You are not logged in.

#1 2021-05-21 21:23:38

The Byte Size Brawler
New Member
From: Lurking In The Record Store
Registered: 2021-05-16
Posts: 3

No Irq Handler For Vector Error

Hi guys, I wonder if any of you more knowledgeable folk can help me with an error I get during boot up.

My laptop specs are the following:

Compaq Presario CQ57
AMD E-450 1.65 GHz Dual Core Processor With Integrated ATI Mobility Radeon HD 6320M
8GB Crucial DDR3 PC3-12800 SODIMM Ram (2x 4GB Sticks)
Kingston KC600 256GB SSD

After hitting the enter on the grub screen to launch lithium its loads the following on the bunsenlabs background screen

Loading Linux 4.19.0-13-amd64 . . .
Loading initial ramdisk . . .

then the screen goes blank and I get the following errors appear

[        0.006771] do_IRQ: 1.55 No irq handler for vector
/dev/sda1: clean, 155943/15630336 files, 2116679/62514432 blocks
[        10.515783] kvm: disabled by bios
[        10.554195] kvm: disabled by bios

I've managed to fix the kvm error by enabling virtualization technology in the bios settings but I'm drawing a total blank at fixing the No irq handler for vector error. I've attached the dmegs log for you to have a look at

[    0.000000] Linux version 4.19.0-13-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.160-2 (2020-11-28)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-13-amd64 root=UUID=1b194448-c485-4ff5-8ef2-61ce7fbc5280 ro quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfb3efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfb3f000-0x00000000dfbbefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfebefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dfebf000-0x00000000dfef4fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfef5000-0x00000000dfefffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dff00000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000206ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000207000000-0x000000021effffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard Presario CQ57 Notebook PC/3577, BIOS F.42 11/07/2011
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1646.553 MHz processor
[    0.008676] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.008680] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.008694] last_pfn = 0x207000 max_arch_pfn = 0x400000000
[    0.008703] MTRR default type: uncachable
[    0.008705] MTRR fixed ranges enabled:
[    0.008708]   00000-9FFFF write-back
[    0.008710]   A0000-BFFFF uncachable
[    0.008712]   C0000-FFFFF write-through
[    0.008714] MTRR variable ranges enabled:
[    0.008717]   0 base 000000000 mask F80000000 write-back
[    0.008720]   1 base 080000000 mask FC0000000 write-back
[    0.008722]   2 base 0C0000000 mask FE0000000 write-back
[    0.008725]   3 base 0DFEBD000 mask FFFFFF000 uncachable
[    0.008727]   4 base 0FFE00000 mask FFFE00000 write-protect
[    0.008728]   5 disabled
[    0.008730]   6 disabled
[    0.008731]   7 disabled
[    0.008733] TOM2: 000000021f000000 aka 8688M
[    0.008928] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009015] last_pfn = 0xdff00 max_arch_pfn = 0x400000000
[    0.017560] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
[    0.019393] Using GB pages for direct mapping
[    0.020209] RAMDISK: [mem 0x32f31000-0x3578ffff]
[    0.020229] ACPI: Early table checksum verification disabled
[    0.020697] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.020705] ACPI: XSDT 0x00000000DFEF4120 000074 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.020717] ACPI: FACP 0x00000000DFEF3000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[    0.020729] ACPI: DSDT 0x00000000DFEDE000 010022 (v01 HP     INSYDE   F0000000 ACPI 00040000)
[    0.020736] ACPI: FACS 0x00000000DFC96000 000040
[    0.020741] ACPI: FACS 0x00000000DFC96000 000040
[    0.020746] ACPI: HPET 0x00000000DFEF2000 000038 (v01 HP     INSYDE   00000001 ACPI 00040000)
[    0.020752] ACPI: APIC 0x00000000DFEF1000 000084 (v02 HP     INSYDE   00000001 ACPI 00040000)
[    0.020758] ACPI: MCFG 0x00000000DFEF0000 00003C (v01 HP     INSYDE   00000001 ACPI 00040000)
[    0.020764] ACPI: ASF! 0x00000000DFEEF000 0000A5 (v32 HP     INSYDE   00000001 ACPI 00040000)
[    0.020770] ACPI: BOOT 0x00000000DFEDD000 000028 (v01 HP     INSYDE   00000001 ACPI 00040000)
[    0.020776] ACPI: SLIC 0x00000000DFEDC000 000176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[    0.020782] ACPI: MSDM 0x00000000DFEDB000 000055 (v03 HP     INSYDE   00000001 ACPI 00040000)
[    0.020787] ACPI: SSDT 0x00000000DFEDA000 0003DE (v01 HP     INSYDE   00000001 AMD  00000001)
[    0.020793] ACPI: SSDT 0x00000000DFED8000 00168E (v02 HP     INSYDE   00000001 MSFT 04000000)
[    0.020812] ACPI: Local APIC address 0xfee00000
[    0.021074] No NUMA configuration found
[    0.021077] Faking a node at [mem 0x0000000000000000-0x0000000206ffffff]
[    0.021087] NODE_DATA(0) allocated [mem 0x206ff9000-0x206ffdfff]
[    0.021172] Zone ranges:
[    0.021174]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.021178]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.021180]   Normal   [mem 0x0000000100000000-0x0000000206ffffff]
[    0.021182]   Device   empty
[    0.021184] Movable zone start for each node
[    0.021186] Early memory node ranges
[    0.021188]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.021189]   node   0: [mem 0x0000000000100000-0x00000000dfb3efff]
[    0.021191]   node   0: [mem 0x00000000dfef5000-0x00000000dfefffff]
[    0.021193]   node   0: [mem 0x0000000100000000-0x0000000206ffffff]
[    0.021462] Zeroed struct page in unavailable ranges: 5400 pages
[    0.021465] Initmem setup node 0 [mem 0x0000000000001000-0x0000000206ffffff]
[    0.021469] On node 0 totalpages: 1993448
[    0.021472]   DMA zone: 64 pages used for memmap
[    0.021474]   DMA zone: 21 pages reserved
[    0.021476]   DMA zone: 3998 pages, LIFO batch:0
[    0.021752]   DMA32 zone: 14254 pages used for memmap
[    0.021754]   DMA32 zone: 912202 pages, LIFO batch:63
[    0.083261]   Normal zone: 16832 pages used for memmap
[    0.083264]   Normal zone: 1077248 pages, LIFO batch:63
[    0.154955] ACPI: PM-Timer IO Port: 0x408
[    0.154960] ACPI: Local APIC address 0xfee00000
