You are not logged in.

  1. Index
  2. » Off Topic
  3. » Post your Bunsenlabs linux system specs

Pages: 1 2 3 4

#21 2015-12-12 09:24:23

nobody0
Disabled account
Registered: 2015-09-29
Posts: 664

Re: Post your Bunsenlabs linux system specs

System:    Host: open Kernel: 4.3.0-2-generic x86_64 (64 bit)
           Desktop: Openbox 3.6.1 Distro: Ubuntu 16.04 xenial
Machine:   System: LENOVO product: INVALID v: Lenovo B460
           Mobo: LENOVO model: MoutCook
           Bios: LENOVO v: 2ECN33WW date: 02/18/2011
CPU:       Dual core Intel Core i3 M 380 (-HT-MCP-) cache: 3072 KB 
           clock speeds: max: 2533 MHz 1: 1733 MHz 2: 1599 MHz 3: 1199 MHz
           4: 1199 MHz
Graphics:  Card: Intel Core Processor Integrated Graphics Controller
           Display Server: X.Org 1.17.3 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1366x768@59.99hz
           GLX Renderer: Mesa DRI Intel Ironlake Mobile
           GLX Version: 2.1 Mesa 11.0.6
Audio:     Card Intel 5 Series/3400 Series High Definition Audio
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.3.0-2-generic
Network:   Card-1: Qualcomm Atheros AR8131 Gigabit Ethernet driver: atl1c
           IF: enp3s0 state: down mac: f0:de:f1:4c:5c:87
           Card-2: Intel Centrino Wireless-N 1000 [Condor Peak]
           driver: iwlwifi
           IF: wlp4s0 state: up mac: 8c:a9:82:65:e3:a6
Drives:    HDD Total Size: 320.1GB (6.6% used)
           ID-1: /dev/sda model: WDC_WD3200BEVT size: 320.1GB
Partition: ID-1: / size: 22G used: 17G (83%) fs: ext4 dev: /dev/sda11
           ID-2: swap-1 size: 3.14GB used: 0.00GB (0%) fs: swap dev: /dev/sda13
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 41.0C mobo: 36.0C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 195 Uptime: 1:21 Memory: 877.4/2807.3MB
           Client: Shell (bash) inxi: 2.2.28 
open@open:~$

Offline

#22 2015-12-12 15:45:28

wagmic
Member
From: Casablanca
Registered: 2015-09-30
Posts: 95

Re: Post your Bunsenlabs linux system specs

my NC10 died after seven years so this is my new machine

System:    Host: bunsen Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.2 
           Distro: BunsenLabs 8.2 Hydrogen 
Machine:   System: Sony product: VGN-FW11L v: C600GV11
           Mobo: Sony model: VAIO Bios: American Megatrends v: R0270Y0 date: 10/07/2009
CPU:       Dual core Intel Core2 Duo P8400 (-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 800 MHz 2: 2266 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RV620/M82 [Mobility Radeon HD 3450/3470]
           Display Server: X.Org 1.16.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1600x900@59.95hz
           GLX Renderer: Gallium 0.4 on AMD RV620 GLX Version: 3.0 Mesa 10.3.2
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] RV620 HDMI Audio [Radeon HD 3400 Series] 
           driver: snd_hda_intel 
           Card-2 Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card-1: Intel WiFi Link 5100 driver: iwlwifi
           IF: wlan0 state: up mac: 00:16:ea:26:c9:f4
           Card-2: Marvell 88E8055 PCI-E Gigabit Ethernet Controller driver: sky2
           IF: eth0 state: down mac: 00:1d:ba:1a:8f:33
Drives:    HDD Total Size: 250.1GB (3.7% used)
           ID-1: /dev/sda model: Hitachi_HTS54252 size: 250.1GB
Partition: ID-1: / size: 9.1G used: 3.3G (39%) fs: ext4 dev: /dev/sda1 
           ID-2: /home size: 217G used: 1.6G (1%) fs: ext4 dev: /dev/sda6 
           ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 48.0C mobo: 48.0C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 142 Uptime: 6:54 Memory: 984.7/2008.6MB Client: Shell (bash) inxi: 2.1.28

La liberté, personne ne peut l’expliquer mais tout le monde peut la comprendre.Cecilia Meireles
Tout ce qui n'est pas donné ou partagé est perdu (proverbe tsigane)

