Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

unklar · 2020-05-01 10:27:27

Under BL-Lithium (Buster) are installed here:

inkscape                      0.92.4-3

imagemagick                   8:6.9.10.23+dfsg-2.1
imagemagick-6.q16             8:6.9.10.23+dfsg-2.1
imagemagick-6-common          8:6.9.10.23+dfsg-2.1

libmagick++-6.q16-8           8:6.9.10.23+dfsg-2.1
libmagickcore-6.q16-6-extra   8:6.9.10.23+dfsg-2.1
libmagickwand-6.q16-6         8:6.9.10.23+dfsg-2.1
libmagickcore-6.q16-6         8:6.9.10.23+dfsg-2.1

Images are displayed correctly.
It is therefore important to find out after which uninstallation of packages the error occurs again. 8o

unklar · 2020-05-01 12:50:55

So, as in siduction, I first purged inkscape and removed all other "dependencies" with autoremove.

 sudo apt purge inkscape
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
  libcdr-0.1-1 libgsl23 libgslcblas0 libgtkspell0 libimage-magick-perl libimage-magick-q16-perl libmagick++-6.q16-8 libmicrodns0 libpotrace0 libvisio-0.1-1
  python-backports.functools-lru-cache python-bs4 python-html5lib python-lxml python-scour python-soupsieve python-webencodings python3-scour scour
Verwenden Sie »sudo apt autoremove«, um sie zu entfernen.
Die folgenden Pakete werden ENTFERNT:
  inkscape*
0 aktualisiert, 0 neu installiert, 1 zu entfernen und 0 nicht aktualisiert.
Nach dieser Operation werden 80,4 MB Plattenplatz freigegeben.
Möchten Sie fortfahren? [J/n] 
(Lese Datenbank ... 159405 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von inkscape (0.92.4-3) ...
Trigger für mime-support (3.62) werden verarbeitet ...
Trigger für hicolor-icon-theme (0.17-2) werden verarbeitet ...
Trigger für man-db (2.8.5-2) werden verarbeitet ...
Trigger für desktop-file-utils (0.23-4) werden verarbeitet ...
(Lese Datenbank ... 158558 Dateien und Verzeichnisse sind derzeit installiert.)
Löschen der Konfigurationsdateien von inkscape (0.92.4-3) ...

sudo apt autoremove
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete werden ENTFERNT:
  libcdr-0.1-1 libgsl23 libgslcblas0 libgtkspell0 libimage-magick-perl libimage-magick-q16-perl libmagick++-6.q16-8 libmicrodns0 libpotrace0 libvisio-0.1-1
  python-backports.functools-lru-cache python-bs4 python-html5lib python-lxml python-scour python-soupsieve python-webencodings python3-scour scour
0 aktualisiert, 0 neu installiert, 19 zu entfernen und 0 nicht aktualisiert.
Nach dieser Operation werden 12,3 MB Plattenplatz freigegeben.
Möchten Sie fortfahren? [J/n] 
(Lese Datenbank ... 158558 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von libcdr-0.1-1:amd64 (0.1.5-1) ...
Entfernen von libgsl23:amd64 (2.5+dfsg-6) ...
Entfernen von libgslcblas0:amd64 (2.5+dfsg-6) ...
Entfernen von libgtkspell0:amd64 (2.0.16-1.2) ...
Entfernen von libimage-magick-perl (8:6.9.10.23+dfsg-2.1) ...     ++++
Entfernen von libimage-magick-q16-perl (8:6.9.10.23+dfsg-2.1) ... ++++
Entfernen von libmagick++-6.q16-8:amd64 (8:6.9.10.23+dfsg-2.1) ...++++
Entfernen von libmicrodns0:amd64 (0.0.10-1) ...
Entfernen von libpotrace0:amd64 (1.15-1) ...
Entfernen von libvisio-0.1-1:amd64 (0.1.6-1+b2) ...
Entfernen von python-bs4 (4.7.1-1) ...
Entfernen von python-soupsieve (1.8+dfsg-1) ...
Entfernen von python-backports.functools-lru-cache (1.5-3) ...
Entfernen von python-html5lib (1.0.1-1) ...
Entfernen von python-lxml:amd64 (4.3.2-1) ...
Entfernen von python-scour (0.37-2) ...                          ++++          gir1.2-rsvg-2.0
Entfernen von python-webencodings (0.5.1-1) ...
Entfernen von scour (0.37-2) ...                                 ++++
Entfernen von python3-scour (0.37-2) ...                         ++++
Trigger für man-db (2.8.5-2) werden verarbeitet ...
Trigger für libc-bin (2.28-10) werden verarbeitet ...