[    0.154972] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.154974] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.154976] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.154978] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.155031] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.155036] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.155040] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.155043] ACPI: IRQ0 used by override.
[    0.155045] ACPI: IRQ9 used by override.
[    0.155048] Using ACPI (MADT) for SMP configuration information
[    0.155052] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.155064] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.155106] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.155111] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.155113] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.155115] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.155119] PM: Registered nosave memory: [mem 0xdfb3f000-0xdfbbefff]
[    0.155121] PM: Registered nosave memory: [mem 0xdfbbf000-0xdfebefff]
[    0.155122] PM: Registered nosave memory: [mem 0xdfebf000-0xdfef4fff]
[    0.155126] PM: Registered nosave memory: [mem 0xdff00000-0xdfffffff]
[    0.155128] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.155129] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.155131] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.155132] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.155134] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.155135] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.155137] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
[    0.155138] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.155139] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.155141] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.155145] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.155147] Booting paravirtualized kernel on bare hardware
[    0.155153] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.420465] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0
[    0.420485] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.421813] percpu: Embedded 45 pages/cpu s144536 r8192 d31592 u524288
[    0.421831] pcpu-alloc: s144536 r8192 d31592 u524288 alloc=1*2097152
[    0.421834] pcpu-alloc: [0] 0 1 2 3 
[    0.421887] Built 1 zonelists, mobility grouping on.  Total pages: 1962277
[    0.421890] Policy zone: Normal
[    0.421893] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-13-amd64 root=UUID=1b194448-c485-4ff5-8ef2-61ce7fbc5280 ro quiet
[    0.454028] Calgary: detecting Calgary via BIOS EBDA area
[    0.454033] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.545914] Memory: 7715976K/7973792K available (10252K kernel code, 1242K rwdata, 3320K rodata, 1596K init, 2264K bss, 257816K reserved, 0K cma-reserved)
[    0.546243] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.546263] ftrace: allocating 31960 entries in 125 pages
[    0.569737] rcu: Hierarchical RCU implementation.
[    0.569743] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.569746] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.577597] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.578215] spurious 8259A interrupt: IRQ7.
[    0.580344] Console: colour VGA+ 80x25
[    0.580355] console [tty0] enabled
[    0.580421] ACPI: Core revision 20180810
[    0.580873] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.580895] hpet clockevent registered
[    0.580906] APIC: Switch to symmetric I/O mode setup
[    0.581548] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.600942] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17bbede316e, max_idle_ns: 440795251171 ns
[    0.600975] Calibrating delay loop (skipped), value calculated using timer frequency.. 3293.10 BogoMIPS (lpj=6586212)
[    0.600981] pid_max: default: 32768 minimum: 301
[    0.601072] Security Framework initialized
[    0.601076] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.601119] AppArmor: AppArmor initialized
[    0.605715] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.608032] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.608158] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.608236] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.608796] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.608801] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.608804] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.608808] Spectre V2 : Mitigation: Full AMD retpoline
[    0.608810] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.608811] Speculative Store Bypass: Vulnerable
[    0.622509] Freeing SMP alternatives memory: 24K
[    0.736152] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0)
[    0.736548] Performance Events: AMD PMU driver.
[    0.736558] ... version:                0
[    0.736560] ... bit width:              48
[    0.736561] ... generic registers:      4
[    0.736563] ... value mask:             0000ffffffffffff
[    0.736564] ... max period:             00007fffffffffff
[    0.736565] ... fixed-purpose events:   0
[    0.736566] ... event mask:             000000000000000f
[    0.736692] rcu: Hierarchical SRCU implementation.
[    0.736947] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.736947] smp: Bringing up secondary CPUs ...
[    0.736947] x86: Booting SMP configuration:
[    0.736947] .... node  #0, CPUs:      #1
[    0.006778] do_IRQ: 1.55 No irq handler for vector
[    0.743195] smp: Brought up 1 node, 2 CPUs
[    0.743195] smpboot: Max logical packages: 2
[    0.743195] smpboot: Total of 2 processors activated (6586.21 BogoMIPS)
[    0.743195] devtmpfs: initialized
[    0.743195] x86/mm: Memory block size: 128MB
[    0.745100] PM: Registering ACPI NVS region [mem 0xdfbbf000-0xdfebefff] (3145728 bytes)
[    0.745302] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.745322] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.745509] pinctrl core: initialized pinctrl subsystem
[    0.748235] NET: Registered protocol family 16
[    0.748434] audit: initializing netlink subsys (disabled)
[    0.749065] audit: type=2000 audit(1621630030.168:1): state=initialized audit_enabled=0 res=1
[    0.749369] cpuidle: using governor ladder
[    0.749382] cpuidle: using governor menu
[    0.749471] Simple Boot Flag at 0x44 set to 0x1
[    0.749471] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.749471] ACPI: bus type PCI registered
