![[BunsenLabs Logo]](/img/bl.svg)
You are not logged in.
- Topics: Active | Unanswered
#101 2016-01-14 08:40:45
- pvsage
- Internal Affairs
- Registered: 2015-09-29
- Posts: 1,433
Re: What are you working on right now?
Currently working on interactive teacher resources for schools and catalogues and marketing materials for a tool company.
@pvsage Your bike lighting is awesome. I once had a 1960's Lambretta with 6volt lighting and no indicators. I got overtaken whilst I was attempting to turn right (UK). Which didn't end particularly well!
Sorry to hear about that. 
Lambrettas are nice little scooters. (Isn't that what Gregory Peck and Audrey Hepburn rode in Roman Holiday?)
I was holding off on this reply because I wanted to try getting some pictures in a brightly lit parking lot, but the fork lights were still too bright. I'm gonna try again in daylight; after that, I'll have to try dropping the voltage a bit with a battery blank or two.
After six nights or fairly typical use, the batteries were only down one volt, from 10.7V down to 9.7V. There was a slight reduction in headlight brightness, but it was still enough light on the road in front of me to see where I was going, so I'd say this set of lights is done. About 12 hours to charge the batteries (8 batteries, one charger with 4 slots); I now have plenty of data points to make some beautiful lines.
Since the lights are designed to run off of 12V, I suppose I could make a 12V joule thief (obviously the batteries have more than enough mAH for it), which would have the benefit of constant voltage output until the batteries were drained, but really, if the lights are so bright at 10V that they overwhelm my camera...
Be excellent to each other, and...party on, dudes!
BunsenLabs Forum Rules
Tending and defending the Flame since 2009
Offline
#102 2016-01-14 14:57:08
- Horizon_Brave
- Operating System: Linux-Nettrix
- Registered: 2015-10-18
- Posts: 1,473
Re: What are you working on right now?
Currently working on a project for work, involing Redhat Linux and a KVM stack. We have to install a set of VM's that make up a software suite of monitoring tools for the purposes of Fault Management, Configuration, Alarms, and Reporting. Getting through the thick weeds is a mess, so many different IP's, logins, passwords, tunnels, and layers... Fun but a mental challenge!
"I have not failed, I have found 10,000 ways that will not work" -Edison
Offline
#103 2016-01-14 15:00:07
- Irulan
- Guest
Re: What are you working on right now?
Integrating SQLite into my application.
-H
#104 2016-01-14 15:00:33
- damo
- ....moderator....
- Registered: 2015-08-20
- Posts: 6,734
Re: What are you working on right now?
^ @pvsage
What might look really cool is if you cycled past a camera with an open or very slow shutter, and get some fancy light-trails on the image!
Be Excellent to Each Other...
The Bunsenlabs Lithium Desktop » Here
FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt «» BunsenLabs on DeviantArt
Offline
#105 2016-01-14 22:20:52
- pvsage
- Internal Affairs
- Registered: 2015-09-29
- Posts: 1,433
Re: What are you working on right now?
^ Honestly, I've never liked the long-exposure photos of car light trails; they look cheesy to me. Also, I'm not sure I could force my camera to simulate a high enough f-stop to take such a photo; if I could, I'd already have a good clean shot of the lights.
-D'oh! I just fumbled my way to the exposure setting button on my camera. I should have noticed it a lot sooner - has a +/- icon on it - but I'm relatively new to using digital cameras and accustomed to adjusting these things with a dial on the lens.
tl;dr: I should have some decent pics up tonight.
Be excellent to each other, and...party on, dudes!
BunsenLabs Forum Rules
Tending and defending the Flame since 2009
Offline
#106 2016-01-15 07:27:47
- Temetka
- Member
- From: Sol System, Western Spiral Arm
- Registered: 2015-10-14
- Posts: 549
Re: What are you working on right now?
I just finished setting up my Thinkpad X301. It's an older laptop, but I've wanted one for years and I was able to pick up a unit in 9/10 condition. Specs:
13.3" 1400x1050 LED LCD
Core2Duo U9400 ULV CPU @ 1.4GHz
8GB DDR3 RAM
250GB Samsung 850 mSATA SSD
I laid out the partitions thusly:
1. 550MB - Windows Boot
2. 120GB - Windows 10 Enterprise (For work)
3. 100GB - NTFS Data partition to share data between my 2 OS's
4. 16GB - BunsenLabs
5. 800MB - Linux Swap
Linux, especially a light distro such as BL takes up very little space and is easy on the system resources. Right now I have Sublime text open, IceWeasel w// 7 tabs, audacious and a few terminals running and I am using 570MB of RAM.
