: Temetka https://forums.bunsenlabs.org/viewtopic.php?pid=47838#p47838

## ---------- Begin Window Settings
#update_interval 1.0
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager  #,sticky
own_window_colour 000000
own_window_class Conky
own_window_title Temetka's 80's Sunsent
## ARGB can be used for real transparencyown_window_hints
#own_window_argb_visual yes ## Options: yes or no
## Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 80

minimum_size 300 0  ### width | height
maximum_width 300

gap_x 15    # l|r
gap_y 15    # u|d

alignment tl
## ---------- End Window Settings
## ---------- Font Settings
use_xft yes
#xftfont Liberation Mono:bold:size=11
#xftfont Fantasque Sans Mono:bold:size=12
#xftfont Monofur:bold:size=10
#xftfont DejaVu Sans Mono:bold:size=10
xftfont Fira Mono:bold:size=10

# Alpha of Xft font. Must be a value at or between 1 and 0 ###
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes

uppercase no
#########################  End Font Settings  ###
## --------- Color Settings
draw_shades yes
default_shade_color 000000
draw_outline no
default_outline_color 000000

default_color DCDCDC #Gainsboro
color0 98FB98 #PaleGreen
color1 778899 #LightSlateGray
color2 FFD700 #Gold
color3 B0E0E6 #PowderBlue
color4 F4A460 #SandyBrown
color5 DEB887 #BurlyWood
color6 00BFFF #DeepSkyBlue
color7 5F9EA0 #CadetBlue
color8 FFA500 #Orange
color9 FF4500 #OrangeRed
## ---------- End Color Settings
###  Borders Section  ###########################
draw_borders no
# Stippled borders?
stippled_borders 5
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 2
# graph borders
draw_graph_borders yes #no
#default_graph_size 15 40
#######################  End Borders Section  ###
###  Miscellaneous Section  #####################
# Boolean value, if true, Conky will be forked to background when started.
background yes

# Adds spaces around certain objects to stop them from moving other things
# around, this only helps if you are using a mono font
# Options: right, left or none
use_spacer none

# Default and Minimum size is 256 - needs more for single commands that
# "call" a lot of text IE: bash scripts
# text_buffer_size 6144

# Subtract (file system) buffers from used memory?
no_buffers yes

# change GiB to G and MiB to M
short_units yes

# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
# pad_percents 2

# Imlib2 image cache size, in bytes. Default 4MiB Increase this value if you use
# $image lots. Set to 0 to disable the image cache.
imlib_cache_size 0

# Use the Xdbe extension? (eliminates flicker)
# It is highly recommended to use own window with this one
# so double buffer won't be so big.
double_buffer yes

#   Maximum size of user text buffer, i.e. layout below TEXT line in config file
#  (default is 16384 bytes)
# max_user_text 16384

# Desired output unit of all objects displaying a temperature. Parameters are
# either "fahrenheit" or "celsius". The default unit is degree Celsius.
# temperature_unit Fahrenheit