[    0.749471] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.749471] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.749471] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.749471] PCI: Using configuration type 1 for base access
[    0.749471] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.749471] mtrr: probably your BIOS does not setup all CPUs.
[    0.749471] mtrr: corrected configuration.
[    0.754654] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.754654] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.754654] ACPI: Added _OSI(Module Device)
[    0.754654] ACPI: Added _OSI(Processor Device)
[    0.754654] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.754654] ACPI: Added _OSI(Processor Aggregator Device)
[    0.754654] ACPI: Added _OSI(Linux-Dell-Video)
[    0.754654] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.774563] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.777432] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.778358] ACPI: EC: EC started
[    0.778360] ACPI: EC: interrupt blocked
[    0.804897] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
[    0.804902] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.804906] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
[    0.804907] ACPI: Interpreter enabled
[    0.804967] ACPI: (supports S0 S3 S4 S5)
[    0.804971] ACPI: Using IOAPIC for interrupt routing
[    0.805389] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.805892] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.819028] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.819042] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.819527] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.819970] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.819974] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.820000] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.820185] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce5ff])
[    0.820714] PCI host bridge to bus 0000:00
[    0.820720] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.820723] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.820726] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.820730] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.820733] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.820736] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.820739] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.820742] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.820744] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.820747] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.820750] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.820753] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.820756] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.820759] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.820762] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.820765] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[    0.820768] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[    0.820772] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.820793] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.821044] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
[    0.821067] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.821076] pci 0000:00:01.0: reg 0x14: [io  0x4000-0x40ff]
[    0.821086] pci 0000:00:01.0: reg 0x18: [mem 0xf0400000-0xf043ffff]
[    0.821118] pci 0000:00:01.0: enabling Extended Tags
[    0.821166] pci 0000:00:01.0: supports D1 D2
[    0.821444] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.821475] pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
[    0.821487] pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
[    0.821500] pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
[    0.821513] pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
[    0.821526] pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
[    0.821539] pci 0000:00:11.0: reg 0x24: [mem 0xf0449000-0xf04493ff]
[    0.821840] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.821866] pci 0000:00:12.0: reg 0x10: [mem 0xf0448000-0xf0448fff]
[    0.822125] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.823272] pci 0000:00:12.2: reg 0x10: [mem 0xf0447000-0xf04470ff]
[    0.826374] pci 0000:00:12.2: supports D1 D2
[    0.826378] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.826642] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.826930] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.826965] pci 0000:00:14.2: reg 0x10: [mem 0xf0440000-0xf0443fff 64bit]
[    0.827058] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.827289] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.827627] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.827905] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.827931] pci 0000:00:14.5: reg 0x10: [mem 0xf0446000-0xf0446fff]
[    0.828264] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.828330] pci 0000:00:15.0: enabling Extended Tags
[    0.828403] pci 0000:00:15.0: supports D1 D2
[    0.828681] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.829020] pci 0000:00:15.1: enabling Extended Tags
[    0.829092] pci 0000:00:15.1: supports D1 D2
[    0.829367] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[    0.829432] pci 0000:00:15.3: enabling Extended Tags
[    0.829502] pci 0000:00:15.3: supports D1 D2
[    0.829708] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.829735] pci 0000:00:16.0: reg 0x10: [mem 0xf0445000-0xf0445fff]
[    0.829992] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.831103] pci 0000:00:16.2: reg 0x10: [mem 0xf0444000-0xf04440ff]
[    0.834370] pci 0000:00:16.2: supports D1 D2
[    0.834373] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.834573] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.834774] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.834966] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.835161] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.835372] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.835565] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.835757] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.835951] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.836170] pci_bus 0000:01: extended config space not accessible
