You are not logged in.
hallo unklar
Bei mihr alles gut
1
20
23
Ensoleillé
S
7 km/h
59 %
1020.0 mbar
3 Modéré
0 %
NO INDOOR HUMIDITY FOR YOU DISGUSTING NON-ENGLISH SPEAKER
12
16 km
07:04
19:50
12:46
7 km/h
00:33
17:21
16:48
12200 m
a
07:04
19:50
00:33
17:21
1
Linuxmint 22.1 Xia xfce & mageia 9 XFCE on ssd hp pavilion g7
Xubuntu 18.04 lts & 24.04 lts on ASUS Rog STRIX
Offline
Excuse me, "it was" called for dinner...
There is tarte flambée and Federweiser... {)![]()
https://scrot.cloud/images/2020/09/11/IMG_20200911_182035.th.jpg
Never seen red Federweisser... shouldn't that be "Federroter" then?
It's been a while since I had sth like that, not living in central Europe anymore..
Good stuff. Tasty, but also goes to your head...
Offline
Sorry for the delay guys, love your greek S11 and your food and drink choices unklar.
Back from out of town, but still no time to look into the matter.
Will be taken care of as soon as I have some spare time.
Thank you all for reporting back.
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Offline
Συλλαβίζω ελληνικά: 34.192.174.120
If I tried without 34.192.174.120 it would probably be closer to Martian
- except to a native Martian of course.
I'm attempting to be multi-lingual
English and Profanity isn't always acceptable.
Debian 12 Beardog, SoxDog and still a Conky 1.9er
Offline
unklar wrote:Excuse me, "it was" called for dinner...
There is tarte flambée and Federweiser... {)![]()
https://scrot.cloud/images/2020/09/11/IMG_20200911_182035.th.jpgNever seen red Federweisser... shouldn't that be "Federroter" then?
It's been a while since I had sth like that, not living in central Europe anymore..
Good stuff. Tasty, but also goes to your head...
Name-giving: Why is it called Federweisser?
Federweisser owes its name to the tiny yeast particles that are stirred up by the carbonic acid and dance like little feathers in this semi-finished white wine.
Here and in Austria (where I met him) there is white; red and rose'.
It is grape must on the "way to young wine".
4-5% alc. can be withstood ]:D
If you keep it in the refrigerator, the fermentation process is slow and the alcohol content increases slowly.
By the way, the bottles are only sold standing up, because the closure must not be tight.
Offline
Offline
There is an error in Weather_com again
It concerns the hourly output. The images no longer match the original. I do not know since when.Do you have this error too?
No.
Ten day and hourly Italy working
Cheers
Offline
Image: Weather.com looks good here
- from the link in my weather·com script
Image: wttr.in
- this should get your weather according to your ISP I believe
- https://wttr.in/
Image: DarkSky
- find your city
- https://darksky.net
Image: Meteored
- an Argentina based weather station.
- https://www.meteored.com.ar/
None of them agree with TN on TV: 12.7° and ST 12.7° - Sunny
- but they are within an acceptable range for this old man.
@ ector1935 - what version of inkscape did you downgrade to?
_______________________________________
Man with two watches never sure what time it is
Man with two weather stations never sure about the weather.
- - and with three or more of either: total confusion sets in.
Debian 12 Beardog, SoxDog and still a Conky 1.9er
Offline
Image: Weather.com looks good here
- from the link in my weather·com scriptImage: wttr.in
- this should get your weather according to your ISP I believe
- https://wttr.in/Image: DarkSky
- find your city
- https://darksky.netImage: Meteored
- an Argentina based weather station.
- https://www.meteored.com.ar/None of them agree with TN on TV: 12.7° and ST 12.7° - Sunny
- but they are within an acceptable range for this old man.
@ ector1935 - what version of inkscape did you downgrade to?
_______________________________________
Man with two watches never sure what time it is
Man with two weather stations never sure about the weather.
