You are not logged in.

#1 2016-10-02 21:33:40

Zargando
Member
Registered: 2016-09-29
Posts: 21

Wifi LED not working

---Mod edit: split from [SOLVED] thread https://forums.bunsenlabs.org/viewtopic … 127#p34127---

I am having the same issue, my wifi works but the LED indicator does not work. It stays blue the whole time, it should be orange when wifi is off and blue when on. The button works when pressed, not the light.
It is a laptop pavillion dv-6. Now i see the above post and before i try anything i will copy my result from the lspci command because i see my BCM is 4312 and not BCM 4313, does it make any difference ?

02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:1508]
	Kernel driver in use: b43-pci-bridge
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:3628]
	Kernel driver in use: r8169 

Last edited by damo (2016-10-02 22:06:29)

Offline

#2 2016-10-02 22:23:51

Zargando
Member
Registered: 2016-09-29
Posts: 21

Re: Wifi LED not working

"Update" - went ahead and tried cmd install broadcom-sta-dkms this is the result

02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
    Subsystem: Hewlett-Packard Company Device [103c:1508]
    Kernel driver in use: b43-pci-bridge
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3628]
    Kernel driver in use: r8169

The only difference is that now i do not have WiFi anymore, LED not working and also nm-applet has no wifi ?

Offline

#3 2016-10-02 22:31:37

Horizon_Brave
Operating System: Linux-Nettrix
Registered: 2015-10-18
Posts: 1,473

Re: Wifi LED not working

Did you reboot? You're still using the same b43 driver. You have insert the new sta-dkms  driver for it to be used.

First do an

lsmod | grep broadcom

just to make sure you do indeed have it downloaded...

Then try to actually use it with :

modprobe -v broadcom-sta-dkms

"I have not failed, I have found 10,000 ways that will not work" -Edison

Offline

#4 2016-10-02 23:05:02

Zargando
Member
Registered: 2016-09-29
Posts: 21

Re: Wifi LED not working

i thought i did it correct, but i see the error in installing broadcom-sta-dkms

Error! Bad return status for module build on kernel: 4.7.0-0.bpo.1-amd64 (x86_64)
Consult /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log for more information

So now also lspci looks different

02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
    Subsystem: Hewlett-Packard Company Device [103c:1508]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:3628]
    Kernel driver in use: r8169


and this comes from the log:

 DKMS make.log for broadcom-sta-6.30.223.271 for kernel 4.7.0-0.bpo.1-amd64 (x86_64)
ma okt  3 00:59:56 CEST 2016
/bin/sh: 1: [: Illegal number: 
/bin/sh: 1: [: Illegal number: 
Wireless Extension is the only possible API for this kernel version
Using Wireless Extension API
KBUILD_NOPEDANTIC=1 make -C /lib/modules/4.7.0-0.bpo.1-amd64/build M=`pwd`
make[1]: Waarschuwing: taakserver is onbeschikbaar: '-j1' wordt gebruikt.  Voeg '+' toe aan de ouderregel.
make[1]: Map '/usr/src/linux-headers-4.7.0-0.bpo.1-amd64' wordt binnengegaan
CFG80211 API is prefered for this kernel version
Using CFG80211 API
Kernel architecture is X86_64
  LD      /var/lib/dkms/broadcom-sta/6.30.223.271/build/built-in.o
  CC [M]  /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/shared/linux_osl.o
  CC [M]  /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_linux.o
  CC [M]  /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_iw.o
  CC [M]  /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.o
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:239:12: error: ‘IEEE80211_BAND_2GHZ’ undeclared here (not in a function)
  .band   = IEEE80211_BAND_2GHZ,  \
            ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:285:2: note: in expansion of macro ‘CHAN2G’
  CHAN2G(1, 2412, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:248:12: error: ‘IEEE80211_BAND_5GHZ’ undeclared here (not in a function)
  .band   = IEEE80211_BAND_5GHZ,  \
            ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:302:2: note: in expansion of macro ‘CHAN5G’
  CHAN5G(34, 0), CHAN5G(36, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:302:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:302:2: error: (near initialization for ‘__wl_5ghz_a_channels[0].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:302:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:302:2: error: (near initialization for ‘__wl_5ghz_a_channels[1].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:303:2: error: initializer element is not constant
  CHAN5G(38, 0), CHAN5G(40, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:303:2: error: (near initialization for ‘__wl_5ghz_a_channels[2].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:303:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:303:2: error: (near initialization for ‘__wl_5ghz_a_channels[3].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:304:2: error: initializer element is not constant
  CHAN5G(42, 0), CHAN5G(44, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:304:2: error: (near initialization for ‘__wl_5ghz_a_channels[4].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:304:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:304:2: error: (near initialization for ‘__wl_5ghz_a_channels[5].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:305:2: error: initializer element is not constant
  CHAN5G(46, 0), CHAN5G(48, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:305:2: error: (near initialization for ‘__wl_5ghz_a_channels[6].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:305:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:305:2: error: (near initialization for ‘__wl_5ghz_a_channels[7].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:306:2: error: initializer element is not constant
  CHAN5G(52, 0), CHAN5G(56, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:306:2: error: (near initialization for ‘__wl_5ghz_a_channels[8].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:306:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:306:2: error: (near initialization for ‘__wl_5ghz_a_channels[9].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:307:2: error: initializer element is not constant
  CHAN5G(60, 0), CHAN5G(64, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:307:2: error: (near initialization for ‘__wl_5ghz_a_channels[10].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:307:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:307:2: error: (near initialization for ‘__wl_5ghz_a_channels[11].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:308:2: error: initializer element is not constant
  CHAN5G(100, 0), CHAN5G(104, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:308:2: error: (near initialization for ‘__wl_5ghz_a_channels[12].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:308:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:308:2: error: (near initialization for ‘__wl_5ghz_a_channels[13].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:309:2: error: initializer element is not constant
  CHAN5G(108, 0), CHAN5G(112, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:309:2: error: (near initialization for ‘__wl_5ghz_a_channels[14].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:309:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:309:2: error: (near initialization for ‘__wl_5ghz_a_channels[15].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:310:2: error: initializer element is not constant
  CHAN5G(116, 0), CHAN5G(120, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:310:2: error: (near initialization for ‘__wl_5ghz_a_channels[16].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:310:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:310:2: error: (near initialization for ‘__wl_5ghz_a_channels[17].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:311:2: error: initializer element is not constant
  CHAN5G(124, 0), CHAN5G(128, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:311:2: error: (near initialization for ‘__wl_5ghz_a_channels[18].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:311:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:311:2: error: (near initialization for ‘__wl_5ghz_a_channels[19].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:312:2: error: initializer element is not constant
  CHAN5G(132, 0), CHAN5G(136, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:312:2: error: (near initialization for ‘__wl_5ghz_a_channels[20].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:312:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:312:2: error: (near initialization for ‘__wl_5ghz_a_channels[21].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:313:2: error: initializer element is not constant
  CHAN5G(140, 0), CHAN5G(149, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:313:2: error: (near initialization for ‘__wl_5ghz_a_channels[22].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:313:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:313:2: error: (near initialization for ‘__wl_5ghz_a_channels[23].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:314:2: error: initializer element is not constant
  CHAN5G(153, 0), CHAN5G(157, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:314:2: error: (near initialization for ‘__wl_5ghz_a_channels[24].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:314:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:314:2: error: (near initialization for ‘__wl_5ghz_a_channels[25].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:315:2: error: initializer element is not constant
  CHAN5G(161, 0), CHAN5G(165, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:315:2: error: (near initialization for ‘__wl_5ghz_a_channels[26].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:315:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:315:2: error: (near initialization for ‘__wl_5ghz_a_channels[27].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:316:2: error: initializer element is not constant