[    0.836314] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.836329] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.836332] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.836336] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.836339] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.836342] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.836345] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.836348] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.836350] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.836353] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.836356] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.836359] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.836362] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.836365] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.836368] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.836371] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[    0.836373] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xfed3ffff window] (subtractive decode)
[    0.836377] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
[    0.836586] pci 0000:02:00.0: [10ec:5209] type 00 class 0xff0000
[    0.836628] pci 0000:02:00.0: reg 0x10: [mem 0xf0300000-0xf0300fff]
[    0.836820] pci 0000:02:00.0: supports D1 D2
[    0.836823] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[    0.849086] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[    0.849099] pci 0000:00:15.0:   bridge window [io  0x3000-0x3fff]
[    0.849106] pci 0000:00:15.0:   bridge window [mem 0xf0300000-0xf03fffff]
[    0.849114] pci 0000:00:15.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.849368] pci 0000:06:00.0: [10ec:8136] type 00 class 0x020000
[    0.849412] pci 0000:06:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.849451] pci 0000:06:00.0: reg 0x18: [mem 0xf0104000-0xf0104fff 64bit pref]
[    0.849476] pci 0000:06:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
[    0.849626] pci 0000:06:00.0: supports D1 D2
[    0.849630] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.861084] pci 0000:00:15.1: PCI bridge to [bus 06]
[    0.861097] pci 0000:00:15.1:   bridge window [io  0x2000-0x2fff]
[    0.861109] pci 0000:00:15.1:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[    0.861392] pci 0000:07:00.0: [1814:5390] type 00 class 0x028000
[    0.861451] pci 0000:07:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff]
[    0.873084] pci 0000:00:15.3: PCI bridge to [bus 07]
[    0.873102] pci 0000:00:15.3:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.906777] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.906932] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.907171] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.907407] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.907619] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.907830] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.908040] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.908213] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.909005] ACPI: EC: interrupt unblocked
[    0.909020] ACPI: EC: event unblocked
[    0.909031] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.909035] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.909226] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.909226] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.909226] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.909226] vgaarb: loaded
[    0.909226] pps_core: LinuxPPS API ver. 1 registered
[    0.909226] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.909228] PTP clock support registered
[    0.909245] EDAC MC: Ver: 3.0.0
[    0.909610] resource sanity check: requesting [mem 0x000e3ff0-0x000e46d9], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[    0.909610] caller memremap+0xda/0x180 mapping multiple BARs
[    0.909610] PCI: Using ACPI for IRQ routing
[    0.913139] PCI: pci_cache_line_size set to 64 bytes
[    0.913281] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.913284] e820: reserve RAM buffer [mem 0xdfb3f000-0xdfffffff]
[    0.913287] e820: reserve RAM buffer [mem 0xdff00000-0xdfffffff]
[    0.913289] e820: reserve RAM buffer [mem 0x207000000-0x207ffffff]
[    0.913589] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.913589] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.913589] amd_nb: x86/cpu/AMD: CPU erratum 688 worked around
[    0.913589] clocksource: Switched to clocksource tsc-early
[    0.941679] VFS: Disk quotas dquot_6.6.0
[    0.941724] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.942066] AppArmor: AppArmor Filesystem Enabled
[    0.942118] pnp: PnP ACPI init
[    0.942489] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.942494] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.942509] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.942937] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.943068] system 00:02: [io  0x0400-0x04cf] has been reserved
[    0.943073] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.943077] system 00:02: [io  0x04d6] has been reserved
[    0.943080] system 00:02: [io  0x0680-0x06ff] has been reserved
[    0.943084] system 00:02: [io  0x077a] has been reserved
[    0.943087] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.943091] system 00:02: [io  0x0c14] has been reserved
[    0.943095] system 00:02: [io  0x0c50-0x0c52] has been reserved
[    0.943098] system 00:02: [io  0x0c6c] has been reserved
[    0.943102] system 00:02: [io  0x0c6f] has been reserved
[    0.943105] system 00:02: [io  0x0cd0-0x0cdb] has been reserved
[    0.943117] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.943302] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.943308] system 00:03: [mem 0xffffffb0-0xfffffffe] has been reserved
[    0.943311] system 00:03: [mem 0xffffff00-0xfffffffe] could not be reserved
[    0.943315] system 00:03: [mem 0xffe00000-0xffffffff] could not be reserved
[    0.943327] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.977443] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.977514] pnp 00:05: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active)
[    0.978591] pnp: PnP ACPI: found 6 devices
[    0.990261] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.990304] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.990326] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[    0.990332] pci 0000:00:15.0:   bridge window [io  0x3000-0x3fff]
[    0.990340] pci 0000:00:15.0:   bridge window [mem 0xf0300000-0xf03fffff]
