You are not logged in.

#1126 2019-07-12 16:17:48

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Show us your conky

@ragamatrix - and anyone else interested.

BIG CLOCK with just fonts.  ;)
2019-07-12_121023_Scrot11.th.jpg

The code:
Above TEXT I am using (conky v1.9 - you will need to convert):

xftfont Fira Mono:bold:size=12

you can use any font here, it's NOT used in the clocks part of the conky at all.
and:

draw_shades yes
default_shade_color 000000
${font Fantasque Sans Mono:bold:size=40}${color5}${alignc}${time %a %d %b %Y}${color}${font}
${alignc}${color}${if_match ${time %H}<12}Good Morning${else}\
${if_match ${time %H}<18}${color7}Good Afternoon${else}${color3}Good Evening${endif}${endif}${color}
${goto 40}${font LED_mono:size=100}${color1}88:88:88${goto 40}${color5}${time %T}${color}${font}



${alignc}${color}${if_match ${time %H}<12}Good Morning${else}\
${if_match ${time %H}<18}${color7}Good Afternoon${else}${color3}Good Evening${endif}${endif}${color}
${font SF Digital Readout:size=75}\
${color1}${goto 155}xx:xx:xx${goto 155}ii:ii:ii${goto 155}88:88:88${color}\
${color5}${goto 155}${time %T}${color}\

${color1}${goto 30}xxx xx xxx xxxx${goto 30}iii ii iii iiii${goto 30}888 88 888 8888${color}\
${color}${goto 30}${time %a %d %b %Y}${color}\
${font}

Fonts:
LED_mono:

  • does just numbers and the " : "

  • it does NOT do spaces either

  • You could do ${time %a:%d:%b:%Y} or ${time %a:%d:%b:%y} if you wanted, which I have done in another conky

    • someplace in the haystack of conkys I have

SF Digital Readout

  • trust me the x and i are needed for: Fri and Wed Mon

  • tried: bold - one comment: YUK!

Last edited by Sector11 (2019-07-12 16:21:02)


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1127 2019-07-13 07:26:06

unklar
Member
Registered: 2015-10-31
Posts: 895

Re: Show us your conky

Sector11 wrote:

... and anyone else interested.

on behalf of the interested, thanks for the code.   cool

Offline

#1128 2019-07-13 07:35:43

unklar
Member
Registered: 2015-10-31
Posts: 895

Re: Show us your conky

@loutch

Did you?  In the curr_cond there is briefly no information about the air pressure and the Conky then looks like this.

2019-07-13-09-32-00_scrot.th.png

Offline

#1129 2019-07-13 09:00:15

loutch
Member
Registered: 2015-12-12
Posts: 313

Re: Show us your conky

unklar wrote:

@loutch

Did you?  In the curr_cond there is briefly no information about the air pressure and the Conky then looks like this.

https://cdn.scrot.moe/images/2019/07/13/2019-07-13-09-32-00_scrot.th.png


yes it happens from time to time when the conky  run before accuweather has finished executing his script

Last edited by loutch (2019-07-13 09:04:36)


Linuxmint 19.1 Tessa cinnamon & mageia 7 mate on ssd hp pavilion g7
Xubuntu 18.04 lts & 19.04 xfce on ASUS Rog STRIX

Offline

#1130 2019-07-13 10:31:59

ragamatrix
Member
Registered: 2015-10-04
Posts: 371

Re: Show us your conky

@Sector11 It's beautifull Thanks a lot! I'll play with it when I'll come back! Summer Holidays  cool

Offline

#1131 2019-07-13 15:10:06

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Show us your conky

unklar wrote:
Sector11 wrote:

... and anyone else interested.

on behalf of the interested, thanks for the code.   cool

You are very welcome my friend.
Du bist herzlich willkommen mein Freund. (Well, GUGL says that's right.)


ragamatrix wrote:

@Sector11 It's beautifull Thanks a lot! I'll play with it when I'll come back! Summer Holidays  cool

Have a GREAT holiday my friend.
Passez de super vacances mon ami.