  CHAN5G(184, 0), CHAN5G(188, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:316:2: error: (near initialization for ‘__wl_5ghz_a_channels[28].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:316:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:316:2: error: (near initialization for ‘__wl_5ghz_a_channels[29].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:317:2: error: initializer element is not constant
  CHAN5G(192, 0), CHAN5G(196, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:317:2: error: (near initialization for ‘__wl_5ghz_a_channels[30].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:317:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:317:2: error: (near initialization for ‘__wl_5ghz_a_channels[31].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:318:2: error: initializer element is not constant
  CHAN5G(200, 0), CHAN5G(204, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:318:2: error: (near initialization for ‘__wl_5ghz_a_channels[32].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:318:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:318:2: error: (near initialization for ‘__wl_5ghz_a_channels[33].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:319:2: error: initializer element is not constant
  CHAN5G(208, 0), CHAN5G(212, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:319:2: error: (near initialization for ‘__wl_5ghz_a_channels[34].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:319:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:319:2: error: (near initialization for ‘__wl_5ghz_a_channels[35].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:320:2: error: initializer element is not constant
  CHAN5G(216, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:320:2: error: (near initialization for ‘__wl_5ghz_a_channels[36].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:324:2: error: initializer element is not constant
  CHAN5G(32, 0), CHAN5G(34, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:324:2: error: (near initialization for ‘__wl_5ghz_n_channels[0].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:324:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:324:2: error: (near initialization for ‘__wl_5ghz_n_channels[1].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:325:2: error: initializer element is not constant
  CHAN5G(36, 0), CHAN5G(38, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:325:2: error: (near initialization for ‘__wl_5ghz_n_channels[2].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:325:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:325:2: error: (near initialization for ‘__wl_5ghz_n_channels[3].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:326:2: error: initializer element is not constant
  CHAN5G(40, 0), CHAN5G(42, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:326:2: error: (near initialization for ‘__wl_5ghz_n_channels[4].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:326:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:326:2: error: (near initialization for ‘__wl_5ghz_n_channels[5].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:327:2: error: initializer element is not constant
  CHAN5G(44, 0), CHAN5G(46, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:327:2: error: (near initialization for ‘__wl_5ghz_n_channels[6].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:327:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:327:2: error: (near initialization for ‘__wl_5ghz_n_channels[7].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:328:2: error: initializer element is not constant
  CHAN5G(48, 0), CHAN5G(50, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:328:2: error: (near initialization for ‘__wl_5ghz_n_channels[8].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:328:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:328:2: error: (near initialization for ‘__wl_5ghz_n_channels[9].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:329:2: error: initializer element is not constant
  CHAN5G(52, 0), CHAN5G(54, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:329:2: error: (near initialization for ‘__wl_5ghz_n_channels[10].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:329:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:329:2: error: (near initialization for ‘__wl_5ghz_n_channels[11].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:330:2: error: initializer element is not constant
  CHAN5G(56, 0), CHAN5G(58, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:330:2: error: (near initialization for ‘__wl_5ghz_n_channels[12].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:330:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:330:2: error: (near initialization for ‘__wl_5ghz_n_channels[13].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:331:2: error: initializer element is not constant
  CHAN5G(60, 0), CHAN5G(62, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:331:2: error: (near initialization for ‘__wl_5ghz_n_channels[14].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:331:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:331:2: error: (near initialization for ‘__wl_5ghz_n_channels[15].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:332:2: error: initializer element is not constant
  CHAN5G(64, 0), CHAN5G(66, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:332:2: error: (near initialization for ‘__wl_5ghz_n_channels[16].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:332:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:332:2: error: (near initialization for ‘__wl_5ghz_n_channels[17].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:333:2: error: initializer element is not constant
  CHAN5G(68, 0), CHAN5G(70, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:333:2: error: (near initialization for ‘__wl_5ghz_n_channels[18].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:333:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:333:2: error: (near initialization for ‘__wl_5ghz_n_channels[19].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:334:2: error: initializer element is not constant
  CHAN5G(72, 0), CHAN5G(74, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:334:2: error: (near initialization for ‘__wl_5ghz_n_channels[20].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:334:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:334:2: error: (near initialization for ‘__wl_5ghz_n_channels[21].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:335:2: error: initializer element is not constant
  CHAN5G(76, 0), CHAN5G(78, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:335:2: error: (near initialization for ‘__wl_5ghz_n_channels[22].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:335:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:335:2: error: (near initialization for ‘__wl_5ghz_n_channels[23].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:336:2: error: initializer element is not constant
  CHAN5G(80, 0), CHAN5G(82, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:336:2: error: (near initialization for ‘__wl_5ghz_n_channels[24].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:336:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:336:2: error: (near initialization for ‘__wl_5ghz_n_channels[25].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:337:2: error: initializer element is not constant
