You are not logged in.

#1 2021-08-28 18:07:16

rbh
Moderator
From: Sweden/Vasterbotten/Rusfors
Registered: 2016-08-11
Posts: 1,182

apt key for eu.pkg.bunsenlabs.org/debian beryllium

Edit: This thread fits better in supportforum. Only one sid-box affected.
Hi!

I'm running Beryllium/Bullsey on most boxes now. Today I added
deb https://eu.pkg.bunsenlabs.org/debian beryllium as source, besides keliano.

Got error on apt-key:

Get:3 https://eu.pkg.bunsenlabs.org/debian beryllium InRelease [6269 B]
Err:3 https://eu.pkg.bunsenlabs.org/debian beryllium InRelease
  The following signatures were invalid: EXPKEYSIG A0673F72FE62D9C5 Jens John (BunsenLabs Repository Signing Key) <dev@2ion.de>
Reading package lists... Done
W: GPG error: https://eu.pkg.bunsenlabs.org/debian beryllium InRelease: The following signatures were invalid: EXPKEYSIG A0673F72FE62D9C5 Jens John (BunsenLabs Repository Signing Key) <dev@2ion.de>
E: The repository 'https://pkg.bunsenlabs.org/debian beryllium InRelease' is not signed.

No difference after re-importing apt-key as descibed on homepage or downloading and installing apt-key in Beryllium: https://eu.pkg.bunsenlabs.org/debian/po … -1_all.deb.

Last edited by rbh (2021-08-29 21:30:26)


// Regards rbh

Please read before requesting help: Guide to getting help,
Introduction to the Bunsenlabs Lithium Desktop and other help topics under "Help Resources" on the BunsenLabs menu

Offline

#2 2021-08-28 21:27:31

twoion
一期一会
Registered: 2015-08-10
Posts: 3,318

Re: apt key for eu.pkg.bunsenlabs.org/debian beryllium

I'm sorry but in a clean bullseye container I cannot reproduce this error.
Is your system time current and correct? Please provide the output of

apt-key list
date -R

as well as the full entry in sources.list. Is it source that the entry is:

deb https://eu.pkg.bunsenlabs.org/debian beryllium main

?

That is, after installing "podman", the following should produce no error but show a BL logo at the end:

podman run -i --rm debian:bullseye /bin/bash - <<<'
export DEBIAN_FRONTEND=noninteractive;
apt-get update &>/dev/null;
apt-get install -y --no-install-recommends wget gnupg2 neofetch ca-certificates 1>/dev/null;
wget -qO /tmp/keyring.deb https://eu.pkg.bunsenlabs.org/debian/pool/main/b/bunsen-keyring/bunsen-keyring_2020.10.10%2Bbl11-1_all.deb;
dpkg -i /tmp/keyring.deb 1>/dev/null;
apt-key list;
echo deb https://eu.pkg.bunsenlabs.org/debian beryllium main > /etc/apt/sources.list.d/bunsenlabs.list;
apt-get update 1>/dev/null;
apt-get install -y bunsen-os-release 1>/dev/null;
neofetch;
'

It should be said that the "official" Beryllium repo is empty except for 3 packages and not yet populated or QAed.

Offline

#3 2021-08-28 23:05:52

rbh
Moderator
From: Sweden/Vasterbotten/Rusfors
Registered: 2016-08-11
Posts: 1,182

Re: apt key for eu.pkg.bunsenlabs.org/debian beryllium

twoion wrote:

I'm sorry but in a clean bullseye container I cannot reproduce this error.

I might have been premature, I see now. This problem is only on one VM, running sid/berryllium.

Is your system time current and correct?