Offline

#23 2015-12-12 16:24:33

roger72
New Member
From: Switzerland
Registered: 2015-09-29
Posts: 4

Re: Post your Bunsenlabs linux system specs

My Desktop Machine

System:    Host: romu-ws01 Kernel: 3.16.0-4-amd64 x86_64 (64 bit)
           Desktop: Openbox 3.5.2 Distro: BunsenLabs 8.2 Hydrogen 
Machine:   System: Hewlett-Packard product: HP EliteDesk 800 G1 SFF
           Mobo: Hewlett-Packard model: 1998 Bios: Hewlett-Packard v: L01 v02.65 date: 07/13/2015
CPU:       Quad core Intel Core i7-4790 (-HT-MCP-) cache: 8192 KB 
           Clock Speeds: 1: 3893 MHz 2: 3875 MHz 3: 3189 MHz 4: 3989 MHz 5: 2856 MHz 6: 3678 MHz
           7:  3997 MHz 8: 1449 MHz
Graphics:  Card: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller
           Display Server: X.Org 1.16.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.00hz
           GLX Renderer: Mesa DRI Intel Haswell Desktop GLX Version: 3.0 Mesa 10.3.2
Audio:     Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel 
           Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card: Intel Ethernet Connection I217-LM driver: e1000e
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 64:51:06:2f:67:a9
Drives:    HDD Total Size: 1256.3GB (12.5% used) ID-1: /dev/sda model: SAMSUNG_MZ7PD256 size: 256.1GB
           ID-2: /dev/sdb model: WDC_WD10EALX size: 1000.2GB
Partition: ID-1: / size: 184G used: 5.6G (4%) fs: ext4 dev: /dev/sda2 
           ID-2: /home size: 895G used: 120G (15%) fs: ext4 dev: /dev/sdb2 
           ID-3: swap-1 size: 24.00GB used: 0.00GB (0%) fs: swap dev: /dev/sdb1 
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 195 Uptime: 6:30 Memory: 578.3/15972.5MB Client: Shell (zsh) inxi: 2.1.28

Offline

#24 2015-12-14 22:40:24

Temetka
Member
From: Sol System, Western Spiral Arm
Registered: 2015-10-14
Posts: 549

Re: Post your Bunsenlabs linux system specs

Lenovo Thinkpad T410
14" WXGA+ 144x900 LCD
Intel Core i5 M520 @ 2.4 GHz
8GB DDR3 RAM
256MB Nvidia NVS GPU
250GB SSD
DVD-RW (never used)

The meaning of life is to just be alive. It is so plain and so obvious
    and so simple. And yet everybody rushes aroound in a great panic
             as if it were necessary to achieve something beyond themselves.
                                                                                                             - Alan Watts

Offline

#25 2015-12-21 12:50:51

Zorg
New Member
From: France
Registered: 2015-10-31
Posts: 2

Re: Post your Bunsenlabs linux system specs

My laptop : 

13:42-zorg@potato-ship:~$ inxi -F
System:    Host: potato-ship Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.2 
           Distro: BunsenLabs 8.2 Hydrogen 
Machine:   System: Acer product: Aspire V3-772G v: V1.15
           Mobo: Acer model: VA70_HW v: Type2 - Board Version Bios: Insyde v: V1.15 date: 03/07/2014
CPU:       Quad core Intel Core i7-4702MQ (-HT-MCP-) cache: 6144 KB 
           Clock Speeds: 1: 3134 MHz 2: 3169 MHz 3: 3095 MHz 4: 3022 MHz 5: 3081 MHz 6: 3186 MHz 7: 3159 MHz
           8: 2898 MHz
Graphics:  Card-1: Intel 4th Gen Core Processor Integrated Graphics Controller
           Card-2: NVIDIA GM107M [GeForce GTX 850M]
           Display Server: X.Org 1.16.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.01hz, 1680x1050@59.95hz
           GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 10.3.2
Audio:     Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel 
           Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller driver: snd_hda_intel 
           Card-3 Logitech G930 driver: USB Audio 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card-1: Qualcomm Atheros AR9462 Wireless Network Adapter driver: ath9k
           IF: wlan0 state: up mac: 18:cf:5e:91:37:cc
           Card-2: Broadcom NetLink BCM57780 Gigabit Ethernet PCIe driver: tg3
           IF: eth0 state: down mac: 60:02:92:32:0b:a4
Drives:    HDD Total Size: 1144.1GB (27.0% used) ID-1: /dev/sdb model: WDC_WD10JPVX size: 1000.2GB
           ID-2: /dev/sda model: LITEON_IT_LMT size: 128.0GB
           ID-3: USB /dev/sdc model: USB_DISK_3.0_Pro size: 15.8GB
Partition: ID-1: / size: 55G used: 11G (20%) fs: ext4 dev: /dev/sda3 
           ID-2: swap-1 size: 4.00GB used: 0.00GB (0%) fs: swap dev: /dev/sda4 
Sensors:   System Temperatures: cpu: 49.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 185 Uptime: 1 day Memory: 1043.6/7884.0MB Client: Shell (bash) inxi: 2.1.28