Teo, it is so that the images in Forecast_Images are no longer available. Only the text is there.

Also the attempt, by partially installing suspected dependencies leads to no success. (marked with ++++)
Definitely in Buster the package inkscape is necessary.
Probably until the changes in sid(uction) are reflected in Buster.

unklar · 2020-05-01 17:58:09

Teo, I have another sid(uction) installation with LXDE (and conky1.9 ). This one has never seen your weather_com_conky_script and therefore no inkscape.

Here inkscape in the version

apt policy inkscape
inkscape:
  Installiert:           1.0~rc1-4
  Installationskandidat: 1.0~rc1-4
  Versionstabelle:
 *** 1.0~rc1-4 500
        500 http://httpredir.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status

installed. And, although all other imagemagick packages are installed, the images in Forecast_Image are not created.

I am increasingly coming to the conclusion that Debian is a Python problem in this case...

see

apt install inkscape
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:
  gir1.2-gst-plugins-base-1.0 gir1.2-gstreamer-1.0 gstreamer1.0-gl gstreamer1.0-plugins-bad
  libgraphene-1.0-0 libgstreamer-gl1.0-0 libsrt1 libsrtp2-1 libusrsctp1 libwildmidi2
  python-gst-1.0
Verwenden Sie »apt autoremove«, um sie zu entfernen.
Die folgenden zusätzlichen Pakete werden installiert:
  fig2dev libcdr-0.1-1 libgdl-3-5 libgdl-3-common libgtkspell3-3-0 libimage-magick-perl
  libimage-magick-q16-perl libmagick++-6.q16-8 libnetpbm10 libpotrace0 librevenge-0.0-0
  libvisio-0.1-1 libwmf-bin libwpd-0.10-10 libwpg-0.3-3 netpbm python3-bs4 python3-html5lib
  python3-lxml python3-numpy python3-scour python3-soupsieve python3-webencodings
Vorgeschlagene Pakete:
  xfig dia inkscape-tutorials libsvg-perl libxml-xql-perl pstoedit python3-uniconvertor
  imagemagick-doc python3-genshi python3-lxml-dbg python-lxml-doc gfortran python-numpy-doc
  python3-dev python3-pytest python3-numpy-dbg
Die folgenden Pakete werden ENTFERNT:
  python-lxml radiotray
Die folgenden NEUEN Pakete werden installiert:
  fig2dev inkscape libcdr-0.1-1 libgdl-3-5 libgdl-3-common libgtkspell3-3-0 libimage-magick-perl
  libimage-magick-q16-perl libmagick++-6.q16-8 libnetpbm10 libpotrace0 librevenge-0.0-0
  libvisio-0.1-1 libwmf-bin libwpd-0.10-10 libwpg-0.3-3 netpbm python3-bs4 python3-html5lib
  python3-lxml python3-numpy python3-scour python3-soupsieve python3-webencodings
0 aktualisiert, 24 neu installiert, 2 zu entfernen und 1 nicht aktualisiert.
Es müssen 23,8 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 113 MB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n]

Last edited by unklar (2020-05-01 18:05:56)

TeoBigusGeekus · 2020-05-01 21:05:24

Now that's interesting.
So, installing inkscape doesn't solve it at all.
Even after installing the python-scour package?

unklar · 2020-05-02 06:45:55

^Because I was fed up yesterday, I did the same thing with the packages as I did here and switched off the box.

Now look at the launch from this morning:

and, I swear, reboots yesterday, too. 8o (S11, it's your conky1.9 )

Last edited by unklar (2020-05-02 06:50:15)

ceeslans · 2020-05-02 12:18:38

unklar wrote:

^Because I was fed up yesterday, I did the same thing with the packages as I did here and switched off the box.
Now look at the launch from this morning:
https://i.imgur.com/J5dQWKAt.png
and, I swear, reboots yesterday, too.

noticed this was on another sid(uction) box.
out of curiosity: did you by any chance also try this on your lithium install - and reproduced the same amazing result?

unklar · 2020-05-02 13:04:11

@ceeslans,
yes, I wrote it down from here

In Lithium(Buster) inkscape is still necessary.
Not in Sid(uction).