Yes, same time as the host, which does not have problem with the apt-key.

apt-key list

Showing only Bunsen keys

Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).
/etc/apt/trusted.gpg
--------------------
pub   rsa4096 2017-05-01 [SC] [går ut: 2021-10-17]
      E8A7 1771 F7B2 F0B3 2A31  3694 3ADA 82C1 2153 DCF1
uid           [    okänt    ] John Crawley <john@bunsenlabs.org>
sub   rsa4096 2017-05-01 [E] [går ut: 2021-10-17]
sub   rsa4096 2017-05-01 [S] [går ut: 2021-10-17]

/etc/apt/trusted.gpg.d/bunsen-keyring.gpg
-----------------------------------------
pub   rsa4096 2015-07-11 [SC] [går ut: 2030-10-08]
      3172 4784 0522 7490 BBB7  43E6 [b]A067 3F72 FE62 D9C5[/b]
uid           [    okänt    ] Jens John (BunsenLabs Repository Signing Key) <dev@2ion.de>
sub   rsa4096 2015-07-11 [E] [går ut: 2030-10-08]

/etc/apt/trusted.gpg.d/BunsenLabs-RELEASE.asc
---------------------------------------------
pub   rsa4096 2015-07-11 [SC] [utgånget: 2021-01-18]
      3172 4784 0522 7490 BBB7  43E6 [b]A067 3F72 FE62 D9C5[/b]
uid           [   utgånget  ] Jens John (BunsenLabs Repository Signing Key) <dev@2ion.de>

I was looking for key starting with "A067", but now was remindedthat the apt-response is not from the begining of the listed key...

So, I have the missing key twise, (bold above-hmm,is it not possible show bold in code-block?) but with different expiration date, one that is expired...
On the host I have:

/etc/apt/trusted.gpg.d/bunsen.key.binary.asc
--------------------------------------------
pub   rsa4096 2015-07-11 [SC] [går ut: 2030-10-08]
      3172 4784 0522 7490 BBB7  43E6 A067 3F72 FE62 D9C5
uid           [    okänt    ] Jens John (BunsenLabs Repository Signing Key) <dev@2ion.de>
sub   rsa4096 2015-07-11 [E] [går ut: 2030-10-08]

/etc/apt/trusted.gpg.d/bunsen.key.chroot.asc
--------------------------------------------
pub   rsa4096 2015-07-11 [SC] [går ut: 2030-10-08]
      3172 4784 0522 7490 BBB7  43E6 A067 3F72 FE62 D9C5
uid           [    okänt    ] Jens John (BunsenLabs Repository Signing Key) <dev@2ion.de>
sub   rsa4096 2015-07-11 [E] [går ut: 2030-10-08]

/etc/apt/trusted.gpg.d/bunsen-keyring.gpg
-----------------------------------------
pub   rsa4096 2015-07-11 [SC] [går ut: 2030-10-08]
      3172 4784 0522 7490 BBB7  43E6 A067 3F72 FE62 D9C5
uid           [    okänt    ] Jens John (BunsenLabs Repository Signing Key) <dev@2ion.de>
sub   rsa4096 2015-07-11 [E] [går ut: 2030-10-08]

The sid VM is created 2018-05-22, with netinstall skript.

as well as the full entry in sources.list.

Repos:     Active apt repos in: /etc/apt/sources.list 
           1: deb http://server.local/ftp.acc.umu.se/debian/ sid main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/bunsen.list 
           1: deb http://192.168.1.254/kelaino.bunsenlabs.org/~johnraff/debian beryllium main
           2: deb https://pkg.bunsenlabs.org/debian beryllium main

No difference if I update aginst server.local/eu.pkg.bunsenlabs.org or just pkg.bunsenlabs.org.

That is, after installing "podman", the following should produce no error but show a BL logo at the end:

It is moving forward very slowly. Now after 10 min, it has copied (blob) 2.5 MiB of 52.4.
Will check it in the morning.
Edit 1. The skript timed out on  8.9MiB, with

Error: Error writing blob: error storing blob to file "/var/tmp/storage097339466/1": error happened during read: unexpected EOF

I replaced single quote (') with double quote. Had an empty line after last quote... I edit and try again...

It should be said that the "official" Beryllium repo is empty except for 3 packages and not yet populated or QAed.

Well, populated it is, but not yet fully... I added it to one laptop and one desktop and got the Beryllium keyring...

Well, it is no bug. No generell failure on server. Can any mod move it to the help forum?
Apologizes for the extra work.

I would be nice to fix the apt-key error on the sid-client instead of reinstall...

