You are not logged in.

#1 2016-07-27 15:10:00

malix
New Member
Registered: 2016-06-29
Posts: 3

[SOLVED] Thinkpad x230 'enable wi-fi' greyed out

Today my wlan0 suddenly disabled. Enable Wi-Fi was greyed out.

Menu_002.png

hym@localhost:~$ sudo rfkill list all
0: tpacpi_bluetooth_sw: Bluetooth
	Soft blocked: no
	Hard blocked: yes
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: yes

Fn + F5 seems not working, have no idea how to release wireless LAN hard blocked.

Need help

dmesg
[    0.000000] CPU0 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2+deb8u3 (2016-07-02)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/caredoc--vg-lv_broot ro initrd=/install/initrd.gz quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d067ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d0680000-0x00000000dae9efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 0.7 present.
[    0.000000] DMI: LENOVO 2333A52/2333A52, BIOS G2ET33WW (1.13 ) 07/24/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask E00000000 write-back
[    0.000000]   8 base 400000000 mask FE0000000 write-back
[    0.000000]   9 base 41F000000 mask FFF000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xd0680 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41e400000-0x41e5fffff]
[    0.000000]  [mem 0x41e400000-0x41e5fffff] page 2M
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41c000000-0x41e3fffff]
[    0.000000]  [mem 0x41c000000-0x41e3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[    0.000000]  [mem 0x400000000-0x41bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xd067ffff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xd05fffff] page 2M
[    0.000000]  [mem 0xd0600000-0xd067ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x357cc000-0x36bddfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DAFFE170 0000BC (v01 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: FACP 0x00000000DAFE5000 0000F4 (v04 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000DAFE8000 0102C8 (v01 LENOVO TP-G2    00001130 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000DAF5A000 000040
[    0.000000] ACPI: FACS 0x00000000DAF5A000 000040
[    0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G2    00001130 PTL  00000001)
[    0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFFB000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[    0.000000] ACPI: HPET 0x00000000DAFE4000 000038 (v01 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000DAFE3000 000098 (v01 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000DAFE2000 00003C (v01 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: ECDT 0x00000000DAFE1000 000052 (v01 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: FPDT 0x00000000DAFE0000 000054 (v01 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: ASF! 0x00000000DAFE7000 0000A5 (v32 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: POAT 0x00000000DAFDD000 000055 (v03 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000DAFDC000 000C79 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFDB000 000A7E (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: DMAR 0x00000000DAFDA000 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: UEFI 0x00000000DAFD9000 0002A6 (v01 LENOVO TP-G2    00001130 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x41e5fffff]
[    0.000000]   NODE_DATA [mem 0x41e5ec000-0x41e5f0fff]
[    0.000000]  [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040de00000-ffff88041bdfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x41e5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xd067ffff]
[    0.000000]   node   0: [mem 0x100000000-0x41e5fffff]
[    0.000000] On node 0 totalpages: 4123163
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11608 pages used for memmap
[    0.000000]   DMA32 zone: 849023 pages, LIFO batch:31
[    0.000000]   Normal zone: 44709 pages used for memmap
[    0.000000]   Normal zone: 3270144 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0680000-0xdae9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041e200000 s80896 r8192 d21504 u262144
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4066769
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/caredoc--vg-lv_broot ro initrd=/install/initrd.gz quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16164148K/16492652K available (5220K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 328504K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2594.048 MHz processor
[    0.000066] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.09 BogoMIPS (lpj=10376192)
[    0.000070] pid_max: default: 32768 minimum: 301
[    0.000084] ACPI: Core revision 20140424
[    0.024870] ACPI: All ACPI Tables successfully acquired
[    0.024921] Security Framework initialized
[    0.024933] AppArmor: AppArmor disabled by boot time parameter
[    0.024935] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.026753] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.034823] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.038457] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.038491] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.038946] Initializing cgroup subsys memory
[    0.038954] Initializing cgroup subsys devices
[    0.038966] Initializing cgroup subsys freezer
[    0.038971] Initializing cgroup subsys net_cls
[    0.038978] Initializing cgroup subsys blkio
[    0.038984] Initializing cgroup subsys perf_event
[    0.038988] Initializing cgroup subsys net_prio
[    0.039029] CPU: Physical Processor ID: 0
[    0.039031] CPU: Processor Core ID: 0
[    0.039039] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.039802] mce: CPU supports 7 MCE banks
[    0.039821] CPU0: Thermal monitoring enabled (TM1)
[    0.039831] process: using mwait in idle threads
[    0.039838] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[    0.040049] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.043178] ftrace: allocating 21683 entries in 85 pages
[    0.060791] dmar: Host address width 36
[    0.060796] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.060807] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.060809] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.060817] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.060819] dmar: RMRR base: 0x000000da2f0000 end: 0x000000da306fff
[    0.060821] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.060900] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.060902] HPET id 0 under DRHD base 0xfed91000
[    0.060904] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.061180] Enabled IRQ remapping in x2apic mode
[    0.061183] Enabling x2apic
[    0.061185] Enabled x2apic
[    0.061195] Switched APIC routing to cluster x2apic.
