You are not logged in.

#1401 2016-11-19 15:45:12

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,011

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

So true ... like someone's signature around here:  "I haven't failed, I found thousands of ways it doesn't work!" - a mis-quote by Edison I think it was.  smile


Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#1402 2016-11-26 00:28:29

rwyarbrough
Member
From: Mesquite, Texas
Registered: 2016-11-26
Posts: 56

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Sector11 - I have seen several very impressive chronograph conky scripts from you that I'm trying to locate. I just came accross this forum. The Ubuntu forum that I found these on at was extremely long (over 2700 pages I think) and I could only find bits and pieces of code but not the entire script within a downloadable file or single post. It also looks like you hadn't been using that forum since 2012.

Here are a couple of my favorites
http://www.linuxdigest.org/wp-content/u … ple-12.jpg.
http://imgbox.com/acmAfZlo
http://imgbox.com/acvEGu13


I like this weather conky script also.
http://imgbox.com/adtbJtwd

Can you please point me to where I can obtain these awesome conky scripts please?

Thanks

Last edited by rwyarbrough (2016-11-26 00:33:01)

Offline

#1403 2016-11-26 03:15:18

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,011

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

^ @rwyarbrough

Midnight here ... off to bed ... but yes, I can either point you to them or re-post them here.  Please lets me start tomorrow though - I am off to bed.

Or ...  start with one link - the v9000 thread at the now 'read only' CrunchBang forums.  Please do not continue that discussion here, this is Teos Bash scripts.  I will start a v9000 thread here tomorrow and contact you as well.  I think you will find the chronograph clock in that thread as well.

This is what I have been running with the v9000 script for a couple of years now:
XwSBayzZ.jpg
Don't worry, we'll get you fixed up.


Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#1404 2016-11-26 04:49:04

rwyarbrough
Member
From: Mesquite, Texas
Registered: 2016-11-26
Posts: 56

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Thanks Sector11, I grabbed the v9000 script kit (v9000_update.tar.gz) from the CrunchBang forum and started to go through the 46 pages in that thread trying to find the chronograph clock. It's 10:30 PM for me now (central time zone) and I made it through page 18 before the wife put an abrupt stop to my searching.

I appreciate the help and you helping me get fixed up. I've always been a fan of chronograph clocks and older analog gauges, nixie tubes, old frankenstein type enclosures and such.

I'm super excited about finally getting conky setup like I want it.

Thanks again.

Offline

#1405 2016-11-26 17:22:18

fvirgola80
Member
From: Italy / Rome
Registered: 2015-10-08
Posts: 262

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Hello rwyarbrough,
I show my V9000 with customizations that with time and with the help of my teachers and Sector11 TEO I realized.

fv80v9000.png

wink  wink

Last edited by fvirgola80 (2016-11-26 17:24:29)


Nothing happens by chance

Offline

#1406 2016-11-26 18:08:54

rwyarbrough
Member
From: Mesquite, Texas
Registered: 2016-11-26
Posts: 56

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Removed due to incorrect forum submission

Last edited by rwyarbrough (2016-12-04 21:42:43)

Offline

#1407 2016-11-26 18:20:27

rwyarbrough
Member
From: Mesquite, Texas
Registered: 2016-11-26
Posts: 56

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

fvirgola80 wrote:

I show my V9000 with customizations that with time and with the help of my teachers and Sector11 TEO I realized.

WOW!!! GREAT work! If I can learn how to code at least half as well as yourself, Sector 11 and TEO, I might be able to begin to make my own conkys from scratch. What a fine collection of talented conky experts on this forum! I hit the jackpot as I was really struggling.

I like EVERYTHING about your theme. The info bar on the right side is perfect. The chronograph on the left is awesome! I really like the weather information layout as well. How hard would it be for me to talk you into sharing your conky scripts so I can use it on my system? I'm a conky beginner, so unfortunately I would need everything.

Last edited by rwyarbrough (2016-11-26 18:26:46)

Offline

#1408 2016-11-26 18:36:40

rwyarbrough
Member
From: Mesquite, Texas
Registered: 2016-11-26
Posts: 56

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Sector11 wrote:

This is what I have been running with the v9000 script for a couple of years now:
https://6-t.imgbox.com/XwSBayzZ.jpg

I really like this and I am so impressed with the work.

With my screen layout (using Gnome classic, but still experimenting around with several others like cinnamon)  not sure if I would be better off with the horizontal or vertical approach with the weather information boxes.

Everyone here is so considerate and helpful. Thanks in advance for pointing me to or reposting your work here when you get a chance.

They say learning to program starts with finding good code and "borrowing" and modifying to make it your own. As great as all of the themes are that I am seeing here, I don't see making very many changes at all.

Thanks again and great stuff.

Last edited by rwyarbrough (2016-11-26 19:05:46)

Offline

#1409 2016-11-26 19:35:33

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,011

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

IF I may make a suggestion.  You are in one hell of a weather script thread right here.  Rather than play with v9000 (which BTW is rather complicated to configure) play with Teo's script's right here  Adding a LUA clock to them is nothing and you'll have a LOT of people here to help you.  Self included.