Offline

#26 2015-12-22 07:38:29

brontosaurusrex
Middle Office
Registered: 2015-09-29
Posts: 2,755

Re: Post your Bunsenlabs linux system specs

My 10 year old server/desktop

System:    Host: crunchbang Kernel: 3.2.0-4-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.0 Distro: CrunchBang Linux waldorf
Machine:   System: Dell product: Dell DM051
           Mobo: Dell model: 0WG261 Bios: Dell version: A02 date: 10/13/2005
CPU:       Single core Intel Pentium 4 CPU (-HT-) cache: 2048 KB flags: (lm nx sse sse2 sse3) 
           Clock Speeds: 1: 3192.430 MHz 2: 3192.430 MHz
Graphics:  Card: NVIDIA G96 [GeForce 9400 GT] X.Org: 1.12.4 driver: nvidia Resolution: 1280x1024@75.0hz 
           GLX Renderer: GeForce 9400 GT/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 304.125
Audio:     Card: Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel Sound: ALSA ver: 1.0.24
Network:   Card: Intel NM10/ICH7 Family LAN Controller driver: e100 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: ************
Drives:    HDD Total Size: 2320.5GB (277.2% used) 1: id: /dev/sda model: ST2000DM001 size: 2000.4GB 
           2: id: /dev/sdb model: ST3320620AS size: 320.1GB 
Partition: ID: / size: 45G used: 17G (40%) fs: ext4 ID: /home size: 1.8T used: 1.4T (85%) fs: ext4 
           ID: swap-1 size: 1.00GB used: 0.18GB (18%) fs: swap 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 128 Uptime: 9 days Memory: 410.0/1001.2MB Client: Shell inxi: 1.8.20

And the fastest sheep in the herd (99% of time used as a render node)
http://shrani.si/f/2Z/e3/1NwPW8AG/i5.png

Last edited by brontosaurusrex (2015-12-22 07:45:30)

My website full of interesting stuff.

Offline

#27 2015-12-22 07:57:22

Temetka
Member
From: Sol System, Western Spiral Arm
Registered: 2015-10-14
Posts: 549

Re: Post your Bunsenlabs linux system specs

I manually posted my specs earlier. But here's my inxi -F

System:    Host: Raven Kernel: 3.16.0-4-amd64 x86_64 (64 bit) 
           Desktop: Openbox 3.5.2 Distro: BunsenLabs 8.2 Hydrogen 
Machine:   System: LENOVO product: 252226U v: ThinkPad T410
           Mobo: LENOVO model: 252226U
           Bios: LENOVO v: 6IET85WW (1.45 ) date: 02/14/2013
CPU:       Dual core Intel Core i5 M 520 (-HT-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 1199 MHz 2: 1199 MHz 3: 1199 MHz 4: 1199 MHz
Graphics:  Card: NVIDIA GT218M [NVS 3100M]
           Display Server: X.Org 1.16.4 drivers: nouveau (unloaded: fbdev,vesa)
           Resolution: 1440x900@60.04hz
           GLX Renderer: Gallium 0.4 on NVA8 GLX Version: 3.0 Mesa 10.3.2
Audio:     Card-1 Intel 5 Series/3400 Series High Definition Audio 
           driver: snd_hda_intel 
           Card-2 NVIDIA High Definition Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card-1: Intel Centrino Advanced-N 6200 driver: iwlwifi
           IF: wlan0 state: up mac: 00:23:14:2d:f0:18
           Card-2: Intel 82577LM Gigabit Network Connection driver: e1000e
           IF: eth0 state: down mac: 00:26:2d:f3:c5:00
Drives:    HDD Total Size: 256.1GB (43.6% used)
           ID-1: /dev/sda model: LITEON_LCH size: 256.1GB
Partition: ID-1: / size: 226G used: 95G (45%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 10.40GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 50.0C mobo: 0.0C gpu: 60.0 
           Fan Speeds (in rpm): cpu: 1993 
Info:      Processes: 174 Uptime: 2 days Memory: 794.9/7865.7MB 
           Client: Shell (bash) inxi: 2.1.28

The meaning of life is to just be alive. It is so plain and so obvious
    and so simple. And yet everybody rushes aroound in a great panic
             as if it were necessary to achieve something beyond themselves.
                                                                                                             - Alan Watts

Offline

#28 2015-12-23 00:03:37

C#Coder4ever
BL Keyboard Troll
From: /dev/zero
Registered: 2015-09-29
Posts: 284

Re: Post your Bunsenlabs linux system specs

my server

System:    Host: robbie Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Console: tty 1 Distro: Debian GNU/Linux 8 
Machine:   Mobo: MSI model: B75A-G43 (MS-7758) v: 2.0 Bios: American Megatrends v: V10.2 date: 04/19/2012
CPU:       Dual core Intel Core i3-2100 (-HT-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 1600 MHz 2: 1628 MHz 3: 1769 MHz 4: 1594 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
           Display Server: N/A driver: N/A tty size: 244x33 Advanced Data: N/A out of X
Audio:     Card Intel 7 Series/C210 Series Family High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card-1: Ralink RT2561/RT61 802.11g PCI driver: rt61pci
           IF: wlan0 state: up mac: 00:1a:ef:02:f6:79
           Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 8c:89:a5:e6:4f:78
Drives:    HDD Total Size: 1064.2GB (43.4% used) ID-1: /dev/sda model: C300 size: 64.0GB
           ID-2: /dev/sdb model: WDC_WD10EFRX size: 1000.2GB
Partition: ID-1: / size: 55G used: 8.8G (17%) fs: ext4 dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 169 Uptime: 2 days Memory: 1138.6/7861.1MB Init: systemd runlevel: 5 
           Client: Shell (zsh) inxi: 2.1.28

ever since I got jenkins installed and running on this, RAM usage has skyrocketed lol