PS: ^Excuse me, I may have to clarify the procedure one more time

- I became aware of this problem when IN SID updated inkscape version 0.92.4-3 to 1.0~rc1-4 3 days ago.
From this point on the images were missing in the weather_com_conky_script

- in Buster the 0.92.4-3 is still used

The joke is that with the new version of inkscape, sid no longer shows images. After purge and complete cleanup of the dependencies of the package inkscape, the next day it is ok.

I suspect it has something to do with Python.

Last edited by unklar (2020-05-02 14:00:34)

TeoBigusGeekus · 2020-05-02 20:24:08

So, what someone needs in Sid to run the script is just imagemagick (and a thorough purge of the inkscape package).
Am I correct?
Is the python-scour package still needed?

unklar · 2020-05-03 14:44:45

^^I can't give you a clear answer, because in siduction-lxde, which, as I already wrote regarding your weather.com script, was virgin, I still had to install the new inkscape first and then uninstall it again (with all dependencies). So stupid that sounds!

and

apt policy scour python-scour python3-scour
scour:
  Installiert:           (keine)
  Installationskandidat: 0.37-4
  Versionstabelle:
     0.37-4 500
        500 http://deb.debian.org/debian unstable/main amd64 Packages
python-scour:
  Installiert:           (keine)
  Installationskandidat: (keine)
  Versionstabelle:
python3-scour:
  Installiert:           (keine)
  Installationskandidat: 0.37-4
  Versionstabelle:
     0.37-4 500
        500 http://deb.debian.org/debian unstable/main amd64 Packages

are no longer on board

Teo, I made a request on the siduction forum. Maybe someone has an idea...

TeoBigusGeekus · 2020-05-03 15:38:21

That's at least funny and weird.
I think you should perform an exorcism on your system...

unklar · 2020-05-04 13:40:16

Teo,
when you install inkscape, 24 packages are installed.

When uninstalling, 20 are removed. 4 packages remain in the system.
These are:

fig2dev
libnetpbm10
libwmf-bin
netpbm

All utilities/libraries/graphics tools for editing svg and png, among others. [aptitude show or apt show make it clear]

Version differences (Buster - Sid) exist only between
fig2dev and libwmf-bin.

Buster                            Sid
fig2dev    1:3.2.7a-5+deb10u3     1:3.2.7b-3

libwmf-bin 0.2.8.4-14             0.2.8.4-17

This exclusion procedure was shown to me in the siduction forum.

So it can be assumed that this is the solution to the riddle.

Now I finally have a beer...

TeoBigusGeekus · 2020-05-04 20:50:14

I don't have any of these packages, but congratulations unklar!
Ich gratuliere dir dazu!!!

Drink a couple for me please.

Well folks, if it works for you, it's OK then.
Is this the final verdict then?
Is the problem solved by installing these

fig2dev
libnetpbm10
libwmf-bin
netpbm

packages?

Sector11 · 2020-05-04 21:59:36

Well, the plot thickens, the mystery is in a deeper fog and confusion reigns inside . . .

Twilight Zones episode of; Welcome to the world of Debian 10.

inkscape is installed . . . . these files should be there, fig2dev, libnetpbm10, libwmf-bin,
netpbm and Teo's scripts work just fine.

EXCEPT:

 04 May 20 @ 18:46:50 ~
   $ sho fig2dev libnetpbm10 libwmf-bin netpbm
alias = aptitude show filename
Package: fig2dev                  
State: not installed

Package: libnetpbm10
State: not installed

Package: libwmf-bin
State: not installed

Package: netpbm
State: not installed

. . . none are installed.

Stay tuned for Episode II after dinner

Sector11 · 2020-05-04 23:29:24

Twilight Zone's Episode II of; Welcome to the world of Debian 10.

Teo's scripts - no errors with inkascape...

remove inkscape....

alias aremv='sudo apt-get autoremove --purge'

   $ aremv inkscape
[sudo] password for sector11: 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages will be REMOVED:
  inkscape* libgsl23* libgslcblas0* libgtkspell0* libmagick++-6.q16-8* libpotrace0*
0 upgraded, 0 newly installed, 6 to remove and 0 not upgraded.
After this operation, 84.5 MB disk space will be freed.
Do you want to continue? [Y/n] y
(Reading database ... 131100 files and directories currently installed.)
Removing inkscape (0.92.4-3) ...
Removing libgsl23:amd64 (2.5+dfsg-6) ...
Removing libgslcblas0:amd64 (2.5+dfsg-6) ...
Removing libgtkspell0:amd64 (2.0.16-1.2) ...
Removing libmagick++-6.q16-8:amd64 (8:6.9.10.23+dfsg-2.1) ...
Removing libpotrace0:amd64 (1.15-1) ...
Processing triggers for mime-support (3.62) ...
Processing triggers for hicolor-icon-theme (0.17-2) ...
Processing triggers for libc-bin (2.28-10) ...
Processing triggers for man-db (2.8.5-2) ...
Processing triggers for desktop-file-utils (0.23-4) ...
(Reading database ... 130171 files and directories currently installed.)
Purging configuration files for inkscape (0.92.4-3) ...