This machine flies. It feels 90% as fast as my Thinkpad T410 with it's i5 M520 CPU no matter which OS I am booted into. As noted in the parition scheme, I use Windows 10 for work. I wish I didn't have to, but alas I do. I use BL for everything else and there are certain workdays where I don't need the Windows applications and all I need is RDP and SSH. On thosee glorious days I get to linux.
Last edited by Temetka (2016-01-15 07:28:51)
The meaning of life is to just be alive. It is so plain and so obvious
and so simple. And yet everybody rushes aroound in a great panic
as if it were necessary to achieve something beyond themselves.
- Alan Watts
Offline
#107 2016-01-15 22:07:13
- pvsage
- Internal Affairs
- Registered: 2015-09-29
- Posts: 1,433
Re: What are you working on right now?
OK, these were the best pics I could get of my bike last night. I guess I really need a tripod.
Anyway, I consider this the bare minimum illumination for a bike that is ridden at night - at least some light clearly visible from at least 200' from any angle.
Be excellent to each other, and...party on, dudes!
BunsenLabs Forum Rules
Tending and defending the Flame since 2009
Offline
#108 2016-01-19 02:10:51
- KrunchTime
- Member
- Registered: 2015-09-29
- Posts: 857
Re: What are you working on right now?
Re-installing Windows 8 in VirtualBox on my desktop and laptop. I decided to go back to VirtualBox after a few months of using VMware Player.
Offline
#109 2016-01-19 07:29:38
- Head_on_a_Stick
- Member
- From: London
- Registered: 2015-09-29
- Posts: 9,065
- Website
Re: What are you working on right now?
I decided to go back to VirtualBox after a few months of using VMware Player.
What made you decide?
I've never tried VMware Player, is it any good?
I like the KVM support in version 5 of VirtualBox -- my BLVM just flies 
EDIT: Ooops, off-topic :8
Last edited by Head_on_a_Stick (2016-01-19 07:31:16)
Offline
#110 2016-01-20 01:30:23
- KrunchTime
- Member
- Registered: 2015-09-29
- Posts: 857
Re: What are you working on right now?
KrunchTime wrote:I decided to go back to VirtualBox after a few months of using VMware Player.
What made you decide?
I've never tried VMware Player, is it any good?
I like the KVM support in version 5 of VirtualBox -- my BLVM just flies
EDIT: Ooops, off-topic :8
Not really off topic IMO; are we now so anal that you can't ask a question in response to a post? 
In general, yes VMware Player was good. I liked the fact that you could copy and paste files between host and guest systems, something that VirtualBox doesn't seem to allow, atleast for a Linux host and a Windows guest. It's useful if shared folders breaks, which has happened to me under VirtualBox.
Using USB peripherals under VMware Player was a dream, unlike VirtualBox. In VirtualBox you have to know the USB ID of the device you want to use and enter that within the VM settings. VMware Player was a true plug and play experience in this regard. I didn't have to enter anything for a USB device to work.
One issue some have with VMware Player is that it doesn't have a snapshot feature, but you can work around that by just backing up the whole folder containing all of the particular VM files. I never encountered an issue rolling back using a backup of the VM folder.
Anyway back to why I switched. I had BL installed in a VM under VMware Player and it would crash within seconds after logging on. This began after a recent upgrade; 12.0.0 I believe and then again with 12.1.0. I've been thinking that perhaps I forgot to install dkms, but it did work for quite awhile before the updates without crashing.
What pushed me over the cliff was that the upgrade to 12.1.0 somehow broke something with peripheral use because my scanner would no longer scan. I got some kind of error message about not being able to communicate with the scanner. I even re-installed the scanner driver, but no go.
To be fair, I've encountered similar issues with peripherals under VirtualBox. However, VirtualBox is mostly open source, so I decided to go back to it. I've also came to the conclusion that it's best not to update VM software just for the sake of upgrading, especially when everything works. In the future, for the most part, I'll only upgrade for security issues.