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1132 2019-07-13 17:39:53

MrEd
Member
Registered: 2018-06-26
Posts: 27

Re: Show us your conky

For anyone that likes big clocks

conky-ednix
A nixie clock by MrEd 2019
No mystical scripts done with sorcery with this one, but there was a little photoshop trickey haha
Comes with 3 backgrounds, no background, and with small setting adjustment, no shadowbox background
uses NixieOne.ttf font

MMbheu8.png
NrgJUHZ.png
VrLtxBX.png
tKjBuOa.png
E8V2wab.png


Stock setting should run this on your main monitor
camFebX.jpg

Download
https://www.dropbox.com/s/4cqwiglg9hqnu … x.zip?dl=0

If you prefer it with day moved, here is the code
   

${alignc}${voffset -162}${color6}${font Nixie One:bold:size=12}Day - ${time %j}${font}${voffset} #Day of the year

22jrJAU.png

Last edited by MrEd (2019-07-13 17:51:15)


MSI B85M-G43 * Dualcore 3.3GHz *-12GB ram * GT740 4GB video * Logitech USB-Marble Mouse=Trackball * System - ArchLinux-Antergos, KDE Plasma Desktop - Conky 1.10

Offline

#1133 2019-07-13 19:42:25

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Show us your conky

MrEd wrote:

A nixie clock by MrEd 2019

Nice one.  Can't get though, no dropbox.
Why not put images at scrot.moe and put conky code here?


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1134 2019-07-13 19:50:05

damo
....moderator....
Registered: 2015-08-20
Posts: 5,008

Re: Show us your conky

Sector11 wrote:

...
Nice one.  Can't get though, no dropbox.
...

Anyone can download from a Dropbox link, if it has a public share - you don't need to install DB.

Also you could try

wget https://www.dropbox.com/s/4cqwiglg9hqnu1z/conky-ednix.zip

Be Excellent to Each Other...

FORUM RULES and posting guidelines «» Help page for forum post formatting
Artwork on DeviantArt  «» BunsenLabs on DeviantArt

Offline

#1135 2019-07-13 19:57:01

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Show us your conky

Totally missed that ... must be getting old(er)!

TY damo


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1136 2019-07-13 21:08:33

unklar
Member
Registered: 2015-10-31
Posts: 895

Re: Show us your conky

Thanks @MrEd, works fine.    smile

Screenshot_20190713_230302.th.png

Offline

#1137 2019-07-14 05:55:50

MrEd
Member
Registered: 2018-06-26
Posts: 27

Re: Show us your conky

As far as not posting the code, you know, I didn't really give it much thought.

I guess that's what this section is for, but you get into habits in other forums about don't do this, don't do that...see the rules...[edits rant] grrrrr, lol

Last edited by MrEd (2019-07-14 06:50:13)


MSI B85M-G43 * Dualcore 3.3GHz *-12GB ram * GT740 4GB video * Logitech USB-Marble Mouse=Trackball * System - ArchLinux-Antergos, KDE Plasma Desktop - Conky 1.10

Offline

#1138 2019-07-15 08:31:19

loutch
Member
Registered: 2015-12-12
Posts: 313

Re: Show us your conky

unklar wrote:

https://cdn.scrot.moe/images/2019/02/17/2019-02-16-21-05-31_scrot.th.png https://cdn.scrot.moe/images/2019/02/17/2019-02-16-21-11-14_scrot.th.png

^ then it was quite simple   wink

- at first, I had found what I was looking for in an Italian ubuntu forum. These configuration files (audio_spectrum.lua  .etc) are not sufficient. Finally I found the complete archive of @wlourf here.

In the README it is excellently explained.
- finally, the libraries impulse.so and libimpulse.so throws a
32CLASS error

Traceback (most recent call last):
  File "impulse.py", line 11, in <module>
    import  impulse
ImportError: /home/unklar/.conky/radiotray/audio_spectrum1.2/impulse.so: wrong ELF class: ELFCLASS32

and you have to use the ones in the package
impulse-0.5.5-screenlet-x86_64.tar.gz
(impulse-0.5.5-screenlet-x86.tar.gz is for 32bit machines)

Many thanks to @loutch and @ragamatrix for your ideas.   big_smile

Hello

Would it be possible to get your conky along with the scripts

Danke


Linuxmint 19.1 Tessa cinnamon & mageia 7 mate on ssd hp pavilion g7
Xubuntu 18.04 lts & 19.04 xfce on ASUS Rog STRIX

Offline

#1139 2019-07-15 16:47:55

MaDscntist
Member
Registered: 2019-02-22
Posts: 11

Re: Show us your conky

Hi i want to know where he's getting this stuff from? can help weather @unklar @Sector11 @ragamatrix   

Thank you

https://forums.bunsenlabs.org/viewtopic … 916#p68916

${offset 115}${voffset -3}Gust: ${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather wind_gust}