[    0.061710] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.101422] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (fam: 06, model: 3a, stepping: 09)
[    0.101438] TSC deadline timer enabled
[    0.101485] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.101522] ... version:                3
[    0.101524] ... bit width:              48
[    0.101525] ... generic registers:      4
[    0.101527] ... value mask:             0000ffffffffffff
[    0.101529] ... max period:             0000ffffffffffff
[    0.101531] ... fixed-purpose events:   3
[    0.101532] ... event mask:             000000070000000f
[    0.104251] x86: Booting SMP configuration:
[    0.104255] .... node  #0, CPUs:      #1
[    0.118445] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.118621]  #2
[    0.129740] CPU2 microcode updated early to revision 0x1c, date = 2015-02-26
[    0.132857]  #3
[    0.146742] x86: Booted up 1 node, 4 CPUs
[    0.146747] smpboot: Total of 4 processors activated (20752.38 BogoMIPS)
[    0.152583] devtmpfs: initialized
[    0.160835] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[    0.162549] pinctrl core: initialized pinctrl subsystem
[    0.162684] NET: Registered protocol family 16
[    0.162899] cpuidle: using governor ladder
[    0.162905] cpuidle: using governor menu
[    0.162984] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.162987] ACPI: bus type PCI registered
[    0.162989] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.163314] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.163318] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.163479] PCI: Using configuration type 1 for base access
[    0.177030] ACPI: Added _OSI(Module Device)
[    0.177034] ACPI: Added _OSI(Processor Device)
[    0.177036] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.177038] ACPI: Added _OSI(Processor Aggregator Device)
[    0.179598] ACPI : EC: EC description table is found, configuring boot EC
[    0.187298] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.239414] ACPI: Dynamic OEM Table Load:
[    0.239436] ACPI: SSDT 0xFFFF88040D7B1000 000A01 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.256753] ACPI: Dynamic OEM Table Load:
[    0.256769] ACPI: SSDT 0xFFFF88040D7BF000 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.268536] ACPI: Dynamic OEM Table Load:
[    0.268551] ACPI: SSDT 0xFFFF88040D633E00 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.285543] ACPI: Interpreter enabled
[    0.285554] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.285562] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.285586] ACPI: (supports S0 S3 S4 S5)
[    0.285589] ACPI: Using IOAPIC for interrupt routing
[    0.285630] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.299131] ACPI: Power Resource [PUBS] (on)
[    0.299858] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.301645] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.305087] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[    0.305877] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.306030] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
[    0.306181] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11)
[    0.306330] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
[    0.306477] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.306634] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11)
[    0.306782] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[    0.306928] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.307086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.307093] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.307309] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.307404] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.307409] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.307412] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.307415] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.307706] PCI host bridge to bus 0000:00
[    0.307711] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.307715] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.307718] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.307721] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.307724] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
[    0.307727] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[    0.307741] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.307890] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.307910] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.307920] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.307928] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.308109] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.308152] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
[    0.308291] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.308347] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.308434] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.308481] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
[    0.308622] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.308747] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[    0.308780] pci 0000:00:16.3: reg 0x10: [io  0x50b0-0x50b7]
[    0.308795] pci 0000:00:16.3: reg 0x14: [mem 0xf253c000-0xf253cfff]
[    0.309046] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.309080] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[    0.309096] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
[    0.309113] pci 0000:00:19.0: reg 0x18: [io  0x5080-0x509f]
[    0.309245] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.309304] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.309392] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.309429] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
[    0.309596] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.309651] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.309739] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.309769] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
[    0.309924] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.309994] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.310074] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.310237] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.310373] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.310530] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.310673] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.310835] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.310897] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.310993] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.311030] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
