You are not logged in.
SOLVED
Boron is logging out to the lockscreen if inactive for 10 minutes. I've tried the following to try and solve:
Set Power Mgmt Settings to remain on under all conditions
LightDM GTK+ Greeter:settings (Misc) to Never
I even created a .desktop script in .config/autostart:
Type=Application
Name=Disable Screen Lock
Exec=xset s off -dpms
But no matter what, it shuts off after just 10 minutes if inactive. Any ideas?
Thanks
Last edited by benslinux (2024-02-02 13:17:40)
Offline
@benslinux
Unless
xset -q | grep timeout:
timeout: 0 cycle: 0
insert to
~/.config/bunsen/autostart
xset s 0 0
But with me it was enough to set in Power Management / Security / Light Locker all to Never and on all tabs Display Power Management On battery and Plugged in as well .
Last edited by Robi (2024-02-01 23:04:37)
...Welcome to the family...
Offline
Power Mgr was NOT set to Never, but to 'when screensaver is activated' - I though unchecking the Lock screen was enough. But I set it to 'Never' and I'm sure that will solve it - thanks!
But for the record:
ben@optiplex:~$
xset -q | grep timeout:
timeout: 600 cycle: 600
-- Not sure if you meant I should add the script IF timeout and cycle are zero? They're not as you can see. For now, I added the following anyway (but can remove it)
insert to
~/.config/bunsen/autostart
xset s 0 0
Thanks again.
Last edited by benslinux (2024-02-01 23:28:27)
Offline
But no matter what, it shuts off after just 10 minutes if inactive. Any ideas?
Thanks
BL runs the light-locker screen locker by default. The *.desktop file for it is located in /etc/xdg/autostart
Try moving that light-locker.desktop file to a temp location (as backup) and see if that fixes the problem next time you log in. I don't think you need to reboot to clear light-locker from memory.
You must unlearn what you have learned.
-- yoda
Offline
jgmenu user Numero Uno -
Setting Power Mgr Security to 'Never' fixed the logging out issue. I didn't know how to access light-locker to deactivate and thought unchecking 'Lock screen when computer is going to sleep' in Power Mgr would cover it, since I had it set never to sleep.
It's no longer logging me out but I'd still like to disable the screensaver/light-locker entirely if I can figure out how to do that. I moved the light-locker.desktop file to a temp dir as you suggested and rebooted, but it still turns off the display after 10 minutes. Thanks.
Last edited by benslinux (2024-02-02 01:43:34)
Offline
So if only blanking remained.
I simple made an experiment. The output of
xset -q
has different sections:
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 0
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
xset s 60 60
activates screensaver after a 60 second inactivity.
After login I checked with
xset -q
for me they were originally 600
That's why I put in ~/.config/bunsen/autostart the last line
## Set keyboard settings - 250 ms delay and 25 cps (characters per second) repeat rate.
## Adjust the values according to your preferances.
xset r rate 300 20
xset s 0 0
Relogin and check with
xset -q
Are there other factors that influence?
Last edited by Robi (2024-02-02 09:34:27)
...Welcome to the family...
Offline
Robi - thanks for your info, but I'm not able to understand what it means. I think you're right that xset might be the solution, but I don't know how to input the correct values.
(Logging out problem has been fixed - I had Power Mgmt Options set incorrectly). My goal now is to completely disable light-locker - I don't want the machine to go into screensaver mode - ever.
I tried this method (from BL forums past)
1. Copy the `light-locker.desktop` file from `/etc/xdg/autostart/` to `~/.config/autostart/` using the command: `cp /etc/xdg/autostart/light-locker.desktop ~/.config/autostart/light-locker.desktop`[4].
2. Open the copied file `~/.config/autostart/light-locker.desktop` in a text editor.
3. Find the line that starts with `Exec=` and comment it out by adding a `#` at the beginning of the line.
4. Save and close the file.
5. Log out and log back in for the changes to take effect
- it didn't work. Still goes into screensaver mode after 10 minutes.
Last edited by benslinux (2024-02-02 10:41:29)
Offline
Trying this as last resort:
sudo apt purge light-locker
Last edited by benslinux (2024-02-02 11:20:20)
Offline
1. Copy the `light-locker.desktop` file from `/etc/xdg/autostart/` to `~/.config/autostart/` using the command: `cp /etc/xdg/autostart/light-locker.desktop ~/.config/autostart/light-locker.desktop`[4].
2. Open the copied file `~/.config/autostart/light-locker.desktop` in a text editor.
3. Find the line that starts with `Exec=` and comment it out by adding a `#` at the beginning of the line.
4. Save and close the file.
5. Log out and log back in for the changes to take effect
I think your step 3 should be:
Add a line to the copied file:Hidden=true
Source: Arch wiki (https://wiki.archlinux.org/title/XDG_Autostart)
Offline
Jimbo_G - thanks, but I just purged light-locker from the OS. I will try that if I re-install light-locker. But with light-locker gone, it must be something else - maybe LightDM or something else that has the ability to turn off the display - ? I'm going to see if I can fix it with xset.
Offline
SOLVED
I figured out that the xfce-power-manager settings also needed to be set and they weren't. This solved it - I tend to look too deep when troubleshooting because I enjoy it - then find it's a simple GUI setting I missed. But you always learn something - thanks guys, for the education in better understanding my system.
Last edited by benslinux (2024-02-02 23:03:29)
Offline
Good.
Last edited by Robi (2024-02-02 13:36:09)
...Welcome to the family...
Offline