[    0.990346] pci 0000:00:15.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.990355] pci 0000:00:15.1: PCI bridge to [bus 06]
[    0.990360] pci 0000:00:15.1:   bridge window [io  0x2000-0x2fff]
[    0.990370] pci 0000:00:15.1:   bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[    0.990379] pci 0000:00:15.3: PCI bridge to [bus 07]
[    0.990386] pci 0000:00:15.3:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.990402] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.990405] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.990409] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.990412] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.990415] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.990418] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.990422] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.990425] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.990428] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.990431] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.990434] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.990437] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.990440] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.990444] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.990447] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
[    0.990450] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
[    0.990453] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window]
[    0.990457] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.990460] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.990463] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.990466] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.990469] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.990472] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.990475] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.990478] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.990481] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.990484] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.990487] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.990490] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.990493] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.990497] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff window]
[    0.990500] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff window]
[    0.990503] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff window]
[    0.990506] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff window]
[    0.990509] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.990512] pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf03fffff]
[    0.990515] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.990519] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.990522] pci_bus 0000:06: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[    0.990525] pci_bus 0000:07: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.990768] NET: Registered protocol family 2
[    0.991430] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.991516] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.991861] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.992394] TCP: Hash tables configured (established 65536 bind 65536)
[    0.992560] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.992644] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.992886] NET: Registered protocol family 1
[    0.992902] NET: Registered protocol family 44
[    0.992928] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.070210] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c1 took 75417 usecs
[    1.090221] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x6c1 took 19443 usecs
[    1.170207] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c1 took 77995 usecs
[    1.250246] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c1 took 78051 usecs
[    1.270266] pci 0000:00:16.2: quirk_usb_early_handoff+0x0/0x6c1 took 19452 usecs
[    1.270407] PCI: CLS 64 bytes, default 64
[    1.270541] Unpacking initramfs...
[    2.683443] Freeing initrd memory: 41340K
[    2.683555] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.683564] software IO TLB: mapped [mem 0xdbb3f000-0xdfb3f000] (64MB)
[    2.683613] LVT offset 0 assigned for vector 0x400
[    2.683899] perf: AMD IBS detected (0x000000ff)
[    2.685708] Initialise system trusted keyrings
[    2.685731] Key type blacklist registered
[    2.686040] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    2.689714] zbud: loaded
[    3.204458] Key type asymmetric registered
[    3.204463] Asymmetric key parser 'x509' registered
[    3.204501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    3.204596] io scheduler noop registered
[    3.204598] io scheduler deadline registered
[    3.204713] io scheduler cfq registered (default)
[    3.204716] io scheduler mq-deadline registered
[    3.205801] pcieport 0000:00:15.0: Signaling PME with IRQ 24
[    3.206166] pcieport 0000:00:15.1: Signaling PME with IRQ 25
[    3.206560] pcieport 0000:00:15.3: Signaling PME with IRQ 26
[    3.206749] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.207632] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.209637] Linux agpgart interface v0.103
[    3.210269] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    3.210272] AMD IOMMUv2 functionality not available on this system
[    3.211015] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.221118] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.221137] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.222006] mousedev: PS/2 mouse device common for all mice
[    3.222235] rtc_cmos 00:01: RTC can wake from S4
[    3.222670] rtc_cmos 00:01: registered as rtc0
[    3.222753] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    3.223046] ledtrig-cpu: registered to indicate activity on CPUs
[    3.223104] resource sanity check: requesting [mem 0x000e3ff0-0x000e46d9], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
[    3.223113] caller memremap+0xda/0x180 mapping multiple BARs
[    3.224186] NET: Registered protocol family 10
[    3.227896] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.250183] Segment Routing with IPv6
[    3.250233] mip6: Mobile IPv6
[    3.250238] NET: Registered protocol family 17
[    3.250601] mpls_gso: MPLS GSO support