[    0.311199] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.311257] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.311334] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.311615] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.311657] pci 0000:00:1f.2: reg 0x10: [io  0x50a8-0x50af]
[    0.311674] pci 0000:00:1f.2: reg 0x14: [io  0x50bc-0x50bf]
[    0.311690] pci 0000:00:1f.2: reg 0x18: [io  0x50a0-0x50a7]
[    0.311707] pci 0000:00:1f.2: reg 0x1c: [io  0x50b8-0x50bb]
[    0.311725] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.311740] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
[    0.311845] pci 0000:00:1f.2: PME# supported from D3hot
[    0.311968] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.311999] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
[    0.312044] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.312381] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
[    0.312407] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[    0.312438] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
[    0.312672] pci 0000:02:00.0: supports D1 D2
[    0.312675] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.322700] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.322708] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.322715] pci 0000:00:1c.0:   bridge window [mem 0xf1d00000-0xf24fffff]
[    0.322727] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.323097] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[    0.323459] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
[    0.325211] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.334715] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.334728] pci 0000:00:1c.1:   bridge window [mem 0xf1c00000-0xf1cfffff]
[    0.334897] acpiphp: Slot [1] registered
[    0.334910] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[    0.334919] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.334926] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.334937] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.336511] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.336633] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.336810] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.336813] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.336818] vgaarb: loaded
[    0.336820] vgaarb: bridge control possible 0000:00:02.0
[    0.336931] PCI: Using ACPI for IRQ routing
[    0.340668] PCI: pci_cache_line_size set to 64 bytes
[    0.341118] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.341121] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.341123] e820: reserve RAM buffer [mem 0xd0680000-0xd3ffffff]
[    0.341126] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[    0.341364] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.341373] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.343423] Switched to clocksource hpet
[    0.352154] pnp: PnP ACPI init
[    0.352175] ACPI: bus type PNP registered
[    0.352910] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.352915] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.352918] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.352922] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.352925] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.352928] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.352931] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.352935] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.352938] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.352941] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.352945] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.352948] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.352951] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.352955] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.352958] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.352962] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.352966] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.352971] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.353123] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[    0.353168] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.353171] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.353175] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.353178] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.353181] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.353186] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.353189] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[    0.353193] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.353196] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.353200] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.353203] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.353207] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.353211] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.353320] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.353375] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.353432] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[    0.353519] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.354183] pnp: PnP ACPI: found 6 devices
[    0.354188] ACPI: bus type PNP unregistered
[    0.362386] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.362396] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.362406] pci 0000:00:1c.0:   bridge window [mem 0xf1d00000-0xf24fffff]
[    0.362413] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.362425] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.362434] pci 0000:00:1c.1:   bridge window [mem 0xf1c00000-0xf1cfffff]
[    0.362449] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[    0.362453] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.362463] pci 0000:00:1c.2:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.362470] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.362483] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.362486] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.362489] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.362492] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[    0.362495] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[    0.362498] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.362501] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
[    0.362504] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.362507] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
[    0.362511] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.362514] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
[    0.362517] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.362624] NET: Registered protocol family 2
[    0.363134] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.363598] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.363785] TCP: Hash tables configured (established 131072 bind 65536)
