You are not logged in.

#1 2022-04-17 17:28:38

juancuyo
Member
Registered: 2017-11-17
Posts: 66

Interference between Caliber and Evince

Hello, good afternoon, I have tried to read some fb2 files and Evince does not read them, it turns out that Caliber reads them, install the application (It is not an application of my liking) and indeed I was able to read the documentation, when I wanted to open a PDF with evince that I was already reading, it did not open it, instead I tried Calibre, which did not open it either, Conclusion :  uninstall Caliber but it turns out that not even reinstalling evince it opens the documents. What happened? can you guide me??? I need both applications working and now I don't know how to solve it.
I've tried looking in Applications/Settings/Alternatives Settings but didn't see anything related to evince or Caliber

Offline

#2 2022-04-17 18:18:41

rbh
Moderator
From: Sweden/Vasterbotten/Rusfors
Registered: 2016-08-11
Posts: 1,513

Re: Interference between Caliber and Evince

Here you have a list of applications that can open *.fb2-files: https://fileinfo.com/extension/fb2.

Here how to tell thunar to open files with specific application; https://docs.xfce.org/xfce/thunar/worki … nd-folders


// Regards rbh

Please read before requesting help: Guide to getting help,
Introduction to the Bunsenlabs Lithium Desktop and other help topics under "Help Resources" on the BunsenLabs menu

Offline

#3 2022-04-17 19:50:26

juancuyo
Member
Registered: 2017-11-17
Posts: 66

Re: Interference between Caliber and Evince

Both in the two specified cases, with the context menu, or with file properties, the document viewer is selected, it starts to open and closes without showing a single image. Where else should I modify to make it work? Evince with any format you open and Fb2 with Caliber Evince has the ability to select multiple colors for underlining text which comes in handy with pest and herbicide management texts.

Offline

#4 2022-04-17 21:48:11

juancuyo
Member
Registered: 2017-11-17
Posts: 66

Re: Interference between Caliber and Evince

Try to open Evince with the terminal and it sends this long notification maybe you can tell me how to solve it 

https://imgur.com/Iowt4Ed

Offline

#5 2022-04-18 00:20:56

hhh
Colonel Robert Neville
From: That honky paradise, brother.
Registered: 2015-09-17
Posts: 13,069
Website

Re: Interference between Caliber and Evince

juancuyo wrote:

Try to open Evince with the terminal and it sends this long notification maybe you can tell me how to solve it 

https://imgur.com/Iowt4Ed

Works for me, maybe you've hosed your operating system.

LygjmHIt.png

Provide log files, maybe that will give us a clue. My errors are just warnings because I've uninstalled accessibility (at-spi2-core). It all starts just fine.


You know, you used to be a nice guy once.

Offline

#6 2022-04-18 12:57:22

juancuyo
Member
Registered: 2017-11-17
Posts: 66

Re: Interference between Caliber and Evince

good morning the dmesg entry returns a long notification but it is the only one that reported an evince error