Edit: Another thing that I didn't like about using VMware Player was registering to access their forums. They wanted all kinds of personal info, presumably for marketing purposes, and I wasn't willing to provide the info, so I couldn't ask questions. The tech support personnel and some forum members also ask for a log file whenever you encounter errors. I looked through that file and felt that there was too much info about my system for me to comfortably hand over to strangers.
Last edited by KrunchTime (2016-01-20 08:01:34)
Offline
#111 2016-01-20 07:28:45
- Head_on_a_Stick
- Member
- From: London
- Registered: 2015-09-29
- Posts: 9,065
- Website
Re: What are you working on right now?
^ Very interesting, thanks! 
Offline
#112 2016-01-20 07:57:13
- KrunchTime
- Member
- Registered: 2015-09-29
- Posts: 857
Re: What are you working on right now?
^ You're very welcome. 
Offline
#113 2016-01-20 18:58:11
- pingu
- Member
- Registered: 2015-09-29
- Posts: 128
Re: What are you working on right now?
a pacman in C i've been working on as an exercise.. I grew quite fond of it over the past few days, its like my own chaotic ant farm 
I've left it playing by it self itself with 100000 lives and it ran out without segfaulting, so that's a win for me :8
I've had a lot of trouble with getting malloc and relloc correct, but I think I finally got it right, so I haven't changed it to talloc as nobody suggested after all.
if anybody wants to blow up their computer you can get it here: 
https://github.com/genoob/likepacman
I need to add some color now (as easy as ncurses is, i havent ffigured out how to color a single character and decided to "leave it for later.."); it's really hard to find the hero in the swarm of ghosts.
Last edited by pingu (2016-01-20 18:58:50)
"Chuck Norris can compile syntax errors."
Offline
#114 2016-01-20 19:00:38
- Head_on_a_Stick
- Member
- From: London
- Registered: 2015-09-29
- Posts: 9,065
- Website
Re: What are you working on right now?
Trying not to freeze my ass off doing 300 mile days mostly on the motorway at temperatures just above freezing on a motorcycle with no fairing.
Brrr...
Offline
#115 2016-01-20 21:39:25
- Head_on_a_Stick
- Member
- From: London
- Registered: 2015-09-29
- Posts: 9,065
- Website
Re: What are you working on right now?
[1] 1627 segmentation fault (core dumped) ./pacmann
BTW, you have a typo in your README.md -- it should be:
gcc pacman.c map.c -o pacman -lncursesYour README has "maps.c"
EDIT: removed second "n"; I used that to avoid conflict with pacman(8)
Last edited by Head_on_a_Stick (2016-01-20 21:50:36)
Offline
#116 2016-01-22 23:34:53
- pingu
- Member
- Registered: 2015-09-29
- Posts: 128
Re: What are you working on right now?
thanks ^^ I corrected it.
Did the compiler show any warnings?
As for that segfault though, I have no idea... if you didnt' have ncurses library I think the compiler would complain. maybe I made some crappy push... 8: I gotta start using those branches.
I've only tested this on 2 gentoos and 1 mac... mac segfaulted obviously, but I had to try.
and arch users should call it something else or rename the package manager
I have just pushed again.. and with colorz!
finally learned how to get the colors in. I had to realize that I needed to make color pairs, even if the background color was default..
edit: if it still segfaults, strace it please. maybe I'll learn something today. Also, I have tried this on a mac btw, it compiled fine with their ncurses and gcc, but it also segfaults. I didnt' care about debugging though. "It's a mac, it's never gonna work" I thought...
edit2: try passing -std=gnu99 to gcc too .
Last edited by pingu (2016-01-22 23:46:06)
"Chuck Norris can compile syntax errors."
Offline
#117 2016-01-22 23:47:59
- Head_on_a_Stick
- Member
- From: London
- Registered: 2015-09-29
- Posts: 9,065
- Website
Re: What are you working on right now?