[    0.363817] TCP: reno registered
[    0.363849] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.363952] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.364143] NET: Registered protocol family 1
[    0.364172] pci 0000:00:02.0: Video device with shadowed ROM
[    0.364981] PCI: CLS 64 bytes, default 64
[    0.365070] Unpacking initramfs...
[    1.014047] Freeing initrd memory: 20552K (ffff8800357cc000 - ffff880036bde000)
[    1.014182] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.014186] software IO TLB [mem 0xcc680000-0xd0680000] (64MB) mapped at [ffff8800cc680000-ffff8800d067ffff]
[    1.014641] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.014721] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c
[    1.014735] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c
[    1.014743] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c
[    1.014757] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c
[    1.014853] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.015428] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.015499] audit: initializing netlink subsys (disabled)
[    1.015530] audit: type=2000 audit(1469620877.004:1): initialized
[    1.016283] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.016322] zbud: loaded
[    1.016684] VFS: Disk quotas dquot_6.5.2
[    1.016715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.016812] msgmni has been set to 31610
[    1.017344] alg: No test for stdrng (krng)
[    1.017397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.017480] io scheduler noop registered
[    1.017484] io scheduler deadline registered
[    1.017555] io scheduler cfq registered (default)
[    1.018284] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.018314] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.018353] intel_idle: MWAIT substates: 0x21120
[    1.018355] intel_idle: v0.4 model 0x3A
[    1.018357] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.018714] GHES: HEST is not enabled!
[    1.018824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.039813] 0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19, base_baud = 115200) is a 16550A
[    1.040086] Linux agpgart interface v0.103
[    1.040285] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.041986] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.041994] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.042203] mousedev: PS/2 mouse device common for all mice
[    1.042282] rtc_cmos 00:02: RTC can wake from S4
[    1.042492] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.042536] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.042561] Intel P-state driver initializing.
[    1.042610] Intel pstate controlling: cpu 0
[    1.042674] Intel pstate controlling: cpu 1
[    1.042706] Intel pstate controlling: cpu 2
[    1.042743] Intel pstate controlling: cpu 3
[    1.042801] ledtrig-cpu: registered to indicate activity on CPUs
[    1.043640] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.043821] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    1.043823] AMD IOMMUv2 functionality not available on this system
[    1.044001] TCP: cubic registered
[    1.044143] NET: Registered protocol family 10
[    1.044527] mip6: Mobile IPv6
[    1.044537] NET: Registered protocol family 17
[    1.044550] mpls_gso: MPLS GSO support
[    1.045088] registered taskstats version 1
[    1.045889] rtc_cmos 00:02: setting system clock to 2016-07-27 12:01:17 UTC (1469620877)
[    1.046042] PM: Hibernation image not present or could not be loaded.
[    1.047270] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    1.047272] Write protecting the kernel read-only data: 8192k
[    1.047921] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[    1.048312] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    1.059834] systemd-udevd[71]: starting version 215
[    1.060139] random: systemd-udevd urandom read with 6 bits of entropy available
[    1.074808] pps_core: LinuxPPS API ver. 1 registered
[    1.074810] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.075054] PTP clock support registered
[    1.075703] ACPI: bus type USB registered
[    1.075732] usbcore: registered new interface driver usbfs
[    1.075745] usbcore: registered new interface driver hub
[    1.076021] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.076023] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    1.076192] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.076225] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    1.076493] sdhci: Secure Digital Host Controller Interface driver
[    1.076495] sdhci: Copyright(c) Pierre Ossman
[    1.076861] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[    1.077267] mmc0: no vqmmc regulator found
[    1.077269] mmc0: no vmmc regulator found
[    1.077525] SCSI subsystem initialized
[    1.078750] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[    1.078799] usbcore: registered new device driver usb
[    1.079328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.079468] ehci-pci: EHCI PCI platform driver
[    1.080897] thermal LNXTHERM:00: registered as thermal_zone0
[    1.080899] ACPI: Thermal Zone [THM0] (59 C)
[    1.083959] libata version 3.00 loaded.
[    1.277145] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.277153] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:33:04:96
[    1.277157] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.277206] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.277405] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.277415] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.277441] ehci-pci 0000:00:1a.0: debug port 2
[    1.281351] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.281362] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
[    1.292115] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.292170] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.292173] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.292175] usb usb1: Product: EHCI Host Controller
[    1.292177] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.292179] usb usb1: SerialNumber: 0000:00:1a.0
[    1.292505] hub 1-0:1.0: USB hub found
[    1.292521] hub 1-0:1.0: 3 ports detected
[    1.292851] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.292859] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.292878] ehci-pci 0000:00:1d.0: debug port 2
[    1.296802] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.296823] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
[    1.308160] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.308247] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.308249] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.308252] usb usb2: Product: EHCI Host Controller
[    1.308253] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.308255] usb usb2: SerialNumber: 0000:00:1d.0