juan@debian:~$ dmesg
dmesg: read kernel buffer failed: Operación no permitida
juan@debian:~$ sudo dmesg
[sudo] password for juan:
[    0.000000] Linux version 4.19.0-20-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.235-1 (2022-03-17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-20-amd64 root=UUID=c34f05f4-1028-4169-9474-f686a14b3cb8 ro quiet
[    0.000000] CPU0: Hyper-Threading is disabled
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007bedffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bee0000-0x000000007bee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007bee3000-0x000000007beeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007bef0000-0x000000007befffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI:  /P4M800CE-8237, BIOS 6.00 PG 10/11/2006
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3073.616 MHz processor
[    0.003117] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.003121] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.003135] AGP: pci 0000:00:00:00: AGP bridge
[    0.003141] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe8000000-0xe9ffffff] (old size 32MB)
[    0.003143] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe8000000-0xefffffff] (128MB, APSIZE 0xf20)
[    0.003237] last_pfn = 0x7bee0 max_arch_pfn = 0x400000000
[    0.003249] MTRR default type: uncachable
[    0.003251] MTRR fixed ranges enabled:
[    0.003254]   00000-9FFFF write-back
[    0.003256]   A0000-BFFFF uncachable
[    0.003258]   C0000-C8FFF write-protect
[    0.003259]   C9000-EFFFF uncachable
[    0.003261]   F0000-F7FFF write-through
[    0.003263]   F8000-F8FFF uncachable
[    0.003264]   F9000-FFFFF write-through
[    0.003266] MTRR variable ranges enabled:
[    0.003268]   0 base 000000000 mask F80000000 write-back
[    0.003271]   1 base 07C000000 mask FFC000000 uncachable
[    0.003273]   2 base 0E8000000 mask FF8000000 write-combining
[    0.003275]   3 base 07BF00000 mask FFFF00000 uncachable
[    0.003276]   4 disabled
[    0.003277]   5 disabled
[    0.003279]   6 disabled
[    0.003280]   7 disabled
[    0.003693] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC 
[    0.009599] found SMP MP-table at [mem 0x000f34d0-0x000f34df]
[    0.028155] RAMDISK: [mem 0x32c39000-0x35613fff]
[    0.028167] ACPI: Early table checksum verification disabled
[    0.032221] ACPI: RSDP 0x00000000000F7660 000014 (v00 P4M80P)
[    0.032229] ACPI: RSDT 0x000000007BEE3040 00002C (v01 P4M80P AWRDACPI 42302E31 AWRD 00000000)
[    0.032240] ACPI: FACP 0x000000007BEE30C0 000074 (v01 P4M80P AWRDACPI 42302E31 AWRD 00000000)
[    0.032251] ACPI: DSDT 0x000000007BEE3180 0054B5 (v01 P4M80P AWRDACPI 00001000 MSFT 0100000E)
[    0.032257] ACPI: FACS 0x000000007BEE0000 000040
[    0.032262] ACPI: APIC 0x000000007BEE8680 000084 (v01 P4M80P AWRDACPI 42302E31 AWRD 00000000)
[    0.032268] ACPI: Reserving FACP table memory at [mem 0x7bee30c0-0x7bee3133]
[    0.032270] ACPI: Reserving DSDT table memory at [mem 0x7bee3180-0x7bee8634]
[    0.032271] ACPI: Reserving FACS table memory at [mem 0x7bee0000-0x7bee003f]
[    0.032273] ACPI: Reserving APIC table memory at [mem 0x7bee8680-0x7bee8703]
[    0.032293] ACPI: Local APIC address 0xfee00000
[    0.032449] No NUMA configuration found
[    0.032451] Faking a node at [mem 0x0000000000000000-0x000000007bedffff]
[    0.032460] NODE_DATA(0) allocated [mem 0x7bedb000-0x7bedffff]
[    0.032548] Zone ranges:
[    0.032551]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.032554]   DMA32    [mem 0x0000000001000000-0x000000007bedffff]
[    0.032556]   Normal   empty
[    0.032558]   Device   empty
[    0.032560] Movable zone start for each node
[    0.032561] Early memory node ranges
[    0.032563]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.032565]   node   0: [mem 0x0000000000100000-0x000000007bedffff]
[    0.033713] Zeroed struct page in unavailable ranges: 16770 pages
[    0.033725] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bedffff]
[    0.033731] On node 0 totalpages: 507518
[    0.033735]   DMA zone: 64 pages used for memmap
[    0.033737]   DMA zone: 21 pages reserved
[    0.033740]   DMA zone: 3998 pages, LIFO batch:0
[    0.034130]   DMA32 zone: 7868 pages used for memmap
[    0.034132]   DMA32 zone: 503520 pages, LIFO batch:63
[    0.080744] ACPI: PM-Timer IO Port: 0x408
[    0.080752] ACPI: Local APIC address 0xfee00000
[    0.080770] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.080772] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.080774] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.080775] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.080816] IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
[    0.080821] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.080824] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.080827] ACPI: IRQ0 used by override.
[    0.080829] ACPI: IRQ9 used by override.
[    0.080833] Using ACPI (MADT) for SMP configuration information
[    0.080840] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[    0.080875] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.080878] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.080879] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.080880] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.080885] [mem 0x7bf00000-0xfebfffff] available for PCI devices
[    0.080887] Booting paravirtualized kernel on bare hardware
[    0.080896] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.361985] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0
[    0.362005] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.365973] percpu: Embedded 50 pages/cpu s165016 r8192 d31592 u524288
[    0.365992] pcpu-alloc: s165016 r8192 d31592 u524288 alloc=1*2097152
[    0.365996] pcpu-alloc: [0] 0 1 2 3
[    0.366052] Built 1 zonelists, mobility grouping on.  Total pages: 499565
[    0.366055] Policy zone: DMA32
[    0.366062] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-20-amd64 root=UUID=c34f05f4-1028-4169-9474-f686a14b3cb8 ro quiet
[    0.366299] AGP: Checking aperture...
[    0.366308] AGP: pci 0000:00:00:00: AGP bridge
[    0.366315] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe8000000-0xe9ffffff] (old size 32MB)
[    0.366318] AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe8000000-0xefffffff] (128MB, APSIZE 0xf20)
[    0.366411] Calgary: detecting Calgary via BIOS EBDA area
[    0.366414] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.419767] Memory: 1927636K/2030072K available (10252K kernel code, 1243K rwdata, 3328K rodata, 1620K init, 2232K bss, 102436K reserved, 0K cma-reserved)