Rerun conkys:

convert-im6.q16: unrecognized color `var(--color-icy)' @ warning/color.c/QueryMagickColorCompliance/2766.
convert-im6.q16: non-conforming drawing primitive definition `fill' @ error/draw.c/RenderMVGContent/4301.
convert-im6.q16: unrecognized color `var(--color-icy)' @ warning/color.c/QueryMagickColorCompliance/2766.
convert-im6.q16: non-conforming drawing primitive definition `fill' @ error/draw.c/RenderMVGContent/4301.
convert-im6.q16: unrecognized color `var(--color-icy)' @ warning/color.c/QueryMagickColorCompliance/2766.
convert-im6.q16: non-conforming drawing primitive definition `fill' @ error/draw.c/RenderMVGContent/4301.
convert-im6.q16: unrecognized color `var(--color-icy)' @ warning/color.c/QueryMagickColorCompliance/2766.
convert-im6.q16: non-conforming drawing primitive definition `fill' @ error/draw.c/RenderMVGContent/4301.
convert-im6.q16: unrecognized color `var(--color-icy)' @ warning/color.c/QueryMagickColorCompliance/2766.
convert-im6.q16: non-conforming drawing primitive definition `fill' @ error/draw.c/RenderMVGContent/4301.
convert-im6.q16: unrecognized color `var(--color-icy)' @ warning/color.c/QueryMagic

so ...

   $ get libgsl23
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  libgslcblas0
Suggested packages:
  gsl-ref-psdoc | gsl-doc-pdf | gsl-doc-info | gsl-ref-html
The following NEW packages will be installed:
  libgsl23 libgslcblas0
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.

rerun conkys ....
Conky errors
removed and purged: libgsl23 libgslcblas0

   $ get libmagick++-6.q16-8
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  libmagick++-6.q16-8
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 275 kB of archives.
After this operation, 793 kB of additional disk space will be used.
Get:1 https://deb.debian.org/debian buster/main amd64 libmagick++-6.q16-8 amd64 8:6.9.10.23+dfsg-2.1 [275 kB]
Fetched 275 kB in 0s (1,543 kB/s)       
Retrieving bug reports... Done
Parsing Found/Fixed information... Done
Selecting previously unselected package libmagick++-6.q16-8:amd64.
(Reading database ... 130172 files and directories currently installed.)
Preparing to unpack .../libmagick++-6.q16-8_8%3a6.9.10.23+dfsg-2.1_amd64.deb ...
Unpacking libmagick++-6.q16-8:amd64 (8:6.9.10.23+dfsg-2.1) ...
Setting up libmagick++-6.q16-8:amd64 (8:6.9.10.23+dfsg-2.1) ...
Processing triggers for libc-bin (2.28-10) ...
 
 04 May 20 @ 20:18:36 ~
   $

rerun conkys ....
Conky errors
removed & purged: libmagick++-6.q16-8

Installed: libpotrace0
rerun conkys ....
Conky errors
removed & purged: libpotrace0

lets work on the 4 files unklar talked about:

do it the fast way:

get fig2dev libnetpbm10 libwmf-bin netpbm

installed ....
Installed: fig2dev libnetpbm10 libwmf-bin netpbm
rerun conkys ....
Conky errors
removed & purged: fig2dev libnetpbm10 libwmf-bin netpbm

reinstalled inkscape ....

restrarted conkys

errors gone!

Sector11 · 2020-05-04 23:31:36

NOTE TO ABOVE:

I do not install "Recommended or Suggested" packages:

   $ get inkscape
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  libgsl23 libgslcblas0 libgtkspell0 libmagick++-6.q16-8
Suggested packages:
  dia inkscape-tutorials libsvg-perl libxml-xql-perl pstoedit python-uniconvertor gsl-ref-psdoc
  | gsl-doc-pdf | gsl-doc-info | gsl-ref-html
Recommended packages:
  aspell fig2dev libimage-magick-perl libwmf-bin python-lxml python-scour
The following NEW packages will be installed:
  inkscape libgsl23 libgslcblas0 libgtkspell0 libmagick++-6.q16-8

unklar · 2020-05-05 09:18:46

Thanks for your tests, my friend.