Just `git pull`ed the new version, same result:
empty@Arch ~/git/likepacman (git)-[master] % strace ./pacman
execve("./pacman", ["./pacman"], [/* 38 vars */]) = 0
brk(0) = 0x1e1f000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=109677, ...}) = 0
mmap(NULL, 109677, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe49e647000
close(3) = 0
open("/usr/lib/libncursesw.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260u\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=444680, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe49e646000
mmap(NULL, 2542224, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe49e1d4000
mprotect(0x7fe49e23b000, 2097152, PROT_NONE) = 0
mmap(0x7fe49e43b000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x67000) = 0x7fe49e43b000
close(3) = 0
open("/usr/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000\7\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1991416, ...}) = 0
mmap(NULL, 3815984, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe49de30000
mprotect(0x7fe49dfcb000, 2093056, PROT_NONE) = 0
mmap(0x7fe49e1ca000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19a000) = 0x7fe49e1ca000
mmap(0x7fe49e1d0000, 14896, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe49e1d0000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe49e645000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe49e644000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe49e643000
arch_prctl(ARCH_SET_FS, 0x7fe49e644700) = 0
mprotect(0x7fe49e1ca000, 16384, PROT_READ) = 0
mprotect(0x7fe49e43b000, 16384, PROT_READ) = 0
mprotect(0x7fe49e662000, 4096, PROT_READ) = 0
munmap(0x7fe49e647000, 109677) = 0
brk(0) = 0x1e1f000
brk(0x1e40000) = 0x1e40000
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
stat("/home/empty/.terminfo", 0x1e1f7d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/terminfo", {st_mode=S_IFDIR|0755, st_size=84, ...}) = 0
access("/usr/share/terminfo/r/rxvt-unicode-256color", R_OK) = 0
open("/usr/share/terminfo/r/rxvt-unicode-256color", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=2234, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe49e661000
read(3, "\32\1N\0\35\0\37\0p\1$\5rxvt-unicode-256colo"..., 4096) = 2234
read(3, "", 4096) = 0
close(3) = 0
munmap(0x7fe49e661000, 4096) = 0
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, TIOCGWINSZ, {ws_row=75, ws_col=273, ws_xpixel=1911, ws_ypixel=1050}) = 0
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, TIOCGWINSZ, {ws_row=75, ws_col=273, ws_xpixel=1911, ws_ypixel=1050}) = 0
brk(0x1e62000) = 0x1e62000
brk(0x1e84000) = 0x1e84000
brk(0x1ea5000) = 0x1ea5000
brk(0x1ec7000) = 0x1ec7000
brk(0x1ee9000) = 0x1ee9000
brk(0x1f0b000) = 0x1f0b000
brk(0x1f2d000) = 0x1f2d000
brk(0x1f4e000) = 0x1f4e000
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
brk(0x1f70000) = 0x1f70000
brk(0x1f92000) = 0x1f92000
brk(0x1fb4000) = 0x1fb4000
brk(0x1fd5000) = 0x1fd5000
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon echo ...}) = 0
ioctl(1, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon -echo ...}) = 0
rt_sigaction(SIGTSTP, NULL, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTSTP, {0x7fe49e1fe300, [], SA_RESTORER|SA_RESTART, 0x7fe49de63680}, NULL, 8) = 0
rt_sigaction(SIGINT, NULL, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGINT, {0x7fe49e1fe210, [], SA_RESTORER|SA_RESTART, 0x7fe49de63680}, NULL, 8) = 0
rt_sigaction(SIGTERM, NULL, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTERM, {0x7fe49e1fe210, [], SA_RESTORER|SA_RESTART, 0x7fe49de63680}, NULL, 8) = 0
rt_sigaction(SIGWINCH, NULL, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGWINCH, {0x7fe49e1fe200, [], SA_RESTORER, 0x7fe49de63680}, NULL, 8) = 0
ioctl(1, TCGETS, {B38400 opost isig -icanon -echo ...}) = 0
mmap(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe49e622000
fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 2), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe49e661000
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x1} ---
+++ killed by SIGSEGV (core dumped) +++
[1] 1383 segmentation fault (core dumped) strace ./pacman
% I can't get a backtrace without recompiling stuff with the debugging symbols, sorry.
Offline
#118 2016-01-22 23:54:19
- Head_on_a_Stick
- Member
- From: London
- Registered: 2015-09-29
- Posts: 9,065
- Website
Re: What are you working on right now?
edit2: try passing -std=gnu99 to gcc too .