[    1.308626] hub 2-0:1.0: USB hub found
[    1.308647] hub 2-0:1.0: 3 ports detected
[    1.309111] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.309123] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.310236] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.310272] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[    1.310709] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.310713] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.310715] usb usb3: Product: xHCI Host Controller
[    1.310717] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.310718] usb usb3: SerialNumber: 0000:00:14.0
[    1.310956] hub 3-0:1.0: USB hub found
[    1.310981] hub 3-0:1.0: 4 ports detected
[    1.311454] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.311457] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.311601] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.311602] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.311603] usb usb4: Product: xHCI Host Controller
[    1.311604] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.311605] usb usb4: SerialNumber: 0000:00:14.0
[    1.311703] hub 4-0:1.0: USB hub found
[    1.311718] hub 4-0:1.0: 4 ports detected
[    1.311883] usb: failed to peer usb4-port2 and usb3-port1 by location (usb4-port2:none) (usb3-port1:usb4-port1)
[    1.311886] usb usb4-port2: failed to peer to usb3-port1 (-16)
[    1.311886] usb: port power management may be unreliable
[    1.311947] usb: failed to peer usb4-port3 and usb3-port1 by location (usb4-port3:none) (usb3-port1:usb4-port1)
[    1.311948] usb usb4-port3: failed to peer to usb3-port1 (-16)
[    1.312009] usb: failed to peer usb4-port4 and usb3-port1 by location (usb4-port4:none) (usb3-port1:usb4-port1)
[    1.312010] usb usb4-port4: failed to peer to usb3-port1 (-16)
[    1.312123] ahci 0000:00:1f.2: version 3.0
[    1.312225] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.312252] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.328092] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    1.328095] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    1.344623] scsi0 : ahci
[    1.344824] scsi1 : ahci
[    1.344950] scsi2 : ahci
[    1.345086] scsi3 : ahci
[    1.345211] scsi4 : ahci
[    1.345324] scsi5 : ahci
[    1.345387] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 44
[    1.345389] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 44
[    1.345390] ata3: DUMMY
[    1.345391] ata4: DUMMY
[    1.345393] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 44
[    1.345394] ata6: DUMMY
[    1.604317] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.664407] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.675699] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.675707] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.685669] ata1.00: ATA-9: INTEL SSDSC2BW180A3L, LE1i, max UDMA/133
[    1.685676] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.695676] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.695683] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.705666] ata1.00: configured for UDMA/133
[    1.706026] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW18 LE1i PQ: 0 ANSI: 5
[    1.737375] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.737381] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.737917] hub 1-1:1.0: USB hub found
[    1.738252] hub 1-1:1.0: 6 ports detected
[    1.852519] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.867900] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[    1.899649] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[    1.961057] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
[    1.961081] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    1.985063] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.985069] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.985526] hub 2-1:1.0: USB hub found
[    1.985659] hub 2-1:1.0: 8 ports detected
[    2.000036] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.012576] tsc: Refined TSC clocksource calibration: 2594.114 MHz
[    2.024645] ata2: SATA link down (SStatus 0 SControl 300)
[    2.060630] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[    2.161570] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[    2.161576] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.161579] usb 1-1.6: Product: Integrated Camera
[    2.161582] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.352861] ata5: SATA link down (SStatus 0 SControl 300)
[    2.358345] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
[    2.358444] sd 0:0:0:0: [sda] Write Protect is off
[    2.358448] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.358468] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.360337]  sda: sda1 sda2 < sda5 >
[    2.360975] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.361762] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.400245] device-mapper: uevent: version 1.0.3
[    2.400394] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.496851] raid6: sse2x1    4737 MB/s
[    2.564884] raid6: sse2x2    7769 MB/s
[    2.632930] raid6: sse2x4   11343 MB/s
[    2.632931] raid6: using algorithm sse2x4 (11343 MB/s)
[    2.632932] raid6: using ssse3x2 recovery algorithm
[    2.633162] xor: automatically using best checksumming function:
[    2.672954]    avx       : 24770.000 MB/sec
[    2.675627] Btrfs loaded
[    2.711011] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    2.813011] fuse init (API version 7.23)
[    2.835605] systemd-udevd[209]: starting version 215
[    2.885284] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    2.885933] ACPI: Lid Switch [LID]
[    2.885992] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    2.885996] ACPI: Sleep Button [SLPB]
[    2.886055] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    2.886057] ACPI: Power Button [PWRF]
[    2.888414] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.889017] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[    2.894892] [drm] Initialized drm 1.1.0 20060810
[    2.896523] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[    2.896843] Non-volatile memory driver v1.3
[    2.900633] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    2.900636] thinkpad_acpi: [url]http://ibm-acpi.sf.net/[/url]
[    2.900637] thinkpad_acpi: ThinkPad BIOS G2ET33WW (1.13 ), EC unknown
[    2.900639] thinkpad_acpi: Lenovo ThinkPad X230, model 2333A52
[    2.901230] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[    2.904286] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    2.904417] wmi: Mapper loaded
[    2.905056] [drm] Memory usable by graphics device = 2048M
[    2.905059] [drm] Replacing VGA console driver
[    2.906544] ACPI: Battery Slot [BAT0] (battery present)