update_interval 1
#################  End Miscellaneous Section  ###

TEXT
${image /home/minchionne/1_accuweather/80s_Sunset.png -p 66,0 -s 170x170}\
${font Kenyan Coffee:size=50}${color3}${alignc}${time %H:%M}${color}${font}
${font Shimes One PERSONAL USE:size=70}${color6}${alignc}${time %A}${font}
${font Kenyan Coffee:size=20}${color3}${alignc}${time %d %b %y}${color}${font}
${color3}Booted @${color} ${exec who -b | cut -c23-}${alignr}${color3}Up:${color} ${exec w | awk '/ up /{gsub(/,$/,"",$3);print $3}'}
${color1}${swapbar 0}${color}
${color5}${alignc}TEMPS
${goto 20}${color3}CPU${color} ${acpitemp}°\
${goto 93}${color3}M|B${color} ${execpi 5 sensors acpitz-virtual-0 | grep 'temp1' | awk -F'+' '{print $2}' | awk -F'.' '{print $1}'}°\
${goto 165}${color3}SDA${color} ${hddtemp /dev/sda}°\
${goto 240}${color3}GPU${color}${hwmon 1 temp 1}° 
${color1}${swapbar 0}${color}
${alignc}${color5}Intel Core i7-3630QM ${color3}Avg${color} ${if_match ${cpu cpu0} < 10}  ${cpu cpu0}\
${else}${if_match ${cpu cpu0} < 100} ${cpu cpu0}\
${else}${color}${cpu cpu0}${color}${endif}${endif}%
${color3}CPU   ${color0} %${color}          MHz${alignr 5}${color3}${goto 190}CPU   ${color0}%${color}         MHz
${goto 25}${color3}1${color0}   \
${if_match ${cpu cpu1} < 10}  ${cpu cpu1}\
${else}${if_match ${cpu cpu1} < 100} ${cpu cpu1}\
${else}${color9}${cpu cpu1}${color}${endif}${endif}\
${goto 100}${color}${freq 1}${goto 200}${color3}5${goto 222}${color0}${if_match ${cpu cpu5} < 10}  ${cpu cpu5}\
${else}${if_match ${cpu cpu5} < 100} ${cpu cpu5}\
${else}${color9}${cpu cpu5}${color}${endif}${endif}\
${alignr 2}${color}${freq 5}
${goto 25}${color3}2${color0}   \
${if_match ${cpu cpu2} < 10}  ${cpu cpu2}\
${else}${if_match ${cpu cpu2} < 100} ${cpu cpu2}\
${else}${color9}${cpu cpu2}${color}${endif}${endif}\
${goto 100}${color}${freq 2}${goto 200}${color3}6${goto 222}${color0}${if_match ${cpu cpu6} < 10}  ${cpu cpu6}\
${else}${if_match ${cpu cpu6} < 100} ${cpu cpu6}\
${else}${color9}${cpu cpu6}${color}${endif}${endif}\
${alignr 2}${color}${freq 6}
${goto 25}${color3}3${color0}   \
${if_match ${cpu cpu3} < 10}  ${cpu cpu3}\
${else}${if_match ${cpu cpu3} < 100} ${cpu cpu3}\
${else}${color9}${cpu cpu3}${color}${endif}${endif}\
${goto 100}${color}${freq 3}${goto 200}${color3}7${goto 222}${color0}${if_match ${cpu cpu7} < 10}  ${cpu cpu7}\
${else}${if_match ${cpu cpu7} < 100} ${cpu cpu7}\
${else}${color9}${cpu cpu7}${color}${endif}${endif}\
${alignr 2}${color}${freq 7}
${goto 25}${color3}4${color0}   \
${if_match ${cpu cpu4} < 10}  ${cpu cpu4}\
${else}${if_match ${cpu cpu4} < 100} ${cpu cpu4}\
${else}${color9}${cpu cpu4}${color}${endif}${endif}\
${goto 100}${color}${freq 4}${goto 200}${color0}8${goto 222}${color0}${if_match ${cpu cpu8} < 10}  ${cpu cpu8}\
${else}${if_match ${cpu cpu8} < 100} ${cpu cpu8}\
${else}${color9}${cpu cpu8}${color}${endif}${endif}\
${alignr 2}${color}${freq 8}
#${alignc}${color5}CPU Fan${color} ${platform f71882fg.2560 fan 1} ${color3}RPM
${color1}${swapbar 0}${color}
${alignc}${color3}Memory${color}  Using:${color3} ${mem} of ${memmax}
${color1}${swapbar 0}${color}
 S.T.${goto 118}Currently:${alignr}Temp\

${image $HOME/1_accuweather/forecast_2016/forecast_0.png -p 23,435 -s 250x252}\
${font Fira Mono:size=30}±${execi 300 sed -n '3p' ~/1_accuweather/curr_cond}\
${alignr}${execi 300 sed -n '2p' ~/1_accuweather/curr_cond}${font}