[    0.420089] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.420115] Kernel/User page tables isolation: enabled
[    0.420207] ftrace: allocating 32023 entries in 126 pages
[    0.447834] rcu: Hierarchical RCU implementation.
[    0.447840] rcu:     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.447843] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.453569] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.456362] Console: colour VGA+ 80x25
[    0.456376] console [tty0] enabled
[    0.456445] ACPI: Core revision 20180810
[    0.456632] APIC: Switch to symmetric I/O mode setup
[    0.457949] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.476629] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c4debdfcc7, max_idle_ns: 440795336185 ns
[    0.476668] Calibrating delay loop (skipped), value calculated using timer frequency.. 6147.23 BogoMIPS (lpj=12294464)
[    0.476673] pid_max: default: 32768 minimum: 301
[    0.476749] Security Framework initialized
[    0.476752] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.476801] AppArmor: AppArmor initialized
[    0.479563] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.481209] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.481338] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.481386] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.482052] CPU0: Thermal monitoring enabled (TM1)
[    0.482063] process: using mwait in idle threads
[    0.482073] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.482075] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.482079] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.482082] Spectre V2 : Mitigation: Retpolines
[    0.482083] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.482085] Speculative Store Bypass: Vulnerable
[    0.482158] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.608545] smpboot: CPU0: Intel(R) Celeron(R) D CPU 3.06GHz (family: 0xf, model: 0x6, stepping: 0x4)
[    0.608634] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.608634] ... version:                0
[    0.608634] ... bit width:              40
[    0.608634] ... generic registers:      18
[    0.608634] ... value mask:             000000ffffffffff
[    0.608634] ... max period:             0000007fffffffff
[    0.608634] ... fixed-purpose events:   0
[    0.608634] ... event mask:             000000000003ffff
[    0.608634] rcu: Hierarchical SRCU implementation.
[    0.608634] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.608634] smp: Bringing up secondary CPUs ...
[    0.608634] smp: Brought up 1 node, 1 CPU
[    0.608634] smpboot: Max logical packages: 4
[    0.608634] smpboot: Total of 1 processors activated (6147.23 BogoMIPS)
[    0.608634] devtmpfs: initialized
[    0.608634] x86/mm: Memory block size: 128MB
[    0.608634] PM: Registering ACPI NVS region [mem 0x7bee0000-0x7bee2fff] (12288 bytes)
[    0.608634] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.608634] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.608634] pinctrl core: initialized pinctrl subsystem
[    0.608850] NET: Registered protocol family 16
[    0.609019] audit: initializing netlink subsys (disabled)
[    0.609421] cpuidle: using governor ladder
[    0.609425] cpuidle: using governor menu
[    0.609497] ACPI: bus type PCI registered
[    0.609502] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.609648] PCI: Using configuration type 1 for base access
[    0.611238] audit: type=2000 audit(1650285512.152:1): state=initialized audit_enabled=0 res=1
[    0.611509] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.612164] ACPI: Added _OSI(Module Device)
[    0.612167] ACPI: Added _OSI(Processor Device)
[    0.612169] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.612170] ACPI: Added _OSI(Processor Aggregator Device)
[    0.612172] ACPI: Added _OSI(Linux-Dell-Video)
[    0.612174] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.616115] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.619694] ACPI: Interpreter enabled
[    0.619739] ACPI: (supports S0 S1 S4 S5)
[    0.619743] ACPI: Using IOAPIC for interrupt routing
[    0.619805] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.620164] ACPI: Enabled 8 GPEs in block 00 to 0F
[    0.630515] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.630530] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.630540] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.630558] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.630936] PCI host bridge to bus 0000:00
[    0.630941] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.630944] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.630946] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.630948] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.630951] pci_bus 0000:00: root bus resource [mem 0x7bf00000-0xfebfffff window]
[    0.630954] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.630977] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
[    0.630998] pci 0000:00:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[    0.631202] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
[    0.631363] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
[    0.631513] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
[    0.631668] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
[    0.631823] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
[    0.631977] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.632044] pci 0000:00:01.0: supports D1
[    0.632176] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f
[    0.632202] pci 0000:00:0f.0: reg 0x10: [io  0xb000-0xb007]
[    0.632213] pci 0000:00:0f.0: reg 0x14: [io  0xb400-0xb403]
[    0.632224] pci 0000:00:0f.0: reg 0x18: [io  0xb800-0xb807]
[    0.632235] pci 0000:00:0f.0: reg 0x1c: [io  0xbc00-0xbc03]
[    0.632245] pci 0000:00:0f.0: reg 0x20: [io  0xc000-0xc00f]
[    0.632256] pci 0000:00:0f.0: reg 0x24: [io  0xc400-0xc4ff]
[    0.632429] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.632490] pci 0000:00:0f.1: reg 0x20: [io  0xc800-0xc80f]
[    0.632514] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.632516] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.632518] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.632520] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.632717] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.632774] pci 0000:00:10.0: reg 0x20: [io  0xcc00-0xcc1f]