- - and with three or more of either: total confusion sets in.
Hi,Sector11
inkscape 1.0
Cheers
Offline
Hi,Sector11
inkscape 1.0
Cheers
Buon pomeriggio ector1935,
Tutto bene qui, la mia versione è:
14 Sep 20 @ 12:40:11 ~
$ inkscape --version
Inkscape 0.92.4 (5da689c313, 2019-01-14)
14 Sep 20 @ 12:40:27 ~
$
Parlo: https://www.deepl.com/
Debian 12 Beardog, SoxDog and still a Conky 1.9er
Offline
Hi Sector, i forgot to mention that i use archlinux.
the latest version of inkscape on arch and 1.0.1-1
extra/inkscape 1.0.1-1 (18.0 MiB 154.7 MiB) (Installed: 1.0-6)
Sorry
Cheers
Last edited by ector1935 (2020-09-14 21:35:08)
Offline
No problem with weather.com's hourly forecast and the images show up correctly.
I don't have inkscape on my system (I use Arch by the way ) but I have imagemagick.
@ector1935
Unless you need inkscape for something else, maybe you should try uninstalling it.
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Offline
Interesting, I have both inkscape and imagemagick here.
Debian 12 Beardog, SoxDog and still a Conky 1.9er
Offline
@ ector1935
Yes I know you use Arch from other posts.
Debian 12 Beardog, SoxDog and still a Conky 1.9er
Offline
Name-giving: Why is it called Federweisser?
"Roter Rauscher" - ha, that sounds about right! Good stuff, good buzz.
Offline
There is an error in Weather_com again
It concerns the hourly output. The images no longer match the original. I do not know since when.Do you have this error too?
Thank you ector1935 and Sector11 for helping me.
The problem is solved.
Finally I noticed this error message in the terminal again and again:
/home/unklar/Weather_com_conky_script/weather_com: Zeile 242: convert: Kommando nicht gefunden.
/home/unklar/Weather_com_conky_script/weather_com: Zeile 242: convert: Kommando nicht gefunden.
So I installed inkscape(0.92.4-3) and in Litium there are these messages among others:
imagemagick-6.q16 (8:6.9.10.23+dfsg-2.1+deb10u1) wird eingerichtet ...
update-alternatives: /usr/bin/compare-im6.q16 wird verwendet, um /usr/bin/compare (compare) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/compare-im6.q16 wird verwendet, um /usr/bin/compare-im6 (compare-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/animate-im6.q16 wird verwendet, um /usr/bin/animate (animate) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/animate-im6.q16 wird verwendet, um /usr/bin/animate-im6 (animate-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/convert-im6.q16 wird verwendet, um /usr/bin/convert (convert) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/convert-im6.q16 wird verwendet, um /usr/bin/convert-im6 (convert-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/composite-im6.q16 wird verwendet, um /usr/bin/composite (composite) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/composite-im6.q16 wird verwendet, um /usr/bin/composite-im6 (composite-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/conjure-im6.q16 wird verwendet, um /usr/bin/conjure (conjure) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/conjure-im6.q16 wird verwendet, um /usr/bin/conjure-im6 (conjure-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/import-im6.q16 wird verwendet, um /usr/bin/import (import) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/import-im6.q16 wird verwendet, um /usr/bin/import-im6 (import-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/identify-im6.q16 wird verwendet, um /usr/bin/identify (identify) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/identify-im6.q16 wird verwendet, um /usr/bin/identify-im6 (identify-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/stream-im6.q16 wird verwendet, um /usr/bin/stream (stream) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/stream-im6.q16 wird verwendet, um /usr/bin/stream-im6 (stream-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/display-im6.q16 wird verwendet, um /usr/bin/display (display) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/display-im6.q16 wird verwendet, um /usr/bin/display-im6 (display-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/montage-im6.q16 wird verwendet, um /usr/bin/montage (montage) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/montage-im6.q16 wird verwendet, um /usr/bin/montage-im6 (montage-im6) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/mogrify-im6.q16 wird verwendet, um /usr/bin/mogrify (mogrify) im automatischen Modus bereitzustellen
update-alternatives: /usr/bin/mogrify-im6.q16 wird verwendet, um /usr/bin/mogrify-im6 (mogrify-im6) im automatischen Modus bereitzustellen
I have several BL-Lithium installations and I remember not installing in this inkscape on purpose. That was born out of that.
