You are not logged in.
Hi, guys! I have another issue with BL, namely, few minutes from startup connection is interrupt. I'm not far away from the router - it's just 1,5m from my laptop and there is nothing on the way. Previously I had installed Mint and I had no problem like this. I'm also running W10 and the same thing - the problem doesn't exist. The wifi card is Realtek RTL8723BE.
The funny thing is when this happens on BL, and, let's say, I lock my laptop, it doesn't accept my password when I'm coming back, which is 100% right because after reboot everything is working. Any ideas?
Thanks in advance!
Last edited by damo (2017-04-12 09:33:41)
UNIT: HP PAVILION 15 (2014)
SPEC: INTEL CORE i5-4288U CPU @ 2.60GHz // 8 GB RAM // INTEL HD4400 // HDD 1,5TB
SYSTEM: BunsenLabs 8.7 (Hydrogen)
..:: THERE ARE NO IMPOSSIBLE THINGS - THERE ARE ONLY PEOPLE WHO CAN'T DO SOMETHING ::..
Offline
That realtek card is little buggy in linux...
http://forums.debian.net/viewtopic.php?f=5&t=118557
I followed this guide (skip BIOS step and follow Debian steps):
https://chirath02.wordpress.com/2016/05 … ntu-16-04/
Last edited by apacus11 (2017-04-12 06:27:42)
Offline
I followed this guide (skip BIOS step and follow Debian steps):
https://chirath02.wordpress.com/2016/05 … ntu-16-04/
That guide should not be needed in this case
@j3rzu: the driver for your device was patched for kernel 4.1 (as explained in the fdn link) and so the kernel version from the jessie-backports repository should fix your problem.
This guide will show you how to change to the 4.x-series kernel:
https://forums.bunsenlabs.org/viewtopic.php?id=1257
Once that is done you will also have to install the firmware from backports:
sudo apt install -t jessie-backports firmware-realtek
Then reboot into the new kernel and enjoy a stable connection
If it is still unstable then turn off the power management:
Offline
I tried to install latest kernel from backports, 4.9 I think, and the dkms module failed to compile (probably my fault, too much twerking with pkgs and configs).
Don't got time to test, so I moved back to 3.* kernel.
I'm planning to wipe the HD and make a clean BL install, I'll try again.
Offline
the driver for your device was patched for kernel 4.1 (as explained in the fdn link) and so the kernel version from the jessie-backports repository should fix your problem.
MY HERO - IT WORKS!!! BIG THANKS! Solved - You can close.
UNIT: HP PAVILION 15 (2014)
SPEC: INTEL CORE i5-4288U CPU @ 2.60GHz // 8 GB RAM // INTEL HD4400 // HDD 1,5TB
SYSTEM: BunsenLabs 8.7 (Hydrogen)
..:: THERE ARE NO IMPOSSIBLE THINGS - THERE ARE ONLY PEOPLE WHO CAN'T DO SOMETHING ::..
Offline
^ Next time, you can edit the title of your first post yourself, and add [SOLVED]
Be Excellent to Each Other...
The Bunsenlabs Lithium Desktop » Here
FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt «» BunsenLabs on DeviantArt
Offline