  CHAN5G(84, 0), CHAN5G(86, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:337:2: error: (near initialization for ‘__wl_5ghz_n_channels[26].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:337:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:337:2: error: (near initialization for ‘__wl_5ghz_n_channels[27].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:338:2: error: initializer element is not constant
  CHAN5G(88, 0), CHAN5G(90, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:338:2: error: (near initialization for ‘__wl_5ghz_n_channels[28].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:338:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:338:2: error: (near initialization for ‘__wl_5ghz_n_channels[29].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:339:2: error: initializer element is not constant
  CHAN5G(92, 0), CHAN5G(94, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:339:2: error: (near initialization for ‘__wl_5ghz_n_channels[30].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:339:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:339:2: error: (near initialization for ‘__wl_5ghz_n_channels[31].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:340:2: error: initializer element is not constant
  CHAN5G(96, 0), CHAN5G(98, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:340:2: error: (near initialization for ‘__wl_5ghz_n_channels[32].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:340:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:340:2: error: (near initialization for ‘__wl_5ghz_n_channels[33].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:341:2: error: initializer element is not constant
  CHAN5G(100, 0), CHAN5G(102, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:341:2: error: (near initialization for ‘__wl_5ghz_n_channels[34].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:341:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:341:2: error: (near initialization for ‘__wl_5ghz_n_channels[35].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:342:2: error: initializer element is not constant
  CHAN5G(104, 0), CHAN5G(106, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:342:2: error: (near initialization for ‘__wl_5ghz_n_channels[36].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:342:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:342:2: error: (near initialization for ‘__wl_5ghz_n_channels[37].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:343:2: error: initializer element is not constant
  CHAN5G(108, 0), CHAN5G(110, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:343:2: error: (near initialization for ‘__wl_5ghz_n_channels[38].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:343:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:343:2: error: (near initialization for ‘__wl_5ghz_n_channels[39].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:344:2: error: initializer element is not constant
  CHAN5G(112, 0), CHAN5G(114, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:344:2: error: (near initialization for ‘__wl_5ghz_n_channels[40].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:344:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:344:2: error: (near initialization for ‘__wl_5ghz_n_channels[41].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:345:2: error: initializer element is not constant
  CHAN5G(116, 0), CHAN5G(118, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:345:2: error: (near initialization for ‘__wl_5ghz_n_channels[42].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:345:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:345:2: error: (near initialization for ‘__wl_5ghz_n_channels[43].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:346:2: error: initializer element is not constant
  CHAN5G(120, 0), CHAN5G(122, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:346:2: error: (near initialization for ‘__wl_5ghz_n_channels[44].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:346:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:346:2: error: (near initialization for ‘__wl_5ghz_n_channels[45].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:347:2: error: initializer element is not constant
  CHAN5G(124, 0), CHAN5G(126, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:347:2: error: (near initialization for ‘__wl_5ghz_n_channels[46].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:347:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:347:2: error: (near initialization for ‘__wl_5ghz_n_channels[47].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:348:2: error: initializer element is not constant
  CHAN5G(128, 0), CHAN5G(130, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:348:2: error: (near initialization for ‘__wl_5ghz_n_channels[48].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:348:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:348:2: error: (near initialization for ‘__wl_5ghz_n_channels[49].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:349:2: error: initializer element is not constant
  CHAN5G(132, 0), CHAN5G(134, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:349:2: error: (near initialization for ‘__wl_5ghz_n_channels[50].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:349:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:349:2: error: (near initialization for ‘__wl_5ghz_n_channels[51].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:350:2: error: initializer element is not constant
  CHAN5G(136, 0), CHAN5G(138, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:350:2: error: (near initialization for ‘__wl_5ghz_n_channels[52].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:350:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:350:2: error: (near initialization for ‘__wl_5ghz_n_channels[53].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:351:2: error: initializer element is not constant
  CHAN5G(140, 0), CHAN5G(142, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:351:2: error: (near initialization for ‘__wl_5ghz_n_channels[54].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:351:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:351:2: error: (near initialization for ‘__wl_5ghz_n_channels[55].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:352:2: error: initializer element is not constant
  CHAN5G(144, 0), CHAN5G(145, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:352:2: error: (near initialization for ‘__wl_5ghz_n_channels[56].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:352:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:352:2: error: (near initialization for ‘__wl_5ghz_n_channels[57].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:353:2: error: initializer element is not constant
  CHAN5G(146, 0), CHAN5G(147, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:353:2: error: (near initialization for ‘__wl_5ghz_n_channels[58].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:353:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:353:2: error: (near initialization for ‘__wl_5ghz_n_channels[59].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:354:2: error: initializer element is not constant