[    3.251064] mce: Using 6 MCE banks
[    3.251094] microcode: microcode updated early to new patch_level=0x05000119
[    3.251159] microcode: CPU0: patch_level=0x05000119
[    3.251181] microcode: CPU1: patch_level=0x05000119
[    3.251377] microcode: Microcode Update Driver: v2.2.
[    3.251402] sched_clock: Marking stable (3248583664, 2778097)->(3257753033, -6391272)
[    3.252019] registered taskstats version 1
[    3.252023] Loading compiled-in X.509 certificates
[    3.369874] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    3.369929] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[    3.370002] zswap: loaded using pool lzo/zbud
[    3.370310] AppArmor: AppArmor sha1 policy hashing enabled
[    3.371210] rtc_cmos 00:01: setting system clock to 2021-05-21 20:47:13 UTC (1621630033)
[    4.265227] Freeing unused kernel image memory: 1596K
[    4.265354] tsc: Refined TSC clocksource calibration: 1646.493 MHz
[    4.265367] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17bbb53a738, max_idle_ns: 440795234529 ns
[    4.265409] clocksource: Switched to clocksource tsc
[    4.281328] Write protecting the kernel read-only data: 16384k
[    4.285713] Freeing unused kernel image memory: 2028K
[    4.286332] Freeing unused kernel image memory: 776K
[    4.310658] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.310664] Run /init as init process
[    4.876694] SCSI subsystem initialized
[    4.886457] thermal LNXTHERM:00: registered as thermal_zone0
[    4.886463] ACPI: Thermal Zone [TSZ0] (52 C)
[    4.890524] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.890537] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    4.891100] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    4.986567] ACPI: bus type USB registered
[    4.986631] usbcore: registered new interface driver usbfs
[    4.986662] usbcore: registered new interface driver hub
[    4.991490] usbcore: registered new device driver usb
[    4.999985] libata version 3.00 loaded.
[    5.014635] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.029593] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.031513] ehci-pci: EHCI PCI platform driver
[    5.031928] QUIRK: Enable AMD PLL fix
[    5.032018] ehci-pci 0000:00:12.2: EHCI Host Controller
[    5.032033] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    5.032045] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.032098] ehci-pci 0000:00:12.2: debug port 1
[    5.032187] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0447000
[    5.037988] ahci 0000:00:11.0: version 3.0
[    5.038525] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    5.038530] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    5.045117] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    5.045283] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    5.045288] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.045291] usb usb1: Product: EHCI Host Controller
[    5.045294] usb usb1: Manufacturer: Linux 4.19.0-13-amd64 ehci_hcd
[    5.045296] usb usb1: SerialNumber: 0000:00:12.2
[    5.045611] hub 1-0:1.0: USB hub found
[    5.045633] hub 1-0:1.0: 5 ports detected
[    5.046554] ehci-pci 0000:00:16.2: EHCI Host Controller
[    5.046570] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 2
[    5.046580] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.046632] ehci-pci 0000:00:16.2: debug port 1
[    5.046689] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0444000
[    5.058357] scsi host0: ahci
[    5.061105] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    5.061295] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    5.061300] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.061303] usb usb2: Product: EHCI Host Controller
[    5.061305] usb usb2: Manufacturer: Linux 4.19.0-13-amd64 ehci_hcd
[    5.061308] usb usb2: SerialNumber: 0000:00:16.2
[    5.061653] hub 2-0:1.0: USB hub found
[    5.061679] hub 2-0:1.0: 4 ports detected
[    5.063056] libphy: r8169: probed
[    5.063599] r8169 0000:06:00.0 eth0: RTL8105e, ec:9a:74:f7:03:df, XID 40a00000, IRQ 28
[    5.070165] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.072618] ohci-pci: OHCI PCI platform driver
[    5.073140] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    5.073157] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    5.073257] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0448000
[    5.077751] scsi host1: ahci
[    5.078101] ata1: SATA max UDMA/133 abar m1024@0xf0449000 port 0xf0449100 irq 19
[    5.078106] ata2: SATA max UDMA/133 abar m1024@0xf0449000 port 0xf0449180 irq 19
[    5.112646] r8169 0000:06:00.0 eno1: renamed from eth0
[    5.137875] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    5.137882] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.137885] usb usb3: Product: OHCI PCI host controller
[    5.137887] usb usb3: Manufacturer: Linux 4.19.0-13-amd64 ohci_hcd
[    5.137890] usb usb3: SerialNumber: 0000:00:12.0
[    5.138500] hub 3-0:1.0: USB hub found
[    5.138565] hub 3-0:1.0: 5 ports detected
[    5.139463] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    5.139478] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 4
[    5.139550] ohci-pci 0000:00:14.5: irq 18, io mem 0xf0446000
[    5.201320] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    5.201326] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.201329] usb usb4: Product: OHCI PCI host controller
[    5.201331] usb usb4: Manufacturer: Linux 4.19.0-13-amd64 ohci_hcd
[    5.201334] usb usb4: SerialNumber: 0000:00:14.5
[    5.202069] hub 4-0:1.0: USB hub found
[    5.202137] hub 4-0:1.0: 2 ports detected
[    5.202914] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    5.202928] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 5
[    5.202990] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0445000
[    5.265389] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    5.265394] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.265398] usb usb5: Product: OHCI PCI host controller
[    5.265400] usb usb5: Manufacturer: Linux 4.19.0-13-amd64 ohci_hcd
[    5.265403] usb usb5: SerialNumber: 0000:00:16.0
[    5.266127] hub 5-0:1.0: USB hub found
[    5.266192] hub 5-0:1.0: 4 ports detected
[    5.381236] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    5.397071] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    5.538424] usb 1-1: New USB device found, idVendor=0781, idProduct=556b, bcdDevice= 1.27