[    2.906736] Console: switching to colour dummy device 80x25
[    2.906833] ACPI: AC Adapter [AC] (off-line)
[    2.906969] thinkpad_acpi: radio switch found; radios are disabled
[    2.907072] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    2.907072] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    2.909391] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[    2.909880] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    2.910432] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    2.912752] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    2.917412] cfg80211: Calling CRDA to update world regulatory domain
[    2.919716] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[    2.922019] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    2.922021] Copyright(c) 2003- 2014 Intel Corporation
[    2.922213] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.922403] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X
[    2.929172] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[    2.929185] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.929187] [drm] Driver supports precise vblank timestamp query.
[    2.929266] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.930558] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.930561] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.930564] sound hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[    2.930565] sound hdaudioC0D0:    mono: mono_out=0x0
[    2.930567] sound hdaudioC0D0:    inputs:
[    2.930569] sound hdaudioC0D0:      Mic=0x18
[    2.930571] sound hdaudioC0D0:      Dock Mic=0x19
[    2.930573] sound hdaudioC0D0:      Internal Mic=0x12
[    2.930997] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    2.934678] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[    2.934838] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    2.937290] AVX version of gcm_enc/dec engaged.
[    2.943916] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[    2.944272] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.944342] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.944408] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.944472] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    2.944540] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    2.944620] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    2.944691] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    2.947087] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    2.953121] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    2.953124] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    2.953126] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    2.953128] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    2.953495] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    2.958116] alg: No test for crc32 (crc32-pclmul)
[    2.960314] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[    2.965449] tpm_tis 00:05: TPM is disabled/deactivated (0x6)
[    2.979802] intel_rapl: Found RAPL domain package
[    2.979806] intel_rapl: Found RAPL domain core
[    2.979808] intel_rapl: Found RAPL domain uncore
[    2.979815] intel_rapl: RAPL package 0 domain package locked by BIOS
[    2.983528] media: Linux media interface: v0.10
[    2.984463] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    2.986211] Linux video capture interface: v2.00
[    2.992850] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[    2.995354] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input17
[    2.995423] usbcore: registered new interface driver uvcvideo
[    2.995425] USB Video Class driver (1.1.1)
[    3.013265] Switched to clocksource tsc
[    3.028959] cfg80211: World regulatory domain updated:
[    3.028962] cfg80211:  DFS Master region: unset
[    3.028963] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    3.028965] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    3.028966] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    3.028967] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    3.028969] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    3.028970] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    3.028971] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    3.028972] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    3.028973] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    3.053218] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    3.070759] fbcon: inteldrmfb (fb0) is primary device
[    3.352818] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    3.352819] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[    3.814444] Console: switching to colour frame buffer device 170x48
[    3.819036] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.819039] i915 0000:00:02.0: registered panic notifier
[    3.870464] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    3.895621] acpi device:00: registered as cooling_device5
[    3.895805] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18
[    3.896186] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.896573] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    3.896772] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB_.PCI0.LPC_.PMIO) (20140424/utaddress-254)
[    3.896784] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.896794] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-254)
[    3.896803] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.896806] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-254)
[    3.896814] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.896817] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20140424/utaddress-254)
[    3.896825] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.896829] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.902250] iTCO_vendor_support: vendor-support=0
[    3.902774] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.902843] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    3.902943] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.963762] Adding 5242876k swap on /dev/mapper/caredoc--vg-lv_swap.  Priority:-1 extents:1 across:5242876k SSFS
[    3.991799] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    3.998922] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[    3.999022] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[    4.012344] systemd-journald[210]: Received request to flush runtime journal from PID 1
[    4.383965] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    4.486339] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[    4.486638] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.490504] random: nonblocking pool is initialized