 UVI: ${execi 300 sed -n '9p' ~/1_accuweather/curr_cond}/11\
 ${alignr}${execi 300 sed -n '8p' ~/1_accuweather/curr_cond}:Bar


Wind: ${execi 300 sed -n '5p' ~/1_accuweather/curr_cond} ${execi 300 sed -n '6p' ~/1_accuweather/curr_cond}\
 ${alignr}${execi 300 sed -n '7p' ~/1_accuweather/curr_cond} :Hum


 Cld: ${execi 300 sed -n '10p' ~/1_accuweather/curr_cond}\
 ${alignr}${execi 300 sed -n '13p' ~/1_accuweather/curr_cond} :Vis


${image ~/4_Moon/0.png -p 100,725}
${alignc}${swapbar 0,50} Current Moon & Forecast ${swapbar 0,50}
${color5}${execi 3600 echo `date --date="0 day" | awk '{print $1" "$3" "$2}'`}\
${alignr}${execi 3600 echo `date --date="1 day" | awk '{print $1" "$3" "$2}'`} ${color}
${image $HOME/1_accuweather/forecast_2016/forecast_1.png -p 10,720 -s 45x45}\
${image $HOME/1_accuweather/forecast_2016/forecast_2.png -p 236,720 -s 45x45}\
${if_match "${execpi 300 sed -n '4p' /home/minchionne/1_accuweather/first_days}" == "Lo"}\
${else}${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}${endif}\
${alignr 55}${execi 300 sed -n '8p' ~/1_accuweather/first_days}

${goto 60}${if_match "${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}" == "Lo"}\
${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}\
${alignr https://forums.bunsenlabs.org/edit.php?id=48496#} ${execi 300 sed -n '9p' ~/1_accuweather/first_days}
${color5}${execi 3600 echo `date --date="2 day" | awk '{print $1" "$3" "$2}'`}\
${alignr}${execi 3600 echo `date --date="3 day" | awk '{print $1" "$3" "$2}'`}${color}
${image $HOME/1_accuweather/forecast_2016/forecast_3.png -p 10,785 -s 45x45}\
${image $HOME/1_accuweather/forecast_2016/forecast_4.png -p 240,785 -s 45x45}\
${execi 300 sed -n '13p' ~/1_accuweather/first_days}\
${alignr 55}${execi 300 sed -n '18p' ~/1_accuweather/first_days}

${goto 60}${execi 300 sed -n '14p' ~/1_accuweather/first_days}\
${alignr}${execi 300 sed -n '24p' ~/1_accuweather/first_days}

image
2017-05-06-215351_350x862_scrot.th.png

Last edited by ector1935 (2017-05-06 19:55:53)

Offline

#1567 2017-05-06 20:36:24

unklar
Member
Registered: 2015-10-31
Posts: 895

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

^^ector1935
they work with multiple conkyrc4!
In this posted there is no call for the scripts.   tongue

Offline

#1568 2017-05-06 21:25:17

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

ector1935 wrote:

Put the scrip, but in my opinion here,there is still a mistake:

${else}${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}${endif}\
${alignr 55}${execi 300 sed -n '8p' ~/1_accuweather/first_days}

You are only quoting a "small part" of what is needed:

${if_match "${execpi 300 sed -n '4p' /home/sector11/1_accuweather/first_days}" == "Lo"} \
${else}${execpi 300 sed -n '3p' /home/sector11/1_accuweather/first_days}${endif}\
${alignr 55}${execi 300 sed -n '8p' ~/1_accuweather/first_days}

${goto 60}${if_match "${execpi 300 sed -n '4p' /home/sector11/1_accuweather/first_days}" == "Lo"}\
${execpi 300 sed -n '3p' /home/sector11/1_accuweather/first_days}${endif}\
${alignr}${execi 300 sed -n '9p' ~/1_accuweather/first_days}

After a certain time of day accuweather stops "forscasting" the "high" temp for the day and "first_days" looks like this:

TONIGHT
36  <<... this is for the weather image
18  << -- during the day this is the HIGH position at night the LO
Lo << -- accuweather posts this at night.
Partly cloudy and mild

During the day that would look like:

TODAY
36 <<-- the image
23 <<-- today's High
18 <<-- today's Low
Partly cloudy and mild

So the conky code above is to change this output:

18
   image
           Lo

to look like this:

   image
           18

It's not an error, it's the way I created the conky.