Last edited by C#Coder4ever (2015-12-23 00:06:07)

Peripheral, SBC, and router addict lmao
Keeb & SSD Discussions

Offline

#29 2015-12-24 03:35:05

C#Coder4ever
BL Keyboard Troll
From: /dev/zero
Registered: 2015-09-29
Posts: 284

Re: Post your Bunsenlabs linux system specs

and one more, my secondary desktop

System:    Host: glados Kernel: 3.13.0-37-generic x86_64 (64 bit) Desktop: Gnome Distro: Linux Mint 17.1 Rebecca
Machine:   Mobo: TAR model: TZ77B version: 5.0 Bios: American Megatrends version: 4.6.5 date: 08/23/2012
CPU:       Quad core Intel Xeon CPU E3-1220 V2 (-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) 
           Clock Speeds: 1: 1600.00 MHz 2: 1600.00 MHz 3: 1600.00 MHz 4: 1600.00 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280] 
           X.Org: 1.15.1 driver: fglrx Resolution: 1920x1080@60.1hz, 1920x1080@60.0hz 
           GLX Renderer: AMD Radeon HD 7900 Series GLX Version: 4.4.13283 - CPC 14.501.1003
Audio:     Card-1: Intel 7 Series/C210 Series Chipset Family High Definition Audio Controller driver: snd_hda_intel
           Card-2: Advanced Micro Devices [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series] driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: b8:97:5a:0d:dd:57
           Card-2: Ralink RT3090 Wireless 802.11n 1T/1R PCIe driver: rt2800pci 
           IF: wlan1 state: up mac: 74:de:2b:fa:e3:3b
Drives:    HDD Total Size: 1128.2GB (31.2% used) 1: id: /dev/sda model: TS128GSSD320 size: 128.0GB 
           2: id: /dev/sdb model: WDC_WD1002FAEX size: 1000.2GB 
Partition: ID: / size: 118G used: 6.7G (6%) fs: ext4 ID: /home size: 917G used: 322G (37%) fs: ext4 
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 41.00C 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 186 Uptime: 3 min Memory: 571.7/16014.6MB Client: Shell inxi: 1.8.4


I promise I'll stop posting here for a while, please forgive me D:

Peripheral, SBC, and router addict lmao
Keeb & SSD Discussions

Offline

#30 2015-12-28 20:04:53

woof
Member
Registered: 2015-10-01
Posts: 43

Re: Post your Bunsenlabs linux system specs

My desktop:

I would have thought my SSD would be ID-1 but it put my 1TB storage drive there instead.
Latest addition is the GTX 970 SSC, bought with my christmas money. Pretty happy with it.

al@blxeon:~$ inxi -F
System:    Host: blxeon Kernel: 3.16.0-4-amd64 x86_64 (64 bit) 
           Desktop: Openbox 3.5.2 Distro: BunsenLabs 8.2 Hydrogen 
Machine:   Mobo: Gigabyte model: EP35-DS3R v: x.x
           Bios: Award v: F4 date: 06/19/2009
CPU:       Quad core Intel Xeon X5450 (-HT-MCP-) cache: 6144 KB 
           Clock Speeds: 1: 2400 MHz 2: 2400 MHz 3: 2400 MHz 4: 2400 MHz
Graphics:  Card: NVIDIA Device 13c2
           Display Server: X.Org 1.16.4 driver: nvidia
           Resolution: 1920x1080@60.00hz
           GLX Renderer: GeForce GTX 970/PCIe/SSE2
           GLX Version: 4.5.0 NVIDIA 355.11
Audio:     Card-1 NVIDIA Device 0fbb driver: snd_hda_intel 
           Card-2 Intel 82801I (ICH9 Family) HD Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: 00:1d:7d:04:f1:2c
Drives:    HDD Total Size: 1120.2GB (0.8% used)
           ID-1: /dev/sdb model: ST1000DX001 size: 1000.2GB
           ID-2: /dev/sda model: SanDisk_SDSSDA12 size: 120.0GB
Partition: ID-1: / size: 10G used: 2.8G (30%) fs: ext4 dev: /dev/sda3 
           ID-2: /home size: 53G used: 122M (1%) fs: ext4 dev: /dev/sda4 
           ID-3: swap-1 size: 6.00GB used: 0.00GB (0%) fs: swap dev: /dev/sdb5 
Sensors:   System Temperatures: cpu: 42.0C mobo: 28.0C gpu: 45C 
           Fan Speeds (in rpm): cpu: 1790 fan-2: 0 fan-3: 0 fan-4: 2732 
Info:      Processes: 149 Uptime: 34 min Memory: 404.3/3962.5MB 
           Client: Shell (bash) inxi: 2.1.28