[    4.790631] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    4.865892] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    6.156606] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    6.354845] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    7.089981] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    7.089991] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[    7.090038] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.364468] Bluetooth: Core ver 2.19
[   11.364580] NET: Registered protocol family 31
[   11.364582] Bluetooth: HCI device and connection manager initialized
[   11.364590] Bluetooth: HCI socket layer initialized
[   11.364592] Bluetooth: L2CAP socket layer initialized
[   11.364601] Bluetooth: SCO socket layer initialized
[   11.367760] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.367763] Bluetooth: BNEP filters: protocol multicast
[   11.367769] Bluetooth: BNEP socket layer initialized
[   11.495116] Bluetooth: RFCOMM TTY layer initialized
[   11.495125] Bluetooth: RFCOMM socket layer initialized
[   11.495130] Bluetooth: RFCOMM ver 1.11
[   12.047381] vboxdrv: Found 4 processor cores.
[   12.048522] vboxdrv: fAsync=0 offMin=0x417 offMax=0x42e5
[   12.048979] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   12.048983] vboxdrv: Successfully loaded version 4.3.36_Debian (interface 0x001a000b).
[   12.072824] vboxpci: IOMMU not found (not registered)
[   81.208700] e1000e: eth0 NIC Link is Down
[   81.337075] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   81.440737] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   81.440958] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   81.764999] e1000e: eth0 NIC Link is Down
[   81.900026] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   82.001194] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[   82.001515] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   84.604884] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   84.604894] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[   84.604942] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  229.617866] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[  229.748311] usb 3-2: New USB device found, idVendor=0718, idProduct=0085
[  229.748318] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  229.748321] usb 3-2: Product: Flash Drive
[  229.748324] usb 3-2: Manufacturer: Imation
[  229.748326] usb 3-2: SerialNumber: 7142fa371aa299
[  229.771401] usb-storage 3-2:1.0: USB Mass Storage device detected
[  229.771521] scsi6 : usb-storage 3-2:1.0
[  229.771674] usbcore: registered new interface driver usb-storage
[  230.771497] scsi 6:0:0:0: Direct-Access     Imation  Flash Drive      1.20 PQ: 0 ANSI: 2
[  230.772172] sd 6:0:0:0: Attached scsi generic sg1 type 0
[  230.772605] sd 6:0:0:0: [sdb] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
[  230.773122] sd 6:0:0:0: [sdb] Write Protect is off
[  230.773129] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  230.773638] sd 6:0:0:0: [sdb] Asking for cache data failed
[  230.773643] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  230.910840]  sdb: sdb1
[  231.046035] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  270.693225] e1000e: eth0 NIC Link is Down
[  273.428856] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  273.428865] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[  304.823316] e1000e: eth0 NIC Link is Down
[  304.824061] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  304.831962] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  307.123539] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  307.224854] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[  307.225205] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  309.828561] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  309.828572] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[  309.828620] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  706.330310] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  706.330697] FAT-fs (sdb1): bogus number of reserved sectors
[  706.330700] FAT-fs (sdb1): Can't find a valid FAT filesystem
[  711.706486] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  711.706872] FAT-fs (sdb1): bogus number of reserved sectors
[  711.706875] FAT-fs (sdb1): Can't find a valid FAT filesystem
[  716.802711] usb 3-2: USB disconnect, device number 2
[  720.571736] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[  720.701982] usb 3-2: New USB device found, idVendor=0718, idProduct=0085
[  720.701993] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  720.701998] usb 3-2: Product: Flash Drive
[  720.702003] usb 3-2: Manufacturer: Imation
[  720.702007] usb 3-2: SerialNumber: 7142fa371aa299
[  720.702504] usb-storage 3-2:1.0: USB Mass Storage device detected
[  720.702731] scsi7 : usb-storage 3-2:1.0
[  721.701486] scsi 7:0:0:0: Direct-Access     Imation  Flash Drive      1.20 PQ: 0 ANSI: 2
[  721.702741] sd 7:0:0:0: [sdb] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
[  721.702872] sd 7:0:0:0: Attached scsi generic sg1 type 0
[  721.703248] sd 7:0:0:0: [sdb] Write Protect is off
[  721.703253] sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
[  721.703818] sd 7:0:0:0: [sdb] Asking for cache data failed
[  721.703825] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[  721.838551]  sdb: sdb1
[  721.973820] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[  725.600886] ISO 9660 Extensions: Microsoft Joliet Level 3
[  725.603792] ISO 9660 Extensions: RRIP_1991A
[ 4746.716450] thinkpad_acpi: EC reports that Thermal Table has changed
[ 5618.026832] usb 3-2: USB disconnect, device number 3
[ 5619.690090] usb 3-2: new high-speed USB device number 4 using xhci_hcd
[ 5619.818910] usb 3-2: New USB device found, idVendor=0718, idProduct=0085
[ 5619.818914] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5619.818917] usb 3-2: Product: Flash Drive
[ 5619.818918] usb 3-2: Manufacturer: Imation
[ 5619.818920] usb 3-2: SerialNumber: 7142fa371aa299
[ 5619.819254] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 5619.819398] scsi8 : usb-storage 3-2:1.0
[ 5620.819340] scsi 8:0:0:0: Direct-Access     Imation  Flash Drive      1.20 PQ: 0 ANSI: 2
[ 5620.819879] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 5620.820408] sd 8:0:0:0: [sdb] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
[ 5620.820574] sd 8:0:0:0: [sdb] Write Protect is off
[ 5620.820580] sd 8:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 5620.820747] sd 8:0:0:0: [sdb] Asking for cache data failed
[ 5620.820753] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 5620.955061]  sdb: sdb1
[ 5620.956496] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 5621.250771] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5621.251423] ISO 9660 Extensions: RRIP_1991A
[10490.734505] perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