Offline

#1140 2019-07-15 18:47:18

unklar
Member
Registered: 2015-10-31
Posts: 895

Re: Show us your conky

loutch wrote:

Hello

Would it be possible to get your conky along with the scripts

Danke

@loutch, mon ami, sers-toi.  big_smile

2019-07-14-22-23-43_scrot.th.png

Attention, this is conky version 1.9

Last edited by unklar (2019-07-17 08:01:10)

Offline

#1141 2019-07-15 19:00:42

unklar
Member
Registered: 2015-10-31
Posts: 895

Re: Show us your conky

MaDscntist wrote:

Hi i want to know where he's getting this stuff from? can help weather @unklar @Sector11 @ragamatrix

I don't know if I understand you correctly, but it's in the head of the script...

manuel-909 wrote:

conkyWeather:

#!/bin/bash
# adapted from conkycolors by quakeguy
# --- http://weather.yahoo.com/ ---
# http://weather.yahooapis.com/forecastrss?w=WOEID&u=UNIT
# WOEID: Halle - 656853
# UNIT: c - Celsius, f - Fahrenheit
# (old id: Halle - GMXX0048)

# changed to weather.com
# since  03/2016 yahoo requires oauth2

....

Offline

#1142 2019-07-15 19:25:57

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Show us your conky

HEEEEY  MrEd ... You know I just had to try that "tube clock thingy" of yours!

So I hopped on my trusty wagon with my best buddy and went to a nice quiet place I know of to work on it.

OH MY!!!!!  WE WERE NOT ALONE!
2019-07-15_144359_Scrot11.th.jpg
But he turned out to be quite friendly and helpful.

Well, the first thing I run into is:

15 Jul 19 @ 11:44:11 ~
   $ conky -c /media/5/Conky/MrEd_Tube-Time.conky &
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
     pkill -xf "conky -c /media/5/Conky/MrEd_Tube-Time.conky"
[3] 30679

 15 Jul 19 @ 11:44:12 ~
   $ Conky: received SIGINT or SIGTERM to terminate. bye!

New friend says: "Strip the profiles, strip the profiles!"

So I humour him and strip the profiles.

 15 Jul 19 @ 11:54:47 /media/5/Conky/images
   $ convert mred-nixie-noback.png -strip MrEd-tube-time.png

HEY, not bad ... all good.  Thank you new friend.  BTW, he wasn't frm mars either, he was there looking for some rare mineral "KJti" or some such thing.

And since the supplied font is not a mono font the numbers seemed to 'shift' a bit in the tubes.
... time for a mono font.  Enter:

xftfont Digital dream:size=40

And I see how I can streamline things under TEXT a bit soooo a tweak here, remove that, change this, tweak that, OOPS! more tweaking over there and I come up with:

TEXT
${image /media/5/Conky/images/MrEd-tube-time_500.png -p 00,00}\
${image /media/5/Conky/images/MrEd-tube-time_500.png -p 1390,00}\
${voffset 75}${color2}${goto 75}${execpi 10  date +%H |cut -c 1}\
${goto 169}${execpi 10 date +%H |cut -c 2}\
${goto 242}:\
${goto 315}${execpi 10 date +%M |cut -c 1}\
${goto 410}${execpi 10 date +%M |cut -c 2}\
${goto 1465}${pre_exec date +%d |cut -c 1}\
${goto 1560}${pre_exec date +%d |cut -c 2}\
${goto 1632}|\
${goto 1706}${pre_exec date +%m |cut -c 1}\
${goto 1801}${pre_exec date +%m |cut -c 2}${color}

Rather than resize the image in the conky (uses a tiny bit of CPU resources), I resized the image to: 500x196 and then set conky's "height as 500" and a width of 1920, since my monitor is 1920 wide.

Also I don't mind if the hours and minutes are 10 seconds off.  big_smile

WARNING: Conky v1.10 does not have the "pre_exec" command; use: "execpi 86400"

EDIT:  Error in the scrot it shows Day | Year not Day Month | Code fixed.

Last edited by Sector11 (2019-07-15 19:30:24)


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1143 2019-07-15 19:51:26

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Show us your conky

Now knowing that those ol radio, tv and whatever else vacuum tubes can be used for come in all sorts of sizes from short and thin, short and fat to tall and thin and tall and fat I went looking for some new ones.  And found some that were made for the base MrEd supplied ... soooooooooooo.