[    0.632826] pci 0000:00:10.0: supports D1 D2
[    0.632829] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.632968] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.633025] pci 0000:00:10.1: reg 0x20: [io  0xd000-0xd01f]
[    0.633078] pci 0000:00:10.1: supports D1 D2
[    0.633080] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.633208] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.633266] pci 0000:00:10.2: reg 0x20: [io  0xd400-0xd41f]
[    0.633317] pci 0000:00:10.2: supports D1 D2
[    0.633319] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.633456] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.633513] pci 0000:00:10.3: reg 0x20: [io  0xd800-0xd81f]
[    0.633564] pci 0000:00:10.3: supports D1 D2
[    0.633566] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.633698] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.633722] pci 0000:00:10.4: reg 0x10: [mem 0xf6000000-0xf60000ff]
[    0.633807] pci 0000:00:10.4: supports D1 D2
[    0.633809] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.633940] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    0.634025] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.634188] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.634212] pci 0000:00:11.5: reg 0x10: [io  0xdc00-0xdcff]
[    0.634301] pci 0000:00:11.5: supports D1 D2
[    0.634431] pci 0000:00:11.6: [1106:3068] type 00 class 0x078000
[    0.634455] pci 0000:00:11.6: reg 0x10: [io  0xe000-0xe0ff]
[    0.634674] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.634698] pci 0000:00:12.0: reg 0x10: [io  0xe400-0xe4ff]
[    0.634709] pci 0000:00:12.0: reg 0x14: [mem 0xf6001000-0xf60010ff]
[    0.634787] pci 0000:00:12.0: supports D1 D2
[    0.634789] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.634955] pci_bus 0000:01: extended config space not accessible
[    0.634996] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000
[    0.635014] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf3ffffff pref]
[    0.635022] pci 0000:01:00.0: reg 0x14: [mem 0xf4000000-0xf4ffffff]
[    0.635058] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.635095] pci 0000:01:00.0: supports D1 D2
[    0.635181] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.635189] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.635193] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.636053] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[    0.636218] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[    0.636387] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[    0.636537] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.636702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.636830] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.636956] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.637083] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.637282] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[    0.637459] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[    0.637606] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[    0.637786] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[    0.639299] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.639304] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.639307] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.639309] vgaarb: loaded
[    0.639464] pps_core: LinuxPPS API ver. 1 registered
[    0.639466] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.639472] PTP clock support registered
[    0.639494] EDAC MC: Ver: 3.0.0
[    0.639854] PCI: Using ACPI for IRQ routing
[    0.639862] PCI: pci_cache_line_size set to 64 bytes
[    0.639943] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.639946] e820: reserve RAM buffer [mem 0x7bee0000-0x7bffffff]
[    0.642778] clocksource: Switched to clocksource tsc-early
[    0.664754] VFS: Disk quotas dquot_6.6.0
[    0.664789] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.665068] AppArmor: AppArmor Filesystem Enabled
[    0.665124] pnp: PnP ACPI init
[    0.665573] system 00:00: [mem 0x000c9000-0x000cbfff] has been reserved
[    0.665578] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.665581] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.665583] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.665586] system 00:00: [mem 0x7bee0000-0x7befffff] could not be reserved
[    0.665588] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[    0.665591] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.665594] system 00:00: [mem 0x00100000-0x7bedffff] could not be reserved
[    0.665596] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.665598] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.665601] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.665613] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.665729] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.665732] system 00:01: [io  0x0500-0x050f] has been reserved
[    0.665741] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.666901] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.666905] system 00:02: [io  0x0800-0x0805] has been reserved
[    0.666908] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.666917] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.666974] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.667223] pnp 00:04: [dma 2]
[    0.667280] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.667658] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.668287] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.668600] pnp: PnP ACPI: found 7 devices
[    0.676066] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.676131] pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf500ffff pref]
[    0.676136] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.676146] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.676150] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.676159] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.676162] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.676165] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.676167] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.676170] pci_bus 0000:00: resource 8 [mem 0x7bf00000-0xfebfffff window]
[    0.676173] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
[    0.676175] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[    0.676392] NET: Registered protocol family 2
[    0.676679] IP idents hash table entries: 32768 (order: 6, 262144 bytes)