---Mod Edit: Please use [ code ] tags for terminal output, not [ quote ] wink ---

Last edited by damo (2016-07-27 15:48:59)

Offline

#2 2016-07-27 15:14:49

twoion
ほやほや
Registered: 2015-08-10
Posts: 2,932

Re: [SOLVED] Thinkpad x230 'enable wi-fi' greyed out

The WLAN interface is marked as hard-blocked. That means disabled by a physical hardware switch. The x230 has a physical wireless radio switch on its left side. Turn the switch on and thinks should work again.

foo.png


Per aspera ad astra.

Offline

#3 2016-07-27 15:19:37

malix
New Member
Registered: 2016-06-29
Posts: 3

Re: [SOLVED] Thinkpad x230 'enable wi-fi' greyed out

haha, d*mn, you're right! big_smile

I was suspecting hardware issue, all went well until today morning its suddenly greyed out.

Thanks in advance

Last edited by malix (2016-07-27 15:21:15)

Offline

#4 2016-07-27 16:52:35

Horizon_Brave
Operating System: Linux-Nettrix
Registered: 2015-10-18
Posts: 1,473

Re: [SOLVED] Thinkpad x230 'enable wi-fi' greyed out

You know.. more and more I see less reason and more frustration of actually putting a physical switch on the outside perimeter of a laptop. The laptop I use for work, has a button for on/off wifi, but it's only pressable if you open the lid... Plus it only works when you're powered on. So it drastically, drastically reduces the chances of this happened....

tl;dr   physical, outside radio switches are dumb.


"I have not failed, I have found 10,000 ways that will not work" -Edison

Offline

#5 2016-07-27 21:42:05

hhh
Meep!
Registered: 2015-09-17
Posts: 10,474
Website

Re: [SOLVED] Thinkpad x230 'enable wi-fi' greyed out

[SOLVED]

Offline

Board footer

Powered by FluxBB