SO WHY NOT!!!  Here's the time with day and month on that set of tubes that I found in the back room.
2019-07-15_164631_Scrot11.th.jpg

And the code of interest.

${image /media/5/Conky/images/MrEd-tube-time-date_500.png -p 00,00}\
${voffset 60}${color2}${goto 75}${execpi 10  date +%H |cut -c 1}\
${goto 169}${execpi 10 date +%H |cut -c 2}\
${goto 242}:\
${goto 315}${execpi 10 date +%M |cut -c 1}\
${goto 410}${execpi 10 date +%M |cut -c 2}
${color 222222}${goto 75}H${goto 169}R${goto 315}M${goto 410}I
${color 222222}${goto 75}D${goto 169}A${goto 315}M${goto 410}O
${color2}${goto 75}${pre_exec date +%d |cut -c 1}\
${goto 169}${pre_exec date +%d |cut -c 2}\
${goto 242}|\
${goto 315}${pre_exec date +%m |cut -c 1}\
${goto 410}${pre_exec date +%m |cut -c 2}${color}

Conky's height and width set to the same size as the image: 500x500


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1144 2019-07-15 21:49:15

grzegorzdabrowka
Member
Registered: 2016-01-03
Posts: 16
Website

Re: Show us your conky

${execpi 100 date +%A}

${execpi 100 date +%A |cut -c1}\
${execpi 100 date +%A |cut -c2}\
${execpi 100 date +%A |cut -c3}\
${execpi 100 date +%A |cut -c4}

${execpi 100 date +%A |cut -c 1-2}

${execpi 100 date +%A |cut -c 1-3}

:-)

Offline

#1145 2019-07-15 22:24:39

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Show us your conky

grzegorzdabrowka wrote:
${execpi 100 date +%A}

${execpi 100 date +%A |cut -c1}\
${execpi 100 date +%A |cut -c2}\
${execpi 100 date +%A |cut -c3}\
${execpi 100 date +%A |cut -c4}

${execpi 100 date +%A |cut -c 1-2}

${execpi 100 date +%A |cut -c 1-3}

:-)

Or the conky command:

${time %a} = Mon
${time %A} = Monday

No ${exec(pi) ...}  needed

Conky: ${time %?} or ${time %? %? %?}

Time
====
%H 	Two digit representation of the hour in 24-hour format 	00 through 23
%I 	Two digit representation of the hour in 12-hour format 	01 through 12
%l   (lower-case 'L') Hour in 12-hour format, with a space preceeding single digits 1 through 12

%M 	Two digit representation of the minute 	00 through 59

%p 	UPPER-CASE 'AM' or 'PM' based on the given time 	Example: AM for 00:31, PM for 22:23
%P 	lower-case 'am' or 'pm' based on the given time 	Example: am for 00:31, pm for 22:23

%r 	Same as "%I:%M:%S %p" 	Example: 09:34:17 PM for 21:34:17
%R 	Same as "%H:%M" 	Example: 00:35 for 12:35 AM, 16:44 for 4:44 PM
%S 	Two digit representation of the second 	00 through 59
%T 	Same as "%H:%M:%S" 	Example: 21:34:17 for 09:34:17 PM
-------
%X 	Preferred time representation based on locale, without the date 	Example: 03:59:16 or 15:59:16
-------
%z 	Either the time zone offset from UTC or the abbreviation (depends on operating system) 	Example: -0500 or EST for Eastern Time
%Z 	The time zone offset/abbreviation option NOT given by %z (depends on operating system) 	Example: -0500 or EST for Eastern Time

Day
===
%a 	An abbreviated textual representation of the day 	Sun through Sat
%A 	A full textual representation of the day 	Sunday through Saturday
%d 	Two-digit day of the month (with leading zeros) 	01 to 31
%e 	Day of the month, with a space preceding single digits 	1 to 31
%j 	Day of the year, 3 digits with leading zeros 	001 to 366
%u 	ISO-8601 numeric representation of the day of the week 	1 (for Monday) though 7 (for Sunday)
%w 	Numeric representation of the day of the week 	0 (for Sunday) through 6 (for Saturday)

Month
=====
%b 	Abbreviated month name, based on the locale 	Jan through Dec
%B 	Full month name, based on the locale 	January through December
%h 	Abbreviated month name, based on the locale (an alias of %b) 	Jan through Dec
%m 	Two digit representation of the month (with leading zeros) 	01 to 12