Offline

#31 2015-12-29 08:00:47

balloon
Member
From: 日本 Japan
Registered: 2015-11-21
Posts: 53
Website

Re: Post your Bunsenlabs linux system specs

My main linux machine:

balloon@BunsenLabs:~$ inxi -F
System:    Host: BunsenLabs Kernel: 3.16.0-4-amd64 x86_64 (64 bit) 
           Desktop: Openbox 3.5.2 Distro: BunsenLabs 8.2 Hydrogen 
Machine:   System: NEC product: N8-S720XMZCUUZ2
           Mobo: NEC model: MS-7428VR v: 1.0
           Bios: NEC v: 0008/461S0800 date: 02/09/2009
CPU:       Single core Intel Celeron 440 (-UP-) cache: 512 KB
           clocked at 1994 MHz
Graphics:  Card: Intel 4 Series Integrated Graphics Controller
           Display Server: X.Org 1.16.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1024x768@60.00hz
           GLX Renderer: Mesa DRI Intel G45/G43 GLX Version: 2.1 Mesa 10.3.2
Audio:     Card Intel 82801JI (ICH10 Family) HD Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card: Broadcom NetLink BCM5784M Gigabit Ethernet PCIe driver: tg3
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: 00:21:85:a8:00:2c
Drives:    HDD Total Size: 2000.4GB (0.9% used)
           ID-1: /dev/sda model: Hitachi_HDT72101 size: 1000.2GB
           ID-2: /dev/sdb model: Hitachi_HDT72101 size: 1000.2GB
Partition: ID-1: / size: 31G used: 8.9G (31%) fs: ext4 dev: /dev/sda18 
           ID-2: swap-1 size: 8.59GB used: 0.00GB (0%) fs: swap dev: /dev/sdb2 
Sensors:   System Temperatures: cpu: 40.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 132 Uptime: 2 min Memory: 508.3/3929.2MB 
           Client: Shell (bash) inxi: 2.1.28 
balloon@BunsenLabs:~$

BALLOON | FU-SEN - English balloon.gdn - 日本語 balloon.asia - GitHub fu-sen

Offline

#32 2015-12-29 08:07:11

balloon
Member
From: 日本 Japan
Registered: 2015-11-21
Posts: 53
Website

Re: Post your Bunsenlabs linux system specs

and Old VAIO (Sony PC):

balloon@VAIO-BunsenLabs:~$ inxi -F
System:    Host: VAIO-BunsenLabs Kernel: 3.16.0-4-686-pae i686 (32 bit) 
           Desktop: Openbox 3.5.2 Distro: BunsenLabs 8.2 Hydrogen 
Machine:   System: Sony product: VGC-M52B/L
           Mobo: ASUSTeK model: PASTA v: Rev 2.xx
           Bios: American Megatrends v: 3001 date: 03/16/2005
CPU:       Single core Intel Celeron (-UP-) cache: 128 KB clocked at 2799 MHz
Graphics:  Card: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
           Display Server: X.Org 1.16.4 driver: N/A
           Resolution: 1280x800@60.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits)
           GLX Version: 3.0 Mesa 10.3.2
Audio:     Card Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller 
           driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-686-pae
Network:   Card: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet
           driver: sis900
           IF: eth0 state: up speed: 100 Mbps duplex: full 
           mac: 00:11:d8:c8:00:d4
Drives:    HDD Total Size: 250.1GB (1.5% used)
           ID-1: /dev/sda model: WDC_WD2500AAJB size: 250.1GB
Partition: ID-1: / size: 11G used: 3.4G (34%) fs: ext4 dev: /dev/sda16 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 117 Uptime: 2 min Memory: 247.1/1991.0MB 
           Client: Shell (bash) inxi: 2.1.28 
balloon@VAIO-BunsenLabs:~$

Debian has been removed SiS video driver from jessie.
However, VAIO by using the driver that the user public has the ideal output:
https://github.com/gununu/xf86-video-sis-stable

Last edited by balloon (2015-12-29 08:14:16)

BALLOON | FU-SEN - English balloon.gdn - 日本語 balloon.asia - GitHub fu-sen

Offline

#33 2016-01-02 00:21:46

Döbbie03
Resident Metalhead
From: New Zealand
Registered: 2015-09-29
Posts: 3,872

Re: Post your Bunsenlabs linux system specs

The specs on my new play-around-on-laptop

CPU~Dual core Intel Core i5 M 430 (-HT-MCP-) clocked at 1199 Mhz
Kernel~3.16.0-4-amd64 x86_64 Up~2 min 
Mem~255.3/5846.5MB 
HDD~640.1GB(2.4% used) Procs~170 
Client~Shell inxi~2.1.28

Always thought this was a quad core for some reason.