[    0.677784] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.677828] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.678001] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.678250] TCP: Hash tables configured (established 16384 bind 16384)
[    0.678631] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.678689] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.678908] NET: Registered protocol family 1
[    0.678922] NET: Registered protocol family 44
[    0.678966] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.679416] PCI Interrupt Link [ALKB] enabled at IRQ 21
[    0.680811] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.680840] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.680844] PCI: CLS 32 bytes, default 64
[    0.680958] Unpacking initramfs...
[    1.911543] Freeing initrd memory: 42860K
[    1.913064] Initialise system trusted keyrings
[    1.913087] Key type blacklist registered
[    1.913230] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    1.915532] zbud: loaded
[    2.244360] Key type asymmetric registered
[    2.244365] Asymmetric key parser 'x509' registered
[    2.244414] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.244513] io scheduler noop registered
[    2.244515] io scheduler deadline registered
[    2.244681] io scheduler cfq registered (default)
[    2.244683] io scheduler mq-deadline registered
[    2.245061] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.245451] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.266036] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.266814] Linux agpgart interface v0.103
[    2.266932] agpgart: Detected VIA VT3314 chipset
[    2.276757] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[    2.276843] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.276844] AMD IOMMUv2 functionality not available on this system
[    2.277035] i8042: PNP: No PS/2 controller found.
[    2.277036] i8042: Probing ports directly.
[    2.532783] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.533018] mousedev: PS/2 mouse device common for all mice
[    2.533125] rtc_cmos 00:03: RTC can wake from S4
[    2.533381] rtc_cmos 00:03: registered as rtc0
[    2.533420] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[    2.533466] ledtrig-cpu: registered to indicate activity on CPUs
[    2.534093] NET: Registered protocol family 10
[    2.555181] Segment Routing with IPv6
[    2.555237] mip6: Mobile IPv6
[    2.555244] NET: Registered protocol family 17
[    2.555335] mpls_gso: MPLS GSO support
[    2.555503] mce: Using 4 MCE banks
[    2.555606] microcode: sig=0xf64, pf=0x4, revision=0x4
[    2.555702] microcode: Microcode Update Driver: v2.2.
[    2.555726] sched_clock: Marking stable (2549918041, 2740017)->(2558707682, -6049624)
[    2.556025] registered taskstats version 1
[    2.556028] Loading compiled-in X.509 certificates
[    2.631492] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    2.631527] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    2.631598] zswap: loaded using pool lzo/zbud
[    2.631701] AppArmor: AppArmor sha1 policy hashing enabled
[    2.632439] rtc_cmos 00:03: setting system clock to 2022-04-18 12:38:34 UTC (1650285514)
[    2.637373] Freeing unused kernel image memory: 1620K
[    2.648654] Write protecting the kernel read-only data: 16384k
[    2.652068] Freeing unused kernel image memory: 2028K
[    2.653449] Freeing unused kernel image memory: 768K
[    2.671018] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.671109] x86/mm: Checking user space page tables
[    2.688377] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.688382] Run /init as init process
[    2.920679] tsc: Refined TSC clocksource calibration: 3073.636 MHz
[    2.920693] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c4dff0b06b, max_idle_ns: 440795342726 ns
[    2.920723] clocksource: Switched to clocksource tsc
[    3.164733] FDC 0 is a post-1991 82077
[    3.213620] thermal LNXTHERM:00: registered as thermal_zone0
[    3.213625] ACPI: Thermal Zone [THRM] (20 C)
[    3.287953] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    3.287960] via_rhine: Broken BIOS detected, avoid_D3 enabled
[    3.288444] PCI Interrupt Link [ALKD] enabled at IRQ 23
[    3.305163] SCSI subsystem initialized
[    3.329809] ACPI: bus type USB registered
[    3.329883] usbcore: registered new interface driver usbfs
[    3.329906] usbcore: registered new interface driver hub
[    3.329941] usbcore: registered new device driver usb
[    3.351903] via-rhine 0000:00:12.0 eth0: VIA Rhine II at (____ptrval____), 00:19:21:40:f7:fb, IRQ 23
[    3.352690] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
[    3.360092] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.380575] uhci_hcd: USB Universal Host Controller Interface driver
[    3.384351] ehci-pci: EHCI PCI platform driver
[    3.397394] ehci-pci 0000:00:10.4: EHCI Host Controller
[    3.397412] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[    3.397507] ehci-pci 0000:00:10.4: irq 21, io mem 0xf6000000
[    3.398522] libata version 3.00 loaded.
[    3.400305] pata_via 0000:00:0f.1: version 0.3.4
[    3.400904] PCI Interrupt Link [ALKA] enabled at IRQ 20
[    3.410974] sata_via 0000:00:0f.0: version 2.6
[    3.411271] sata_via 0000:00:0f.0: routed to hard irq line 11
[    3.412778] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    3.412950] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    3.412953] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.412955] usb usb1: Product: EHCI Host Controller
[    3.412957] usb usb1: Manufacturer: Linux 4.19.0-20-amd64 ehci_hcd
[    3.412959] usb usb1: SerialNumber: 0000:00:10.4
[    3.413260] hub 1-0:1.0: USB hub found
[    3.413276] hub 1-0:1.0: 8 ports detected
[    3.413688] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    3.413699] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    3.413709] uhci_hcd 0000:00:10.0: detected 2 ports
[    3.413741] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00
[    3.413872] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.413874] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.413877] usb usb2: Product: UHCI Host Controller
[    3.413879] usb usb2: Manufacturer: Linux 4.19.0-20-amd64 uhci_hcd
[    3.413881] usb usb2: SerialNumber: 0000:00:10.0
[    3.414476] hub 2-0:1.0: USB hub found
[    3.414505] hub 2-0:1.0: 2 ports detected
[    3.415047] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    3.415061] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    3.415071] uhci_hcd 0000:00:10.1: detected 2 ports