  CHAN5G(148, 0), CHAN5G(149, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:354:2: error: (near initialization for ‘__wl_5ghz_n_channels[60].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:354:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:354:2: error: (near initialization for ‘__wl_5ghz_n_channels[61].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:355:2: error: initializer element is not constant
  CHAN5G(150, 0), CHAN5G(151, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:355:2: error: (near initialization for ‘__wl_5ghz_n_channels[62].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:355:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:355:2: error: (near initialization for ‘__wl_5ghz_n_channels[63].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:356:2: error: initializer element is not constant
  CHAN5G(152, 0), CHAN5G(153, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:356:2: error: (near initialization for ‘__wl_5ghz_n_channels[64].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:356:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:356:2: error: (near initialization for ‘__wl_5ghz_n_channels[65].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:357:2: error: initializer element is not constant
  CHAN5G(154, 0), CHAN5G(155, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:357:2: error: (near initialization for ‘__wl_5ghz_n_channels[66].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:357:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:357:2: error: (near initialization for ‘__wl_5ghz_n_channels[67].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:358:2: error: initializer element is not constant
  CHAN5G(156, 0), CHAN5G(157, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:358:2: error: (near initialization for ‘__wl_5ghz_n_channels[68].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:358:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:358:2: error: (near initialization for ‘__wl_5ghz_n_channels[69].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:359:2: error: initializer element is not constant
  CHAN5G(158, 0), CHAN5G(159, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:359:2: error: (near initialization for ‘__wl_5ghz_n_channels[70].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:359:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:359:2: error: (near initialization for ‘__wl_5ghz_n_channels[71].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:360:2: error: initializer element is not constant
  CHAN5G(160, 0), CHAN5G(161, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:360:2: error: (near initialization for ‘__wl_5ghz_n_channels[72].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:360:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:360:2: error: (near initialization for ‘__wl_5ghz_n_channels[73].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:361:2: error: initializer element is not constant
  CHAN5G(162, 0), CHAN5G(163, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:361:2: error: (near initialization for ‘__wl_5ghz_n_channels[74].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:361:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:361:2: error: (near initialization for ‘__wl_5ghz_n_channels[75].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:362:2: error: initializer element is not constant
  CHAN5G(164, 0), CHAN5G(165, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:362:2: error: (near initialization for ‘__wl_5ghz_n_channels[76].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:362:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:362:2: error: (near initialization for ‘__wl_5ghz_n_channels[77].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:363:2: error: initializer element is not constant
  CHAN5G(166, 0), CHAN5G(168, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:363:2: error: (near initialization for ‘__wl_5ghz_n_channels[78].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:363:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:363:2: error: (near initialization for ‘__wl_5ghz_n_channels[79].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:364:2: error: initializer element is not constant
  CHAN5G(170, 0), CHAN5G(172, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:364:2: error: (near initialization for ‘__wl_5ghz_n_channels[80].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:364:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:364:2: error: (near initialization for ‘__wl_5ghz_n_channels[81].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:365:2: error: initializer element is not constant
  CHAN5G(174, 0), CHAN5G(176, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:365:2: error: (near initialization for ‘__wl_5ghz_n_channels[82].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:365:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:365:2: error: (near initialization for ‘__wl_5ghz_n_channels[83].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:366:2: error: initializer element is not constant
  CHAN5G(178, 0), CHAN5G(180, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:366:2: error: (near initialization for ‘__wl_5ghz_n_channels[84].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:366:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:366:2: error: (near initialization for ‘__wl_5ghz_n_channels[85].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:367:2: error: initializer element is not constant
  CHAN5G(182, 0), CHAN5G(184, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:367:2: error: (near initialization for ‘__wl_5ghz_n_channels[86].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:367:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:367:2: error: (near initialization for ‘__wl_5ghz_n_channels[87].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:368:2: error: initializer element is not constant
  CHAN5G(186, 0), CHAN5G(188, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:368:2: error: (near initialization for ‘__wl_5ghz_n_channels[88].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:368:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:368:2: error: (near initialization for ‘__wl_5ghz_n_channels[89].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:369:2: error: initializer element is not constant
  CHAN5G(190, 0), CHAN5G(192, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:369:2: error: (near initialization for ‘__wl_5ghz_n_channels[90].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:369:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:369:2: error: (near initialization for ‘__wl_5ghz_n_channels[91].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:370:2: error: initializer element is not constant
  CHAN5G(194, 0), CHAN5G(196, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:370:2: error: (near initialization for ‘__wl_5ghz_n_channels[92].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:370:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:370:2: error: (near initialization for ‘__wl_5ghz_n_channels[93].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:371:2: error: initializer element is not constant