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1569 2017-05-07 08:19:44

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Goodmorning,
I finally resolved,I see the weather as on accuweather.com,thank you all.
Here is my .conkyrc

# pkill -xf "conky -c /media/5/conky/Temetka/Temetka_80s_s11.conky" &

# Inspired by: Temetka https://forums.bunsenlabs.org/viewtopic.php?pid=47838#p47838

## ---------- Begin Window Settings
#update_interval 1.0
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,skip_taskbar,skip_pager  #,sticky
own_window_colour 000000
own_window_class Conky
own_window_title Temetka's 80's Sunsent
## ARGB can be used for real transparencyown_window_hints
#own_window_argb_visual yes ## Options: yes or no
## Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 80

minimum_size 300 0  ### width | height
maximum_width 300

gap_x 15    # l|r
gap_y 15    # u|d

alignment tl
## ---------- End Window Settings
## ---------- Font Settings
use_xft yes
#xftfont Liberation Mono:bold:size=11
#xftfont Fantasque Sans Mono:bold:size=12
#xftfont Monofur:bold:size=10
#xftfont DejaVu Sans Mono:bold:size=10
xftfont Fira Mono:bold:size=10

# Alpha of Xft font. Must be a value at or between 1 and 0 ###
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes

uppercase no
#########################  End Font Settings  ###
## --------- Color Settings
draw_shades yes
default_shade_color 000000
draw_outline no
default_outline_color 000000

default_color DCDCDC #Gainsboro
color0 98FB98 #PaleGreen
color1 778899 #LightSlateGray
color2 FFD700 #Gold
color3 B0E0E6 #PowderBlue
color4 F4A460 #SandyBrown
color5 DEB887 #BurlyWood
color6 00BFFF #DeepSkyBlue
color7 5F9EA0 #CadetBlue
color8 FFA500 #Orange
color9 FF4500 #OrangeRed
## ---------- End Color Settings
###  Borders Section  ###########################
draw_borders no
# Stippled borders?
stippled_borders 5
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 2
# graph borders
draw_graph_borders yes #no
#default_graph_size 15 40
#######################  End Borders Section  ###
###  Miscellaneous Section  #####################
# Boolean value, if true, Conky will be forked to background when started.
background yes

# Adds spaces around certain objects to stop them from moving other things
# around, this only helps if you are using a mono font
# Options: right, left or none
use_spacer none

# Default and Minimum size is 256 - needs more for single commands that
# "call" a lot of text IE: bash scripts
# text_buffer_size 6144

# Subtract (file system) buffers from used memory?
no_buffers yes

# change GiB to G and MiB to M
short_units yes

# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
# pad_percents 2

# Imlib2 image cache size, in bytes. Default 4MiB Increase this value if you use
# $image lots. Set to 0 to disable the image cache.
imlib_cache_size 0

# Use the Xdbe extension? (eliminates flicker)
# It is highly recommended to use own window with this one
# so double buffer won't be so big.
double_buffer yes

#   Maximum size of user text buffer, i.e. layout below TEXT line in config file
#  (default is 16384 bytes)
# max_user_text 16384