Edit 2: More errors...

root@V-Buns-Sid-amd:~/bin# bash podman.sh
Resolved "debian" as an alias (/etc/containers/registries.conf.d/shortnames.conf)
Trying to pull docker.io/library/debian:bullseye...
Getting image source signatures
Copying blob 4c25b3090c26 done  
Copying config fe3c5de034 done  
Writing manifest to image destination
Storing signatures
E: Unable to locate package wget
E: Package 'gnupg2' has no installation candidate
E: Unable to locate package neofetch
E: Package 'ca-certificates' has no installation candidate
/bin/bash: line 5: wget: command not found
dpkg: error: cannot access archive '/tmp/keyring.deb': No such file or directory
E: gnupg, gnupg2 and gnupg1 do not seem to be installed, but one of them is required for this operation
W: Failed to fetch http://deb.debian.org/debian/dists/bullseye/InRelease  Temporary failure resolving 'deb.debian.org'
W: Failed to fetch http://security.debian.org/debian-security/dists/bullseye-security/InRelease  Temporary failure resolving 'security.debian.org'
W: Failed to fetch http://deb.debian.org/debian/dists/bullseye-updates/InRelease  Temporary failure resolving 'deb.debian.org'
W: Failed to fetch https://eu.pkg.bunsenlabs.org/debian/dists/beryllium/InRelease  Temporary failure resolving 'eu.pkg.bunsenlabs.org'
W: Some index files failed to download. They have been ignored, or old ones used instead.
E: Unable to locate package bunsen-os-release
/bin/bash: line 11: neofetch: command not found

Edit 3: Installed neofetch and run the script again. Got error:

debconf: delaying package configuration, since apt-utils is not installed

But apt-utils installed (as is wget and gnupg).The script listed apt-keys and run neofetch, but no more info about the beryllium repo on pkg.bunsenlabs.

Last edited by rbh (2021-08-28 23:49:09)


// Regards rbh

Please read before requesting help: Guide to getting help,
Introduction to the Bunsenlabs Lithium Desktop and other help topics under "Help Resources" on the BunsenLabs menu

Offline

#4 2021-08-28 23:57:47

rbh
Moderator
From: Sweden/Vasterbotten/Rusfors
Registered: 2016-08-11
Posts: 1,182

Re: apt key for eu.pkg.bunsenlabs.org/debian beryllium

Might be I need to run a container for sid?


// Regards rbh

Please read before requesting help: Guide to getting help,
Introduction to the Bunsenlabs Lithium Desktop and other help topics under "Help Resources" on the BunsenLabs menu

Offline

#5 2021-08-29 18:07:10

rbh
Moderator
From: Sweden/Vasterbotten/Rusfors
Registered: 2016-08-11
Posts: 1,182

Re: apt key for eu.pkg.bunsenlabs.org/debian beryllium

Installed a new VM, with updated Lithium iso.
After upgrading some packages, I added beryllium source, both from pkg.bunsenlabs and kelaino.

Update gave error for beryllium Inrelease on keliano. Said open key for 8FFD2CE993071671 was not available and that keliano beryllium was not signed...
Commenting out keliano made error disapear.
Did an upgrade but it hang on upgrading papirus-icon-theme...

Made a new bullseye "cli-install". Added keliano beryllium, copied bunsen-dev.asc to /etc/apt/trusted.gpg.d. Apt update went ok.

Now installing bunsen-meta-all. Will try add beryllium repo on pkg.bunsenlabs later.


// Regards rbh

Please read before requesting help: Guide to getting help,
Introduction to the Bunsenlabs Lithium Desktop and other help topics under "Help Resources" on the BunsenLabs menu

Offline

#6 2021-08-29 21:28:24

rbh
Moderator
From: Sweden/Vasterbotten/Rusfors
Registered: 2016-08-11
Posts: 1,182

Re: apt key for eu.pkg.bunsenlabs.org/debian beryllium

Hanging on "Unpacking papirus-icon-theme (20210201-1), "for ever" (more than 30 min).
When finaly ready, it was ok to add beryllium repo for pkg.bunsenlabs.

So, it is something with that sid box's keys, I want to fix, but server works ok.


// Regards rbh

Please read before requesting help: Guide to getting help,
Introduction to the Bunsenlabs Lithium Desktop and other help topics under "Help Resources" on the BunsenLabs menu

Offline

Board footer

Powered by FluxBB