  CHAN5G(198, 0), CHAN5G(200, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:371:2: error: (near initialization for ‘__wl_5ghz_n_channels[94].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:371:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:371:2: error: (near initialization for ‘__wl_5ghz_n_channels[95].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:372:2: error: initializer element is not constant
  CHAN5G(202, 0), CHAN5G(204, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:372:2: error: (near initialization for ‘__wl_5ghz_n_channels[96].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:372:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:372:2: error: (near initialization for ‘__wl_5ghz_n_channels[97].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:373:2: error: initializer element is not constant
  CHAN5G(206, 0), CHAN5G(208, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:373:2: error: (near initialization for ‘__wl_5ghz_n_channels[98].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:373:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:373:2: error: (near initialization for ‘__wl_5ghz_n_channels[99].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:374:2: error: initializer element is not constant
  CHAN5G(210, 0), CHAN5G(212, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:374:2: error: (near initialization for ‘__wl_5ghz_n_channels[100].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:374:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:374:2: error: (near initialization for ‘__wl_5ghz_n_channels[101].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:375:2: error: initializer element is not constant
  CHAN5G(214, 0), CHAN5G(216, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:375:2: error: (near initialization for ‘__wl_5ghz_n_channels[102].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:375:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:375:2: error: (near initialization for ‘__wl_5ghz_n_channels[103].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:376:2: error: initializer element is not constant
  CHAN5G(218, 0), CHAN5G(220, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:376:2: error: (near initialization for ‘__wl_5ghz_n_channels[104].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:376:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:376:2: error: (near initialization for ‘__wl_5ghz_n_channels[105].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:377:2: error: initializer element is not constant
  CHAN5G(222, 0), CHAN5G(224, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:377:2: error: (near initialization for ‘__wl_5ghz_n_channels[106].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:377:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:377:2: error: (near initialization for ‘__wl_5ghz_n_channels[107].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:378:2: error: initializer element is not constant
  CHAN5G(226, 0), CHAN5G(228, 0),
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:378:2: error: (near initialization for ‘__wl_5ghz_n_channels[108].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:378:2: error: initializer element is not constant
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:378:2: error: (near initialization for ‘__wl_5ghz_n_channels[109].band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:382:2: error: initializer element is not constant
  .band = IEEE80211_BAND_2GHZ,
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:382:2: error: (near initialization for ‘__wl_band_2ghz.band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:390:2: error: initializer element is not constant
  .band = IEEE80211_BAND_5GHZ,
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:390:2: error: (near initialization for ‘__wl_band_5ghz_a.band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:398:2: error: initializer element is not constant
  .band = IEEE80211_BAND_5GHZ,
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:398:2: error: (near initialization for ‘__wl_band_5ghz_n.band’)
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_alloc_wdev’:
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:1879:20: error: array subscript is not an integer
  wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz;
                    ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:1879:2: warning: statement with no effect [-Wunused-value]
  wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &__wl_band_2ghz;
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:1880:20: error: array subscript is not an integer
  wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_a; 
                    ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:1880:2: warning: statement with no effect [-Wunused-value]
  wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_a; 
  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_inform_single_bss’:
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:2001:9: error: incompatible type for argument 2 of ‘ieee80211_channel_to_frequency’
  freq = ieee80211_channel_to_frequency(notif_bss_info->channel,
         ^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.7.0-0.bpo.1-common/include/net/cfg80211.h:3648:5: note: expected ‘enum nl80211_band’ but argument is of type ‘struct ieee80211_channel *’
 int ieee80211_channel_to_frequency(int chan, enum nl80211_band band);
     ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:2001:7: warning: assignment makes integer from pointer without a cast
  freq = ieee80211_channel_to_frequency(notif_bss_info->channel,
       ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_notify_connect_status’:
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:2119:9: warning: assignment makes integer from pointer without a cast
    band = (chan <= CH_MAX_2G_CHANNEL) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
         ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_ch_to_chanspec’:
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:2253:18: warning: comparison between pointer and integer
   if (chan->band == IEEE80211_BAND_2GHZ) {
                  ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:2256:23: warning: comparison between pointer and integer
   else if (chan->band == IEEE80211_BAND_5GHZ) {
                       ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_update_wiphybands’:
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:2888:15: error: array subscript is not an integer
   wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_n;
               ^
/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.c:2888:3: warning: statement with no effect [-Wunused-value]
   wiphy->bands[IEEE80211_BAND_5GHZ] = &__wl_band_5ghz_n;
   ^
/usr/src/linux-headers-4.7.0-0.bpo.1-common/scripts/Makefile.build:294: recept voor doel '/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.o' is mislukt
make[4]: *** [/var/lib/dkms/broadcom-sta/6.30.223.271/build/src/wl/sys/wl_cfg80211_hybrid.o] Fout 1
/usr/src/linux-headers-4.7.0-0.bpo.1-common/Makefile:1474: recept voor doel '_module_/var/lib/dkms/broadcom-sta/6.30.223.271/build' is mislukt
make[3]: *** [_module_/var/lib/dkms/broadcom-sta/6.30.223.271/build] Fout 2
Makefile:150: recept voor doel 'sub-make' is mislukt
make[2]: *** [sub-make] Fout 2
Makefile:8: recept voor doel 'all' is mislukt
make[1]: *** [all] Fout 2
make[1]: Map '/usr/src/linux-headers-4.7.0-0.bpo.1-amd64' wordt verlaten
Makefile:177: recept voor doel 'all' is mislukt
make: *** [all] Fout 2 