Year
====
%g 	Two digit representation of the year going by ISO-8601:1988 standards (see Week: %V) 	Example: 09 for the week of January 6, 2009
%G 	The full four-digit version of %g 	Example: 2008 for the week of January 3, 2009
%y 	Two digit representation of the year 	Example: 09 for 2009, 79 for 1979
%Y 	Four digit representation for the year 	Example: 2038

Century
=======
%C 	Two digit representation of the century (year divided by 100, truncated to an integer) 	19 for the 20th

Week
====
%U 	Week number of the given year, starting with the first Sunday as the first week 13 (for the 13th full week of the year)
%V 	ISO-8601:1988 week number of the given year, starting with the first week of the year with at least 4 weekdays, with Monday being the start of the week
 	01 through 53 (where 53 accounts for an overlapping week)
%W 	A numeric representation of the week of the year, starting with the first Monday as the first week
 	46 (for the 46th week of the year beginning with a Monday)

Time and Date Stamps
====================
%c 	Preferred date and time stamp based on local 	Example: Tue Feb 5 00:45:10 2009 for February 4, 2009 at 12:45:10 AM
%D 	Same as "%m/%d/%y" 	Example: 02/05/09 for February 5, 2009
%F 	Same as "%Y-%m-%d" (commonly used in database datestamps) 	Example: 2009-02-05 for February 5, 2009
%s 	Unix Epoch Time timestamp (same as the time() function) 	Example: 305815200 for September 10, 1979 08:40:00 AM
%x 	Preferred date representation based on locale, without the time 	Example: 02/05/09 for February 5, 2009

Miscellaneous
=============
%n 	A newline character ("\n") 	---
%t 	A Tab character ("\t") 	---
%% 	A literal percentage character ("%") 	---

Maximum length of this parameter is 1023 characters.

BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1146 2019-07-16 00:34:01

MaDscntist
Member
Registered: 2019-02-22
Posts: 11

Re: Show us your conky

unklar wrote:
MaDscntist wrote:

Hi i want to know where he's getting this stuff from? can help weather @unklar @Sector11 @ragamatrix

I don't know if I understand you correctly, but it's in the head of the script...

manuel-909 wrote:

conkyWeather:

#!/bin/bash
# adapted from conkycolors by quakeguy
# --- http://weather.yahoo.com/ ---
# http://weather.yahooapis.com/forecastrss?w=WOEID&u=UNIT
# WOEID: Halle - 656853
# UNIT: c - Celsius, f - Fahrenheit
# (old id: Halle - GMXX0048)

# changed to weather.com
# since  03/2016 yahoo requires oauth2

....

~/conky-conf/testing/weather-a/scripts/conkyWeather wind_gust}  conkyWeather wind_gust

conkyWeather wind_gust  these right here these images? How do i get them in todays world i thought conky weather was no more?

Offline

#1147 2019-07-16 00:48:20

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Show us your conky

MaDscntist wrote:

conkyWeather wind_gust  these right here these images? How do i get them in todays world i thought conky weather was no more?

Try any of Teo's scripts

Weather still alive ...
2019-07-15_214719_Scrot11.th.jpg


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1148 2019-07-16 01:07:53

MaDscntist
Member
Registered: 2019-02-22
Posts: 11

Re: Show us your conky

Sector11 wrote:
MaDscntist wrote:

conkyWeather wind_gust  these right here these images? How do i get them in todays world i thought conky weather was no more?

Try any of Teo's scripts

Weather still alive ...
https://cdn.scrot.moe/images/2019/07/16/2019-07-15_214719_Scrot11.th.jpg

I want that one weather I listed @Sector11 "But there no way of knowing where hje got those images"

Offline

#1149 2019-07-16 01:45:32

Sector11
The Tpyo Knig Mod
From: 77345 ¡#
Registered: 2015-08-20
Posts: 5,453

Re: Show us your conky

MaDscntist wrote:
Sector11 wrote:
MaDscntist wrote:

conkyWeather wind_gust  these right here these images? How do i get them in todays world i thought conky weather was no more?

Try any of Teo's scripts

Weather still alive ...
https://cdn.scrot.moe/images/2019/07/16/2019-07-15_214719_Scrot11.th.jpg

I want that one weather I listed @Sector11 "But there no way of knowing where hje got those images"

Well, here's the post.  It's over a year old, may or may not work.  Things change, but it is all right there.