No joy
empty@Arch ~/git/likepacman (git)-[master] % strace ./pacman
execve("./pacman", ["./pacman"], [/* 38 vars */]) = 0
brk(0) = 0x1c07000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=109677, ...}) = 0
mmap(NULL, 109677, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f2489eef000
close(3) = 0
open("/usr/lib/libncursesw.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260u\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=444680, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f2489eee000
mmap(NULL, 2542224, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f2489a7c000
mprotect(0x7f2489ae3000, 2097152, PROT_NONE) = 0
mmap(0x7f2489ce3000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x67000) = 0x7f2489ce3000
close(3) = 0
open("/usr/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000\7\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1991416, ...}) = 0
mmap(NULL, 3815984, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f24896d8000
mprotect(0x7f2489873000, 2093056, PROT_NONE) = 0
mmap(0x7f2489a72000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19a000) = 0x7f2489a72000
mmap(0x7f2489a78000, 14896, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f2489a78000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f2489eed000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f2489eec000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f2489eeb000
arch_prctl(ARCH_SET_FS, 0x7f2489eec700) = 0
mprotect(0x7f2489a72000, 16384, PROT_READ) = 0
mprotect(0x7f2489ce3000, 16384, PROT_READ) = 0
mprotect(0x7f2489f0a000, 4096, PROT_READ) = 0
munmap(0x7f2489eef000, 109677) = 0
brk(0) = 0x1c07000
brk(0x1c28000) = 0x1c28000
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
stat("/home/empty/.terminfo", 0x1c077d0) = -1 ENOENT (No such file or directory)
stat("/usr/share/terminfo", {st_mode=S_IFDIR|0755, st_size=84, ...}) = 0
access("/usr/share/terminfo/r/rxvt-unicode-256color", R_OK) = 0
open("/usr/share/terminfo/r/rxvt-unicode-256color", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=2234, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f2489f09000
read(3, "\32\1N\0\35\0\37\0p\1$\5rxvt-unicode-256colo"..., 4096) = 2234
read(3, "", 4096) = 0
close(3) = 0
munmap(0x7f2489f09000, 4096) = 0
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, TIOCGWINSZ, {ws_row=75, ws_col=136, ws_xpixel=952, ws_ypixel=1050}) = 0
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, TIOCGWINSZ, {ws_row=75, ws_col=136, ws_xpixel=952, ws_ypixel=1050}) = 0
brk(0x1c49000) = 0x1c49000
brk(0x1c6a000) = 0x1c6a000
brk(0x1c8b000) = 0x1c8b000
brk(0x1cac000) = 0x1cac000
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
brk(0x1ccd000) = 0x1ccd000
brk(0x1cee000) = 0x1cee000
ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
ioctl(1, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon echo ...}) = 0
ioctl(1, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon -echo ...}) = 0
rt_sigaction(SIGTSTP, NULL, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTSTP, {0x7f2489aa6300, [], SA_RESTORER|SA_RESTART, 0x7f248970b680}, NULL, 8) = 0
rt_sigaction(SIGINT, NULL, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGINT, {0x7f2489aa6210, [], SA_RESTORER|SA_RESTART, 0x7f248970b680}, NULL, 8) = 0
rt_sigaction(SIGTERM, NULL, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGTERM, {0x7f2489aa6210, [], SA_RESTORER|SA_RESTART, 0x7f248970b680}, NULL, 8) = 0
rt_sigaction(SIGWINCH, NULL, {SIG_DFL, [], 0}, 8) = 0
rt_sigaction(SIGWINCH, {0x7f2489aa6200, [], SA_RESTORER, 0x7f248970b680}, NULL, 8) = 0
ioctl(1, TCGETS, {B38400 opost isig -icanon -echo ...}) = 0
mmap(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f2489eca000
fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f2489f09000
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
write(1, "\n", 1
) = 1
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0xfffffff8ff805601} ---
+++ killed by SIGSEGV (core dumped) +++
[1] 1588 segmentation fault (core dumped) strace ./pacman
%EDIT: no errors when compiling.
Last edited by Head_on_a_Stick (2016-01-23 00:06:28)
Offline
#119 2016-01-23 00:12:36
- pingu
- Member
- Registered: 2015-09-29
- Posts: 128
Re: What are you working on right now?
HUm.. no idea still.. at least I was able to replicate when I chrooted into my arch system. it does the same thing... with same trace. I guess I have some work to do now 8)
edit: and thanks for trying to run it!
edit: the same happend on debian.. .. two times sad
Last edited by pingu (2016-01-23 00:27:07)
"Chuck Norris can compile syntax errors."
Offline
#120 2016-01-23 02:08:27
- Irulan
- Guest
Re: What are you working on right now?
Digging the car out of the ice
-H