[    5.538435] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.538440] usb 1-1: Product: Cruzer Edge
[    5.538445] usb 1-1: Manufacturer: SanDisk
[    5.538450] usb 1-1: SerialNumber: 4C530699960310105345
[    5.551175] usb-storage 1-1:1.0: USB Mass Storage device detected
[    5.552249] scsi host2: usb-storage 1-1:1.0
[    5.552537] usbcore: registered new interface driver usb-storage
[    5.553827] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.554550] ata1.00: supports DRM functions and may not be fully accessible
[    5.554687] ata1.00: ATA-10: KINGSTON SKC600256G, S4200102, max UDMA/133
[    5.554693] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    5.555600] ata1.00: supports DRM functions and may not be fully accessible
[    5.556291] ata1.00: configured for UDMA/133
[    5.556799] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SKC6002 0102 PQ: 0 ANSI: 5
[    5.557322] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.559816] usbcore: registered new interface driver uas
[    5.572304] ata2.00: ATAPI: hp      DVD-RAM UJ8B1, H.03, max UDMA/100
[    5.596129] ata2.00: configured for UDMA/100
[    5.613870] scsi 1:0:0:0: CD-ROM            hp       DVD-RAM UJ8B1    H.03 PQ: 0 ANSI: 5
[    5.663307] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    5.663314] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.663339] sd 0:0:0:0: [sda] Write Protect is off
[    5.663344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.663380] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.665220]  sda: sda1
[    5.666410] sd 0:0:0:0: [sda] supports TCG Opal
[    5.666415] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.672105] usb 2-2: New USB device found, idVendor=058f, idProduct=a001, bcdDevice= 0.14
[    5.672112] usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    5.672115] usb 2-2: Product: HP Webcam-101
[    5.672117] usb 2-2: Manufacturer: FC9B8VPXR
[    5.696340] random: fast init done
[    5.704934] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.704941] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.705589] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.998739] psmouse serio1: synaptics: queried max coordinates: x [..5634], y [..4598]
[    6.091579] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 706145
[    6.151414] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    6.212994] raid6: sse2x1   gen()  1137 MB/s
[    6.280970] raid6: sse2x1   xor()  1181 MB/s
[    6.348974] raid6: sse2x2   gen()  1565 MB/s
[    6.416974] raid6: sse2x2   xor()  1187 MB/s
[    6.484984] raid6: sse2x4   gen()  2077 MB/s
[    6.552973] raid6: sse2x4   xor()  1297 MB/s
[    6.552975] raid6: using algorithm sse2x4 gen() 2077 MB/s
[    6.552977] raid6: .... xor() 1297 MB/s, rmw enabled
[    6.552979] raid6: using ssse3x2 recovery algorithm
[    6.570063] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.27 PQ: 0 ANSI: 6
[    6.572046] sd 2:0:0:0: [sdb] 30529536 512-byte logical blocks: (15.6 GB/14.6 GiB)
[    6.573044] sd 2:0:0:0: [sdb] Write Protect is off
[    6.573050] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    6.574046] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.575561] xor: measuring software checksum speed
[    6.579684]  sdb: sdb1 sdb2
[    6.583912] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    6.612959]    prefetch64-sse:  3248.000 MB/sec
[    6.652958]    generic_sse:  3068.000 MB/sec
[    6.652960] xor: using function: prefetch64-sse (3248.000 MB/sec)
[    6.829928] Btrfs loaded, crc32c=crc32c-generic
[    7.193598] cryptd: max_cpu_qlen set to 1000
[    7.414951] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.701064] systemd[1]: Inserted module 'autofs4'
[    7.744708] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    7.765519] systemd[1]: Detected architecture x86-64.
[    7.769964] systemd[1]: Set hostname to <Bunsenlabs>.
[    7.927685] random: lvmconfig: uninitialized urandom read (4 bytes read)
[    8.131460] random: systemd: uninitialized urandom read (16 bytes read)
[    8.137551] random: systemd: uninitialized urandom read (16 bytes read)
[    8.137599] systemd[1]: Reached target Swap.
[    8.138168] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.138582] systemd[1]: Listening on Journal Socket.
[    8.142968] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.145894] systemd[1]: Mounting Kernel Debug File System...
[    8.146084] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    8.146266] systemd[1]: Reached target Remote File Systems.
[    8.247708] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.837520] systemd-journald[195]: Received request to flush runtime journal from PID 1
[    8.896302] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    8.896327] ACPI: Lid Switch [LID]
[    8.896487] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    8.896506] ACPI: Power Button [PWRB]
[    8.896625] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    8.896663] ACPI: Power Button [PWRF]
[    8.922354] ACPI: AC Adapter [AC] (on-line)
[    8.922773] acpi_cpufreq: overriding BIOS provided _PSD data
[    8.931604] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.970216] acpi device:00: registered as cooling_device2
[    8.970363] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    9.097241] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    9.097704] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    9.097955] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    9.098225] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[    9.125738] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    9.165477] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.171102] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    9.171347] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    9.323063] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    9.582736] media: Linux media interface: v0.10
[    9.756889] videodev: Linux video capture interface: v2.00
[    9.989129] uvcvideo: Found UVC 1.00 device HP Webcam-101 (058f:a001)
[   10.015947] input: HP Webcam-101: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input8
[   10.016160] usbcore: registered new interface driver uvcvideo
[   10.016162] USB Video Class driver (1.1.1)