[    3.415099] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000
[    3.415261] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.415264] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.415266] usb usb3: Product: UHCI Host Controller
[    3.415268] usb usb3: Manufacturer: Linux 4.19.0-20-amd64 uhci_hcd
[    3.415270] usb usb3: SerialNumber: 0000:00:10.1
[    3.415532] hub 3-0:1.0: USB hub found
[    3.415564] hub 3-0:1.0: 2 ports detected
[    3.417755] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    3.417781] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    3.417794] uhci_hcd 0000:00:10.2: detected 2 ports
[    3.417824] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400
[    3.418594] scsi host0: pata_via
[    3.419016] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.419020] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.419022] usb usb4: Product: UHCI Host Controller
[    3.419024] usb usb4: Manufacturer: Linux 4.19.0-20-amd64 uhci_hcd
[    3.419026] usb usb4: SerialNumber: 0000:00:10.2
[    3.420578] hub 4-0:1.0: USB hub found
[    3.420601] hub 4-0:1.0: 2 ports detected
[    3.423811] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    3.423830] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    3.423842] uhci_hcd 0000:00:10.3: detected 2 ports
[    3.423872] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d800
[    3.425655] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.425660] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.425663] usb usb5: Product: UHCI Host Controller
[    3.425665] usb usb5: Manufacturer: Linux 4.19.0-20-amd64 uhci_hcd
[    3.425667] usb usb5: SerialNumber: 0000:00:10.3
[    3.425870] scsi host2: pata_via
[    3.426015] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xc800 irq 14
[    3.426017] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xc808 irq 15
[    3.426520] hub 5-0:1.0: USB hub found
[    3.427905] hub 5-0:1.0: 2 ports detected
[    3.429308] scsi host1: sata_via
[    3.438410] scsi host3: sata_via
[    3.438580] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xc000 irq 20
[    3.438583] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc008 irq 20
[    3.493720] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
[    3.652657] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.804653] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    3.815236] ata3.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
[    3.815239] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.820217] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
[    4.003603] usb 3-1: New USB device found, idVendor=0458, idProduct=0186, bcdDevice=24.58
[    4.003608] usb 3-1: New USB device strings: Mfr=4, Product=40, SerialNumber=0
[    4.003611] usb 3-1: Product: Wired Mouse
[    4.003613] usb 3-1: Manufacturer: KYE SYSTEMS CORP.
[    4.028667] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.191077] ata4.00: ATAPI: DRW-24F1ST   d, 1.00, max UDMA/133
[    4.197071] scsi 3:0:0:0: CD-ROM            ASUS     DRW-24F1ST   d   1.00 PQ: 0 ANSI: 5
[    4.281152] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    4.281158] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    4.281172] sd 1:0:0:0: [sda] Write Protect is off
[    4.281175] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.281192] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.287769] hidraw: raw HID events driver (C) Jiri Kosina
[    4.299906] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.299913] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.301618] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    4.326473]  sda: sda1 sda2 < sda5 >
[    4.327231] sd 1:0:0:0: [sda] Attached SCSI disk
[    4.353981] usbhid 3-1:1.1: couldn't find an input interrupt endpoint
[    4.354072] usbcore: registered new interface driver usbhid
[    4.354074] usbhid: USB HID core driver
[    4.359754] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/0003:0458:0186.0001/input/input1
[    4.360490] hid-generic 0003:0458:0186.0001: input,hidraw0: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:10.1-1/input0
[    4.604714] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[    4.749342] random: fast init done
[    4.856669] raid6: sse2x1   gen()  2218 MB/s
[    4.924652] raid6: sse2x1   xor()  1838 MB/s
[    4.992656] raid6: sse2x2   gen()  2368 MB/s
[    5.060650] raid6: sse2x2   xor()  1912 MB/s
[    5.128653] raid6: sse2x4   gen()  2996 MB/s
[    5.196650] raid6: sse2x4   xor()  1899 MB/s
[    5.196652] raid6: using algorithm sse2x4 gen() 2996 MB/s
[    5.196654] raid6: .... xor() 1899 MB/s, rmw enabled
[    5.196656] raid6: using intx1 recovery algorithm
[    5.213760] xor: measuring software checksum speed
[    5.252642]    prefetch64-sse:  5599.000 MB/sec
[    5.292640]    generic_sse:  5668.000 MB/sec
[    5.292641] xor: using function: generic_sse (5668.000 MB/sec)
[    5.300464] usb 3-2: New USB device found, idVendor=1a2c, idProduct=0c21, bcdDevice= 1.10
[    5.300470] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.300473] usb 3-2: Product: USB Keyboard
[    5.300475] usb 3-2: Manufacturer: USB
[    5.361911] input: USB USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:1A2C:0C21.0002/input/input2
[    5.403922] Btrfs loaded, crc32c=crc32c-generic
[    5.421819] hid-generic 0003:1A2C:0C21.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:10.1-2/input0
[    5.442239] input: USB USB Keyboard Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/0003:1A2C:0C21.0003/input/input3
[    5.442817] input: USB USB Keyboard System Control as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/0003:1A2C:0C21.0003/input/input4
[    5.500866] input: USB USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/0003:1A2C:0C21.0003/input/input5
[    5.501327] hid-generic 0003:1A2C:0C21.0003: input,hidraw2: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:00:10.1-2/input1
[    5.642706] PM: Image not found (code -22)
[    5.857430] cryptd: max_cpu_qlen set to 1000
[    5.985836] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.435797] systemd[1]: Inserted module 'autofs4'
[    7.616406] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    7.616785] systemd[1]: Detected architecture x86-64.
[    7.641240] systemd[1]: Set hostname to <debian>.
[    7.758226] random: crng init done
[    9.004844] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.006715] systemd[1]: Created slice User and Session Slice.