Last edited by Zargando (2016-10-02 23:13:58)

Offline

#5 2016-10-02 23:34:27

Horizon_Brave
Operating System: Linux-Nettrix
Registered: 2015-10-18
Posts: 1,473

Re: Wifi LED not working

Well, what command did you run exactly to install the broadcom-sta-dkms  module?

Can you post the output of

apt-cache policy broadcom-sta-dkms 

"I have not failed, I have found 10,000 ways that will not work" -Edison

Offline

#6 2016-10-02 23:43:42

Zargando
Member
Registered: 2016-09-29
Posts: 21

Re: Wifi LED not working

command used :sudo apt-get install broadcom-sta-dkms

and this is the output :

Geïnstalleerd: 6.30.223.271-2~bpo8+1
  Kandidaat:     6.30.223.271-2~bpo8+1
  Versietabel:
*** 6.30.223.271-2~bpo8+1 0
        100 http://httpredir.debian.org/debian/ jessie-backports/non-free amd64 Packages
        100 /var/lib/dpkg/status
     6.30.223.248-3 0
        500 http://httpredir.debian.org/debian/ jessie/non-free amd64 Packages

Offline

#7 2016-10-03 06:23:08

Head_on_a_Stick
Member
From: London
Registered: 2015-09-29
Posts: 8,759
Website

Re: Wifi LED not working

Do you have the kernel headers?

https://packages.debian.org/jessie-back … ders-amd64

See https://wiki.debian.org/wl#Installation

EDIT: this may not fix things, I think there's a problem with 4.7 kernels & the Broadcom modules.

http://forums.debian.net/viewtopic.php?f=7&t=130041

One of the risks of using backports, I'm afraid...
hmm

Also, when posting command output, please use LC_ALL=C before the command to ensure that the output is in English; for example:

LC_ALL=C apt-cache policy broadcom-sta-dkms

Last edited by Head_on_a_Stick (2016-10-03 06:52:33)


“Et ignotas animum dimittit in artes.” — Ovid, Metamorphoses, VIII., 18.

Forum Rules   •   How to report a problem   •   Software that rocks

Offline

#8 2016-10-03 11:11:48

Zargando
Member
Registered: 2016-09-29
Posts: 21

Re: Wifi LED not working

Thank you HoaS, i installed from the link you gave me, but to no prevail. From reading the post over at debian forum, i guess i will have to wait for a fix sad

Thank you for pointing me in that direction, i was already getting frustrated with it, also thank you Horizon_Brave for your help.

Offline

#9 2016-10-03 15:22:12

Horizon_Brave
Operating System: Linux-Nettrix
Registered: 2015-10-18
Posts: 1,473

Re: Wifi LED not working

Sorry it didn't work out Zargando...sometimes with Linux (and backporting specifically) , you gotta wait for some upstream fixes before things can play right..