# Desired output unit of all objects displaying a temperature. Parameters are
# either "fahrenheit" or "celsius". The default unit is degree Celsius.
# temperature_unit Fahrenheit

update_interval 1
#################  End Miscellaneous Section  ###

TEXT
${image /home/minchionne/1_accuweather/80s_Sunset.png -p 66,0 -s 170x170}\
${font Kenyan Coffee:size=50}${color3}${alignc}${time %H:%M}${color}${font}
${font Shimes One PERSONAL USE:size=70}${color6}${alignc}${time %A}${font}
${font Kenyan Coffee:size=20}${color3}${alignc}${time %d %b %y}${color}${font}
${color3}Booted @${color} ${exec who -b | cut -c23-}${alignr}${color3}Up:${color} ${exec w | awk '/ up /{gsub(/,$/,"",$3);print $3}'}
${color1}${swapbar 0}${color}
${color5}${alignc}TEMPS
${goto 20}${color3}CPU${color} ${acpitemp}°\
${goto 93}${color3}M|B${color} ${execpi 5 sensors acpitz-virtual-0 | grep 'temp1' | awk -F'+' '{print $2}' | awk -F'.' '{print $1}'}°\
${goto 165}${color3}SDA${color} ${hddtemp /dev/sda}°\
${goto 240}${color3}GPU${color}${hwmon 1 temp 1}° 
${color1}${swapbar 0}${color}
${alignc}${color5}Intel Core i7-3630QM ${color3}Avg${color} ${if_match ${cpu cpu0} < 10}  ${cpu cpu0}\
${else}${if_match ${cpu cpu0} < 100} ${cpu cpu0}\
${else}${color}${cpu cpu0}${color}${endif}${endif}%
${color3}CPU   ${color0} %${color}          MHz${alignr 5}${color3}${goto 190}CPU   ${color0}%${color}         MHz
${goto 25}${color3}1${color0}   \
${if_match ${cpu cpu1} < 10}  ${cpu cpu1}\
${else}${if_match ${cpu cpu1} < 100} ${cpu cpu1}\
${else}${color9}${cpu cpu1}${color}${endif}${endif}\
${goto 100}${color}${freq 1}${goto 200}${color3}5${goto 222}${color0}${if_match ${cpu cpu5} < 10}  ${cpu cpu5}\
${else}${if_match ${cpu cpu5} < 100} ${cpu cpu5}\
${else}${color9}${cpu cpu5}${color}${endif}${endif}\
${alignr 2}${color}${freq 5}
${goto 25}${color3}2${color0}   \
${if_match ${cpu cpu2} < 10}  ${cpu cpu2}\
${else}${if_match ${cpu cpu2} < 100} ${cpu cpu2}\
${else}${color9}${cpu cpu2}${color}${endif}${endif}\
${goto 100}${color}${freq 2}${goto 200}${color3}6${goto 222}${color0}${if_match ${cpu cpu6} < 10}  ${cpu cpu6}\
${else}${if_match ${cpu cpu6} < 100} ${cpu cpu6}\
${else}${color9}${cpu cpu6}${color}${endif}${endif}\
${alignr 2}${color}${freq 6}
${goto 25}${color3}3${color0}   \
${if_match ${cpu cpu3} < 10}  ${cpu cpu3}\
${else}${if_match ${cpu cpu3} < 100} ${cpu cpu3}\
${else}${color9}${cpu cpu3}${color}${endif}${endif}\
${goto 100}${color}${freq 3}${goto 200}${color3}7${goto 222}${color0}${if_match ${cpu cpu7} < 10}  ${cpu cpu7}\
${else}${if_match ${cpu cpu7} < 100} ${cpu cpu7}\
${else}${color9}${cpu cpu7}${color}${endif}${endif}\
${alignr 2}${color}${freq 7}
${goto 25}${color3}4${color0}   \
${if_match ${cpu cpu4} < 10}  ${cpu cpu4}\
${else}${if_match ${cpu cpu4} < 100} ${cpu cpu4}\
${else}${color9}${cpu cpu4}${color}${endif}${endif}\
${goto 100}${color}${freq 4}${goto 200}${color0}8${goto 222}${color0}${if_match ${cpu cpu8} < 10}  ${cpu cpu8}\
${else}${if_match ${cpu cpu8} < 100} ${cpu cpu8}\
${else}${color9}${cpu cpu8}${color}${endif}${endif}\
${alignr 2}${color}${freq 8}
#${alignc}${color5}CPU Fan${color} ${platform f71882fg.2560 fan 1} ${color3}RPM
${color1}${swapbar 0}${color}
${alignc}${color3}Memory${color}  Using:${color3} ${mem} of ${memmax}
${color1}${swapbar 0}${color}
 S.T.${goto 118}Currently:${alignr}Temp\