Last edited by Döbbie03 (2016-01-02 00:22:19)

"All we are is dust in the wind, dude"
                                       - Theodore "Ted" Logan
"Led Zeppelin didn't write tunes that everybody liked, they left that to the Bee Gees."
                                       - Wayne Campbell

Offline

#34 2016-01-03 22:37:40

brontosaurusrex
Middle Office
Registered: 2015-09-29
Posts: 2,755

Re: Post your Bunsenlabs linux system specs

minidlna machine

System:    Host: debianserver Kernel: 3.16.0-4-686-pae i686 (32 bit) Console: tty 0 Distro: Debian GNU/Linux 8
Machine:   Mobo: ASUSTeK model: A7V600-X v: REV 1.xx Bios: Award v: ASUS A7V600-X 1002 date: 11/12/2003
CPU:       Single core AMD Athlon XP 2800+ (-UP-) cache: 512 KB clocked at 2070 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RV350 [Radeon 9600 Series]
           Display Server: N/A driver: N/A tty size: 187x24 Advanced Data: N/A out of X
Audio:     Card VIA VT8233/A/8235/8237 AC97 Audio Controller driver: snd_via82xx
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-686-pae
Network:   Card: VIA VT6102 [Rhine-II] driver: via-rhine
           IF: eth0 state: unknown speed: 100 Mbps duplex: full mac: 00:0e:a6:9b:3d:d1
Drives:    HDD Total Size: 443.0GB (1.9% used) ID-1: /dev/sda model: ST3160815A size: 160.0GB
           ID-2: /dev/sdc model: Maxtor_6Y120L0 size: 122.9GB ID-3: /dev/sdb model: WDC_WD1600JB size: 160.0GB
Partition: ID-1: / size: 406G used: 7.8G (3%) fs: ext4 dev: /dev/dm-0
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 78 Uptime: 41 min Memory: 78.1/1007.7MB Init: systemd runlevel: 5
           Client: Shell (bash) inxi: 2.1.28

Never used LVM before, but this one got 3 small disks inside...

My website full of interesting stuff.

Offline

#35 2016-01-19 02:22:14

jalexander9
Member
Registered: 2015-11-08
Posts: 152

Re: Post your Bunsenlabs linux system specs

Here is the Desktop:

System:    Host: antec01k18jessie Kernel: 3.16.0-4-686-pae i686 (32 bit) Desktop: Openbox 3.5.2 
           Distro: BunsenLabs 8.2 bunsen-hydrogen 
Machine:   System: Omni Tech product: N/A
           Mobo: Intel model: D865GBF v: AAC28142-410
           Bios: Intel v: BF86510A.86A.0061.P17.0404211558 date: 04/21/2004
CPU:       Single core Intel Pentium 4 (-HT-) cache: 512 KB 
           Clock Speeds: 1: 2593 MHz 2: 2593 MHz
Graphics:  Card: Intel 82865G Integrated Graphics Controller
           Display Server: X.Org 1.16.4 drivers: intel (unloaded: fbdev,vesa) Resolution: 1024x768@60.00hz
           GLX Renderer: Mesa DRI Intel 865G x86/MMX/SSE2 GLX Version: 1.3 Mesa 10.3.2
Audio:     Card Intel 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller driver: snd_intel8x0 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-686-pae
Network:   Card: Intel 82547EI Gigabit Ethernet Controller driver: e1000
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:11:11:67:23:46
Drives:    HDD Total Size: 160.0GB (6.3% used) ID-1: /dev/sda model: WDC_WD1600AAJB size: 160.0GB
Partition: ID-1: / size: 141G used: 3.3G (3%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 7.04GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 122 Uptime: 46 min Memory: 131.8/3634.1MB Client: Shell (bash) inxi: 2.1.28

Offline

#36 2016-01-19 06:04:38

Temetka
Member
From: Sol System, Western Spiral Arm
Registered: 2015-10-14
Posts: 549

Re: Post your Bunsenlabs linux system specs

Here's the specs for my beloved Precision M4400:

System:    Host: Osiris Kernel: 3.16.0-4-amd64 x86_64 (64 bit) 
           Desktop: Openbox 3.5.2 Distro: BunsenLabs 8.2 bunsen-hydrogen 
Machine:   System: Dell product: Precision M4400
           Mobo: Dell model: 0G328M Bios: Dell v: A29 date: 06/04/2013
CPU:       Dual core Intel Core2 Duo T9800 (-MCP-) cache: 6144 KB 
           Clock Speeds: 1: 1600 MHz 2: 2934 MHz
Graphics:  Card: NVIDIA G96GLM [Quadro FX 1700M]
           Display Server: X.Org 1.16.4 drivers: nouveau (unloaded: fbdev,vesa)
           Resolution: 1920x1200@60.00hz
           GLX Renderer: Gallium 0.4 on NV96 GLX Version: 3.0 Mesa 10.3.2
Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller 
           driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card-1: Broadcom BCM4312 802.11b/g LP-PHY driver: b43-pci-bridge
           IF: wlan0 state: up mac: 0c:60:76:01:b7:ea
           Card-2: Intel 82567LM Gigabit Network Connection driver: e1000e
           IF: eth0 state: down mac: 00:24:e8:da:ec:93
Drives:    HDD Total Size: 506.1GB (45.8% used)
           ID-1: /dev/sdb model: LITEON_LCH size: 256.1GB
           ID-2: /dev/sda model: Samsung_SSD_840 size: 250.1GB
Partition: ID-1: / size: 66G used: 15G (24%) fs: ext4 dev: /dev/sda6 
           ID-2: swap-1 size: 3.09GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   System Temperatures: cpu: 49.5C mobo: N/A gpu: 54.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 149 Uptime: 4:46 Memory: 646.0/7991.9MB 
           Client: Shell (bash) inxi: 2.1.28