[   10.052933] input: HP WMI hotkeys as /devices/virtual/input/input9
[   10.161226] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC270: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.161233] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.161237] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.161240] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.161242] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.161247] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   10.161250] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   10.262960] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   10.266842] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   10.267009] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   10.317374] kvm: Nested Virtualization enabled
[   10.317382] kvm: Nested Paging enabled
[   10.488603] [drm] radeon kernel modesetting enabled.
[   10.499216] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x103C:0x3577 0x00).
[   10.499289] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[   10.499297] caller pci_map_rom+0x6a/0x1b0 mapping multiple BARs
[   10.500032] ATOM BIOS: HP
[   10.500109] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[   10.500114] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[   10.500122] [drm] Detected VRAM RAM=384M, BAR=256M
[   10.500124] [drm] RAM width 32bits DDR
[   10.509077] [TTM] Zone  kernel: Available graphics memory: 3880870 kiB
[   10.509081] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   10.509083] [TTM] Initializing pool allocator
[   10.509095] [TTM] Initializing DMA pool allocator
[   10.509143] [drm] radeon: 384M of VRAM memory ready
[   10.509146] [drm] radeon: 1024M of GTT memory ready.
[   10.509176] [drm] Loading PALM Microcode
[   10.510329] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[   10.510783] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[   10.513386] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[   10.513402] [drm] Internal thermal controller without fan control
[   10.513536] [drm] Found smc ucode version: 0x00010601
[   10.513640] [drm] radeon: dpm initialized
[   10.514717] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[   10.514809] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   10.556551] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[   10.559416] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[   10.565139] radeon 0000:00:01.0: WB enabled
[   10.565149] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(____ptrval____)
[   10.565153] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(____ptrval____)
[   10.565579] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(____ptrval____)
[   10.565585] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.565586] [drm] Driver supports precise vblank timestamp query.
[   10.565589] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[   10.565682] radeon 0000:00:01.0: radeon: using MSI.
[   10.565733] [drm] radeon: irq initialized.
[   10.570041] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
[   10.613102] [drm] ring test on 0 succeeded in 1 usecs
[   10.613115] [drm] ring test on 3 succeeded in 3 usecs
[   10.674243] [drm] ring test on 5 succeeded in 1 usecs
[   10.674267] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.684751] rt2800pci 0000:07:00.0 wlo1: renamed from wlan0
[   10.703087] [drm] UVD initialized successfully.
[   10.706067] [drm] ib test on ring 0 succeeded in 0 usecs
[   10.706126] [drm] ib test on ring 3 succeeded in 0 usecs
[   11.163000] random: crng init done
[   11.163008] random: 7 urandom warning(s) missed due to ratelimiting
[   11.237069] [drm] ib test on ring 5 succeeded
[   11.373726] [drm] radeon atom DIG backlight initialized
[   11.373735] [drm] Radeon Display Connectors
[   11.373739] [drm] Connector 0:
[   11.373741] [drm]   LVDS-1
[   11.373743] [drm]   HPD1
[   11.373747] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   11.373748] [drm]   Encoders:
[   11.373750] [drm]     LCD1: INTERNAL_UNIPHY
[   11.373751] [drm] Connector 1:
[   11.373753] [drm]   HDMI-A-1
[   11.373754] [drm]   HPD2
[   11.373757] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   11.373758] [drm]   Encoders:
[   11.373759] [drm]     DFP1: INTERNAL_UNIPHY
[   11.373761] [drm] Connector 2:
[   11.373762] [drm]   VGA-1
[   11.373765] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   11.373766] [drm]   Encoders:
[   11.373767] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   11.919164] [drm] fb mappable at 0xE0366000
[   11.919170] [drm] vram apper at 0xE0000000
[   11.919171] [drm] size 4325376
[   11.919173] [drm] fb depth is 24
[   11.919174] [drm]    pitch is 5632
[   11.919721] fbcon: radeondrmfb (fb0) is primary device
[   12.322533] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   12.323864] r8169 0000:06:00.0: firmware: direct-loading firmware rtl_nic/rtl8105e-1.fw
[   12.324545] Generic PHY r8169-600:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
[   12.405987] Console: switching to colour frame buffer device 170x48
[   12.412370] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   12.427697] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[   12.615215] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   12.669975] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   12.670176] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[   12.672771] rt2800pci 0000:07:00.0: firmware: direct-loading firmware rt2860.bin
[   12.672792] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[   12.818996] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   12.890404] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   13.038337] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   14.203580] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   15.377988] wlo1: authenticate with 04:d9:f5:74:e8:c8
[   15.385047] wlo1: send auth to 04:d9:f5:74:e8:c8 (try 1/3)
[   15.386812] wlo1: authenticated
[   15.393017] wlo1: associate with 04:d9:f5:74:e8:c8 (try 1/3)
[   15.401014] wlo1: RX AssocResp from 04:d9:f5:74:e8:c8 (capab=0x1411 status=0 aid=1)
[   15.401233] wlo1: associated
[   15.484864] fuse init (API version 7.27)
[   15.545743] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 1651.210944] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500

Many thanks in advance  smile

Offline

Board footer

Powered by FluxBB