${image $HOME/1_accuweather/forecast_2016/forecast_0.png -p 23,435 -s 250x252}\
${font Fira Mono:size=30}±${execi 300 sed -n '3p' ~/1_accuweather/curr_cond}\
${alignr}${execi 300 sed -n '2p' ~/1_accuweather/curr_cond}${font}


 UVI: ${execi 300 sed -n '9p' ~/1_accuweather/curr_cond}/11\
 ${alignr}${execi 300 sed -n '8p' ~/1_accuweather/curr_cond}:Bar


Wind: ${execi 300 sed -n '5p' ~/1_accuweather/curr_cond} ${execi 300 sed -n '6p' ~/1_accuweather/curr_cond}\
 ${alignr}${execi 300 sed -n '7p' ~/1_accuweather/curr_cond} :Hum


 Cld: ${execi 300 sed -n '10p' ~/1_accuweather/curr_cond}\
 ${alignr}${execi 300 sed -n '13p' ~/1_accuweather/curr_cond} :Vis


${image ~/4_Moon/0.png -p 100,725}
${alignc}${swapbar 0,50} Current Moon & Forecast ${swapbar 0,50}
${color5}${execi 3600 echo `date --date="0 day" | awk '{print $1" "$3" "$2}'`}\
${alignr}${execi 3600 echo `date --date="1 day" | awk '{print $1" "$3" "$2}'`} ${color}
${image $HOME/1_accuweather/forecast_2016/forecast_1.png -p 10,720 -s 45x45}\
${image $HOME/1_accuweather/forecast_2016/forecast_2.png -p 236,720 -s 45x45}\
${if_match "${execpi 300 sed -n '4p' /home/minchionne/1_accuweather/first_days}" == "Lo"}\
${else}${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}${endif}\
${alignr 55}${execi 300 sed -n '8p' ~/1_accuweather/first_days}

${goto 60}${if_match "${execpi 300 sed -n '3p' /home/minchionne/1_accuweather/first_days}" == "Lo"}\
${execpi 300 sed -n '4p' /home/minchionne/1_accuweather/first_days}\
${alignr https://forums.bunsenlabs.org/edit.php?id=48496#} ${execi 300 sed -n '9p' ~/1_accuweather/first_days}
${color5}${execi 3600 echo `date --date="2 day" | awk '{print $1" "$3" "$2}'`}\
${alignr}${execi 3600 echo `date --date="3 day" | awk '{print $1" "$3" "$2}'`}${color}
${image $HOME/1_accuweather/forecast_2016/forecast_3.png -p 10,785 -s 45x45}\
${image $HOME/1_accuweather/forecast_2016/forecast_4.png -p 240,785 -s 45x45}\
${execi 300 sed -n '13p' ~/1_accuweather/first_days}\
${alignr 55}${execi 300 sed -n '18p' ~/1_accuweather/first_days}

${goto 60}${execi 300 sed -n '14p' ~/1_accuweather/first_days}\
${alignr}${execi 300 sed -n '19p' ~/1_accuweather/first_days}

2017-05-07-101307_345x848_scrot.th.png
edit
meteo web,The conky just changed the S.T. At 15 degrees,as above accuweather
http://www.accuweather.com/it/it/gorlag … er/2277856

riedit

I changed the weather of the first max temperature, because in the day shift, it showed Lo, but not the max temperature.
from

${image $HOME/1_accuweather/forecast_2016/forecast_2.png -p 236,720 -s 45x45}\
${if_match "${execpi 300 sed -n '4p' /home/minchionne/1_accuweather/first_days}" == "Lo"}\

to

${image $HOME/1_accuweather/forecast_2016/forecast_2.png -p 236,720 -s 45x45}\
${if_match "${execpi 300 sed -n '1p' /home/minchionne/1_accuweather/first_days}" == "Lo"}\

I add that this conky also works with version1.10,do not know why,but it works!

