#1 2016-06-29 20:42:01

yasuke1

New Member

Registered: 2016-06-24

Posts: 3

[SOLVED] Skylake, no audio

Hey, guys. I have troubleshooted the audio problem as per the sticky, but I never had the problem that the sticky seems to fix in the first place. The nature of my problem is that everything is set up properly, but I still receive no actual audio. I'm on the latest kernel, 4.6, volti is routed correctly, and I still am not getting any audio played back to my headphones. Nothing is muted.

Last edited by yasuke1 (2016-07-01 17:09:43)

Head_on_a_Stick

Member

From: London

Registered: 2015-09-29

Posts: 9,093

Website

Re: [SOLVED] Skylake, no audio

Hello yasuke1, welcome to the forums

When you say that:

I still am not getting any audio played back to my headphones

Is there any sound from the main speakers?

Please run these commands and post the full output here:

uname -a
amixer
cat ~/.config/volti
pacmd list-sources
pacmd list-sinks

Please use code tags when posting terminal output to aid readability.

---

Para todos todo, para nosotros nada

yasuke1

New Member

Registered: 2016-06-24

Posts: 3

Re: [SOLVED] Skylake, no audio

Thanks for the welcome! The thing is I don't have speakers. I only have headphones, and then when I wanna display something to the TV I connect an HDMI. HDMI will play audio when I configure it to in pavucontrol, but the headphones will never play sound even though pavucontrol makes it look like they do. (Note: my headphones are in the speaker/line-out port for this)

Linux OMNITRIX 4.6.0-0.bpo.1-amd64 #1 SMP Debian 4.6.1-1~bpo8+1 (2016-06-14) x86_64 GNU/Linux

amixer output

Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 65536
  Mono:
  Front Left: Playback 65536 [100%] [off]
  Front Right: Playback 65536 [100%] [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cvolume-joined cswitch cswitch-joined
  Capture channels: Mono
  Limits: Capture 0 - 65536
  Mono: Capture 29274 [45%] [on]

cat ~/.config/volti output

cat: /home/ben/.config/volti: Is a directory

pacmd list-sources output

2 source(s) available.
  * index: 0
	name: <alsa_input.usb-046d_0819_489D4590-02-U0x46d0x819.analog-mono>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9049
	volume: mono: 29274 /  45% / -21.00 dB
	        balance 0.00
	base volume: 23253 /  35% / -27.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 1ch 48000Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	fixed latency: 99.94 ms
	card: 0 <alsa_card.usb-046d_0819_489D4590-02-U0x46d0x819>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "USB Audio"
		alsa.id = "USB Audio"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "USB Device 0x46d:0x819"
		alsa.long_card_name = "USB Device 0x46d:0x819 at usb-0000:00:14.0-6, high speed"
		alsa.driver_name = "snd_usb_audio"
		device.bus_path = "pci-0000:00:14.0-usb-0:6:1.2"
		sysfs.path = "/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/sound/card1"
		udev.id = "usb-046d_0819_489D4590-02-U0x46d0x819"
		device.bus = "usb"
		device.vendor.id = "046d"
		device.vendor.name = "Logitech, Inc."
		device.product.id = "0819"
		device.product.name = "Webcam C210"
		device.serial = "046d_0819_489D4590"
		device.form_factor = "webcam"
		device.string = "hw:1"
		device.buffering.buffer_size = "9594"
		device.buffering.fragment_size = "2398"
		device.access_mode = "mmap"
		device.profile.name = "analog-mono"
		device.profile.description = "Analog Mono"
		device.description = "Webcam C210 Analog Mono"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB046d:0819"
		module-udev-detect.discovered = "1"
		device.icon_name = "camera-web-usb"
	ports:
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
	active port: <analog-input-mic>
    index: 27
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo.monitor>
	driver: <module-alsa-card.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1950
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max rewind: 0 KiB
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
	monitor_of: 22
	card: 1 <alsa_card.pci-0000_00_1f.3>
	module: 7
	properties:
		device.description = "Monitor of Built-in Audio Analog Stereo"
		device.class = "monitor"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf140000 irq 128"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a170"
		device.form_factor = "internal"
		device.string = "0"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"

pacmd list-sinks output

1 sink(s) available.
  * index: 22
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9959
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: yes
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 27
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
	card: 1 <alsa_card.pci-0000_00_1f.3>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC1150 Analog"
		alsa.id = "ALC1150 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xdf140000 irq 128"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "a170"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "65536"
		device.buffering.fragment_size = "32768"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC1150"
		alsa.components = "HDA:10ec0900,1458a182,00100001 HDA:80862809,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-lineout>

hhh

Gaucho

From: High in the Custerdome

Registered: 2015-09-17

Posts: 16,174

Website

Re: [SOLVED] Skylake, no audio

In pavucontrol [Super+v] go to the Output Devices tab. Make sure it is unmuted and set the Port to Headphones, do you get sound? Also make sure the Playback tab has everything unmuted.

---

I don't care what you do at home. Would you care to explain?

yasuke1

New Member

Registered: 2016-06-24

Posts: 3

Re: [SOLVED] Skylake, no audio

YIKES! It was muted. I'm really an idiot. Ahhhhh. Sorry guys!

Head_on_a_Stick

Member

From: London

Registered: 2015-09-29

Posts: 9,093

Website

Re: [SOLVED] Skylake, no audio

cat ~/.config/volti output

cat: /home/ben/.config/volti: Is a directory

Ooops, sorry  :8

That should have been `cat ~/.config/volti/config` but it doesn't matter now

---

Para todos todo, para nosotros nada

hhh

Gaucho

From: High in the Custerdome

Registered: 2015-09-17

Posts: 16,174

Website

Re: [SOLVED] Skylake, no audio

YIKES! It was muted. I'm really an idiot. Ahhhhh. Sorry guys!

No need for an apology. There's a good chance that if you mute sound it will stay muted until you fix it via pavucontrol again (known issue). Search the forum or post back here if that's the case.

Otherwise, feel free to edit the subject of this thread to include [SOLVED].

---

I don't care what you do at home. Would you care to explain?

Horizon_Brave

Operating System: Linux-Nettrix

Registered: 2015-10-18

Posts: 1,473

Re: [SOLVED] Skylake, no audio

YIKES! It was muted. I'm really an idiot. Ahhhhh. Sorry guys!

No need for an apology. There's a good chance that if you mute sound it will stay muted until you fix it via pavucontrol again (known issue). Search the forum or post back here if that's the case.

Otherwise, feel free to edit the subject of this thread to include [SOLVED].

Yep! I got 'bit' by this too. It stays muted across reboots too which is annoying 

---

"I have not failed, I have found 10,000 ways that will not work" -Edison

Head_on_a_Stick

Member

From: London

Registered: 2015-09-29

Posts: 9,093

Website

Re: [SOLVED] Skylake, no audio

It stays muted across reboots too which is annoying 

Have you tried https://forums.bunsenlabs.org/viewtopic.php?id=2266?

---

Para todos todo, para nosotros nada