BunsenLabs Forum Rules ---== I'm a Conky 1.9'er ==---
System:    Host: d67 Kernel: 4.9.0-9-amd64 x86_64 (64 bit gcc: 6.3.0)
Desktop: Openbox 3.6.1 Distro: Debian GNU/Linux 9 (stretch)

Offline

#1150 2019-07-16 02:32:28

MaDscntist
Member
Registered: 2019-02-22
Posts: 11

Re: Show us your conky

Sector11 wrote:
MaDscntist wrote:

I want that one weather I listed @Sector11 "But there no way of knowing where hje got those images"

Well, here's the post.  It's over a year old, may or may not work.  Things change, but it is all right there.

Where do find all this stuff?  Not all here?

/weather-a/scripts/conkyWeather pressure}
/weather-a/scripts/conkyWeather atmosphere_humidity}
~/conky-conf/testing/weather-a/scripts/cache/weather.xml
/weather-a/scripts/conkyWeather uv_index


${execi 600 ~/conky-conf/testing/weather-a/scripts/lua-weather.sh 4787519}
${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather GET}
${offset 120}${voffset -9}±${color7}${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather Feels_Like}${font}°${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather unit_temperature}
${offset 115}${voffset -3}Gust: ${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather wind_gust}
${offset 190}${voffset -65}H/L: ${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather forecast1_high} | ${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather forecast1_low}°${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather unit_temperature}${alignr}${color7}Humidity: ${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather atmosphere_humidity}
${offset 200}${voffset 90}${if_gw}${color7}${font ConkyColorsWeather:size=40}${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather condition_code}${font}
${offset 10}${voffset -10}DP: ${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather dew_point}°${alignc -40}UV Index: ${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather uv_index}${alignr}Pressure: ${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather pressure} ${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather pressure_d}
  ${color3}${execi 600 (cat ~/conky-conf/testing/weather-a/scripts/cache/weather.xml | sed '/<day d="1"/,1!d' | sed 's/.* t="\(.*\)" .*/\1/')}: ${color7}${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather forecast2_high} / ${color7}${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather forecast2_low}°${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather unit_temperature} \
 |  ${execi 600 grep -A 2 -Pm2 '(?<=<part p="d")[^<]+' ~/conky-conf/testing/weather-a/scripts/cache/weather.xml | sed -n '7p' | grep -oPm2 '(?<=<t>)[^<]+'}  |  \
wind ${execi 600 grep -oPm4 "(?<=<s>)[^<]+" ~/conky-conf/testing/weather-a/scripts/cache/weather.xml | sed -n '4p'} mph \
${execi 600 grep -A 8 -Pm2 '(?<=<part p="d")[^<]+' ~/conky-conf/testing/weather-a/scripts/cache/weather.xml | sed -n '18p' | grep -oPm1 '(?<=<t>)[^<]+'} \
${alignr 20}${voffset -5}${color8}${font ConkyColorsWeather:size=20}${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather forecast2_code}${font}
  ${voffset -10}${color3}${execi 600 (cat ~/conky-conf/testing/weather-a/scripts/cache/weather.xml | sed '/<day d="2"/,1!d' | sed 's/.* t="\(.*\)" .*/\1/')}: ${color7}${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather forecast3_high} / ${color7}${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather forecast3_low}°${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather unit_temperature} \
 |  ${execi 600 grep -A 8 -Pm3 '(?<=<day d="2")[^<]+' ~/conky-conf/testing/weather-a/scripts/cache/weather.xml | sed -n '9p' | grep -oPm3 '(?<=<t>)[^<]+'}  |  wind \
${execi 600 grep -A 10 -Pm3 '(?<=<day d="2")[^<]+' ~/conky-conf/testing/weather-a/scripts/cache/weather.xml | sed -n '11p' | grep -oPm3 '(?<=<s>)[^<]+'} mph \
${execi 600 grep -A 13 -Pm3 '(?<=<day d="2")[^<]+' ~/conky-conf/testing/weather-a/scripts/cache/weather.xml | sed -n '14p' | grep -oPm3 '(?<=<t>)[^<]+'} \
${alignr}${voffset -7}${color8}${font ConkyColorsWeather:size=20}${execi 600 ~/conky-conf/testing/weather-a/scripts/conkyWeather forecast3_code}${font}
#${voffset -50}
]];

Offline

Board footer

Powered by FluxBB