Last edited by ector1935 (2017-05-08 08:35:38)

Offline

#1570 2017-05-07 13:49:20

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Good stuff!  smile


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1571 2017-05-07 18:06:54

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 854

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

ector1935 wrote:

I finally resolved,I see the weather as on accuweather.com,thank you all.

Good to know.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#1572 2017-05-08 08:44:21

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Good Morning,
Someone knows how to remove,the shadow that you see in the photo,use mate gkt3.
2017-05-07-182439_625x461_scrot.th.png
This is the conky in 1_accuweather,name .conkyrc_1_hourly_weatherfront
Unfortunately on the net I find a few discussions about this.

Offline

#1573 2017-05-08 10:42:54

TeoBigusGeekus
BL DieHard
From: /Greece/Kastoria
Registered: 2015-10-04
Posts: 854

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

I think you should change this line

own_window_type normal

to

own_window_type override

Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#1574 2017-05-08 14:36:32

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

it's a Compiz thing

somethiung along these lines for conky:

Find the name of an application

Some plugins ("Trailfocus: exclude", "Transset", etc.) require you to fill in the names (to be more precise the WM_CLASS) of the applications which it will affect. To find out the name to fill in, enter this into a terminal and click on the application's window:

xprop | grep WM_CLASS | cut -d \" -f 4

Window Types

The window_types key pair allows to limit the effect of compiz plugins to certain types of windows. Window types are as follows:

Dock, Toolbar, Menu, Utility, Splash, Normal, Dialog, ModalDialog, Fullscreen, Unknown


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1575 2017-05-08 15:03:53

ector1935
Member
Registered: 2017-05-03
Posts: 146

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Thank you for the reply @Teo and @ Sector11
I have two distro, one with compiz and one without, the one without override does not work,I removed all the edges,and I put this in the conky.:

conky.config = {
-- Create own window instead of using desktop (required in nautilus)
	own_window = true,
    own_window_type = 'desktop',
	own_window_transparent = true,
	own_window_hints = 'undecorated,below,skip_taskbar,skip_pager',

-- Use double buffering (reduces flicker, may not work for everyone)
	double_buffer = true,

-- fiddle with window
	use_spacer = 'right',
	use_xft = true,

-- Update interval in seconds
	update_interval = 3,

-- Minimum size of text area
	minimum_width = 1030, minimum_height = 300,
	maximum_width = 1030,

	override_utf8_locale = true,

-- Draw shades?
	draw_shades = true,

-- Text stuff
	draw_outline = true,-- amplifies text if yes
	draw_borders = false,
--font freesans -12
	font = 'Arial:size=9',
	uppercase = false,-- set to yes if you want all text to be in uppercase



-- Default colors and also border colors,grey90 == #e5e5e5
	default_color = '#2bef04',

	own_window_colour = 'yellow',

-- Text alignment, other possible values are commented
--alignment top_left
	alignment = 'top_right',
--alignment bottom_left
--alignment bottom_right

-- Gap between borders of screen and text
	gap_x = 10,
	gap_y = 30,

	imlib_cache_size = 0,
	text_buffer_size = 4096,

-- stuff after 'TEXT' will be formatted on screen
};

conky.text = [[
${font Arial:size=11}${color orange}HOURLY WEATHER ${font}${hr 2}${texeci 600 bash $HOME/1_accuweather/1_accuweather -h}

${execpi 600 sed -n '1,26p' $HOME/1_accuweather/altogether16}

]];

image conky Mate without compiz
http://i.imgur.com/VEEulCX.png


Tonight I try with mate + compiz, if it works as say sector11

Last edited by ector1935 (2017-05-08 15:20:44)

Offline

Board footer

Powered by FluxBB