[    9.007165] systemd[1]: Listening on Syslog Socket.
[    9.007576] systemd[1]: Listening on LVM2 poll daemon socket.
[    9.008033] systemd[1]: Listening on Journal Socket.
[    9.032410] systemd[1]: Starting Load Kernel Modules...
[    9.037232] systemd[1]: Mounting POSIX Message Queue File System...
[    9.451041] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   10.165304] systemd-journald[199]: Received request to flush runtime journal from PID 1
[   10.864519] audit: type=1400 audit(1650285522.724:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=223 comm="apparmor_parser"
[   10.864528] audit: type=1400 audit(1650285522.724:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=223 comm="apparmor_parser"
[   10.940380] audit: type=1400 audit(1650285522.800:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=230 comm="apparmor_parser"
[   10.940391] audit: type=1400 audit(1650285522.800:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=230 comm="apparmor_parser"
[   11.136094] audit: type=1400 audit(1650285522.996:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=240 comm="apparmor_parser"
[   11.136104] audit: type=1400 audit(1650285522.996:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=240 comm="apparmor_parser"
[   11.136108] audit: type=1400 audit(1650285522.996:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=240 comm="apparmor_parser"
[   11.136112] audit: type=1400 audit(1650285522.996:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=240 comm="apparmor_parser"
[   11.136116] audit: type=1400 audit(1650285522.996:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=240 comm="apparmor_parser"
[   11.251510] audit: type=1400 audit(1650285523.112:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=241 comm="apparmor_parser"
[   11.499796] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[   11.499819] ACPI: Power Button [PWRB]
[   11.508330] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[   11.509121] ACPI: Sleep Button [SLPB]
[   11.509357] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[   11.513990] ACPI: Power Button [PWRF]
[   11.751664] parport_pc 00:06: reported by Plug and Play ACPI
[   11.751770] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   11.860792] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   11.860955] sr 3:0:0:0: Attached scsi generic sg1 type 5
[   12.181723] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   12.872128] intel_powerclamp: No package C-state available
[   13.104562] PCI Interrupt Link [ALKC] enabled at IRQ 22
[   13.327057] ppdev: user-space parallel port driver
[   14.111302] Adding 999420k swap on /dev/sda5.  Priority:-2 extents:1 across:999420k FS
[   30.602984] fuse init (API version 7.27)
[  247.939957] kauditd_printk_skb: 9 callbacks suppressed
[  247.939960] audit: type=1400 audit(1650285759.857:21): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.gtkrc-2.0.mine" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[  248.348971] audit: type=1400 audit(1650285760.269:22): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/Os-Catalina-Night/index.theme" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  248.544952] audit: type=1400 audit(1650285760.465:23): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/gnome/index.theme" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  248.647198] audit: type=1400 audit(1650285760.565:24): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/hicolor/index.theme" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  248.679582] audit: type=1400 audit(1650285760.597:25): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  248.680870] audit: type=1400 audit(1650285760.601:26): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  248.682042] audit: type=1400 audit(1650285760.601:27): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  248.682589] audit: type=1400 audit(1650285760.601:28): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  248.686022] audit: type=1400 audit(1650285760.605:29): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  248.686791] audit: type=1400 audit(1650285760.605:30): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  255.605467] kauditd_printk_skb: 882 callbacks suppressed
[  255.605471] audit: type=1400 audit(1650285767.524:913): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/DMZ-White/cursors/left_ptr" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  264.718237] audit: type=1400 audit(1650285776.640:914): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/DMZ-White/cursors/sb_h_double_arrow" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  294.268830] audit: type=1400 audit(1650285806.188:915): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/juan/.local/share/icons/DMZ-White/cursors/watch" pid=1247 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.622993] audit: type=1400 audit(1650286024.552:916): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/Os-Catalina-Night/index.theme" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.623604] audit: type=1400 audit(1650286024.552:917): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/Os-Catalina-Night/index.theme" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.735223] audit: type=1400 audit(1650286024.664:918): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/gnome/index.theme" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.735889] audit: type=1400 audit(1650286024.664:919): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/gnome/index.theme" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.814822] audit: type=1400 audit(1650286024.744:920): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/hicolor/index.theme" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.815411] audit: type=1400 audit(1650286024.744:921): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/hicolor/index.theme" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.831285] audit: type=1400 audit(1650286024.760:922): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.831950] audit: type=1400 audit(1650286024.760:923): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.848920] audit: type=1400 audit(1650286024.780:924): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  512.849542] audit: type=1400 audit(1650286024.780:925): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/juan/.local/share/icons/hicolor/icon-theme.cache" pid=1428 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
juan@debian:~$