In the meantime there have been updates to the imagemagick package.
Last edited by unklar (2020-09-15 07:08:03)
Offline
So, did you uninstall inkscape or did you keep it?
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Please make Autocad Civil 3D and Archicad work on Linux!
Offline
unklar wrote:There is an error in Weather_com again
It concerns the hourly output. The images no longer match the original. I do not know since when.Do you have this error too?
Thank you ector1935 and Sector11 for helping me.
The problem is solved.
Finally I noticed this error message in the terminal again and again:/home/unklar/Weather_com_conky_script/weather_com: Zeile 242: convert: Kommando nicht gefunden. /home/unklar/Weather_com_conky_script/weather_com: Zeile 242: convert: Kommando nicht gefunden.
So I installed inkscape(0.92.4-3) and in Litium there are these messages among others:
imagemagick-6.q16 (8:6.9.10.23+dfsg-2.1+deb10u1) wird eingerichtet ... update-alternatives: /usr/bin/compare-im6.q16 wird verwendet, um /usr/bin/compare (compare) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/compare-im6.q16 wird verwendet, um /usr/bin/compare-im6 (compare-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/animate-im6.q16 wird verwendet, um /usr/bin/animate (animate) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/animate-im6.q16 wird verwendet, um /usr/bin/animate-im6 (animate-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/convert-im6.q16 wird verwendet, um /usr/bin/convert (convert) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/convert-im6.q16 wird verwendet, um /usr/bin/convert-im6 (convert-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/composite-im6.q16 wird verwendet, um /usr/bin/composite (composite) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/composite-im6.q16 wird verwendet, um /usr/bin/composite-im6 (composite-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/conjure-im6.q16 wird verwendet, um /usr/bin/conjure (conjure) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/conjure-im6.q16 wird verwendet, um /usr/bin/conjure-im6 (conjure-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/import-im6.q16 wird verwendet, um /usr/bin/import (import) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/import-im6.q16 wird verwendet, um /usr/bin/import-im6 (import-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/identify-im6.q16 wird verwendet, um /usr/bin/identify (identify) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/identify-im6.q16 wird verwendet, um /usr/bin/identify-im6 (identify-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/stream-im6.q16 wird verwendet, um /usr/bin/stream (stream) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/stream-im6.q16 wird verwendet, um /usr/bin/stream-im6 (stream-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/display-im6.q16 wird verwendet, um /usr/bin/display (display) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/display-im6.q16 wird verwendet, um /usr/bin/display-im6 (display-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/montage-im6.q16 wird verwendet, um /usr/bin/montage (montage) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/montage-im6.q16 wird verwendet, um /usr/bin/montage-im6 (montage-im6) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/mogrify-im6.q16 wird verwendet, um /usr/bin/mogrify (mogrify) im automatischen Modus bereitzustellen update-alternatives: /usr/bin/mogrify-im6.q16 wird verwendet, um /usr/bin/mogrify-im6 (mogrify-im6) im automatischen Modus bereitzustellen
I have several BL-Lithium installations and I remember not installing in this inkscape on purpose. That was born out of that.
In the meantime there have been updates to the imagemagick package.
Hi,hunklar last update [2020-09-08T12:06:44+0200] [ALPM] upgraded imagemagick (7.0.10.28-1
-> 7.0.10.29-1)
the conky with black bands as shown in the photo started with the update of inkscape
Cheers
Offline