It's really confusing.
I tested with BL-Lithium and siduction. I did not install recommended packages either. But before I asked in the siduction forum, my first trail was this ---> WARNING:

unklar@lithium:~$ aptitude show scour
Paket: scour                                 
Version: 0.37-2
Zustand: Installiert
Automatisch installiert: ja
...
...
Beschreibung: SVG scrubber and optimizer (CLI and debhelper)
 Scour is a Python module that aggressively cleans SVG files, removing a lot of unnecessary
 information that certain tools or authors embed into their documents.  The goal of scour is to
 provide an identically rendered image (i.e. a scoured document should have no discernible visible
 differences from the original file) while minimizing the file size. 
 
 WARNING: Scour is intended to be run on files that have been edited in Vector Graphics editors such
 as Inkscape or Adobe Illustrator.  Scour attempts to optimize the file, and as result, it will
 change the file's structure and (possibly) its semantics.  If you have hand-edited your SVG files,
 you will probably not be happy with the output of Scour. 
 
 This package provides the "scour" command line utility and a dh_scour debhelper extension which
 optimizes all shipped SVGs during package build. If gir1.2-rsvg-2.0 and python3-gi-cairo are
 available, it will also do a before/after comparison and discard the optimized image if they differ
 by more than 0.05%.
Homepage: https://github.com/codedread/scour

because in BL, unlike sid(ction), both are "innately"(?)
are installed.

unklar@lithium:~$ apt policy gir1.2-rsvg-2.0 python3-gi-cairo
gir1.2-rsvg-2.0:
  Installiert:           2.44.10-2.1
  Installationskandidat: 2.44.10-2.1
  Versionstabelle:
 *** 2.44.10-2.1 500
        500 https://deb.debian.org/debian buster/main amd64 Packages
        100 /var/lib/dpkg/status
python3-gi-cairo:
  Installiert:           3.30.4-1
  Installationskandidat: 3.30.4-1
  Versionstabelle:
 *** 3.30.4-1 500
        500 https://deb.debian.org/debian buster/main amd64 Packages
        100 /var/lib/dpkg/status

in sid(uction) there is the AND not, because here only python3-gi-cairo is installed.

It drove me crazy "before" and "after". As I already wrote, the text to the pictures is "there". ]:D

I think the Debian10, BL-Lithium, -Buster users still have time to act until the inkscape package 1.0~rc1-4 comes up.

Last edited by unklar (2020-05-05 09:20:38)

unklar · 2020-05-05 16:08:37

The friends in the siduction forum just made me aware of an article about the new inkscape version 1.

Pro-Linux.de wrote:

The change of the extension interface to Python 3 causes some externally developed extensions to stop working. Details can be found in the release notes.

Pro-Linux

This makes the "mess" with inkscape obvious.

Sector11 · 2020-05-05 23:50:51

Well, lets hope by the time I move away from Debian 10 - the dust will have settled.

TeoBigusGeekus · 2020-05-06 19:38:21

Thank you guys for the feedback.
It seems that it is a transitional time for inkscape in Debian, we should wait and see.

Sector11 · 2020-05-06 21:18:12

Now I feel at home ...

Most of my working life I heard:

Hurry up and wait.

#3421 2020-05-01 10:27:27

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3422 2020-05-01 12:50:55

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3423 2020-05-01 17:58:09

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3424 2020-05-01 21:05:24

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3425 2020-05-02 06:45:55

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3426 2020-05-02 12:18:38

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3427 2020-05-02 13:04:11

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3428 2020-05-02 20:24:08

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3429 2020-05-03 14:44:45

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3430 2020-05-03 15:38:21

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3431 2020-05-04 13:40:16

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3432 2020-05-04 20:50:14

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3433 2020-05-04 21:59:36

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3434 2020-05-04 23:29:24

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3435 2020-05-04 23:31:36

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3436 2020-05-05 09:18:46

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3437 2020-05-05 16:08:37

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3438 2020-05-05 23:50:51

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3439 2020-05-06 19:38:21

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

#3440 2020-05-06 21:18:12

Re: Conky weather+moon scripts (Accuw/WUndergr/NWS/MoonGiant)

Board footer