The meaning of life is to just be alive. It is so plain and so obvious
    and so simple. And yet everybody rushes aroound in a great panic
             as if it were necessary to achieve something beyond themselves.
                                                                                                             - Alan Watts

Offline

#37 2016-01-21 10:34:29

Yannnd
New Member
From: The Netherlands
Registered: 2015-10-01
Posts: 2

Re: Post your Bunsenlabs linux system specs

My main machine. I ran Crunchbang Waldorf on it until about 2 weeks ago.

A big and well-meant 'thank you' to the BL Staff for all your deliberate efforts to make BunsenLabs a more than perfect successor of my favourite Linux distro for years!!!

inxi -F:

System:    Host: henk Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.2 
           Distro: BunsenLabs 8.2 bunsen-hydrogen 
Machine:   Mobo: ASRock model: B75 Pro3-M Bios: American Megatrends v: P1.90 date: 12/24/2013
CPU:       Quad core Intel Core i7-2600 (-HT-MCP-) cache: 8192 KB 
           Clock Speeds: 1: 2196 MHz 2: 1689 MHz 3: 1854 MHz 4: 1766 MHz 5: 2437 MHz 6: 2218 MHz 7: 2287 MHz
           8: 1600 MHz
Graphics:  Card: NVIDIA GF104 [GeForce GTX 460]
           Display Server: X.Org 1.16.4 driver: nvidia Resolution: 1680x1050@69.88hz, 1680x1050@69.88hz
           GLX Renderer: GeForce GTX 460/PCIe/SSE2 GLX Version: 4.4.0 NVIDIA 340.65
Audio:     Card-1 NVIDIA GF104 High Definition Audio Controller driver: snd_hda_intel 
           Card-2 Intel 7 Series/C210 Series Family High Definition Audio Controller driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: d0:50:99:5a:36:70
Drives:    HDD Total Size: 1310.3GB (23.4% used) ID-1: /dev/sdb model: WDC_WD10EFRX size: 1000.2GB
           ID-2: /dev/sdc model: MKNSSDCR60GB size: 60.0GB ID-3: /dev/sda model: Samsung_SSD_850 size: 250.1GB
Partition: ID-1: / size: 20G used: 5.7G (31%) fs: ext4 dev: /dev/sda2 
           ID-2: /home size: 40G used: 7.8G (21%) fs: ext4 dev: /dev/sda3 
           ID-3: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 36.0C mobo: 35.0C gpu: 41C 
           Fan Speeds (in rpm): cpu: N/A fan-1: 1151 fan-2: 1009 fan-3: 1138 fan-4: 0 fan-5: 0 
Info:      Processes: 200 Uptime: 57 min Memory: 2008.2/16026.1MB Client: Shell (bash) inxi: 2.1.28

Bunsenlabs Hydrogen - Solus 1.0 Shannon

Offline

#38 2016-01-21 15:47:29

jmad2016
Member
From: Ohio
Registered: 2016-01-16
Posts: 15

Re: Post your Bunsenlabs linux system specs

james@TellaTran1:/tmp$ inxi -F
System:    Host: TellaTran1 Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Desktop: i3 4.8
           Distro: BunsenLabs 8.2 bunsen-hydrogen
Machine:   Mobo: ASUSTeK model: M5A97 R2.0 v: Rev 1.xx Bios: American Megatrends v: 2501 date: 04/07/2014
CPU:       Hexa core AMD FX-6300 Six-Core (-MCP-) cache: 12288 KB 
           clock speeds: max: 3500 MHz 1: 1400 MHz 2: 1400 MHz 3: 1400 MHz 4: 1400 MHz 5: 1400 MHz 6: 1400 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Tahiti PRO [Radeon HD 7950/8950 OEM / R9 280]
           Display Server: X.Org 1.16.4 driver: radeon
           Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz, 1920x1080@60.00hz
           GLX Renderer: Gallium 0.4 on AMD TAHITI GLX Version: 3.0 Mesa 10.3.2
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series]
           driver: snd_hda_intel
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA) driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 08:62:66:29:51:f0
Drives:    HDD Total Size: 5121.0GB (21.8% used) ID-1: /dev/sda model: WDC_WD1002FAEX size: 1000.2GB
           ID-2: /dev/sdb model: SSD2SC120G1SA754 size: 120.0GB
           ID-3: USB /dev/sdc model: My_Book_1230 size: 4000.8GB
Partition: ID-1: / size: 437G used: 8.1G (2%) fs: ext4 dev: /dev/sda4
Sensors:   System Temperatures: cpu: 10.9C mobo: N/A gpu: 39.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 183 Uptime: 2 days Memory: 964.6/7905.7MB Client: Shell (bash) inxi: 2.2.28