The images you linked to are OLD and possibly using conkyForecast (2011) or an older Teo script that is no longer active.

I will however post that v9000 template for you.


Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#1410 2016-11-26 22:53:32

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,011

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

I'm having a problem finding a working version of my chronograph.  I simply have too many conky scripts here  sad

FOUND THEM - Tucked away on a little used partition under /media/10/Konky

Copied them to /media/5/Conky and YES!  HUSTON we have power ... not quite lift off but we have power!

FREE SAMPLE: All based on TBG's Wuinderground script (obviously an older version)
zqr0EJie.jpg

Ahhhhhhhhhhh back at the conky keyboard again - - - life is good!


Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#1411 2016-11-27 03:08:47

rwyarbrough
Member
From: Mesquite, Texas
Registered: 2016-11-26
Posts: 56

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

As many different conkys you have - you could have eight different themes active at the same time - 4 workspaces with dual monitors - one theme per monitor for the 4 different workspaces. Never a dull moment!

Offline

#1412 2016-11-27 04:57:31

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,011

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

^  HEY TEO!!!!!   Should I tell him?

]:D  ]:D  ]:D  ]:D


Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#1413 2016-11-27 07:57:05

TeoBigusGeekus
BL DieHard
From: /Deutschland/Frankfurt_am_Main
Registered: 2015-10-04
Posts: 1,486

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

rwyarbrough wrote:

As many different conkys you have - you could have eight different themes active at the same time - 4 workspaces with dual monitors - one theme per monitor for the 4 different workspaces. Never a dull moment!

Let me introduce you to S11, a master and a scholar... wink


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#1414 2016-11-27 17:22:08

Nili
Member
From: $HOME/♫♪
Registered: 2015-09-30
Posts: 1,271
Website

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

S11 is like a NOA for Linux, or Weather spaces station sometimes tongue


Tumbleweed (Server) | KDE Plasma (Wayland)

Offline

#1415 2016-11-27 18:01:17

TeoBigusGeekus
BL DieHard
From: /Deutschland/Frankfurt_am_Main
Registered: 2015-10-04
Posts: 1,486

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

He's a satellite himself.


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

#1416 2016-11-27 18:15:44

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,011

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

@ Nili - NOA?

Hey and I did Weather in space Space too ... The "centre" panel in the Space Shuttle actually rotated through the various (real) landing sites the shuttle could use.  Managed that with woulf's "rotating.lua" script.   Of course it's old, using ConkyForecast that is now defunct.  Adaptable to any of Teo's scripts though.

Space Shuttle (the tar.gz) and then jumped into the future and went into Deep Space (the tar.gz)

mrpeachy and woulf - two of LUA's greats as far as I am concerned.

@ Teo - Yea, well if that's true, I need new parts!  lol lol


Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#1417 2016-11-27 18:25:53

Nili
Member
From: $HOME/♫♪
Registered: 2015-09-30
Posts: 1,271
Website

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Sector11 wrote:

@ Nili - NOA?

A small correction, it's called NOAA Weather Radio somewhere in the USA.


Tumbleweed (Server) | KDE Plasma (Wayland)

Offline

#1418 2016-11-27 19:13:07

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,011

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

OH that NOAA, you'd be surprised what searching for NOA brings up.  Like a female singer Noa, blah blag ...

Anyway I don't limit myself to the USA - not being in the US it would be silly of me to do so.  smile

But I get the idea.  AND I'll take that as a compliment!   smile

Also, I have to admit, my interest in weather is a lot older than my interest in conky, by at least 30+ years.  So one can imagine how happy I was to discover they work well together.  smile

But I also have to disagree, I'm not like NOAA for Linux, that would be for people like lvph, Vaphell, kaivalagi, TeoBigusGeekus and others that create the scripts that collect the data.

I'm like the Local Weatherman for Linux that reports the weather.  ie: like lvph's script that I run in OB:
BL3zTHBZ.jpg
I've got weather coming out of my ears.  smile

... back to the drawing board


Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

#1419 2016-11-27 20:24:11

unklar
Back to the roots 1.9
From: #! BL
Registered: 2015-10-31
Posts: 2,648

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Sector11 wrote:

Space Shuttle (the tar.gz) and then jumped into the future and went into Deep Space (the tar.gz)

Oh Man, those were still times. smile
I do not remember when I saw this picture for the first time. I know, however, that I wondered how this crazy Conky guy got the data into the cockpit. ]:D

The co-pilots Gutterslob I unfortunately never got to know. Ingeniously the button for the coffee "C off" on the "SS Statler 19 August 11".   big_smile  big_smile

absolutely awesome


Sorry @Teo   wink

Offline

#1420 2016-11-27 21:43:45

TeoBigusGeekus
BL DieHard
From: /Deutschland/Frankfurt_am_Main
Registered: 2015-10-04
Posts: 1,486

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

cool   lol


Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!

Offline

Board footer

Powered by FluxBB