"I have not failed, I have found 10,000 ways that will not work" -Edison

Offline

#10 2016-10-03 17:46:00

Head_on_a_Stick
Member
From: London
Registered: 2015-09-29
Posts: 8,759
Website

Re: Wifi LED not working

Zargando wrote:

i installed from the link you gave me, but to no prevail.

Did you install broadcom-sta-dkms from jessie-backports?

The module package must match the kernel & headers for the compilation to work.

Did your system attempt to build the Broadcom kernel modules again after you installed the headers?

Was the error message the same?

You can try to force a re-build if there wasn't a trigger by using:

sudo aptitude reinstall -t jessie-backports broadcom-sta-dkms

Then check the kernel module in use with `lspci -k`

Also, why are you using the backported kernel?

You could boot from the vanilla kernel instead and build the modules from that.


“Et ignotas animum dimittit in artes.” — Ovid, Metamorphoses, VIII., 18.

Forum Rules   •   How to report a problem   •   Software that rocks

Offline

#11 2016-10-03 20:38:08

Zargando
Member
Registered: 2016-09-29
Posts: 21

Re: Wifi LED not working

I tried so many things today that my head is spinning and i do not know anymore all the steps i took. I guess more noobs with linux made this mistake at first hmm. But ofcourse i am thankfull with the help and tips HoaS and H_B gave me smile

One thing i know for sure is broadcom jessie-backports together with kernel 4.07 does my wifi no good. When i revert back to kernel 3.16 and use broadcom stable, things are back to normal, LED works like it should and wifi is back. As soon broadcom backports and kernel 4.07 are installed things get messed up.

I guess my last question with this is...if i keep using kernel 3.16 (while 4.07 is available), will that be a good or bad idea ?

Last edited by Zargando (2016-10-03 20:38:30)

Offline

#12 2016-10-03 20:47:30

Horizon_Brave
Operating System: Linux-Nettrix
Registered: 2015-10-18
Posts: 1,473

Re: Wifi LED not working

Zargando wrote:

I tried so many things today that my head is spinning and i do not know anymore all the steps i took. I guess more noobs with linux made this mistake at first hmm. But ofcourse i am thankfull with the help and tips HoaS and H_B gave me smile

One thing i know for sure is broadcom jessie-backports together with kernel 4.07 does my wifi no good. When i revert back to kernel 3.16 and use broadcom stable, things are back to normal, LED works like it should and wifi is back. As soon broadcom backports and kernel 4.07 are installed things get messed up.

I guess my last question with this is...if i keep using kernel 3.16 (while 4.07 is available), will that be a good or bad idea ?


Well you realize that Debian Stable, what we use here for stability and as a solid foundation *is*  using 3.16. Yes newer kernel version are available and used on other distro's like Ubuntu I believe but it's at your risk of running into "Unstable" issues. People do it all the time, but there's that word of warning. 3.16 is the current stable bound release of Debian.  So yes, to answer your question it's a great idea to stick with 3.16 since it's supported, looked after and methodically cared for.   If you want to experiment with newer Kernel releases, you should try downloading something like Virtualbox and revving up a few VM's using newer kernel releases to test.


"I have not failed, I have found 10,000 ways that will not work" -Edison

Offline

#13 2016-10-03 20:50:53

Head_on_a_Stick
Member
From: London
Registered: 2015-09-29
Posts: 8,759
Website

Re: Wifi LED not working

Zargando wrote:

if i keep using kernel 3.16 (while 4.07 is available), will that be a good or bad idea ?

I would strongly recommend sticking with kernel 3.16

The backported kernel should only be used to address specific issues.

For BunsenLabs, a higher kernel version is *not* "better", regressions are unfortunately common in Linux.


“Et ignotas animum dimittit in artes.” — Ovid, Metamorphoses, VIII., 18.

Forum Rules   •   How to report a problem   •   Software that rocks

Offline

#14 2016-10-03 21:02:57

Zargando
Member
Registered: 2016-09-29
Posts: 21

Re: Wifi LED not working

@Head_on_a_Stick
@Horizon_Brave

Thank you both for the clear answer, i learned my lesson today.
The advantage was that i also learned from messing things up. The tip of using Virtualbox and experiment in a virtual environment sounds good, will do that.

Last edited by Zargando (2016-10-03 21:04:15)

Offline

Board footer

Powered by FluxBB