Offline

#39 2016-01-21 18:13:31

Head_on_a_Stick
Member
From: London
Registered: 2015-09-29
Posts: 9,093
Website

Re: Post your Bunsenlabs linux system specs

empty@TheLab:~$ inxi -F
System:    Host: TheLab Kernel: 3.16.0-4-amd64 x86_64 (64 bit) Desktop: Openbox 3.5.2 
           Distro: BunsenLabs 8.2 bunsen-hydrogen 
Machine:   System: innotek product: VirtualBox v: 1.2
           Mobo: Oracle model: VirtualBox v: 1.2 Bios: innotek v: VirtualBox date: 12/01/2006
CPU:       Dual core Intel Core i5-4330M (-MCP-) cache: 3072 KB 
           Clock Speeds: 1: 2793 MHz 2: 2793 MHz
Graphics:  Card: InnoTek Systemberatung VirtualBox Graphics Adapter
           Display Server: X.Org 1.16.4 drivers: ati,vboxvideo (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.00hz
           GLX Renderer: Chromium GLX Version: 2.1 Chromium 1.9
Audio:     Card Intel 82801AA AC'97 Audio Controller driver: snd_intel8x0 Sound: ALSA v: k3.16.0-4-amd64
Network:   Card: Intel 82540EM Gigabit Ethernet Controller driver: e1000
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 08:00:27:8b:a2:22
Drives:    HDD Total Size: 53.7GB (9.7% used) ID-1: /dev/sda model: VBOX_HARDDISK size: 53.7GB
Partition: ID-1: / size: 48G used: 2.9G (7%) fs: ext4 dev: /dev/sda1 
           ID-2: swap-1 size: 2.22GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 120 Uptime: 3 min Memory: 217.0/3963.8MB Client: Shell (bash) inxi: 2.1.28

tongue

Para todos todo, para nosotros nada

Offline

#40 2016-01-21 20:08:00

Sector11
Mod Squid Tpyo Knig
From: Upstairs
Registered: 2015-08-20
Posts: 8,030

Re: Post your Bunsenlabs linux system specs

^  But but but ... I though you used BSD!   wink
Mine don't change:

System:    Host: bunsen Kernel: 3.16.0-4-amd64 x86_64 (64 bit gcc: 4.8.4) Desktop: Openbox 3.5.2 dm: lightdm
           Distro: BunsenLabs 8.2 bunsen-hydrogen
Machine:   Mobo: ECS model: MCP61M-M3 v: 7.0 Bios: American Megatrends v: 080015 date: 11/03/2010
CPU:       Triple core AMD Athlon II X3 450 (-MCP-) cache: 1536 KB
           flags: (lm nx sse sse2 sse3 sse4a svm) bmips: 19287
           Clock Speeds: 1: 3214 MHz 2: 3214 MHz 3: 3214 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 210] bus-ID: 02:00.0 chip-ID: 10de:0a65
           Display Server: X.Org 1.16.4 driver: nvidia Resolution: 1920x1080@60.00hz
           GLX Renderer: GeForce 210/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 340.93 Direct Rendering: Yes
Audio:     Card-1 NVIDIA MCP61 High Definition Audio driver: snd_hda_intel bus-ID: 00:05.0 chip-ID: 10de:03f0
           Card-2 NVIDIA High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 02:00.1 chip-ID: 10de:0be3
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card: NVIDIA MCP61 Ethernet driver: forcedeth port: d480 bus-ID: 00:07.0 chip-ID: 10de:03ef
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 500.1GB (15.9% used)
           ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB serial: WD-WCC2EMF62817
Partition: ID-1: / size: 20G used: 6.8G (37%) fs: ext4 dev: /dev/sda8
           ID-2: /media/14 size: 43G used: 52M (1%) fs: ext4 dev: /dev/sda14
           ID-3: /media/5 size: 197G used: 64G (34%) fs: ext4 dev: /dev/sda5
           ID-4: /home size: 20G used: 2.0G (11%) fs: ext4 dev: /dev/sda9
           ID-5: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
Sensors:   System Temperatures: cpu: 47.0C mobo: 41.0C gpu: 0.0:53C
           Fan Speeds (in rpm): cpu: 2782 fan-2: 0 fan-3: 0
Weather:   Conditions: 82 F (28 C) - Scattered Clouds Wind: From the ESE at 13 MPH Humidity: 66%
           Pressure: 29.98 in (1015 mb) Time: January 21, 5:07 PM ART (America/Argentina/Buenos_Aires)
Info:      Processes: 159 Uptime: 7:03 Memory: 667.9/5985.6MB
           Init: systemd v: 215 runlevel: 5 Gcc sys: 4.9.2 alt: 4.8
           Client: Shell (bash 4.3.301 running in /usr/bin/termin) inxi: 2.1.28

... often.

Debian 12 Beardog, SoxDog and still a Conky 1.9er

Offline

Pages: 1 2 3 4

  1. Index
  2. » Off Topic
  3. » Post your Bunsenlabs linux system specs

Board footer

Powered by FluxBB