Offline

#7 2022-04-18 13:21:25

Bearded_Blunder
Dodging A Bullet
From: Seat: seat0; vc7
Registered: 2015-09-29
Posts: 978

Re: Interference between Caliber and Evince

Maybe look at the permissions on

~/.local/share

And subfolders..
I think the first screenshot shows an error that looks like it translates to permission denied.

That's where I'd be looking first to try to fix it at any rate.

Sometimes such errors arise if sudo was used either copying things there, or to run a GUI application, things you should have access to end up owned by root.
Could be other causes too.

You could probably confirm if it's permissions in your home by creating a new user, logging in as them & seeing if it then works.


Blessed is he who expecteth nothing, for he shall not be disappointed...
If there's an obscure or silly way to break it, but you don't know what.. Just ask me

Offline

#8 2022-04-18 17:37:03

juancuyo
Member
Registered: 2017-11-17
Posts: 66

Re: Interference between Caliber and Evince

Good afternoon, I created a new user as suggested in the forum, log in and went to the home/juan/documentos folder and opened the PDFs with Evince (document viewer), I went back to the user juan and tried to open the same document with Evince , it started to do it but it aborted, not even an image just the wheel on the mouse
How can I solve that? looks like a permissions issue indeed

Offline

#9 2022-04-18 18:43:14

Bearded_Blunder
Dodging A Bullet
From: Seat: seat0; vc7
Registered: 2015-09-29
Posts: 978

Re: Interference between Caliber and Evince

You could try logging in as juan (the broken account) then because of where the errors seem to be referring to, open a terminal & try:

sudo chown -R juan:juan /home/juan/.local

I think that ought to be safe, can't think of anything there the user shouldn't own.. & I doubt you're using Active Directory where that could break things by being the wrong group.  I suspect you've files & possibly folders there that somehow ended up owned by root.


Blessed is he who expecteth nothing, for he shall not be disappointed...
If there's an obscure or silly way to break it, but you don't know what.. Just ask me

Offline

#10 2022-04-19 18:41:56

juancuyo
Member
Registered: 2017-11-17
Posts: 66

Re: Interference between Caliber and Evince

Thank you very much SOLVED, indeed it seems that some files ended up as root property executing the command you gave me in the terminal solved the problem and I can use Evince again Very grateful for your help.

Offline

Board footer

Powered by FluxBB